RESUMEN
The development of integrated analytical devices is crucial for advancing next-generation point-of-care platforms. Herein, we describe a facile synthesis of a strongly catalytic and durable Nitrogen-doped graphene oxide decorated platinum cobalt (NGO-PtCo) nanocomposite that is conjugated with target-specific DNA aptamer (i-e. MUC1) and grown on carbon fiber. Benefitting from the combined features of the high electrochemical surface area of N-doped GO, high capacitance and stabilization by Co, and high kinetic performance by Pt, a robust, multifunctional, and flexible nanotransducer surface was created. The designed platform was applied for the specific detection of a blood-based oncomarker, CA15-3. The electrochemical characterization proved that nanosurface provides a highly conductive and proficient immobilization support with a strong bio-affinity towards MUC1 aptamer. The specific interaction between CA15-3 and the aptamer alters the surface properties of the aptasensor and the electroactive signal probe generated a remarkable increase in signal intensity. The sensor exhibited a wide dynamic range of 5.0 x 10-2 -200 U mL-1, a low limit of detection (LOD) of 4.1 x 10-2 U mL-1, and good reproducibility. The analysis of spiked serum samples revealed outstanding recoveries of up to 100.03%, by the proposed aptasensor. The aptasensor design opens new revelations in the reliable detection of tumor biomarkers for timely cancer diagnosis.
RESUMEN
Reactive oxygen species (ROS) including the superoxide anion (O2â¢-) are typically studied in cell cultures using fluorescent dyes, which provide only discrete single-point measurements. These methods lack the capabilities for assessing O2â¢- kinetics and release in a quantitative manner over long monitoring times. Herein, we present the fabrication and application of an electrochemical biosensor that enables real-time continuous monitoring of O2â¢- release in cell cultures for extended periods (> 8 h) using an O2â¢- specific microelectrode. To achieve the sensitivity and selectivity requirements for cellular sensing, we developed a biohybrid system consisting of superoxide dismutase (SOD) and Ti3C2Tx MXenes, deposited on a gold microwire electrode (AuME) as O2â¢- specific materials with catalytic amplification through the synergistic action of the enzyme and the biomimetic MXenes-based structure. The biosensor demonstrated a sensitivity of 18.35 nA/µM with a linear range from 147 to 930 nM in a cell culture medium. To demonstrate its robustness and practicality, we applied the biosensor to monitor O2â¢- levels in human leukemia monocytic THP-1 cells upon stimulation with lipopolysaccharide (LPS). Using this strategy, we successfully monitored LPS-induced O2â¢- in THP-1 cells, as well as the quenching effect induced by the ROS scavenger N-acetyl-L-cysteine (NAC). The biosensor is generally useful for exploring the role of oxidative stress and longitudinally monitoring O2â¢- release in cell cultures, enabling studies of biochemical processes and associated oxidative stress mechanisms in cellular and other biological environments.
Asunto(s)
Técnicas Biosensibles , Superóxido Dismutasa , Superóxidos , Humanos , Superóxidos/metabolismo , Superóxidos/análisis , Técnicas Biosensibles/métodos , Superóxido Dismutasa/metabolismo , Células THP-1 , Técnicas Electroquímicas/métodos , Técnicas Electroquímicas/instrumentación , Lipopolisacáridos/farmacología , Límite de DetecciónRESUMEN
Per- and polyfluoroalkyl substances (PFAS) pose a significant threat to the environment due to their persistence, ability to bioaccumulate, and harmful effects. Methods to quantify PFAS rapidly and effectively are essential to analyze and track contamination, but measuring PFAS down to the ultralow regulatory levels is extremely challenging. Here, we describe the development of a low-cost sensor that can measure a representative PFAS, perfluorooctanesulfonic acid (PFOS), at the parts per quadrillion (ppq) level within 5 min. The method combines the ability of PFOS to bind to silver nanoparticles (AgNPs) embedded within a fluorine-rich Ti3C2-based multilayered MXene, which provides a large surface area and accessible binding sites for direct impedimetric detection. Fundamentally, we show that MXene-AgNPs are capable of binding PFOS and other long-chain PFAS compounds, though the synergistic action of AgNPs and MXenes via electrostatic and F-F interactions. This binding induced concentration-dependent changes in the charge-transfer resistance, enabling rapid and direct quantification with extremely high sensitivity and no response to interferences. The sensor displayed a linear range from 50 ppq to 1.6 ppt (parts per trillion) with an impressively low limit of detection of 33 ppq and a limit of quantification of 99 ppq, making this sensor a promising candidate for low-cost screening of the PFAS content in water samples, using a simple and inexpensive procedure.
Asunto(s)
Ácidos Alcanesulfónicos , Técnicas Electroquímicas , Fluorocarburos , Nanopartículas del Metal , Plata , Fluorocarburos/química , Fluorocarburos/análisis , Nanopartículas del Metal/química , Plata/química , Técnicas Electroquímicas/métodos , Técnicas Electroquímicas/instrumentación , Ácidos Alcanesulfónicos/análisis , Ácidos Alcanesulfónicos/química , Límite de Detección , Contaminantes Químicos del Agua/análisisRESUMEN
Cerium oxide nanoparticles (CeNPs) are versatile materials with unique and unusual properties that vary depending on their surface chemistry, size, shape, coating, oxidation states, crystallinity, dopant, and structural and surface defects. This review encompasses advances made over the past twenty years in the development of CeNPs and ceria-based nanostructures, the structural determinants affecting their activity, and translation of these distinct features into applications. The two oxidation states of nanosized CeNPs (Ce3+/Ce4+) coexisting at the nanoscale level facilitate the formation of oxygen vacancies and defect states, which confer extremely high reactivity and oxygen buffering capacity and the ability to act as catalysts for oxidation and reduction reactions. However, the method of synthesis, surface functionalization, surface coating and defects are important factors in determining their properties. This review highlights key properties of CeNPs, their synthesis, interactions, and reaction pathways and provides examples of emerging applications. Due to their unique properties, CeNPs have become quintessential candidates for catalysis, chemical mechanical planarization (CMP), sensing, biomedical applications, and environmental remediation, with tremendous potential to create novel products and translational innovations in a wide range of industries. This review highlights the timely relevance and the transformative potential of these materials in addressing societal challenges and driving technological advancements across these fields.
RESUMEN
Porous organic frameworks (POFs) represent a significant subclass of nanoporous materials in the field of materials science, offering exceptional characteristics for advanced applications. Covalent organic frameworks (COFs), as a novel and intriguing type of porous material, have garnered considerable attention due to their unique design capabilities, diverse nature, and wide-ranging applications. The unique structural features of COFs, such as high surface area, tuneable pore size, and chemical stability, render them highly attractive for various applications, including targeted and controlled drug release, as well as improving the sensitivity and selectivity of electrochemical biosensors. Therefore, it is crucial to comprehend the methods employed in creating COFs with specific properties that can be effectively utilized in biomedical applications. To address this indispensable fact, this review paper commences with a concise summary of the different methods and classifications utilized in synthesizing COFs. Second, it highlights the recent advancements in COFs for drug delivery, including drug carriers as well as the classification of drug delivery systems and biosensing, encompassing drugs, biomacromolecules, small biomolecules and the detection of biomarkers. While exploring the potential of COFs in the biomedical field, it is important to acknowledge the limitations that researchers may encounter, which could impact the practicality of their applications. Third, this paper concludes with a thought-provoking discussion that thoroughly addresses the challenges and opportunities associated with leveraging COFs for biomedical applications. This review paper aims to contribute to the scientific community's understanding of the immense potential of COFs in improving drug delivery systems and enhancing the performance of biosensors in biomedical applications.
Asunto(s)
Técnicas Biosensibles , Portadores de Fármacos , Estructuras Metalorgánicas , Técnicas Biosensibles/métodos , Estructuras Metalorgánicas/química , Portadores de Fármacos/química , Sistemas de Liberación de Medicamentos , HumanosRESUMEN
Climate change, particularly drought stress, significantly impacts plant growth and development, necessitating the development of resilient crops. This study investigated physiological and molecular modulations to drought stress between diploid parent species and their polyploid progeny in the Brassica species. While no significant phenotypic differences were observed among the six species, drought stress reduced growth parameters by 2.4% and increased oxidative stress markers by 1.4-fold. Drought also triggered the expression of genes related to stress responses and led to the accumulation of specific metabolites. We also conducted the first study of perfluorooctane sulfonic acid (PFOS) levels in leaves as a drought indicator. Lower levels of PFOS accumulation were linked to plants taking in less water under drought conditions. Both diploid and polyploid species responded to drought stress similarly, but there was a wide range of variation in their responses. In particular, responses were less variable in polyploid species than in diploid species. This suggests that their additional genomic components acquired through polyploidy may improve their flexibility to modulate stress responses. Despite the hybrid vigor common in polyploid species, Brassica polyploids demonstrated intermediate responses to drought stress. Overall, this study lays the framework for future omics-level research, including transcriptome and proteomic studies, to deepen our understanding of drought tolerance mechanisms in Brassica species.
Asunto(s)
Brassica , Brassica/genética , Estrés Fisiológico/genética , Sequías , Proteómica , PoliploidíaRESUMEN
Ensuring water quality and safety requires the effective detection of emerging contaminants, which present significant risks to both human health and the environment. Field deployable low-cost sensors provide solutions to detect contaminants at their source and enable large-scale water quality monitoring and management. Unfortunately, the availability and utilization of such sensors remain limited. This Perspective examines current sensing technologies for detecting emerging contaminants and analyzes critical barriers, such as high costs, lack of reliability, difficulties in implementation in real-world settings, and lack of stakeholder involvement in sensor design. These technical and nontechnical barriers severely hinder progression from proof-of-concepts and negatively impact user experience factors such as ease-of-use and actionability using sensing data, ultimately affecting successful translation and widespread adoption of these technologies. We provide examples of specific sensing systems and explore key strategies to address the remaining scientific challenges that must be overcome to translate these technologies into the field such as improving sensitivity, selectivity, robustness, and performance in real-world water environments. Other critical aspects such as tailoring research to meet end-users' requirements, integrating cost considerations and consumer needs into the early prototype design, establishing standardized evaluation and validation protocols, fostering academia-industry collaborations, maximizing data value by establishing data sharing initiatives, and promoting workforce development are also discussed. The Perspective describes a set of guidelines for the development, translation, and implementation of water quality sensors to swiftly and accurately detect, analyze, track, and manage contamination.
Asunto(s)
Tecnología , Calidad del Agua , Humanos , Reproducibilidad de los ResultadosRESUMEN
Two-dimensional (2D) layered materials that integrate metallic conductivity, catalytic activity and the ability to stabilize biological receptors provide unique capabilities for designing electrochemical biosensors for large-scale detection and diagnostic applications. Herein, we report a multifunctional MXene-based 2D nanostructure decorated with enzyme mimetic cerium oxide nanoparticle (MXCeO2) as a novel platform and catalytic amplifier for electrochemical biosensors, specifically targeting the detection of oxidase enzyme substrates. We demonstrate enhanced catalytic efficiency of the MXCeO2 for the reduction of hydrogen peroxide (H2O2) and its ability to immobilize oxidase enzymes, such as glucose oxidase, lactate oxidase and xanthine oxidase. The designed biosensors exhibit high selectivity, stability, and sensitivity, achieving detection limits of 0.8 µM H2O2, 0.49 µM glucose, 3.6 µM lactate and 1.7 µM hypoxanthine, when the MXCeO2 and their respective enzymes were used. The MXCeO2 was successfully incorporated into a wearable fabric demonstrating high sensitivity for lactate measurements in sweat. The unique combination of MXenes with CeO2 offers excellent conductivity, catalytic efficiency and enhanced enzyme loading, demonstrating potential of the MXCeO2 as a catalytically active material to boost efficiency of oxidase enzyme reactions. This design can be used as a general platform for increasing the sensitivity of enzyme based biosensors and advance the development of electrochemical biosensors for a variety of applications.
Asunto(s)
Técnicas Biosensibles , Dispositivos Electrónicos Vestibles , Técnicas Biosensibles/métodos , Sudor , Peróxido de Hidrógeno , Glucosa Oxidasa/química , Lactatos , Técnicas Electroquímicas/métodosRESUMEN
Metal-organic frameworks (MOFs) with intrinsic luminescent properties, modular structure, and tunable electronic properties, provide unique opportunities for designing target-specific molecular sensors by systematically choosing their constituent building blocks. We report a simple one-step MOF-based sensing platform for phosphate (P) detection that combines the luminescent properties of 2-aminoterephthalic acid (ATA) with the affinity of rationally selected nodes in UiO-66-NH2 to bind with P. This MOF possesses an electron-donating amine group that controls the light-harvesting characteristics of the linkers. Substituting Zr6 node with Ce6 or Hf6 results in a series of isostructural MOFs with distinct optical properties that are nonexistent in the unsubstituted MOF. We have utilized these MOFs to quantitatively measure P, using its ability to bind strongly to metal nodes inhibiting the LMCT process and altering the linker's photon emission. Using this system, detection limits of 4.5, 7.2 and 10.5 µM were obtained for the UiO-66-NH2(Ce), UiO-66-NH2, and UiO-66-NH2(Hf) respectively, adopting a straightforward single step procedure. These results demonstrate that the selection of metal nodes in a series of isostructural MOFs can be used to modulate their electronic properties and create sensing probes possessing the desired characteristics needed for the detection of environmental contaminants.
RESUMEN
Oxidative stress and excessive accumulation of the superoxide (O2.-) anion are at the genesis of many pathological conditions and the onset of several diseases. The real time monitoring of (O2.-) release is important to assess the extent of oxidative stress in these conditions. Herein, we present the design, fabrication and characterization of a robust (O2.-) biosensor using a simple and straightforward procedure involving deposition of a uniform layer of L-Cysteine on a gold wire electrode to which Cytochrome C (Cyt c) was conjugated. The immobilized layers, studied using conductive Atomic Force Microscopy (c-AFM) revealed a stable and uniformly distributed redox protein on the gold surface, visualized as conductivity and surface topographical plots. The biosensor enabled detection of (O2.-) at an applied potential of 0.15 V with a sensitivity of 42.4 nA/µM and a detection limit of 2.4 nM. Utility of the biosensor was demonstrated in measurements of real time (O2.-) release in activated human blood platelets and skeletal rat limb muscles following ischemia reperfusion injury (IRI), confirming the biosensor's stability and robustness for measurements in complex biological systems. The results demonstrate the ability of these biosensors to monitor real time release of (O2.-) and estimate the extent of oxidative injury in models that could easily be translated to human pathologies.
Asunto(s)
Técnicas Biosensibles , Citocromos c , Humanos , Animales , Ratas , Superóxidos , Plaquetas , Oro , Músculo EsqueléticoRESUMEN
Nanoelectrochemistry allows for the investigation of the interaction of per- and polyfluoroalkyl substances (PFASs) with silver nanoparticles (AgNPs) and the elucidation of the binding behaviour of PFASs to nanoscale surfaces with high sensitivity. Mechanistic studies supported by single particle collision electrochemistry (SPCE), spectroscopic and density functional theory (DFT) calculations indicate the capability of polyfluorooctane sulfonic acid (PFOS), a representative PFAS, to selectively bind and induce aggregation of AgNPs. Single-particle measurements provide identification of the "discrete" AgNPs agglomeration (e.g. 2-3 NPs) formed through the inter-particles F-F interactions and the selective replacement of the citrate stabilizer by the sulfonate of the PFOS. Such interactions are characteristic only for long chain PFAS (-SO3 - ) providing a means to selectively identify these substances down to ppt levels. Measuring and understanding the interactions of PFAS at nanoscale surfaces are crucial for designing ultrasensitive methods for detection and for modelling and predicting their interaction in the environment.
Asunto(s)
Fluorocarburos , Nanopartículas del Metal , Contaminantes Químicos del Agua , Alcanosulfonatos , Citratos , Fluorocarburos/química , Plata , Contaminantes Químicos del Agua/análisisRESUMEN
Neurotransmitters are involved in functions related to signaling, stress response, and pathological disorder development, and thus, their real-time monitoring at the site of production is important for observing the changes related to these disorders. Here, we demonstrate the first time-dependent quantification of dopamine in the brains of live zebrafish embryos using electrochemically pretreated carbon fiber microelectrodes (CFMEs) utilizing differential pulse voltammetry as the measurement technique. The pretreatment of the CFMEs in 0.1 M NaOH held at a potential of +1.0 V for 600 s improves the sensitivity toward dopamine and allows for reliable measurements in low ionic strength media. We demonstrate the measurement of extracellular dopamine concentrations in the zebrafish brain during late embryogenesis. The extracellular dopamine concentration in the tectum of zebrafish varies between 200 and 400 nM. The conventional pharmacological manipulation of neurotransmitter levels in the brain demonstrates the selective detection of dopamine at the implantation site. Exposure to the dopamine transporter inhibitor nomifensine induces an increase in extracellular dopamine from 201.9 (±34.9) nM to 352.2 (±20.0) nM, while exposure to the norepinephrine transporter inhibitor desipramine does not lead to a significant modulation of the measured signal. Furthermore, we report the quantitative assessment of the catecholamine stress response of embryos to tricaine, an anesthetic frequently used in zebrafish assays. Exposure to tricaine induces a short-lived increase in brain dopamine from 198.6 (±15.7) nM to a maximum of 278.8 (±14.0) nM. Thus, in vivo electrochemistry can detect real-time changes in zebrafish neurochemical physiology resulting from drug exposure.
RESUMEN
Development of fast and sensitive assays for enzyme activity detection has received a great deal of attention because of the wide spread applications in measurements of numerous clinical, food and environmental processes. Herein, a novel amplification approach to enhance the sensitivity of colorimetric assays for detection of ß-galactosidase (ß-Gal) activity is proposed. ß-Gal detection is important in biomedical applications and in food industry, where it is associated with the ripening process of fruits. The method is based on the use of multivalent cerium oxide nanoparticles (CeNPs) which catalyze the oxidation of 4-aminophenol (4-AP) produced in the hydrolysis process of the 4-aminophenyl-ß-d-galactopyranoside substrate (4-APG) by ß-Gal, thus enhancing detection sensitivity of ß-Gal in the visible range. The developed assay is highly sensitive and easy to use. Using the optimized procedure, a limit of detection of 0.06 mU/mL was obtained with a linearity range up to 2.0 mU/mL. The feasibility of the method was demonstrated for detection of ß-Gal activity in fruits and the results were compared with the conventional assay, providing over a 30-fold amplification as compared to a commercially available ß-Gal protocol. The advantage of the presented assay is its biocatalytic event amplified by a secondary reaction, which enables much more sensitive detection of the enzymatic product. The sensing platform can be applied broadly to a variety of applications that rely on ß-Gal activity measurements.
Asunto(s)
Frutas , Nanopartículas , Colorimetría , Frutas/metabolismo , Oxidación-Reducción , beta-Galactosidasa/metabolismoRESUMEN
Nanomaterials obtained from sustainable and natural sources have seen tremendous growth in recent times due to increasing interest in utilizing readily and widely available resources. Nanocellulose materials extracted from renewable biomasses hold great promise for increasing the sustainability of conventional materials in various applications owing to their biocompatibility, mechanical properties, ease of functionalization, and high abundance. Nanocellulose can be used to reinforce mechanical strength, impart antimicrobial activity, provide lighter, biodegradable, and more robust materials for packaging, and produce photochromic and electrochromic devices. While the fabrication and properties of nanocellulose are generally well established, their implementation in novel products and applications requires surface modification, assembly, and manufacturability to enable rapid tooling and scalable production. Additive manufacturing techniques such as 3D printing can improve functionality and enhance the ability to customize products while reducing fabrication time and wastage of materials. This review article provides an overview of nanocellulose as a sustainable material, covering the different properties, preparation methods, printability and strategies to functionalize nanocellulose into 3D-printed constructs. The applications of 3D-printed nanocellulose composites in food, environmental, and energy devices are outlined, and an overview of challenges and opportunities is provided.
RESUMEN
Current advancements in the development of functional nanomaterials and precisely designed nanostructures have created new opportunities for the fabrication of practical biosensors for field analysis. Two-dimensional (2D) and three-dimensional (3D) nanomaterials provide unique hierarchical structures, high surface area, and layered configurations with multiple length scales and porosity, and the possibility to create functionalities for targeted recognition at their surface. Such hierarchical structures offer prospects to tune the characteristics of materials-e.g., the electronic properties, performance, and mechanical flexibility-and they provide additional functions such as structural color, organized morphological features, and the ability to recognize and respond to external stimuli. Combining these unique features of the different types of nanostructures and using them as support for bimolecular assemblies can provide biosensing platforms with targeted recognition and transduction properties, and increased robustness, sensitivity, and selectivity for detection of a variety of analytes that can positively impact many fields. Herein, we first provide an overview of the recently developed 2D nanostructures focusing on the characteristics that are most relevant for the design of practical biosensors. Then, we discuss the integration of these materials with bio-elements such as bacteriophages, antibodies, nucleic acids, enzymes, and proteins, and we provide examples of applications in the environmental, food, and clinical fields. We conclude with a discussion of the manufacturing challenges of these devices and opportunities for the future development and exploration of these nanomaterials to design field-deployable biosensors.
Asunto(s)
Técnicas Biosensibles , Nanoestructuras , Anticuerpos , Técnicas ElectroquímicasRESUMEN
Enzymatic biosensors enjoy commercial success and are the subject of continued research efforts to widen their range of practical application. For these biosensors to reach their full potential, their selectivity challenges need to be addressed by comprehensive, solid approaches. This review discusses the status of enzymatic biosensors in achieving accurate and selective measurements via direct biocatalytic and inhibition-based detection, with a focus on electrochemical enzyme biosensors. Examples of practical solutions for tackling the activity and selectivity problems and preventing interferences from co-existing electroactive compounds in the samples are provided such as the use of permselective membranes, sentinel sensors and coupled multi-enzyme systems. The effect of activators, inhibitors or enzymatic substrates are also addressed by coupled enzymatic reactions and multi-sensor arrays combined with data interpretation via chemometrics. In addition to these more traditional approaches, the review discusses some ingenious recent approaches, detailing also on possible solutions involving the use of nanomaterials to ensuring the biosensors' selectivity. Overall, the examples presented illustrate the various tools available when developing enzyme biosensors for new applications and stress the necessity to more comprehensively investigate their selectivity and validate the biosensors versus standard analytical methods.
Asunto(s)
Técnicas Biosensibles , NanoestructurasRESUMEN
Microbial electrochemical systems are a fast emerging technology that use microorganisms to harvest the chemical energy from bioorganic materials to produce electrical power. Due to their flexibility and the wide variety of materials that can be used as a source, these devices show promise for applications in many fields including energy, environment and sensing. Microbial electrochemical systems rely on the integration of microbial cells, bioelectrochemistry, material science and electrochemical technologies to achieve effective conversion of the chemical energy stored in organic materials into electrical power. Therefore, the interaction between microorganisms and electrodes and their operation at physiological important potentials are critical for their development. This article provides an overview of the principles and applications of microbial electrochemical systems, their development status and potential for implementation in the biosensing field. It also provides a discussion of the recent developments in the selection of electrode materials to improve electron transfer using nanomaterials along with challenges for achieving practical implementation, and examples of applications in the biosensing field.
Asunto(s)
Fuentes de Energía Bioeléctrica , Técnicas Biosensibles , Nanoestructuras , Electricidad , Electrodos , Transporte de ElectrónRESUMEN
Proteins are utilized across many biomedical and pharmaceutical industries; therefore, methods for rapid and accurate monitoring of protein aggregation are needed to ensure proper product quality. Although these processes have been previously studied, it is difficult to comprehensively evaluate protein folding and aggregation by traditional characterization techniques such as atomic force microscopy (AFM), electron microscopy, or X-ray diffraction, which require sample pre-treatment and do not represent native state proteins in solution. Herein, we report early tracking of lysozyme (Lyz) aggregation states by using single-particle collision electrochemistry (SPCE) of silver nanoparticle (AgNP) redox probes. The method relies on monitoring the rapid interaction of Lyz with AgNPs, which decreases the number of single AgNPs available for collisions and ultimately the frequency of oxidative impacts in the chronoamperometric profile. When Lyz is in a non-aggregated monomeric form, the protein forms a homogeneous coverage onto the surface of AgNPs, stabilizing the particles. When Lyz is aggregated, part of the AgNP surface remains uncoated, promoting the agglomeration of Lyz-AgNP conjugates. The frequency of AgNP impacts decreases with increasing aggregation time, providing a metric to track protein aggregation. Visualizations of integrated oxidation charge-transfer data displayed significant differences between the charge transfer per impact for AgNP samples alone and in the presence of non-aggregated and aggregated Lyz with 99% confidence using parametric ANOVA tests. Electrochemical results revealed meaningful associations with UV-vis, circular dichroism, and AFM, demonstrating that SPCE can be used as an alternative method for studying protein aggregation. This electrochemical technique could serve as a powerful tool to indirectly evaluate protein stability and screen protein samples for formation of aggregates.
Asunto(s)
Antiinfecciosos/química , Técnicas Electroquímicas/métodos , Muramidasa/química , Nanopartículas del Metal , Microscopía de Fuerza Atómica , Plata , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Food freshness monitoring, which can reflect the quality of the product at the time of use, remains a great challenge for consumers and the food industry. Herein, we report the development of a cost-effective enzyme-based paper biosensor, which can monitor fish freshness and predict spoilage. The biosensor measures the release of hypoxanthine (HX), an indicator of meat and fish degradation, using the enzymatic conversion of HX by xanthine oxidase (XOD). We demonstrate that the entrapment of XOD and an organic dye, nitro blue tetrazolium chloride (NBT), within a sol-gel biohybrid enables their stabilization on paper and promotes the enzymatic reaction with further retention of the reaction products within the cellulosic network . Linearity in the micromolar concentration range with a detection limit of 3.7 µM for HX is obtained. The biosensor has high selectivity toward HX and is manufactured in few steps from inexpensive widely available materials. The applicability of the biosensor is demonstrated by following fish degradation over time and measuring HX concentrations ranging from 117 (±9) to 198 (±5) µM within 24 h of degradation, at levels that are comparable with those measured by a commercial enzymatic kit for HX detection. As compared to the commercial kit, our biosensors are more cost-effective, do not require addition of exogenous reagents and are portable, having all of the reagents needed for analysis embedded within the sensing platform. This proof-of-concept work demonstrates that the paper-based HX biosensor has potential as a robust reagentless device for real-time monitoring of food freshness and for other applications in which HX plays an important role.
Asunto(s)
Técnicas Biosensibles , Animales , Peces , Hipoxantina , Carne/análisis , Xantina OxidasaRESUMEN
Phosphate removal has become a critical need to mitigate the negative effect of water eutrophication, which is responsible for the overgrowth of toxic algal blooms and the significant ecological harm generated to aquatic ecosystems. However, some of the currently available adsorbents have low removal capacity and function optimally at specific pH ranges. Here, we present an example of a cerium-based metal-organic framework (MOF) as a high-capacity sorbent for phosphate removal from eutrophic waters. Specifically, a Ce(IV)-based UiO-66 analogue, Ce 1,4-benzenedicarboxylate (Ce-BDC), was selected due to its water stability, high surface area, microporous structure, and the high binding affinity of phosphate with its open metal sites. Mechanistic studies supported by density functional theory (DFT) calculations indicate the formation of a Ce-O-P bond through ion exchange between the terminal (nonbridging) hydroxyl groups at the missing linker sites and the phosphate adducts. Experimental results demonstrate that Ce-BDC is highly selective for phosphates over other common anions (Cl-, Br-, I-, NO3-, HCO3-, SO42-) and stable in a broad pH range of (2-12), covering the relevant range for the treatment of contaminants in aquatic systems. The sorbent shows a fast removal rate, capturing significant amounts of phosphate within 4 min with a maximum adsorption capacity of 179 mg·g-1, outperforming other porous materials. These results show a remarkable adsorption capacity and fast kinetics compared with the current state-of-the-art crystalline porous materials. This study may advance the design of new microporous materials with high adsorption capabilities, good stability, and make a significant contribution to the development of future generation technology to mitigate the negative effects of water eutrophication.