Optical, structural and antibacterial properties of phase heterostructured Fe2O3-CuO-CuFe2O4 nanocomposite.

The synthesis of the Fe2O3-CuO-CuFe2O4 nanocomposite was effectively achieved through the sol-gel technique, utilizing ethanol as a reactive fuel. Investigation of the nanocomposite's structure via X-ray Diffraction confirmed the coexistence of Fe2O3, CuO, and CuFe2O4 phases within the material. The Scherrer equation was applied to determine an average crystallite size ranging from 60 to 95 nm. UV-visible spectroscopy studies suggested the material possesses an approximate energy bandgap of 4 eV. Scanning Electron Microscopy provided insights into the nanocomposite's surface morphology, which exhibited a porous and heterogeneous aggregation of particles in various sizes and shapes. When tested for antibacterial efficacy, the nanocomposite exhibited activity against gram-positive S. aureus with a maximum zone of inhibition (ZOI) measuring 9 mm at the highest concentration, whereas no inhibitory effect was detected against gram-negative E.coli.

Silver nanoparticles biosynthesis using mixture of Lactobacillus sp. and Bacillus sp. growth and their antibacterial activity.

The biosynthesis of nanoparticles offers numerous advantages, including ease of production, cost-effectiveness, and environmental friendliness. In our research, we focused on the bioformation of silver nanoparticles (AgNPs) using a combination of Lactobacillus sp. and Bacillus sp. growth. These AgNPs were then evaluated for their biological activities against multidrug-resistant bacteria. Our study involved the isolation of Bacillus sp. from soil samples and Lactobacillus sp. from raw milk in Dhamar Governorate, Yemen. The synthesized AgNPs were characterized using various techniques such as UV-visible spectroscopy, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), and transmission electron microscopy (TEM). The antibacterial properties of the AgNPs were assessed using the modified Kirby Bauer disk diffusion method against multidrug-resistant strains of Staphylococcus aureus and Pseudomonas aeruginosa. Our results demonstrated that the use of a bacterial mixture for biosynthesis led to faster and more effective production of AgNPs compared to using a single bacterium. The UV-visible spectra showed characteristic peaks indicative of silver nanoparticles, while XRD analysis confirmed the crystalline nature of the synthesized particles. FTIR results suggested the presence of capping proteins that contribute to the synthesis and stability of AgNPs. Furthermore, TEM images revealed the size and morphology of the AgNPs, which exhibited spherical shapes with sizes ranging from 4.65 to 22.8 nm. Notably, the antibacterial activity of the AgNPs was found to be more pronounced against Staphylococcus aureus than Pseudomonas aeruginosa, indicating the potential of these nanoparticles as effective antimicrobial agents. Overall, our study highlights the promising antibacterial properties of AgNPs synthesized by a mixture of Lactobacillus sp. and Bacillus sp. growth. Further research is warranted to explore the potential of utilizing different bacterial combinations for enhanced nanoparticle synthesis.

Biofabrication of Mg-doped ZnO nanostructures for hemolysis and antibacterial properties.

The aim of this work was to synthesize 0.02 and 0.06 Mg-doped ZnO nanoparticles (NPs) using the aqueous extract of Plectranthus barbatus leaf. The structural integrity of the hexagonal phase was emphasized by X-ray diffraction analysis. The average crystallite size (D) of 0.02 and 0.06 Mg-doped ZnO NPs was found to be 23.83 and 26.95 nm, respectively. The scanning electron microscope images revealed a surface morphology of irregular nano-shapes of about 83 nm diameter with an elongated one-dimensional structure. The hemolysis activity demonstrated the safe nature of the synthesized materials at low doses. Antibacterial activity against S. aureus and E. coli, which assessed using the disc diffusion method, indicated that the prepared NPs could inhibit S. aureus but not E. coli. These findings suggest that the synthesized NPs could be explored for potential applications in biotechnology and medicine.

Lepidium sativum Seed Extract-Mediated Synthesis of Zinc Oxide Nanoparticles: Structural, Morphological, Optical, Hemolysis, and Antibacterial Studies.

Nanomaterials have unique physicochemical properties compared to their bulk counterparts. Besides, biologically synthesized nanoparticles (NPs) have proven superior to other methods. This work aimed to biosynthesize zinc oxide (ZnO) NPs using an aqueous extract of Lepidium sativum seed. The obtained ZnO NPs were characterized by X-ray diffraction, scanning electron microscopy, Fourier transform infrared, and ultraviolet-visible spectroscopy. The in vitro antibacterial activity of ZnO NPs against Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria was assessed using the disk diffusion technique. The hemolytic impact was quantified spectrophotometrically. The results indicated a 24.2 nm crystallite size, a hexagonal structure phase, and a 3.48 eV optical bandgap. Antibacterial studies revealed a dose-dependent response with comparable activity to the standard drug (gentamicin) and higher activity against S. aureus than E. coli, e.g., the zone of inhibition at 120 mg/mL was 23 ± 1.25 and 16 ± 1.00 mm, respectively. The hemolysis assay showed no potential harm due to ZnO NPs toward red blood cells if utilized in low doses. As a result, it could be concluded that the reported biogenic method for synthesizing ZnO NPs is promising, resulting in hemocompatible NPs and comparable bactericidal agents.

Effect of copper oxide (CuO) and vanadium oxide (V2O5) addition on the structural, optical and electrical properties of corundum (α-Al2O3).

In this work, we prepared a pure α-Al2O3, α-Al2O3/CuO (AC) and α-Al2O3/V2O5 (AV) nanocomposite. The sol-gel method was used to prepare pure α-Al2O3, (AC) and (AV) samples at 1200 °C. Structural, electrical, and optical properties of the prepared samples were investigated using the X-ray diffraction (XRD), UV-Visible spectrophotometer, and conductivity meter, respectively. The XRD results confirmed the crystalline nature and the presence of the hexagonal structure of α-Al2O3, the rhombohedra structure of CuAlO2 and the tetragonal structure of V2O5. Moreover, the crystallite size of pure α-Al2O3 was 43.1 nm, while the crystallite size of α-Al2O3 in samples AC and AV nanocompsite was 24.05 nm and 34.84 nm respectively. The optical measurements showed that the band gap α-Al2O3 decreased significantly from 5.28 eV for pure to 3.7 and 3.4 eV to AC and AV respectively. The DC electrical conductivity (σd.c) values were measured for all prepared samples at room temperature. The electrical conductivity was 2.4 × 10-7 and 1.8 × 10-7 (Ω cm)-1 in AC and AV nanocompsite respectively, while ionic conductivity (σion) decreased from 3 × 10-10 in pure α-Al2O3 to 7 × 10-5 and 1 × 10-5 in AC and AV nanocompsite, respectively. The results showed an improvement in the structural, optical, and electrical properties, which may make these materials a candidate for use in many applications, such as photocatalytic, gas sensors, optoelectronics, microelectronics, semiconductor devices, ……etc.

Synthesis of trimetallic oxide (Fe2O3-MgO-CuO) nanocomposites and evaluation of their structural and optical properties.

In this paper, tri-phase Fe2O3-MgO-CuO nanocomposites (NCs) and pure CuO, Fe2O3 and MgO nanoparticles (NPs) were prepared using sol-gel technique. The physical properties of the prepared products were examined using SEM, XRD, and UV-visible. The XRD data indicated the formation of pure CuO, Fe2O3 and MgO NPs, as well as nanocomposite formation with Fe2O3 (cubic), MgO (cubic), and CuO (monoclinic). The crystallite size of all the prepared samples was calculated via Scherrer's formula. The energy bandgap of CuO, Fe2O3 and MgO and Fe2O3-MgO-CuO NCs were computed from UV-visible spectroscopy as following 2.13, 2.29, 5.43 and 2.96 eV, respectively. The results showed that Fe2O3-MgO-CuO NCs is an alternative material for a wide range of applications as optoelectronics devices due to their outstanding properties.