RESUMEN
Single-crystal lithium-nickel-manganese-cobalt-oxide (SC-NMC) is attracting increasing attention due to its excellent structural stability. However, its practical production faces challenges associated with complex precursor preparation processes and severe lithium-nickel cation mixing at high temperatures, which restricts its widespread application. Here, a molten-salt-assisted method is proposed using low-melting-point carbonates. This method obviates the necessity for precursor processes and simplified the synthetic procedure for SC-NMC down to a single isothermal sintering step. Multiple characterizations indicate that the acquired SC-LiNi0.6Mn0.2Co0.2O2 (SC-622) exhibits favorable structural capability against intra-granular fracture and suppressive Li+/Ni2+ cation mixing. Consequently, the SC-622 exhibits superior electrochemical performance with a high initial specific capacity (174 mAh g-1 at 0.1 C, 3.0-4.3 V) and excellent capacity retention (87.5% after 300 cycles at 1C). Moreover, this molten-salt-assisted method exhibits its effectiveness in directly regenerating SC-622 from spent NMC materials. The recovered material delivered a capacity of 125.4 mAh g-1 and retained 99.4% of the initial capacity after 250 cycles at 1 C. This work highlights the importance of understanding the process-structure-property relationships and can broadly guide the synthesis of other SC Ni-rich cathode materials.
RESUMEN
The transformation of solid wastes from industrial production into effective adsorbents could significantly contribute to wastewater treatment. In this study, after acidizing and burning soft scale (SS) from coal gasification system, two magnetic adsorbents (mag-ASS and mag-BASS) were prepared via the combination of magnetite with ultrasonic, respectively. The treatment effects of mag-ASS and mag-BASS were then investigated for simulated wastewater containing macromolecular organic matter [i.e., methylene blue (MB)] and Ca2+. The results indicated that the pseudo second order kinetic, Elovich, Freundlich, Langmuir and Temkin model could well describe the adsorption behavior of MB and Ca2+ onto mag-ASS and mag-BASS. The maximum adsorption capacities of mag-ASS for MB and mag-BASS for Ca2+ were 600.53 mg/g and 102.54 mg/g, respectively. Surprisingly, the adsorption abilities of mag-ASS for MB and mag-BASS for Ca2+ show significantly higher than the others. The adsorption mechanisms of MB mainly included electrostatic interaction, π-π conjugate interaction and cation exchange, while those of Ca2+ were mainly electrostatic interaction and cation exchange. The diffusion of MB and Ca2+ onto the magnetic adsorbents might be controlled by the combined effects of intraparticle and liquid film diffusion. There was no significant reduction in adsorption capacity after 8 cycles of adsorption and desorption, indicating that SS-based magnetic adsorbents had good recyclability and stability. Moreover, the removal efficiency of mag-BASS for total hardness and total organic carbon in real coal gasification gray water (CGGW) was 82.60 and 64.10%, respectively. The treatment of CGGW and the resource of wastes would significantly promote the reasonable disposal of coal gasification scales.
Asunto(s)
Calcio , Carbón Mineral , Azul de Metileno , Azul de Metileno/química , Adsorción , Calcio/química , Aguas Residuales/química , Cinética , Contaminantes Químicos del Agua/química , Purificación del Agua/métodosRESUMEN
To prevent the scale formation in the equipments and pipelines after pre-treated coal gasification gray water (CGGW) entering the reuse system and reduce the influence of various pollutants in the effluent on subsequent biochemical treatment, this study presented a coupled use of pulse electrocoagulation (PEC) and chemical precipitation (CP) coupling method for the pretreatment of coal gasification gray water (CGGW). In addition, the operation parameters of PEC and the reaction conditions of PEC-CP were optimized based on iron plate as electrode and total hardness, turbidity and sludge yield as assessment indicators. Due to the formation of multi-hydroxyl iron by several minutes of pulse current, and the addition of pH regulator and coagulant aid, the efficient removal of various ions, hardness and turbidity was significantly reduced via various mechanism such as redox, precipitation, adsorption and coagulation reaction. The result indicated that under the optimal operation conditions, the total hardness, turbidity, and Fen+ of PEC-CP effluents were 275.0 mg/L, 3.0 NTU and 5.6 mg/L, respectively and sludge amount was 0.88 kg/m3. The removal rates of Si, B, Mn, Ba, COD, NPOC and NH4+-N by PEC-CP reached 80.0%, 75.4%, 97.0%, 99.8%, 35.0%, 33.6% and 23.8%, respectively. The present results suggested that the CGGW pretreatment effluents could be not only reused directly, but also greatly alleviate the scaling problem of water pipeline and coal gasification production facilities.
Asunto(s)
Contaminantes Ambientales , Contaminantes Químicos del Agua , Carbón Mineral , Aguas Residuales , Aguas del Alcantarillado , Agua , Precipitación Química , Electrocoagulación , Hierro , Contaminantes Químicos del Agua/análisis , Eliminación de Residuos Líquidos/métodosRESUMEN
This study comprehensively investigated the potential roles of soil mineralogy identified by the automated mineral liberation analysers (MLA) in the prediction of geochemical behavior of toxic metals in the smelter polluted soils. The results from modal mineralogy revealed that the non-reactive silicate phases such as quartz (42.05%) and biotite (40.43%) were the major mineralogical phases. The element deportment showed that fayalite, lead oxide, apatite, galena and wollastonite were identified as the dominant As, Cd, Pb and Zn bearing minerals. Furthermore, MLA analysis also confirmed that Pb was most concentrated in the smaller particles of lead oxide, which significantly enhanced Pb release in reaction with the chemical extractant during chemical kinetic tests. The results from pH-dependent leaching tests indicated that the leaching concentrations of As, Pb and Zn increased at low and high pH values, but were lowest at the neutral pH range. In addition, the results from the kinetic study demonstrated that the second order model provided the best description for the release patterns of the main metal contaminants in the bioavailability and bioaccessibility tests. The integrated geochemical analysis demonstrated that among these studied elements, As showed a typical geochemical pattern, which was predominantly controlled by 90.09% of fayalite. The above study results would have significant implications for soil remediation and risk management of smelter contaminated sites.