Nanocurcumin-Based Sugar-Free Formulation: Development and Impact on Diabetes and Oxidative Stress Reduction.

The objective of this study is the development of innovative nanocurcumin-based formulations designed for the treatment and prevention of oxidative stress and diabetes. Nanocurcumin was obtained through a micronization process and subsequently encapsulated within biopolymers derived from corn starch and fenugreek mucilage, achieving encapsulation rates of 75% and 85%, respectively. Subsequently, the encapsulated nanocurcumin was utilized in the formulation of sugar-free syrups based on Stevia rebaudiana Bertoni. The stability of the resulting formulations was assessed by monitoring particle size distribution and zeta potential over a 25-day period. Dynamic light scattering (DLS) revealed a particle size of 119.9 nm for the fenugreek mucilage-based syrup (CURF) and 117 nm for the corn starch-based syrup (CURA), with polydispersity indices PDIs of 0.509 and 0.495, respectively. The dissolution rates of the encapsulated nanocurcumin were significantly enhanced, showing a 67% improvement in CURA and a 70% enhancement in CURF compared with crude curcumin (12.82%). Both formulations demonstrated excellent antioxidant activity, as evidenced by polyphenol quantification using the 2.2-diphenyl 1-pycrilhydrazyl (DPPH) assay. In the evaluation of antidiabetic activity conducted on Wistar rats, a substantial reduction in fasting blood sugar levels from 392 to 187 mg/mL was observed. The antioxidant properties of CURF in reducing oxidative stress were clearly demonstrated by a macroscopic observation of the rats' livers, including their color and appearance.

Molecular Amplification and Cell Culturing Efficiency for Enteroviruses' Detection in Cerebrospinal Fluids of Algerian Patients Suffering from Meningitis.

Enteroviruses (EVs) represent a major cause of viral meningitis, being responsible for nearly 1 billion infections each year worldwide. Several techniques were developed to obtain better diagnostic results of EV infections. Herein, we evaluated the efficiency of EV detection through isolation on both Rhabdomyosarcoma (RD) and Vero cell line cultures, conventional reverse transcription-polymerase chain reaction (RT-PCR) and real-time RT-PCR. Thus, 50 cerebrospinal fluid (CSF) samples belonging to patients suspected to have viral meningitis in northern Algeria were collected, anonymously numbered from 1 to 50 and subjected to the above-mentioned techniques for EV detection. Using real-time RT-PCR, 34 CSF samples were revealed to be positive for viral origin of meningitis (68%). Thirteen of them were positive when the conventional RT-PCR was used (26%), and only three samples gave positive results when the cell culture technique was used (6%). Surprisingly, two cell culture-positive CSF samples, namely, 31 and 39, were negative using RT-PCR directly on the original samples. However, they turned to be positive when amplification was carried out on their corresponding cell culture supernatant. The cell-cultured viral isolates were then identified by sequencing their viral genome's VP1 regions. All of them were revealed to belong to the echovirus 27 strain. This investigation demonstrates that RT-PCR techniques are often more sensitive, accurate and much faster, providing reliable results within a clinically acceptable timeframe. However, viral isolation on cell cultures remains crucial to obtain enough viral load for serological tests or even to avoid the rare, but existing, false negative PCR.

Indigenous microalgae strains characterization for a sustainable biodiesel production.

Microalgae have been widely recognized as a promising feedstock for sustainable biofuels production to tackle global warming and pollution issues related to fossil fuels uses. This study identified and analyzed indigenous microalgae strains for biodiesel production, specifically Chlorella vulgaris and Coelastrella thermophila var. globulina, from two distinct locations in Algeria. Molecular identification confirmed their identity, and the microalgae exhibited notable growth characteristics. Local Chlorella vulgaris and Coelastrella thermophila var. globulina showed good growth and high biomass yield, compared to Chlorella vulgaris CCAP211/11B reaching a weight of 1.48 g L-1 , 1.95 g L-1 , and 2.10 g L-1 , respectively. Lipids content of local Chlorella vulgaris, Coelastrella thermophila var. globulina, and Chlorella vulgaris CCAP211/11B, were found to be 31.39 ± 3.3%, 17 ± 2.26%, and 19 ± 0.64%, respectively. Chlorella vulgaris stood out as a candidate for biodiesel production due to its equilibrium between SFA and PUFA (43.24% and 45.27%). FAs are predominated by SFA and MUFA for Coelastrella thermophila var. globulina with value of 81.49% (SFA+MUFA). Predicted biodiesel qualities comply with ASTM6751 and EN14214 standards. Studied microalgae have therefore a promising potential for biodiesel production. However, optimising cultivation conditions is necessary to enhance biomass and lipids yield at a large scale.

Unveiling the Impact of Thiophanate-Methyl on Arthrospira platensis: Growth, Photosynthetic Pigments, Biomolecules, and Detoxification Enzyme Activities.

BACKGROUND: The intensive and injudicious use of pesticides in agriculture has emerged as a major concern due to its detrimental impact on aquatic ecosystems. However, the specific impact of broad-spectrum fungicides, such as Thiophanate-methyl (TM), on cyanobacteria remains a subject of ongoing research and debate. METHODS: In order to fill this knowledge gap, The present study aimed to comprehensively investigate the toxicological effects of TM (10-30 µg/L) on the growth, photosynthetic pigments, oxidative stress, and biochemical composition of the non-nitrogen-fixing cyanobacterium Arthrospira platensis. RESULTS: Our findings unequivocally demonstrated that TM exposure significantly inhibited the growth of A. platensis. Moreover, the decrease in chlorophyll content indicated a pronounced negative impact on the photosynthetic system of A. platensis caused by TM exposure. Notably, TM induced oxidative stress in A. platensis, as substantiated by a significant increase in lipid peroxidation (MDA) within the culture. Furthermore, the intracellular generation of hydrogen peroxide (H2O2) exhibited a positive correlation with higher TM dosages, while the levels of vital antioxidant enzymes, such as catalase (CAT) and ascorbate peroxidase (APX), exhibited a discernible decrease. This suggests that TM compromises the antioxidant defense mechanisms of A. platensis. Additionally, TM was found to enhance the activity of a plethora of enzymes involved in the detoxification of pesticides, including peroxidase (POD) and glutathione-S-transferase (GST), thereby indicating a robust detoxification response by A. platensis. Interestingly, exposure to TM resulted in a general suppression of biocomponent production, such as total proteins and total carbohydrates, which exhibited a diminishing trend with increasing TM concentration. Conversely, the lipid content witnessed a significant increase, possibly as an adaptive response to TM-induced stress. CONCLUSIONS: These findings contribute to a deeper understanding of the ecological implications of pesticide usage and emphasize the urgent need for the adoption of sustainable and environmentally-friendly agricultural practices to safeguard aquatic ecosystems.

The Relationship between Air Pollution and Brain Cancer: A Systematic Review and Meta-Analysis.

Background: There is very little epidemiological evidence on the effects of ambient air pollution on brain tumor risk. The purpose of this study was to determine the relationship between exposure to air pollution and the incidence of brain tumors. Methods: A comprehensive literature search in five international databases, including PubMed/Medline, ProQuest, Scopus, Embase, and ISI/WOS on April 15, 2019, was conducted. The methodology of the present study was based on the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) statement. The Newcastle-Ottawa Quality Assessment Form was used to evaluate the quality of the selected papers. Results: Five studies that measured adult brain tumors as well as their long-term exposure to at least one of the pollutants criteria for air pollution, PM2.5 absorbance, and proximity to traffic (Trafnear) were reviewed. The results showed that the pooled relative risk (RR) for incidence of brain tumor and long term exposure to Trafnear, PM2.5, PM2.5 absorbance, O3 and NOx were RR = 1.07, (95% CI 0.99-1.16), P = 0.079, for Trafnear; RR = 0.90, (95% CI 0.80-1.00), P = 0.064 for PM2.5; RR = 1.63, (95% CI 1.04-2.55), P = 0.031 for PM2.5 absorbance; RR = 1.3, (95% CI 1.03-1.6), P = 0.023 for O3; and RR = 1.16, (95% CI 0.93-1.45), P = 0.173 for NOx. Exposure to other air pollutants had no statistically significant association with brain tumor incidence. Conclusion: The results showed that exposure to air pollutants, such as O3 and PM2.5 absorbance, had the highest correlation with brain tumor incidence. They also showed an absence of correlation between exposure to certain pollutants (SO2, CO, NO2, PM10, PM2.5) and brain tumor incidence.

Experimental Analysis and Neural Network Modeling of the Rheological Behavior of Xanthan Gum and Its Derivatives.

The main objective of this study was to create a mathematical tool that could be used with experimental data to predict the rheological flow behavior of functionalized xanthan gum according to the types of chemical groups grafted onto its backbone. Different rheological and physicochemical analyses were applied to assess six derivatives synthesized via the etherification of xanthan gum by hydrophobic benzylation with benzyl chloride and carboxymethylation with monochloroacetic acid at three (regent/polymer) ratios R equal to 2.4 and 6. Results from the FTIR study verified that xanthan gum had been modified. The degree of substitution (DS) values varying between 0.2 and 2.9 for carboxymethylxanthan gum derivatives were found to be higher than that of hydrophobically modified benzyl xanthan gum for which the DS ranged from 0.5 to 1. The molecular weights of all the derivatives were found to be less than that of xanthan gum for the two types of derivatives, decreasing further as the degree of substitution (DS) increased. However, the benzyl xanthan gum derivatives presented higher molecular weights varying between 1,373,146 (g/mol) and 1,262,227 (g/mol) than carboxymethylxanthan gum derivatives (1,326,722-1,015,544) (g/mol). A shear-thinning behavior was observed in the derivatives, and the derivatives' viscosity was found to decrease with increasing DS. The second objective of this research was to create an ANN model to predict one of the rheological properties (the apparent viscosity). The significance of the ANN model (R2 = 0.99998 and MSE = 5.95 × 10-3) was validated by comparing experimental results with the predicted ones. The results showed that the model was an efficient tool for predicting rheological flow behavior.

Formulation and Evaluation of Xanthan Gum Microspheres for the Sustained Release of Metformin Hydrochloride.

This work aimed to formulate xanthan gum microspheres for the encapsulation of metformin hydrochloride, according to the process of ionotropic gelation. The obtained microparticles, based on various fractions of xanthan gum (0.5-1.25), were subjected to different physico-chemical tests and a drug release study. Microspheres with an average size varying between 110.96 µm and 208.27 µm were obtained. Encapsulation efficiency reached 93.11% at a 1.25% biopolymer concentration. The swelling study showed a swelling rate reaching 29.8% in the gastric medium (pH 1.2) and 360% in the intestinal medium (pH 6.8). The drug release studies showed complete metformin hydrochloride release from the beads, especially those prepared from xanthan gum at the concentration of 1.25%, in intestinal medium at 90.00% after 6 h. However, limited and insignificant drug release was observed within the gastric medium (32.50%). The dissolution profiles showed sustained release kinetics.

Removal of Iodine-Containing X-ray Contrast Media from Environment: The Challenge of a Total Mineralization.

Iodinated X-ray contrast media (ICM) as emerging micropollutants have attracted considerable attention in recent years due to their high detected concentration in water systems. It results in environmental issues partly due to the formation of toxic by-products during the disinfection process in water treatment. Consequently, various approaches have been investigated by researchers in order to achieve ICM total mineralization. This review discusses the different methods that have been used to degrade them, with special attention to the mineralization yield and to the nature of formed by-products. The problem of pollution by ICM is discussed in the first part dedicated to the presence of ICM in the environment and its consequences. In the second part, the processes for ICM treatment including biological treatment, advanced oxidation/reductive processes, and coupled processes are reviewed in detail. The main results and mechanisms involved in each approach are described, and by-products identified during the different treatments are listed. Moreover, based on their efficiency and their cost-effectiveness, the prospects and process developments of ICM treatment are discussed.

Aleppo pine seeds (Pinus halepensis Mill.) as a promising novel green coagulant for the removal of Congo red dye: Optimization via machine learning algorithm.

Consideration is now being given to the use of metal coagulants to remove turbidity from drinking water and wastewater. Concerns about the long-term impact of non-biodegradable sludge on human health and the potential contamination of aquatic systems are gaining popularity. Recently, alternative biocoagulants have been suggested to address these concerns. In this study, using a 1 M sodium chloride (NaCl) solution, the active coagulating agent was extracted from Pinus halepensis Mill. Seed, and used for the first time to remove Congo red dye, the influence of numerous factors on dye removal was evaluated in order to make comparisons with conventional coagulants. The application of biocoagulant was shown to be very successful, with coagulant dosages ranging from 3 to 12 mL L-1 achieving up to 80% dye removal and yielding 28 mL L-1 of sludge. It was also found that biocoagulant is extremely pH sensitive with an optimum operating pH of 3. Ferric chloride, on the other hand, achieved similar removal rate with higher sludge production (46 mL L-1) under the same conditions. A Fourier Transform Infrared Spectroscopy and proximate composition analysis were undertaken to determine qualitatively the potential active coagulant ingredient in the seeds and suggested the involvement of proteins in the coagulation-flocculation mechanism. The evaluation criteria of the Support vector machine_Gray wolf optimizer model in terms of statistical coefficients and errors reveals quite interesting results and demonstrates the performance of the model, with statistical coefficients close to 1 (R = 0.9998, R2 = 0.9995 and R2 adj = 0.9995) and minimal statistical errors (RMSE = 0.5813, MSE = 0.3379, EPM = 0 0.9808, ESP = 0.9677 and MAE = 0.2382). The study findings demonstrate that Pinus halepensis Mill. Seed extract might be a novel, environmentally friendly, and easily available coagulant for water and wastewater treatment.

Heterogeneous degradation of amoxicillin in the presence of synthesized alginate-Fe beads catalyst by the electro-Fenton process using a graphite cathode recovered from used batteries.

Iron alginate beads (Fe-Alg) were prepared, characterized and implemented for the degradation of amoxicillin (AMX) by the heterogeneous electro-Fenton process using a graphite cathode recovered from used batteries. Scanning electron microscopy (SEM) showed that (Fe-Alg) beads have a spherical shape and the results of energy dispersive spectrometric (EDS) revealed the presence of iron in (Fe-Alg). Optimization of the operating parameters showed that a complete degradation of AMX was achieved within 90 min of heterogeneous electro-Fenton treatment by operating under these conditions: initial AMX concentration: 0.0136 mM, I = 600 mA, [Na2SO4] = 50 mM, pH = 3, T = 25 °C, ω = 360 rpm. The corresponding chemical oxygen demand (COD) abatement was 50%. Increasing the contact time increased the COD abatement to 85.71%, after 150 min of heterogeneous electro-Fenton treatment. The results of the kinetic study by using nonlinear methods demonstrated that the reaction of AMX degradation obeyed to a pseudo-second-order kinetic. Iron content of 4.63% w/w was determined by the acid digestion method. After 5 cycles of use, the Alg-Fe catalyst depletion was only 8%. Biodegradability was remarkably improved after electro-Fenton pretreatment, since it increased from 0.07 initially to 0.36. The heterogeneous electro-Fenton process had efficiently eliminated AMX and it increased the biodegradability of the treated solution.

Interfacial coupling effects on adsorptive and photocatalytic performances for photoresponsive graphene-wrapped SrTiO3@Ag under UV-visible light: experimental and DFT approach.

Understanding the graphene/semiconductor/metal interactions is crucial to design innovative photocatalytic materials with efficient photocatalytic activity for environmental cleanup applications. SrTiO3 on reduced graphene oxide (rGO) with various graphene contents was successfully synthesized in this study utilizing a simple hydrothermal method, followed by decorating the surface with Ag particles by using the photodeposition process. Under UV-visible light irradiation, the resulting composites were tested for their improved photocatalytic activity to decompose methylene blue (MB). The prepared photocatalysts were characterized by XRD, SEM, EDX, DLS, FT-IR, Raman spectroscopy, and DRS. First-principle density functional theory calculations (DFT) were also carried out by using the generalized gradient approximation (GGA) and PBE functional with the addition of on-site Coulomb correction (GGA + U). The obtained SrTiO3/rGO@Ag composites showed great improvement in the photocatalytic performances over pristine SrTiO3. For the degradation reaction of MB, SrTiO3/rGO20%@Ag4% composites yielded the best photocatalytic activity with efficacy reach 94%, which was also shown that it could be recycled up to four times with nearly unchanged photocatalytic activity.

Peroxidase enzymes as green catalysts for bioremediation and biotechnological applications: A review.

The fast-growing consumer demand drives industrial process intensification, which subsequently creates a significant amount of waste. These products are discharged into the environment and can affect the quality of air, degrade water streams, and alter soil characteristics. Waste materials may contain polluting agents that are especially harmful to human health and the ecosystem, such as the synthetic dyes, phenolic agents, polycyclic aromatic hydrocarbons, volatile organic compounds, polychlorinated biphenyls, pesticides and drug substances. Peroxidases are a class oxidoreductases capable of performing a wide variety of oxidation reactions, ranging from reactions driven by radical mechanisms, to oxygen insertion into CH bonds, and two-electron substrate oxidation. This versatility in the mode of action presents peroxidases as an interesting alternative in cleaning the environment. Herein, an effort has been made to describe mechanisms governing biochemical process of peroxidase enzymes while referring to H2O2/substrate stoichiometry and metabolite products. Plant peroxidases including horseradish peroxidase (HRP), soybean peroxidase (SBP), turnip and bitter gourd peroxidases have revealed notable biocatalytic potentialities in the degradation of toxic products. On the other hand, an introduction on the role played by ligninolytic enzymes such as manganese peroxidase (MnP) and lignin peroxidase (LiP) in the valorization of lignocellulosic materials is addressed. Moreover, sensitivity and selectivity of peroxidase-based biosensors found use in the quantitation of constituents and the development of diagnostic kits. The general merits of peroxidases and some key prospective applications have been outlined as concluding remarks.

Effect of light intensity and wavelength on nitrogen and phosphate removal from municipal wastewater by microalgae under semi-batch cultivation.

Domestic, agricultural and industrial water activities lead to organic and inorganic pollution of the environment. Biotreatment of municipal wastewater with the potential production of biomass is a valuable feature of microalgae. In this study we evaluated the effects of wavelength and light intensity on phosphate and ammonium removal on the one hand, and biomass and protein production on the other hand by Spirulina platensis in municipal wastewater treatment under semi batch cultivation. S. platensis was inoculated at 40% in artificial wastewater open pond system. Red, blue and purple light with 3800, 4800 and 5800 lux light intensity under 12 h light and 12 h darkness were investigated. Cultivation was conducted in semi-batch conditions; after four days cultivation, one third of the culture was replaced with fresh medium. The highest biomass and protein concentrations were observed under blue light at 5800 lux light intensity, 5.45 and 3 g/l respectively cumulatively; while the highest amount of phosphate and ammonium removal were about 145 and 218 mg/l under purple light at 5800 lux intensity, respectively. The amounts of biomass and protein produced, as well as phosphate and ammonium removed, are therefore impacted by wavelength, light intensity, results show that light intensity and wavelength can be customized to reach on the one hand the highest biomass and protein production, and on the other hand to maximize the removal of phosphorous and ammonium.

Review: Clay-Modified Electrodes in Heterogeneous Electro-Fenton Process for Degradation of Organic Compounds: The Potential of Structural Fe(III) as Catalytic Sites.

Advanced oxidation processes are considered as a promising technology for the removal of persistent organic pollutants from industrial wastewaters. In particular, the heterogeneous electro-Fenton (HEF) process has several advantages such as allowing the working pH to be circumneutral or alkaline, recovering and reusing the catalyst and avoiding the release of iron in the environment as a secondary pollutant. Among different iron-containing catalysts, studies using clay-modified electrodes in HEF process are the focus in this review. Fe(III)/Fe(II) within the lattice of clay minerals can possibly serve as catalytic sites in HEF process. The description of the preparation and application of clay-modified electrodes in the degradation of model pollutants in HEF process is detailed in the review. The absence of mediators responsible for transferring electrons to structural Fe(III) and regenerating catalytic Fe(II) was considered as a milestone in the field. A comprehensive review of studies investigating the use of electron transfer mediators as well as the mechanism behind electron transfer from and to the clay mineral structure was assembled in order to uncover other milestones to be addressed in this study area.

A novel system coupling an electro-Fenton process and an advanced biological process to remove a pharmaceutical compound, metronidazole.

The objective of this study was to improve the mineralization of metronidazole, a recalcitrant antibiotic by the development of a new combined process coupling electro-Fenton and a biological process. For biotreatment, various strategies were considered bioaugmentation, bioacclimatation and biostimulation alone or combined. So, the novelty of this strategy is to combine advanced oxidation process with advanced biological process. The conventional biotreatment with activated sludge after 120 h of culture, led to 58.1% mineralization, whereas the pure isolated strains, from activated sludge culture in the presence of metronidazole by-products, identified as Pseudomonas putida (strain A) and Achromobacter sp. (strain B), led to 37.2% and 40.1% respectively. After original acclimation of the isolated strains to electrolysis by-products, the mineralization levels reached 75.6% and 72.9% for strains A and B respectively after 120 h of culture. The results showed that the mineralization of metronidazole by-products was the most important in the case of the combination of autochthonous bioaugmentation and biostimulation, with 96.1% after 120 h of treatment. By coupling the two processes, the global treatment reached therefore a mineralization yield of 97% with a reduction in processing time of 16 days compared to previous conventional biological treatment.

A New Approach to Produce Succinic Acid Through a Co-Culture System.

Microorganisms can produce a wide range of bio-based chemicals that can be used in various industrial applications as molecules of interest. In the present work, an analysis of the power production by pure culture, co-culture, and sequential culture was performed. In this study, both the mono-culture and the co-culture strategies of Actinobacillus succinogenes with Saccharomyces cerevisiae as carbon sources to produce succinic acid using glucose and fructose were examined. The cultures were performed in batch mode and a great attention was paid to the co-culture system to improve the biosynthetic pathway between A. succinogenes and S. cerevisiae by combining these two strains in a single fermentation process. Under microaerobic and anaerobic conditions, the process was characterized in terms of sugars concentration, cell density, metabolites, yield (mol-C products/ mol-C sugars), the temperature conditions for productivity, and pH. The results showed that the process could consume glucose and fructose and could adapt to different concentrations of the two sugars more quickly than by a single organism and the best results were obtained in a sequential co-culture recording 0.27 mol L-1 of succinic acid concentration and a volumetric productivity of 0.3 g L-1 h-1. Under the investigated operating conditions, the combination of these two strains in a single reactor produced a significant amount of succinic acid (0.70 mol-C SA/mol-C substrates). A simultaneous and sequential co-culture strategy can be a powerful new approach in the field of bio-based chemical production.

Biosorption of cationic and anionic dyes using the biomass of Aspergillus parasiticus CBS 100926T.

Aspergillus parasiticus (A. parasiticus) CBS 100926T was used as a biosorbent for the removal of Methylene Blue (MB), Congo Red (CR), Sudan Black (SB), Malachite Green Oxalate (MGO), Basic Fuchsin (BF) and Phenol Red (PR) from aqueous solutions. The batch biosorption studies were carried out as a function of dye concentration and contact time. The biosorption process followed the pseudo-first-order and the pseudo-second-order kinetic models and the Freundlich and Langmuir isotherm models. The resulting biosorbent was characterized by Scanning Electron Microscopy (SEM), X-Ray Diffractometer and Fourier Transformer Infrared Spectroscopy (FTIR) techniques. The results of the present investigation suggest that A. parasiticus can be used as an environmentally benign and low cost biomaterial for the removal of basic and acid dyes from aqueous solution.

Effect of mixed culture of yeast and microalgae on acetyl-CoA carboxylase and Glycerol-3-phosphate acyltransferase expression.

In recent years, some studies have reported that co-culturing green algae and yeast improve lipid and biomass concentration. In this study, a co-culture of the oleaginous yeast Rhodotorula glutinis and the microalgae Chlorella vulgaris was consequently conducted with inoculation of microalga and yeast in growth and stationary phases, respectively. For the first time, the expression of two pivotal enzymes in fatty acids synthetic pathway, acetyl-CoA carboxylase and Glycerol-3-phosphate acyltransferase, was evaluated. To evaluate the synergistic impacts of the mixed culture on the enzymes expression, several co-culture models were designed, including the use of different ratio of microalgae to yeast or the use of residual cell-free medium of yeast; a positive impact on enzymes overexpression was shown in the case of the co-culture of the two microorganisms, and when the remaining cell-free medium of yeast was added to the microalgal culture. The results of in vitro co-culture demonstrated increased 6- and 5-fold of nervonic acid (C24:1) and behenic acid (C22:0) concentrations, respectively, in 2:1 microalgae to yeast co-culture as compared to the monoculture batches. Addition of yeast residual cell-free medium in the 2:1 ratio to the microalgal culture enhanced 9 and 6 times nervonic acid (C24:1) and behenic acid (C22:0) amounts, respectively.

Bio-based and cost effective method for phenolic compounds removal using cross-linked enzyme aggregates.

This work aimed at presenting a green method using a new source of peroxidase isolated from Raphanus sativus var. niger (RSVNP) in immobilized form, for the treatment of wastewater. To ensure stability and enzymatic activity in the biodegradation process, RSVNP was immobilized as a cross-linked enzyme aggregate (CLEAs). With more than 29% of recovered activity and 85% aggregation yield, acetone was selected as the best precipitating agent. The formed protein aggregates required 2% (v/v) of glutaraldehyde (GA) concentration and a ratio of 9:1 (v/v) enzyme (E) amount to cross-linker (E/GA). Compared to the free enzyme, RSVNP-CLEAs were found more chemically and thermally stable and exhibited good storage stability for more than 8 weeks. In addition, RSVNP-CLEAs were evaluated for their ability to remove phenol and p-cresol from aqueous solution by varying several operating conditions. A maximal yield (98%) of p-cresol conversion was recorded after 40 min; while 92% of phenol was degraded after 1 h duration time. The reusability of RSVNP-CLEAs was tested, displaying 71% degradation of phenol in the third batch carried out and more than 54% was achieved for p-cresol after four successive reuses in the presence of hydrogen peroxide at 2 mM concentration.

Artificial neural network modeling of cefixime photodegradation by synthesized CoBi2O4 nanoparticles.

CoBi2O4 (CBO) nanoparticles were synthesized by sol-gel method using polyvinylpyrrolidone (PVP) as a complexing reagent. For a single phase with the spinel structure, the formed gel was dried and calcined at four temperatures stages. Various methods were used to identify and characterize the obtained spinel, such as X-ray diffraction (XRD), scanning electron micrograph (SEM-EDX), transmission electron microscope (TEM), Fourier transform infrared (FT-IR), X-ray fluorescence (XRF), Raman, and UV-Vis spectroscopies. The photocatalytic activity of CBO was examined for the degradation of a pharmaceutical product cefixime (CFX). Furthermore, for the prediction of the CFX degradation rate, an artificial neural network model was used. The network was trained using the experimental data obtained at different pH with different CBO doses and initial CFX concentrations. To optimize the network, various algorithms and transfer functions for the hidden layer were tested. By calculating the mean square error (MSE), 13 neurons were found to be the optimal number of neurons and produced the highest coefficient of correlation R2 of 99.6%. The relative significance of the input variables was calculated, and the most impacting input was proved to be the initial CFX concentration. The effects of some scavenging agents were also studied. The results confirmed the dominant role of hydroxyl radical OH• in the degradation process. With the novel CoBi2O4/ZnO hetero-system, the photocatalytic performance has been enhanced, giving an 80% degradation yield of CFX (10 mg/L) at neutral pH in only 3 h.