RESUMEN
In hot and humid climates, a significant part of the energy is used to cool the building. There are several ways to reduce this air conditioning load, but one standout is through the selection and design of the right building envelope and its components. The thermal characteristics of the building envelope, in particular the thermal resistance of the insulation used, have an impact on the thermal and energy performance of building structures. Thermal conductivity, which indicates the ability of heat to move through a material given a temperature difference, is the primary factor affecting the performance of a thermal insulation material. Both temperature and humidity changes can affect a material's thermal conductivity value, which can then change. In fact, due to the fluctuating ambient air temperature and solar radiation, thermal insulation in buildings is susceptible to significant and continuous temperature variations. Thermal insulation used in building walls and roofs helps to reduce the energy demand of the building. It improves thermal comfort and, if used correctly, reduces the operational cost of the building. The present study has focused on the effects of location and insulation material on the energy performance of a residential building by considering five climatic locations in the Kingdom of Saudi Arabia (KSA). Five commonly used insulation materials with different thermal characteristics, namely polyurethane board (PU), expanded polystyrene (EPS), glass wool (GW), urea-formaldehyde foam (UFF), and expanded perlite (EP), were analyzed under various climatic zones as per the Saudi Building Code 601/602. The selected cities were categorized based on cooling degree days (CDD) and outdoor dry bulb temperature (DBT) as hot, very hot, and extremely hot climatic zones. Insulation improves thermal comfort and, if used correctly, reduces running costs. Experiments were conducted to determine the thermal conductivity, and the energy simulation was performed by employing IES-VE software for various insulation options. The findings indicate that the location has a significant impact on the energy performance of the insulating materials. The energy saving potential of polyurethane board (PU) insulation is more attractive in cities with higher DBTs and CDDs than in cities with lower DBTs and CDDs. The benefit of installing insulation ranged from a 2 to 14% decrease in energy demand for the climate zones studied. The sensitivity analysis showed that the energy saving potential of the insulation materials is sensitive to the set-point temperature (ST) band.
RESUMEN
Deterioration of asphalt pavements due to massive load of vehicles and climatic variation has demanded the use of pavements construction material with an excellent resilience characteristic, resistance to permanent deformation, and most importantly, a much longer service lifespan. The main structural distresses in pavement construction are permanent deformation at high temperatures and fatigue cracking under repetitive traffic loadings. To comprehensively investigate the performance of bitumen penetration grade (PG) 70 against rutting, fatigue, and high temperature cracking in hot mix asphalt (HMA) pavements, polycarbonate (PC) and polytetrafluoroethylene (PTFE) were used. The investigation of the internal structure, rheological, and physical properties of base and modified bitumen (MB) mixes with different percentages of modifiers (0%, 2.5%, and 5%) by weight were performed via scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR) analysis, X-ray diffraction (XRD) pattern analysis, rolling thin-film oven test (RTFOT), pressurized aging vessel (PAV), dynamic shear rheometer (DSR), rotational viscosity (RV), and bending beam rheometer (BBR). The results of the RV test indicate that modification of neat bitumen with polycarbonate and polytetrafluoroethylene increased the viscosity for polycarbonate-modified bitumen (PCMB), polytetrafluoroethylene-modified bitumen (PTFEMB), and for a blend of PCMB-PTFEMB by 44%, 50%, and 55.75% at 135 °C and 111.10%, 127.80%, and 138.88% at 165 °C, accordingly. BBR test results revealed that modifiers increased the rigidity of neat bitumen by 74.8%, 75.8%, and 74.5% at -16 °C, -22 °C, and -28 °C, respectively.
RESUMEN
Polyaniline (PANI), which is a member of the family of electrically conducting polymers, has been widely discussed as a potential membrane for wastewater treatment. Although a steady growth in PANI literature was observed, analyzing PANI literature quantitatively is still a novelty. The main aim of this study is to unearth the current research status, global trends, and evolution of PANI membranes literature and their use in water treatment applications over time. For this purpose, a scientometric study was performed consisting of bibliometric and bibliographic analysis. A total of 613 entities were extracted from Web of Science published during the last 50 years and were analyzed to map trends based on leading peer-reviewed journals, publication records, leading research disciplines, countries, and organizations. The study shows that the number of annual publications increased exponentially from 2005 to 2020 and is expected to keep increasing in the current decade. The Journal of Membrane Science published the highest number of articles and was identified as the most-cited journal in the field. China, India, and the USA were observed as the top three research hubs. The top-ranked authors in the field were Wang, Jixiao, and Wang, Zhi. To find research trends, four different clusters of keywords were generated and analyzed. The top five most frequent keywords turn out to be polyaniline, water, performance, membranes, and nanoparticles. The analysis suggests that the application of nanotechnology for modifying PANI membranes (using nanoparticles, nanotubes, and graphene specifically) is the future of this field. This study elucidates the research streamline of the field that may serve as a quick reference for early career researchers and industries exploring this field.
RESUMEN
The scientometric analysis is statistical scrutiny of books, papers, and other publications to assess the "output" of individuals/research teams, organizations, and nations, to identify national and worldwide networks, and to map the creation of new (multi-disciplinary) scientific and technological fields that would be beneficial for the new researchers in the particular field. A scientometric review of 3D printing concrete is carried out in this study to explore the different literature aspects. There are limitations in conventional and typical review studies regarding the capacity of such studies to link various elements of the literature accurately and comprehensively. Some major problematic phases in advanced level research are: co-occurrence, science mapping, and co-citation. The sources with maximum articles, the highly creative researchers/authors known for citations and publications, keywords co-occurrences, and actively involved domains in 3D printing concrete research are explored during the analysis. VOS viewer application analyses bibliometric datasets with 953 research publications were extracted from the Scopus database. The current study would benefit academics for joint venture development and sharing new strategies and ideas due to the graphical and statistical depiction of contributing regions/countries and researchers.
RESUMEN
Due to their simple synthesis method and excellent properties, such as superior adsorption and regeneration capabilities, with a large surface area and tunable pores, metal-organic frameworks (MOFs) have emerged as a suitable option for wastewater treatment. Although an exponential growth in MOF literature has been observed in recent years, conducting a quantitative literature analysis of MOF application in wastewater treatment is a novelty. To fill this gap, a total of 1187 relevant publications were extracted from the Web of Science, published during the last 50 years, and analyzed using bibliometric and content analysis techniques. A bibliometric analysis was conducted to reveal growing publication trends, leading journals, prolific countries, and organizations; whereas, a content analysis was used to highlight key research themes and hot topics in this field. The analyses revealed that there is a strong international collaboration among authors, countries, and organizations. Chemical Engineering Journal, Journal of Hazardous Materials, and Journal of Environmental Chemical Engineering are the most prolific journals in this field. Furthermore, the use of MOFs for removing antibiotics from wastewater was identified as a recent hot topic. In addition, performance enhancements of MOFs, in terms of a higher adsorption capacity and water stability, were identified as topics of great interest. To cater to these issues, the application of graphene, graphene oxides, nanoparticles, and quantum dots was also observed in the research fronts in this field.