Interaction between the substrate and probe in liquid metal Ga: experimental and theoretical analysis.

Interaction between two bodies in a liquid metal is an important topic for development of metallic products with high performance. We conducted atomic force microscopy measurements and achieved the interaction between the substrate and the probe in liquid Ga of an opaque and highly viscous liquid. The interaction cannot be accessed with the normal atomic force microscopy, electron microscopy, and beam reflectometry. We performed a theoretical calculation using statistical mechanics of simple liquids by mixing an experimentally derived quantum effect. From both experiment and theory, we found an unusual behaviour in the interaction between the solvophobic substances, which has never been reported in water and ionic liquids. Shapes of the interaction curves between several solvophobic and solvophilic pairs in liquid Ga are also studied.

Nonadditivities of the Particle Sizes Hidden in Model Pair Potentials and Their Effects on Physical Adsorptions.

It is important to understand the mechanism of colloidal particle assembly near a substrate for development of drug delivery systems, micro-/nanorobots, batteries, heterogeneous catalysts, paints, and cosmetics. Understanding the mechanism is also important for crystallization of the colloidal particles and proteins. In this study, we calculated the physical adsorption of colloidal particles on a flat wall mainly using the integral equation theory, wherein small and large colloidal particles were employed. In the calculation system, like-charged electric double-layer potentials were used as pair potentials. In some cases, it was found that the small particles are more easily adsorbed. This result is unusual from the viewpoint of the Asakura-Oosawa theory, and we call it a "reversal phenomenon". Theoretical analysis revealed that the reversal phenomenon originates from the nonadditivities of the particle sizes. Using the knowledge obtained from this study, we invented a method to analyze the size nonadditivity hidden in model pair potentials. The method will be useful for confirmation of various simulation results regarding the adsorption and development of force fields for colloidal particles, proteins, and solutes.

Comparison of atomic force microscopy force curve and solvation structure studied by integral equation theory.

Atomic force microscopy can observe structures of liquids (solvents) on solid surfaces as oscillating force curves. The oscillation originates from the solvation force, which is affected by the interaction between the probe, substrate, and solvents. To investigate the effects of the interactions on the force curve, we calculated the force curves by integral equation theory with various probe and substrate conditions. The probe solvophilicity affected the force curves more than the substrate solvophilicity in our calculation, and its reason is qualitatively explained by the amount of the desolvated solvents. We evaluated the probes and parameters in terms of the qualitative estimation of the number density distribution of the solvent on the wall. The negative of the force curve's derivative with respect to the surface separation reflected the number density distribution better than the force curve. This parameter is based on the method that is proposed previously by Amano et al. [Phys. Chem. Chem. Phys. 18, 15534 (2016)]. The normalized frequency shift can also be used for the qualitative estimation of the number density distribution if the cantilever amplitude is small. Solvophobic probes reflected the number density distribution better than the solvophilic probes. Solvophilic probes resulted in larger oscillation amplitudes than solvophobic probes and are suitable for measurements with a high S/N ratio.

Reactivity of Zinc Cations under Spontaneous Accumulation of Hydrophobic Coexisting Cations in Hydrophobic Nanoporous Silicon.

The ion enrichment behavior due to surface-induced phase separation and the concomitant phase transition of electrolyte solutions between a liquid and a solid confined within nanopores of porous silicon is examined using concentrated aqueous solutions. We performed open-circuit potential measurements and differential scanning calorimetry (DSC) while varying the concentration of aqueous tetraethylammonium chloride (TEACl) solution. Open-circuit potential measurements revealed that the local OH- concentration within the nanopores increases as the bulk TEACl concentration increases. DSC measurements indicated that TEA+ cations are enriched within the nanopores and an extremely high concentration of TEA+ remarkably increases the local OH- concentration. This increase in the local pH should realize the selective precipitation of metal hydroxides within the nanopores. However, such precipitation was not observed in our investigations using aqueous solutions containing zinc cations. The experimental results suggest that ionic species within the nanopores of porous silicon are more stable than those in a bulk solution due to the formation of ion pairs with enhanced stability as well as kinetic factors that increase the activation energy for precipitation.

Evolution and Reversible Polarity of Multilayering at the Ionic Liquid/Water Interface.

Highly correlated positioning of ions underlies Coulomb interactions between ions and electrified interfaces within dense ionic fluids such as biological cells and ionic liquids. Recent work has shown that highly correlated ionic systems behave differently than dilute electrolyte solutions, and interest is focused upon characterizing the electrical and structural properties of the dense electrical double layers (EDLs) formed at internal interfaces. It has been a challenge for experiments to characterize the progressive development of the EDL on the nanoscale as the interfacial electric potential is varied over a range of positive and negative values. Here we address this challenge by measuring X-ray reflectivity from the interface between an ionic liquid (IL) and a dilute aqueous electrolyte solution over a range of interfacial potentials from -450 to 350 mV. The growth of alternately charged cation-rich and anion-rich layers was observed along with a polarity reversal of the layers as the potential changed sign. These data show that the structural development of an ionic multilayer-like EDL with increasing potential is similar to that suggested by phenomenological theories and MD simulations, although our data also reveal that the excess charge beyond the first ionic layer decays more rapidly than predicted.

An electric double layer structure and differential capacitance at the electrode interface of tributylmethylammonium bis(trifluoromethanesulfonyl)amide studied using a molecular dynamics simulation.

A molecular dynamics simulation at the electrode interface of a quaternary ammonium ionic liquid, tributylmethylammonium bis(trifluoromethanesulfonyl)amide ([N1444+][TFSA-]), has been performed. Unlike the commonly used cations, such as 1-alkyl-3-methylimidazolium and 1,1-alkylmethylpyrrolidinium cations, N1444+ has multiple long-alkyl groups (three butyl groups). The behavior of ions at the electrode interface, especially these butyl groups, has been investigated. N1444+ at the first layer mainly has two types of orientations, lying and standing. The lying orientation is dominant at moderately negative potentials. However, the standing one becomes dominant at the more negative potentials. Due to this orientational change, the number of N1444+ increases at the first layer as the potential becomes negative even at the potentials where the anions are completely depleted there. The change in orientation results in the upward deviation of the differential capacitance from the theoretical prediction at the negative potentials. The results suggest that the orientational preference caused by the steric constraint between alkyl groups plays an important role in the behavior of the electric double layer of the ionic liquids.

Stratification of Colloidal Particles on a Surface: Study by a Colloidal Probe Atomic Force Microscopy Combined with a Transform Theory.

Colloidal probe atomic force microscopy (CP-AFM) can be used for measuring force curves between the colloidal probe and the substrate in a colloidal suspension. In the experiment, an oscillatory force curve reflecting the layer structure of the colloidal particles on the substrate is usually obtained. However, the force curve is not equivalent to the interfacial structure of the colloidal particles. In this paper, the force curve is transformed into the number density distribution of the colloidal particles as a function of the distance from the substrate surface using our newly developed transform theory. It is found by the transform theory that the interfacial stratification is enhanced by an increase in an absolute value of the surface potential of the colloidal particle, despite a simultaneous increase in a repulsive electrostatic interaction between the substrate and the colloidal particle. To elucidate the mechanism of the stratification, an integral equation theory is employed. It is found that crowding of the colloidal particles in the bulk due to the increase in the absolute value of the surface potential of the colloidal particle leads to pushing out some colloidal particles to the wall. The combined method of CP-AFM and the transform theory (the experimental-theoretical study of the interfacial stratification) is related to colloidal crystallization, glass transition, and aggregation on a surface. Thus, the combined method is important for developments of colloidal nanotechnologies.

Janus-Type Gold/Polythiophene Composites Formed via Redox Reaction at the Ionic Liquid|Water Interface.

Janus-type Au/polythiophene (PT) composites have been prepared by utilizing the liquid/liquid interface between water (W) and a hydrophobic ionic liquid (IL) as the redox reaction site. AuCl4- is reductively deposited, and terthiophene is oxidatively polymerized spacio-selectively at the IL|W interface, leading to the formation of the Au/PT composites. The composites are Janus-type Au-attached PT plates with two surface morphologies, flat surface and flowerlike surface at the W and IL sides of the plates at the IL|W interface, respectively. Not only surface morphologies but also attached Au structures are different at the two surfaces; Au microurchins on the flat surface and dendritic Au nanofibers on the flowerlike surface. Optical and scanning electron microscopic observations have revealed that nanofibers and microurchins are formed at the early and later stage of the reaction, respectively. Electrochemistry at the IL|W interface has illustrated that electron transfer across the IL|W interface during the formation of the Janus-type Au/PT composites is coupled with ion transfer of AuCl4- to compensate for the charge unbalance in the two liquid phases. AuCl4- transferred into IL is found to be the source of the dendritic Au nanofibers formed at the IL side of the PT plates.

A relationship between the force curve measured by atomic force microscopy in an ionic liquid and its density distribution on a substrate.

An ionic liquid forms a characteristic solvation structure on a substrate. For example, when the surface of the substrate is negatively or positively charged, cation and anion layers are alternately aligned on the surface. Such a solvation structure is closely related to slow diffusion, high electric capacity, and chemical reactions at the interface. To analyze the periodicity of the solvation structure, atomic force microscopy is often used. The measured force curve is generally oscillatory and its characteristic oscillation length corresponds not to the ionic diameter, but to the ion-pair diameter. However, the force curve is not the solvation structure. Hence, it is necessary to know the relationship between the force curve and the solvation structure. To find physical essence in the relationship, we have used statistical mechanics of a simple ionic liquid. We found that the basic relationship can be expressed by a simple equation and the reason why the oscillation length corresponds to the ion-pair diameter. Moreover, it is also found that Derjaguin approximation is applicable to the ionic liquid system.

Number Density Distribution of Small Particles around a Large Particle: Structural Analysis of a Colloidal Suspension.

Some colloidal suspensions contain two types of particles-small and large particles-to improve the lubricating ability, light absorptivity, and so forth. Structural and chemical analyses of such colloidal suspensions are often performed to understand their properties. In a structural analysis study, the observation of the number density distribution of small particles around a large particle (gLS) is difficult because these particles are randomly moving within the colloidal suspension by Brownian motion. We obtain gLS using the data from a line optical tweezer (LOT) that can measure the potential of mean force between two large colloidal particles (ΦLL). We propose a theory that transforms ΦLL into gLS. The transform theory is explained in detail and tested. We demonstrate for the first time that LOT can be used for the structural analysis of a colloidal suspension. LOT combined with the transform theory will facilitate structural analyses of the colloidal suspensions, which is important for both understanding colloidal properties and developing colloidal products.

Correction: Number density distribution of solvent molecules on a substrate: a transform theory for atomic force microscopy.

Correction for 'Number density distribution of solvent molecules on a substrate: a transform theory for atomic force microscopy' by Ken-ichi Amano et al., Phys. Chem. Chem. Phys., 2016, 18, 15534-15544.

Number density distribution of solvent molecules on a substrate: a transform theory for atomic force microscopy.

Atomic force microscopy (AFM) in liquids can measure a force curve between a probe and a buried substrate. The shape of the measured force curve is related to hydration structure on the substrate. However, until now, there has been no practical theory that can transform the force curve into the hydration structure, because treatment of the liquid confined between the probe and the substrate is a difficult problem. Here, we propose a robust and practical transform theory, which can generate the number density distribution of solvent molecules on a substrate from the force curve. As an example, we analyzed a force curve measured by using our high-resolution AFM with a newly fabricated ultrashort cantilever. It is demonstrated that the hydration structure on muscovite mica (001) surface can be reproduced from the force curve by using the transform theory. The transform theory will enhance AFM's ability and support structural analyses of solid/liquid interfaces. By using the transform theory, the effective diameter of a real probe apex is also obtained. This result will be important for designing a model probe of molecular scale simulations.

Molecular Dynamics Simulation of Atomic Force Microscopy at the Water-Muscovite Interface: Hydration Layer Structure and Force Analysis.

With the development of atomic force microscopy (AFM), it is now possible to detect the buried liquid-solid interfacial structure in three dimensions at the atomic scale. One of the model surfaces used for AFM is the muscovite surface because it is atomically flat after cleavage along the basal plane. Although it is considered that force profiles obtained by AFM reflect the interfacial structures (e.g., muscovite surface and water structure), the force profiles are not straightforward because of the lack of a quantitative relationship between the force and the interfacial structure. In the present study, molecular dynamics simulations were performed to investigate the relationship between the muscovite-water interfacial structure and the measured AFM force using a capped carbon nanotube (CNT) AFM tip. We provide divided force profiles, where the force contributions from each water layer at the interface are shown. They reveal that the first hydration layer is dominant in the total force from water even after destruction of the layer. Moreover, the lateral structure of the first hydration layer transcribes the muscovite surface structure. It resembles the experimentally resolved surface structure of muscovite in previous AFM studies. The local density profile of water between the tip and the surface provides further insight into the relationship between the water structure and the detected force structure. The detected force structure reflects the basic features of the atomic structure for the local hydration layers. However, details including the peak-peak distance in the force profile (force-distance curve) differ from those in the density profile (density-distance curve) because of disturbance by the tip.

Dynamics of the entropic insertion of a large sphere into a cylindrical vessel.

Insertion of a solute into a vessel comprising biopolymers is a fundamental function in a biological system. The entropy originating from the translational displacement of solvent particles plays an essential role in the insertion. Here we study the dynamics of entropic insertion of a large spherical solute into a cylindrical vessel. The solute and the vessel are immersed in small spheres forming the solvent. We develop a theoretical method formulated using the Fokker-Planck equation. The spatial distribution of solute-vessel entropic potential, which is calculated by the three-dimensional integral equation theory combined with rigid-body models, serves as input data. The key quantity analyzed is the density of the probability of finding the solute at any position at any time. It is found that the solute is inserted along the central axis of the vessel cavity and trapped at a position where the entropic potential takes a local minimum value. The solute keeps being trapped without touching the vessel inner surface. In a significantly long time τ, the solute transfers to the position in contact with the vessel bottom possessing the global potential minimum along the central axis. As the solute size increases, τ becomes remarkably longer. We also discuss the relevance of our result to the functional expression of a chaperonin/cochaperonin in the assistance of protein folding.

A relationship between three-dimensional surface hydration structures and force distribution measured by atomic force microscopy.

Hydration plays important roles in various solid-liquid interfacial phenomena. Very recently, three-dimensional scanning force microscopy (3D-SFM) has been proposed as a tool to visualise solvated surfaces and their hydration structures with lateral and vertical (sub) molecular resolution. However, the relationship between the 3D force map obtained and the equilibrium water density, ρ(r), distribution above the surface remains an open question. Here, we investigate this relationship at an interface of an inorganic mineral, fluorite, and water. The force maps measured in pure water are directly compared to force maps generated using the solvent tip approximation (STA) model and from explicit molecular dynamics simulations. The results show that the simulated STA force map describes the major features of the experimentally obtained force image. The agreement between the STA data and the experiment establishes the correspondence between the water density used as an input to the STA model and the experimental hydration structure and thus provides a tool to bridge the experimental force data and atomistic solvation structures. Further applications of this method should improve the accuracy and reliability of both interpretation of 3D-SFM force maps and atomistic simulations in a wide range of solid-liquid interfacial phenomena.

On the physics of multidrug efflux through a biomolecular complex.

Insertion and release of a solute into and from a vessel comprising biopolymers is a fundamental function in a biological system. A typical example is found in a multidrug efflux transporter. "Multidrug efflux" signifies that solutes such as drug molecules with diverse properties can be handled. In our view, the mechanism of the multidrug efflux is not chemically specific but rather has to be based on a physical factor. In earlier works, we showed that the spatial distribution of the solute-vessel potential of mean force (PMF) induced by the solvent plays imperative roles in the insertion∕release process. The PMF can be decomposed into the energetic and entropic components. The entropic component, which originates from the translational displacement of solvent molecules, is rather insensitive to the solute-solvent and vessel inner surface-solvent affinities. This feature is not shared with the energetic component. When the vessel inner surface is neither solvophobic nor solvophilic, the solvents within the vessel cavity and in the bulk offer almost the same environment to any solute with solvophobicity or solvophilicity, and the energetic component becomes much smaller than the entropic component (i.e., the latter predominates over the former). Our idea is that the multidrug efflux can be realized if the insertion/release process is accomplished by the entropic component exhibiting the insensitivity to the solute properties. However, we have recently argued that the entropic release of the solute is not feasible as long as the vessel geometry is fixed. Here we consider a model of TolC, a cylindrical vessel possessing an entrance at one end and an exit at the other end for the solute. The spatial distribution of the PMF is calculated by employing the three-dimensional integral equation theory with rigid-body models in which the constituents interact only through hard-body potentials. Since the behavior of these models is purely entropic in origin, our analysis is focused on the entropic component. We show that the entropically inserted solute can be released by a continuous variation of the vessel geometry which forms a time-dependent entropic force continuing to accelerate the solute motion to the exit. Solutes with a wide range of sizes are entropically released using the same vessel-geometry variation. The results obtained are fairly general and also applicable to the efflux pump protein AcrB and ATP-binding cassette transporter.

The relationship between local liquid density and force applied on a tip of atomic force microscope: a theoretical analysis for simple liquids.

The density of a liquid is not uniform when placed on a solid. The structured liquid pushes or pulls a probe employed in atomic force microscopy, as demonstrated in a number of experimental studies. In the present study, the relation between the force on a probe and the local density of a liquid is derived based on the statistical mechanics of simple liquids. When the probe is identical to a solvent molecule, the strength of the force is shown to be proportional to the vertical gradient of ln(ρDS) with the local liquid's density on a solid surface being ρDS. The intrinsic liquid's density on a solid is numerically calculated and compared with the density reconstructed from the force on a probe that is identical or not identical to the solvent molecule.

Effects of lipooligosaccharide inner core truncation on bile resistance and chick colonization by Campylobacter jejuni.

Campylobacter jejuni is the most common bacterium that causes diarrhea worldwide, and chickens are considered the main reservoir of this pathogen. This study investigated the effects of serial truncation of lipooligosaccharide (LOS), a major component of the outer membrane of C. jejuni, on its bile resistance and intestinal colonization ability in chickens. Genes encoding manno-heptose synthetases or glycosyltransferases were inactivated to generate isogenic mutants. Serial truncation of the LOS core oligosaccharide caused a stepwise increase in susceptibilities of two C. jejuni strains, NCTC 11168 and 81-176, to bile acids. Inactivation of hldE, hldD, or waaC caused severe truncation of the core oligosaccharide, which greatly increased the susceptibility to bile acids. Both wild-type strains grew normally in chicken intestinal extracts, whereas the mutants with severe oligosaccharide truncation were not detected 12 h after inoculation. These mutants attained viable bacterial counts in the bile acid-free extracts 24 h after inoculation. The wild-type strain 11-164 was present in the cecal contents at >10(7) CFU/g on 5 days after challenge infection and after this time period, whereas its hldD mutant was present at <10(3) CFU/g throughout the experimental period. Trans-complementation of the hldD mutant with the wild-type hldD allele completely restored the in vivo colonization level to that of the wild-type strain. Mutants with a shorter LOS had higher hydrophobicities. Thus, the length of the LOS core oligosaccharide affected the surface hydrophobicity and bile resistance of C. jejuni as well as its ability to colonize chicken intestines.

Implication of antigenic conversion of Helicobacter pylori lipopolysaccharides that involve interaction with surfactant protein D.

We propose two antigenic types of Helicobacter pylori lipopolysaccharides (LPS): highly antigenic epitope-carrying LPS (HA-LPS) and weakly antigenic epitope-carrying LPS (WA-LPS) based on human serum reactivity. Strains carrying WA-LPS are highly prevalent in isolates from gastric cancer patients. WA-LPS exhibits more potent biological activities compared to HA-LPS, namely, upregulation of Toll-like receptor 4 (TLR4) expression and induction of enhanced epithelial cell proliferation. The results of competitive binding assays using monosaccharides and methylglycosides, as well as binding assays using glycosidase-treated LPS, suggested that ß-linked N-acetyl-D-glucosamine and ß-linked D-galactose residues largely contributed to the highly antigenic epitope and the weakly antigenic epitope, respectively. WA-LPS exhibited greater binding activity to surfactant protein D (SP-D) in a Ca(2+)-dependent manner, and this interaction was inhibited by methyl-ß-D-galactoside. The biological activities of WA-LPS were markedly enhanced by the addition of SP-D. Lines of evidence suggested that removal of ß-N-acetyl-D-glucosamine residue, which comprises the highly antigenic epitope, results in exposure of the weakly antigenic epitope. The weakly antigenic epitope interacted preferentially with SP-D, and SP-D enhanced the biological activity of WA-LPS.

Comparison of the Serological Reactivity of Lipopolysaccharides from Japanese and Western Strains of Helicobacter pylori to Sera from H. pylori-Positive Humans.

We compared the serological reactivity of lipopolysaccharides (LPS) isolated from Japanese and Western strains of Helicobacter pylori against anti-Lewis antigen monoclonal antibodies and H. pylori-positive Japanese sera. The two LPS from Western strains (26695 and O:2) did not react with any sera from Japanese patients, while all LPS from Japanese strains and the Sydney strain reacted with these sera. We propose that LPS of all Japanese smooth strains share either one of two epitopes, which are termed highly antigenic and weakly antigenic epitopes, present in the O-polysaccharide portion, and these epitopes are independent the Lewis antigens. The present findings indicated that the two Western strains lacked the two epitopes, which are shared by all Japanese strains.