Nitrile-calixarene grafted magnetic graphene oxide for removal of arsenic from aqueous media: Isotherm, kinetic and thermodynamic studies.

A novel adsorbent was developed based on nitrile functionalized calix [4]arene grafted onto magnetic graphene oxide (N-Calix-MGO) for remediation of arsenic (III) ions from aqueous media. The nanocomposite was characterized using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The effective parameters on adsorption efficiency such as pH, adsorbent dosage, contact time, initial concentration, and temperature were studied. The adsorption process was provided with a high removal efficiency up to (90%) at pH 6 which followed by IUPAC Type II pattern. The mathematical models of kinetics and isotherm validated the experimental process. The adsorption kinetic is followed pseudo-first-order model with R2 > 0.9. The adsorption equilibrium was well fitted on the Freundlich model (R2 ∼ 0.96) as compared Langmuir model (R2 ∼ 0.75). Hence, the Freundlich model suggested a multilayer sorption pattern with a physisorption mechanism for arsenic (III) uptake ono developed nanocomposite with a sorption capacity of 67 mg/g for arsenic. The Gibbs free energy (ΔG° < -20 kJ/mol) showed As(III) uptake ono N-Calix-MGO nanocomposite was the physical adsorption mechanism.

Hall effect sensors using polarized electron cloud spin orientation control.

A silicon microring circuit embedded gold film with unique characteristics is proposed for Hall effect, current, and temperature sensing applications. The microring circuit is operated by the input polarized laser sources, in which the space-time distortion control can be employed. A gold film is embedded at the microring center. The whispering gallery mode (WGM) is generated and applied for plasmonic waves, from which the trapped electron cloud oscillation is formed. Through the input port, the input polarized light of 1.55 µm wavelength fed into the space-time control circuit. Spin-up |↑〉(|0〉) and spin-down |↓〉(|1〉) of polarized electrons result when the gold film is illuminated by the WGM. The electric current passing through the gold film generates a magnetic field (B), which is orthogonal to the electric field. Hall voltage is obtained at the output of the circuit, from which the microring space-time circuit can operate for Hall's effect, current, and temperature sensing device. The simulation results obtained have shown that when the input power of 100-500 mW is applied, the optimum Hall effect, current, and temperature sensitivities are 0.12 µVT-1 , 0.9 µVA-1 , and 6.0 × 10-2 µVK-1 , respectively. The Hall effects, current, and temperature sensors have an optimum response time of 1.9 fs.

Label-free detection of DNA by a dielectric modulated armchair-graphene nanoribbon FET based biosensor in a dual-nanogap setup.

A Double-Gate Armchair-Graphene Nanoribbon FET is proposed to realize a high-sensitive and small-size biosensor in order to detect DNA without high-cost and time-consuming labeling process. Two nanogap cavities open inside the top and bottom gate oxides by the method of sacrificed layer etching. When the DNA biomolecule is introduced to the nanogap cavity, the hybridization event which is actually the formation of a double-strand of DNA will occur thus electrically modulating the GNR channel leading to a change in the drain current. The important report of this research is about attained high sensitivity of the proposed biosensor for a vast spectrum of the DNA biological samples. It is worth noting that a DNA sequence by 23 nucleotides extracted from Neisseria gonorrhoeae can be detected as a special case. An extensive numerical approach has been applied in order to characterize the proposed biosensor. The suggested biosensor has been evaluated by solving Schrödinger equation )SE( with Non-Equilibrium Green Function (NEGF) method in the mode-space coupled into Poisson solver in a self-consistent manner assuming ballistic limit. Two different expressions of sensitivity in terms of the threshold voltage and current have been defined giving a good metric for the sensitivity analysis. The results revealed a relative sensitivity of 1 mV/nm2 by a filled area by the DNA about 120 nm2 showing the excellent superiority for the proposed biosensor as compared to other counterparts. The effective area of the proposed biosensor obtains 240 nm2 which is very small in comparison with other reports highlighting high capability of the biosensor in the detection. It has been shown that the proposed biosensor can be implemented in ultra-scaling domain resulting in considerable increase in the sensitivity promising a potent and reliable candidate for high-sensitive and small-size biosensors. Also, the technical issues on designing the suggested biosensor have been investigated to achieve a useful guideline in detection and identification of the target DNAs.

Sensitivity Comparison of Refractive Index Transducer Optical Fiber Based on Surface Plasmon Resonance Using Ag, Cu, and Bimetallic Ag-Cu Layer.

A single-mode optical fiber sensor uses surface plasmon resonance (SPR) with a bimetallic silver-copper (Ag-Cu) coating compared to a single layer of Ag and Cu itself. Bimetallic Ag-Cu sensors are constructed by simple fabrication on a side-polished optical fiber, followed by an electron beam evaporation of Ag and Cu films. For this investigation, the thickness of the single Ag layer was set to 30 nm and the single Cu layer was set to 30 nm; whereas for the bimetallic combined Ag-Cu layer the thickness of Ag was 7 nm and Cu 23 nm. The sensor performance was analyzed and compared experimentally and numerically using the COMSOL Multiphysics. A white light source was used with a broad optical bandwidth to provide a range of wavelengths to the optical fiber. The characteristics of the thin layers of Ag, Cu, and Ag-Cu as alcohol sensors were evaluated. We found that Cu was the most sensitive metallic layer compared to the Ag and the bimetallic Ag-Cu layers. For a 100% alcohol concentration, Cu showed a sensitivity of 425 nm/RIU followed by the bimetallic Ag-Cu layer with 108.33 nm/RIU, whereas the Ag layer was not detected. Interestingly, sensitivity reached saturation beyond the 20 nm thick layer of Ag. This shows that the Cu and the bimetallic Ag-Cu layers are suitable for an alcohol-based optical sensor.

An FBG magnetic sensor for oil flow monitoring in sandstone core.

Monitoring the oil movement using a non-contact optical fiber probe during enhanced oil recovery is a novel technique to increase the efficiency of the process by distinguishing the oil position in the reservoir. A partially unclad fiber Bragg grating (FBG) coated with Fe3O4 nanoparticles as a magnetic field sensor is experimentally demonstrated. A series of six FBGs reflecting different wavelengths are fixed on the surface of sandstone. Nanofluids containing magnetite nanoparticles and alkaline-surfactant-polymer are injected continuously in two separate steps into the sandstone, which is saturated with 20% oil and 80% brine. The chamber is equipped with a solenoid that acts as a magnetic field generator. The changes in the magnetic field strength depended on the FBG-solenoid distance and the density of localized injected nanoparticles near the FBGs leads to a shift of the reflected wavelength of each single FBG accordingly. The shift is caused by the interference of different propagating modes reflected from the core-cladding and cladding-magnetite layer interfaces. The intensity of the FBG spectra decreases by injecting the nanofluid and vice versa for surfactant injection. The sensor response time of ∼21 s confirms the high reliability and repeatability of the sensing scheme. Movement of oil along the sandstone alters the wavelength shift in the FBG spectra.

Introduction to Photonics: Principles and the Most Recent Applications of Microstructures.

Light has found applications in data transmission, such as optical fibers and waveguides and in optoelectronics. It consists of a series of electromagnetic waves, with particle behavior. Photonics involves the proper use of light as a tool for the benefit of humans. It is derived from the root word "photon", which connotes the tiniest entity of light analogous to an electron in electricity. Photonics have a broad range of scientific and technological applications that are practically limitless and include medical diagnostics, organic synthesis, communications, as well as fusion energy. This will enhance the quality of life in many areas such as communications and information technology, advanced manufacturing, defense, health, medicine, and energy. The signal transmission methods used in wireless photonic systems are digital baseband and RoF (Radio-over-Fiber) optical communication. Microwave photonics is considered to be one of the emerging research fields. The mid infrared (mid-IR) spectroscopy offers a principal means for biological structure analysis as well as nonintrusive measurements. There is a lower loss in the propagations involving waveguides. Waveguides have simple structures and are cost-efficient in comparison with optical fibers. These are important components due to their compactness, low profile, and many advantages over conventional metallic waveguides. Among the waveguides, optofluidic waveguides have been found to provide a very powerful foundation for building optofluidic sensors. These can be used to fabricate the biosensors based on fluorescence. In an optical fiber, the evanescent field excitation is employed to sense the environmental refractive index changes. Optical fibers as waveguides can be used as sensors to measure strain, temperature, pressure, displacements, vibrations, and other quantities by modifying a fiber. For some application areas, however, fiber-optic sensors are increasingly recognized as a technology with very interesting possibilities. In this review, we present the most common and recent applications of the optical fiber-based sensors. These kinds of sensors can be fabricated by a modification of the waveguide structures to enhance the evanescent field; therefore, direct interactions of the measurand with electromagnetic waves can be performed. In this research, the most recent applications of photonics components are studied and discussed.