Novel composite from chitosan and a metal-organic framework for removal of tartrazine dye from aqueous solutions; adsorption isotherm, kinetic, and optimization using Box-Benkhen design.

Cosmetics, textiles, foodstuffs, and medicines frequently contain the yellow dye tartrazine. It has carcinogenic properties and can trigger allergies. In this study, a unique NH2-MIL-101(Cr)/chitosan composite (MIL/chitosan composite) was created using a hydrothermal process. The effectiveness of this composite in removing Tartrazine (TZ) from aqueous solutions was investigated. It was characterized via FT-IR, XPS, XRD, and BET analysis. The surface area of the MIL/chitosan nanoadsorbent sample was 1256.64 m2/g, where after five times recycling, it was reduced to 1068.14 m2/g. The study analyzed the impact of dye concentration, pH, temperature, and MIL/chitosan composite dosage. Experimental measurements were taken for the equilibrium isotherms of dye adsorption. The kinetic models and adsorption isotherm were used to analyze the results. The adsorption process was found to match Langmuir and pseudo-second-order kinetic models. Chemisorption was the mechanism of the adsorption process. Based on thermodynamic parameters, it was determined that the adsorption process was endothermic. The MIL/chitosan composite was recycled up to five cycles. Using the MIL/chitosan composite towards the adsorption of the tartrazine from the real sample has been checked. The interaction process between the MIL/chitosan nanoadsorbent and Tartrazine adsorbate has been investigated. The TZ electrical characteristics, reactivity, and shape were ascertained through the application of density functional theory (DFT). The placement of electrophilic and nucleophilic attack sites is in good agreement with the molecular orbitals (HOMO and LUMO) and MEP results, according to DFT. The optimization of adsorption results was accomplished using Box-Behnken design (BBD).

A comprehensive review on the application of semiconducting materials in the degradation of effluents and water splitting.

In this comprehensive review article, we delve into the critical intersection of environmental science and materials science. The introduction sets the stage by emphasizing the global water shortage crisis and the dire consequences of untreated effluents on ecosystems and human health. As we progress into the second section, we embark on an intricate exploration of piezoelectric and photocatalytic principles, illuminating their significance in wastewater treatment and sustainable energy production. The heart of our review is dedicated to a detailed analysis of the detrimental impacts of effluents on human health, underscoring the urgency of effective treatment methods. We dissected three key materials in the realm of piezo-photocatalysis: ZnO-based materials, BaTiO3-based materials, and bismuth-doped materials. Each material is scrutinized for its unique properties and applications in the removal of pollutants from wastewater, offering a comprehensive understanding of their potential to address this critical issue. Furthermore, our exploration extends to the realm of hydrogen production, where we discuss various types of hydrogen and the role of piezo-photocatalysis in generating clean and sustainable hydrogen. By illuminating the synergistic potential of these advanced materials and technologies, we pave the way for innovative solutions to the pressing challenges of water pollution and renewable energy production. This review article not only serves as a valuable resource for researchers and scholars in the fields of material science and environmental engineering but also underscores the pivotal role of interdisciplinary approaches in addressing complex global issues.

Giant staghorn stone causing inferior vena cava compression: a novel case report.

Staghorn calculi (SC) are defined as large kidney stones that fill the renal pelvis and at least one renal calyx. They represent 10-20% of all renal stones in developing countries and require prompt diagnosis and management. Massive SC (over 5 cm) are treated exclusively via open surgery, despite percutaneous nephrolithotomy (PCNL) being the gold standard treatment for large stones. Descriptions of PCNL for massive SC are very limited in the literature. Case Presentation: We report a case of a 63-year-old male who presented with chronic abdominal pain, hepatosplenomegaly, and normal renal function. He was later diagnosed with polycythemia vera. Computed tomography of the abdomen revealed massive, bilateral staghorn stones measuring 7.3×5.5 cm and 1.8×4.5 cm on the right and left, respectively. Additionally, the right stone was found to be compressing the inferior vena cava (IVC). The patient was promptly scheduled for right-sided PCNL and the target of 80% stone fragmentation was successfully attained. Discussion: We present the first case of a stone of such size in the Middle East, as well as the first known case of a renal stone compressing the IVC. Unlike previous reports, the stone was successfully fragmented via PCNL - a procedure that has not been described for stones of such size. Conclusion: This report highlights that ultrasound-guided PNCL without any other intervention is sufficient for the successful treatment of giant SC. Greater research is needed on the potential utility of using ultrasound-guided PCNL for the fragmentation of stones sized over 5 cm.

An inclusive outlook on the fate and persistence of pesticides in the environment and integrated eco-technologies for their degradation.

Intensive and inefficient exploitation of pesticides through modernized agricultural practices has caused severe pesticide contamination problems to the environment and become a crucial problem over a few decades. Due to their highly toxic and persistent properties, they affect and get accumulated in non-target organisms, including microbes, algae, invertebrates, plants as well as humans, and cause severe issues. Considering pesticide problems as a significant issue, researchers have investigated several approaches to rectify the pesticide contamination problems. Several analyses have provided an extensive discussion on pesticide degradation but using specific technology for specific pesticides. However, in the middle of this time, cleaner techniques are essential for reducing pesticide contamination problems safely and environmentally friendly. As per the research findings, no single research finding provides concrete discussion on cleaner tactics for the remediation of contaminated sites. Therefore, in this review paper, we have critically discussed cleaner options for dealing with pesticide contamination problems as well as their advantages and disadvantages have also been reviewed. As evident from the literature, microbial remediation, phytoremediation, composting, and photocatalytic degradation methods are efficient and sustainable and can be used for treatment at a large scale in engineered systems and in situ. However, more study on the bio-integrated system is required which may be more effective than existing technologies.

Prevalence and Risk Factors of Venous Thromboembolism in Critically Ill Patients with Severe COVID-19 and the Association between the Dose of Anticoagulants and Outcomes.

Introduction: COVID-19 is characterized by a procoagulant state that increases the risk of venous and arterial thrombosis. The dose of anticoagulants in patients with severe COVID-19 pneumonia without suspected or confirmed thrombosis has been debated. Aim of the study: We evaluated the prevalence, predictors, and outcomes of venous thromboembolism (VTE) in critically ill COVID-19 patients and assessed the association between the dose of anticoagulants and outcomes. Materials and methods: This retrospective cohort included patients with COVID-19 who were admitted to the ICU between March and July 2020. Patients with clinically suspected and confirmed VTE were compared to those not diagnosed to have VTE. Results: The study enrolled 310 consecutive patients with severe COVID-19 pneumonia: age 60.0±15.1 years, 67.1% required mechanical ventilation and 44.7% vasopressors. Most (97.1%) patients received anticoagulants during ICU stay: prophylactic unfractionated heparin (N=106), standard-dose enoxaparin (N=104) and intermediate-dose enoxaparin (N=57). Limb Doppler ultrasound was performed for 49 (15.8%) patients and chest computed tomographic angiography for 62 (20%). VTE was diagnosed in 41 (13.2%) patients; 20 patients had deep vein thrombosis and 23 had acute pulmonary embolism. Patients with VTE had significantly higher D-dimer on ICU admission. On multivariable Cox regression analysis, intermediate-dose enoxaparin versus standard-dose unfractionated heparin or enoxaparin was associated with lower VTE risk (hazard ratio, 0.06; 95% confidence interval, 0.01-0.74) and lower risk of the composite outcome of VTE or hospital mortality (hazard ratio, 0.42; 95% confidence interval, 0.23-0.78; p=0.006). Major bleeding was not different between the intermediate- and prophylactic-dose heparin groups. Conclusions: In our study, clinically suspected and confirmed VTE was diagnosed in 13.2% of critically ill patients with COVID-19. Intermediate-dose enoxaparin versus standard-dose unfractionated heparin or enoxaparin was associated with decreased risk of VTE or hospital mortality.

Deep Eutectic Solvent (DES)-Mediated One-Pot Multicomponent Green Approach for Naphthalimide-Centered Acridine-1,8-dione Derivatives and Their Photophysical Properties.

An efficient and green methodology to assemble various functionalized naphthalimide-centered acridine-1,8-dione derivatives involving a one-pot multicomponent protocol has successfully been developed. Herein, a variety of aromatic aldehydes, 1,3-diketones, 1,8-naphthanoic anhydride, and hydrazine hydrate have been condensed under a reusable, inexpensive, and biodegradable deep eutectic solvent (DES) of N,N'-dimethyl urea and l-(+)-tartaric acid to obtain the desired targets under operationally mild reaction conditions with outstanding conversions. Strikingly, in this strategy, the DES plays a dual role of a catalyst and solvent and was recycled efficiently in four consecutive runs with no substantial drop in the yield of the desired product. Interestingly, the easy recovery and high reusability of the DES make this simple yet efficient protocol environmentally desirable. Moreover, the preliminary photophysical properties of thus-prepared valuable molecules have also been investigated by ultraviolet-visible (UV-vis) and fluorescence spectroscopy.

Improving the Thermal Behavior and Flame-Retardant Properties of Poly(o-anisidine)/MMT Nanocomposites Incorporated with Poly(o-anisidine) and Clay Nanofiller.

The synthesis of MMT and poly(o-anisidine) (MMT/POA) clay nanocomposites was carried out by using the chemical oxidative polymerization of POA and MMT clay with POA, respectively. By maintaining the constant concentration of POA, different percentage loads of MMT clay were used to determine the effect of MMT clay on the properties of POA. The interaction between POA and MMT clay was investigated by FTIR spectroscopy, and, to reveal the complete compactness and homogeneous distribution of MMT clay in POA, were assessed by using scanning-electron-microscope (SEM) analysis. The UV-visible spectrum was studied for the optical and absorbance properties of MMT/POA ceramic nanocomposites. Furthermore, the horizontal burning test (HBT) demonstrated that clay nanofillers inhibit POA combustion.

Design, Synthesis, and Spectroscopic Studies of Some New α-Aminophosphonate Analogues Derived from 4-Hydroxybenzaldehyde with Special Reference to Anticancer Activity.

Introduction: As biological activity components, α-aminophosphonates and their moieties play important roles in medicinal chemistry. Alpha-phosphonic acids are significant α-amino acid counterparts. Due to its strong biological activity, this class of molecule has recently been discovered to have numerous medical applications. Results and Discussion: A new class of α-aminophosphonates and arylidene derivatives was synthesized. Various spectroscopic and elemental analyses were used to confirm the prepared products. The produced materials were tested as anticancer against breast carcinoma cells and normal human cells (PBMC). Besides the analysis results, it was found that (7b, 4c, 5k, 6, 5a, 7c, 5f, 5b, and 5g) against MCF-7 line cells. As a reference anticancer drug, 5-fluorouracil was used. The anticancer activities showed that the compounds 7b, 4c, containing α-aminophosphonate and Schiff base groups, respectively, showed high inhibition activity against the MCF-7 cell line, with 94.32% and 92.45% inhibition compared to the inhibition by 5-FU with 96.02% inhibition. The results showed that the compounds 5k, 7b, 6, and 5a, respectively, had very low activity against normal human cells PBMC, with 12.77%, 13%, 13.13%, and 17.88% inhibition compared to the inhibition by 5-FU with 12.50% inhibition. The binding energy for non-bonding interactions between the ligand (studied compounds) and receptor, thymidylate synthase, was determined using molecular docking (pdb code: 1AN5). Conclusion: α-aminophosphonate derivatives, arylidines, and disphosphonate derivatives derived from 4-hydroxybenzaldehyde were synthesized, purified, elucidated by spectroscopic analysis, and finally tested against carcinoma breast cancer to give high to moderate to low activity.

A well-defined S-g-C3N4/Cu-NiS heterojunction interface towards enhanced spatial charge separation with excellent photocatalytic ability: synergetic effect, kinetics, antibacterial activity, and mechanism insights.

A well-defined heterojunction among two dissimilar semiconductors exhibited enhanced photocatalytic performance owing to its capability for boosting the photoinduced electron/hole pair transportation. Therefore, designing and developing such heterojunctions using diverse semiconductor-based materials to enhance the photocatalytic ability employing various approaches have gained research attention. For this objective, g-C3N4 is considered as a potential photocatalytic material for organic dye degradation; however, the rapid recombination rate of photoinduced charge carriers restricts the widespread applications of g-C3N4. Henceforth, in the current study, we constructed a heterojunction of S-g-C3N4/Cu-NiS (SCN/CNS) two-dimensional/one-dimensional (2D/1D) binary nanocomposites (NCs) by a self-assembly approach. XRD results confirm the construction of 22% SCN/7CNS binary NCs. TEM analysis demonstrates that binary NCs comprise Cu-NiS nanorods (NRs) integrated with nanosheets (NSs) such as the morphology of SCN. The observed bandgap value of SCN is 2.69 eV; nevertheless, the SCN/CNS binary NCs shift the bandgap to 2.63 eV. Photoluminescence spectral analysis displays that the electron-hole pair recombination rate in the SCN/CNS binary NCs is excellently reduced owing to the construction of the well-defined heterojunction. The photoelectrochemical observations illustrate that SCN/CNS binary NCs improve the photocurrent to ∼0.66 mA and efficiently suppress the electron-hole pairs when compared with that of undoped NiS, CNS and SCN. Therefore, the 22% SCN/7CNS binary NCs efficiently improved methylene blue (MB) degradation to 99% for 32 min under visible light irradiation.

Facile and Green Synthesis of Silver Quantum Dots Immobilized onto a Polymeric CTS-PEO Blend for the Photocatalytic Degradation of p-Nitrophenol.

Immobilization of inorganic metal quantum dots (especially, noble transition metals) onto organic polymers to synthesize nanometal-polymer composites (NMPCs) has attracted considerable attention because of their advanced optical, electrical, catalytic/photocatalytic, and biological properties. Herein, novel, highly efficient, stable, and visible light-active NMPC photocatalysts consisting of silver quantum dots (Ag QDs) immobilized onto polymeric chitosan-polyethylene oxide (CTS-PEO) blend sheets have been successfully prepared by an in situ self-assembly facile casting method as a facile and green approach. The CTS-PEO blend polymer acts as a reducing and a stabilizing agent for Ag QDs which does not generate any environmental chemical pollutant. The prepared x wt % Ag QDs/CTS-PEO composites were fully characterized through X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis, and UV/visible spectroscopy. The characterization results indicated the successful synthesis of the Ag QDs/CTS-PEO composites by the interactions and complexation between x wt % Ag QDs and CTS-PEO blend sheets. TEM images revealed small granules randomly distributed onto the CTS-PEO blend sheets, indicating the immobilization of Ag QDs onto CTS-PEO composites. The presence of a surface plasmon resonance (SPR) band and the shifting of the absorption edge toward higher wavelengths in the UV/vis spectra indicated the formation of x wt % Ag QDs/CTS-PEO composites. The Ag QDs in the polymeric blend matrix led to remarkable enhancement in the optical, thermal, electrical, and photocatalytic properties of x wt % Ag QDs/CTS-PEO composites. The photocatalytic efficiency of the prepared composites was evaluated by the photodegradation of p-nitrophenol (PNP) under simulated sunlight. The maximum photocatalytic degradation reached 91.1% efficiency within 3 h for the 12.0 wt % Ag QDs/CTS-PEO photocatalyst. Generally, the Ag QDs immobilized onto CTS-PEO blend composites significantly enhance the SPR effect and the synergistic effect and reduce the band gap, leading to a high photocatalytic activity.