Unlocking the Activity of Molecular Assemblies for CO2 Electroreduction in Zero-Gap Electrolysers via Catalyst Ink Engineering.

In recent years, CO2 electrolysis, particularly the electrochemical reduction of CO2 to CO in zero-gap systems, has gained significant attention. While Ag-coated gas diffusion electrodes are commonly used in state-of-the-art systems, heterogenized molecular catalysts like bis-coordinated homoleptic silver(I) N,N-bis(arylimino)-acenaphthene (Ag-BIAN) complexes are emerging as a promising alternative due to their tunability and high mass activity. In this study, the influence of ink composition on the performance of Ag-BIAN-based GDEs in zero-gap electrolyzers (ZGEs) are systematically explored at 60 °C and 600 mA cm⁻2. Sedimentation analyses across various solvents informed the selection of optimal solvent-catalyst and solvent-carbon additive combinations, streamlining the GDE optimization process and reducing associated costs and time. These results demonstrate that solvent choice and dilution state of the ink are critical factors impacting CO2 reduction, achieving faradaic efficiencies for CO production (FECO) up to 67% at 600 mA cm⁻2 with catalyst loadings as low as 0.2 mg cm⁻2. These findings lay the groundwork for advancing from homogeneous H-type cells to industrial ZGE systems through tailored ink engineering.

Improving Active Site Local Proton Transfer in Porous Organic Polymers for Boosted Oxygen Electrocatalysis.

Improving proton transfer is vital for electrocatalysis with porous materials. Although several strategies are reported to assist proton transfer in channels, few studies are dedicated to improving proton transfer at the local environments of active sites in porous materials. Herein, we report on new Co-corrole-based porous organic polymers (POPs) with improved proton transfer for electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). By tuning the pore sizes and installing proton relays at Co corrole sites, we designed and synthesized POP-2-OH with improved proton transfer both in channels and at local Co active sites. This POP shows remarkable activity for both electrocatalytic ORR with E1/2=0.91 V vs RHE and OER with η10=255 mV. Therefore, this work is significant to present a strategy to improve active site local proton transfer in porous materials and highlight the key role of such structural functionalization in boosting oxygen electrocatalysis.

Acid-catalyzed Transformation of Nitrite to Nitric Oxide on Copper(II)-Cobalt(II) Centers in a Bimetallic Complex.

Nitrite (NO2 -) serves as a pool of nitric oxide (NO) in biological systems under hypoxic conditions, and it is transformed to NO by nitrite reductase (NiR) enzyme in the presence of acid (H+ ions). However, NO synthases (NOSs) generate NO via L-arginine oxidation in normoxic conditions. Previously, acid-induced NO2 - reduction chemistry was modeled on mono-metallic 3d-metals, generating metal-nitrosyls or NO(g) with H2O or H2O2 products. Herein, to understand the relative potency of a bimetallic system, we report the acid-induced reductive conversion of η2-bound NO2 - to NO on CuII-CoII centers of a hetero-bimetallic CuII-nitrito-CoII complex, [(LN8H)CuII-NO2 --CoII]3+ (CuII-NO2 --CoII, 2) bearing an octadentate N8-cryptand ligand (LN8H). The CuII-NO2 --CoII generates [CuII(LN8H)CoII]4+ (1) upon reaction with one equiv. acid (HClO4, H+ ions source) with NO(g) via a presumed transient nitrousacid (ONOH) intermediate species. Likewise, this NO2 - reduction was found to form H2O, which is believed to be from the decomposition of H2O2, an intermediate species. In addition, complex 2, in the presence of more than one equiv. H+ ions also showed the formation of NO(g) with H2O. Mechanistic investigations, using 15N-labeled-15NO2 -, 18O-labeled-18O14N16O- and 2H-labeled-DClO4 (D+ source), revealed that the N-atom and O-atom in the 14/15NO and 14N18O gases are derived from NO2 - ligand and H-atom in H2O derived from H+-source, respectively.

Insights into the Electrochemical CO2RR Performance and Binding of Small Molecules on Quaternary Thiospinels Ag2FeSn3S8 and Cu2FeSn3S8.

Using a mechanical synthesis method in the form of ball milling and an additional annealing step, a novel and accelerated route for the synthesis of the thiospinels toyohaite (Ag2FeSn3S8) and rhodostannite (Cu2FeSn3S8) was discovered. Both thiospinels display faradaic efficiencies of up to 73% for CO2 reduction to CO using an organic electrolyte in an H-type cell. The materials were furthermore implemented in a zero-gap electrolyzer, with toyohaite producing 22% CO and 52% H2 at 100 mA cm-2 and rhodostannite 28% CO and 37% H2. The catalytically active sites are studied using density functional theory, revealing strong CO binding interactions on both Ag and Cu, whereas Sn is found to contribute to the decomposition of Ag2FeSn3S8 and Cu2FeSn3S8 by coordination with oxygen. Postmortem analysis of the thiospinel-based electrodes by means of SEM-EDX, XRD, XPS, and Mössbauer spectroscopy showed sulfur leaching from the catalysts after applying 100 mA cm-2. These spectroscopic results-in conjunction with DFT calculations of the oxidized surfaces-suggest that the catalytically active species consists of metal oxides. As a conversion of the metal sulfides into the corresponding metallic species was observed via XRD, the decomposition pathways of both catalysts were also computed using DFT; thus, elucidating the energetically most favorable decomposition products and expanding the possible composition of the catalysts postelectrolysis.

Oxygen sensitivity of [FeFe]-hydrogenase: a comparative study of active site mimics inside vs. outside the enzyme.

[FeFe]-hydrogenase is nature's most efficient proton reducing and H2-oxidizing enzyme. However, biotechnological applications are hampered by the O2 sensitivity of this metalloenzyme, and the mechanism of aerobic deactivation is not well understood. Here, we explore the oxygen sensitivity of four mimics of the organometallic active site cofactor of [FeFe]-hydrogenase, [Fe2(adt)(CO)6-x(CN)x]x- and [Fe2(pdt)(CO)6-x(CN)x]x- (x = 1, 2) as well as the corresponding cofactor variants of the enzyme by means of infrared, Mössbauer, and NMR spectroscopy. Additionally, we describe a straightforward synthetic recipe for the active site precursor complex Fe2(adt)(CO)6. Our data indicate that the aminodithiolate (adt) complex, which is the synthetic precursor of the natural active site cofactor, is most oxygen sensitive. This observation highlights the significance of proton transfer in aerobic deactivation, and supported by DFT calculations facilitates an identification of the responsible reactive oxygen species (ROS). Moreover, we show that the ligand environment of the iron ions critically influences the reactivity with O2 and ROS like superoxide and H2O2 as the oxygen sensitivity increases with the exchange of ligands from CO to CN-. The trends in aerobic deactivation observed for the model complexes are in line with the respective enzyme variants. Based on experimental and computational data, a model for the initial reaction of [FeFe]-hydrogenase with O2 is developed. Our study underscores the relevance of model systems in understanding biocatalysis and validates their potential as important tools for elucidating the chemistry of oxygen-induced deactivation of [FeFe]-hydrogenase.

The "Pull Effect" of a Hanging ZnII on Improving the Four-Electron Oxygen Reduction Selectivity with Co Porphyrin.

Due to the challenge of cleaving O-O bonds at single Co sites, mononuclear Co complexes typically show poor selectivity for the four-electron (4e-) oxygen reduction reaction (ORR). Herein, we report on selective 4e- ORR catalyzed by a Co porphyrin with a hanged ZnII ion. Inspired by Cu/Zn-superoxide dismutase, we designed and synthesized 1-CoZn with a hanging ZnII at the second sphere of a Co porphyrin. Complex 1-CoZn is much more effective than its Zn-lacking analogues to catalyze the 4e- ORR in neutral aqueous solutions, giving an electron number of 3.91 per O2 reduction. With spectroscopic studies, the hanging ZnII was demonstrated to be able to facilitate the electron transfer from CoII to O2, through an electronic "pull effect", to give CoIII-superoxo. Theoretical studies further suggested that this "pull effect" plays crucial roles in assisting O-O bond cleavage. This work is significant to present a new strategy of hanging a ZnII to improve O2 activation and O-O bond cleavage.

Cobalt(III)-Macrocyclic Scaffolds with Anti-Cancer Stem Cell Activity.

Cobalt(III) compounds with tetradentate ligands have been widely employed to deliver cytotoxic and imaging agents into cells. A large body of work has focused on using cobalt(III)-cyclam scaffolds for this purpose. Here, we investigate the cytotoxic properties of cobalt(III) complexes containing 14-membered macrocycles related to cyclam. A breast cancer stem cell (CSC) in vitro model was used to gauge efficacy. Specifically, [Co(1,4,7,11-tetraazacyclotetradecane)Cl2]+ (1) and [Co(1-oxa-4,8,12-triazacyclotetradecane)Cl2]+ (2) were synthesised and characterised, and their breast CSC activity was determined. The cobalt(III) complexes 1 and 2 displayed micromolar potency towards bulk breast cancer cells and breast CSCs grown in monolayers. Notably, 1 and 2 displayed selective potency towards breast CSCs over bulk breast cancer cells (up to 4.5-fold), which was similar to salinomycin (an established breast CSC-selective agent). The cobalt(III) complexes 1 and 2 were also able to inhibit mammosphere formation at low micromolar doses (with respect to size and number). The mammopshere inhibitory effect of 2 was similar to that of salinomycin. Our studies show that cobalt(III) complexes with 1,4,7,11-tetraazacyclotetradecane and 1-oxa-4,8,12-triazacyclotetradecane macrocycles could be useful starting points for the development of new cobalt-based delivery systems that can transport cytotoxic and imaging agents into breast CSCs.

A Conserved Binding Pocket in HydF is Essential for Biological Assembly and Coordination of the Diiron Site of [FeFe]-Hydrogenases.

The active site cofactor of [FeFe]-hydrogenases consists of a cubane [4Fe-4S]-cluster and a unique [2Fe-2S]-cluster, harboring unusual CO- and CN--ligands. The biosynthesis of the [2Fe-2S]-cluster requires three dedicated maturation enzymes called HydG, HydE and HydF. HydG and HydE are both involved in synthesizing a [2Fe-2S]-precursor, still lacking parts of the azadithiolate (adt) moiety that bridge the two iron atoms. This [2Fe-2S]-precursor is then finalized within the scaffold protein HydF, which binds and transfers the [2Fe-2S]-precursor to the hydrogenase. However, its exact binding mode within HydF is still elusive. Herein, we identified the binding location of the [2Fe-2S]-precursor by altering size and charge of a highly conserved protein pocket via site directed mutagenesis (SDM). Moreover, we identified two serine residues that are essential for binding and assembling the [2Fe-2S]-precursor. By combining SDM and molecular docking simulations, we provide a new model on how the [2Fe-2S]-cluster is bound to HydF and demonstrate the important role of one highly conserved aspartate residue, presumably during the bioassembly of the adt moiety.

FeNi2S4-A Potent Bifunctional Efficient Electrocatalyst for the Overall Electrochemical Water Splitting in Alkaline Electrolyte.

For a carbon-neutral society, the production of hydrogen as a clean fuel through water electrolysis is currently of great interest. Since water electrolysis is a laborious energetic reaction, it requires high energy to maintain efficient and sustainable production of hydrogen. Catalytic electrodes can reduce the required energy and minimize production costs. In this context, herein, a bifunctional electrocatalyst made from iron nickel sulfide (FeNi2S4 [FNS]) for the overall electrochemical water splitting is introduced. Compared to Fe2NiO4 (FNO), FNS shows a significantly improved performance toward both OER and HER in alkaline electrolytes. At the same time, the FNS electrode exhibits high activity toward the overall electrochemical water splitting, achieving a current density of 10 mA cm-2 at 1.63 V, which is favourable compared to previously published nonprecious electrocatalysts for overall water splitting. The long-term chronopotentiometry test reveals an activation followed by a subsequent stable overall cell potential at around 2.12 V for 20 h at 100 mA cm-2.

Switching Electrocatalytic Hydrogen Evolution Pathways through Electronic Tuning of Copper Porphyrins.

The electronic structure of metal complexes plays key roles in determining their catalytic features. However, controlling electronic structures to regulate reaction mechanisms is of fundamental interest but has been rarely presented. Herein, we report electronic tuning of Cu porphyrins to switch pathways of the hydrogen evolution reaction (HER). Through controllable and regioselective ß-oxidation of Cu porphyrin 1, we synthesized analogues 2-4 with one or two ß-lactone groups in either a cis or trans configuration. Complexes 1-4 have the same Cu-N4 core site but different electronic structures. Although ß-oxidation led to large anodic shifts of reductions, 1-4 displayed similar HER activities in terms of close overpotentials. With electrochemical, chemical and theoretical results, we show that the catalytically active species switches from a CuI species for 1 to a Cu0 species for 4. This work is thus significant to present mechanism-controllable HER via electronic tuning of catalysts.

A Dynamic Water Channel Affects O2 Stability in [FeFe]-Hydrogenases.

[FeFe]-hydrogenases are capable of reducing protons at a high rate. However, molecular oxygen (O2 ) induces the degradation of their catalytic cofactor, the H-cluster, which consists of a cubane [4Fe4S] subcluster (4FeH ) and a unique diiron moiety (2FeH ). Previous attempts to prevent O2 -induced damage have focused on enhancing the protein's sieving effect for O2 by blocking the hydrophobic gas channels that connect the protein surface and the 2FeH . In this study, we aimed to block an O2 diffusion pathway and shield 4FeH instead. Molecular dynamics (MD) simulations identified a novel water channel (WH ) surrounding the H-cluster. As this hydrophilic path may be accessible for O2 molecules we applied site-directed mutagenesis targeting amino acids along WH in proximity to 4FeH to block O2 diffusion. Protein film electrochemistry experiments demonstrate increased O2 stabilities for variants G302S and S357T, and MD simulations based on high-resolution crystal structures confirmed an enhanced local sieving effect for O2 in the environment of the 4FeH in both cases. The results strongly suggest that, in wild type proteins, O2 diffuses from the 4FeH to the 2FeH . These results reveal new strategies for improving the O2 stability of [FeFe]-hydrogenases by focusing on the O2 diffusion network near the active site.

Electroplated Electrodes for Continuous and Mass-Efficient Electrochemical Hydrogenation.

Electrocatalytic hydrogenations (ECH) enable the reduction of organic substrates upon usage of electric current and present a sustainable alternative to conventional processes if green electricity is used. Opposed to most current protocols for electrode preparation, this work presents a one-step binder- and additive-free production of silver- and copper-electroplated electrodes. Controlled adjustment of the preparation parameters allows for the tuning of catalyst morphology and its electrochemical properties. Upon optimization of the deposition protocol and carbon support, high faradaic efficiencies of 93 % for the ECH of the Vitamin A- and E-synthon 2-methyl-3-butyn-2-ol (MBY) are achieved that can be maintained at current densities of 240 mA cm-2 and minimal catalyst loadings of 0.2 mg cm-2, corresponding to an unmatched production rate of 1.47 kgMBE gcat -1 h-1. For a continuous hydrogenation process, the protocol can be directly transferred into a single-pass operation mode giving a production rate of 1.38 kgMBE gcat -1 h-1. Subsequently, the substrate spectrum was extended to a total of 17 different C-C-, C-O- and N-O-unsaturated compounds revealing the general applicability of the reported process. Our results lay an important groundwork for the development of electrochemical reactors and electrodes able to directly compete with the palladium-based thermocatalytic state of the art.

A CuICoII cryptate for the visible light-driven reduction of CO2.

Among the rare bimetallic complexes known for the reduction of CO2, CoIICoII and ZnIICoII hexamine cryptates are described as efficient photocatalysts. In close relation to the active sites of natural, CO2-reducing enzymes, we recently reported the asymmetric cryptand {NSNN}m ({NSNN}m = N[(CH2)2SCH2(m-C6H4)CH2NH(CH2)2]3N) comprising distinct sulphur- and nitrogen-rich binding sites and the corresponding CuIMII (MII = CoII, NiII, CuII) complexes. To gain insight into the effect of metals in different oxidation states and sulphur-incorporation on the photocatalytic activity, we herein investigate the CuICoII complex of {NSNN}m as catalyst for the visible light-driven reduction of CO2. After 24 h irradiation with LED light of 450 nm, CuICoII-{NSNN}m shows a high efficiency for the photocatalytic CO2-to-CO conversion with 9.22 µmol corresponding to a turnover number of 2305 and a high selectivity of 98% over the competing H2 production despite working in an acetonitrile/water (4 : 1) mixture. Experiments with mononuclear counterparts and computational studies show that the high activity can be attributed to synergistic catalysis between Cu and Co. Furthermore, it was shown that an increase of the metal distance results in the loss of synergistic effects and rather single-sited Co catalysis is observed.

Mechanochemical one-pot synthesis of heterostructured pentlandite-carbon composites for the hydrogen evolution reaction.

We have utilized carbon sources as milling additives to enable a direct mechanochemical one-pot synthesis of Fe3Co3Ni3S8/carbon (Pn/C) materials using elemental reaction mixtures. The obtained Pn/C materials are thoroughly characterized and their carbon content could be adjusted up to 50 wt%. In addition to carbon black (CB) as an additive, Pn/C materials were produced using graphite, reduced graphene oxide (rGO), and carbon nanotubes (CNTs), which allows the overall physicochemical properties of materials for energy storage applications to be adjusted. By employing the Pn/C materials as electrocatalysts for the HER in a zero-gap proton exchange membrane (PEM) electrolyzer, we were able to reach a current density of 1 A cm-2 at a cell potential as low as 2.12 V using Pn, which was synthesized with 25 wt% CB. Furthermore, electrolysis at an applied current density of 1 A cm-2 for 100 h displays a stable performance, thus providing a sustainable synthesis procedure for potential future energy storage applications. Herein, we show that catalyst supports play an important role in the overall performance.

Adapting Synthetic Models of Heme/Cu Sites to Energy-Efficient Electrocatalytic Oxygen Reduction Reaction.

In nature, cytochrome c oxidases catalyze the 4e- oxygen reduction reaction (ORR) at the heme/Cu site, in which CuI is used to assist O2 activation. Because of the thermodynamic barrier to generate CuI , synthetic Fe-porphyrin/Cu complexes usually show moderate electrocatalytic ORR activity. We herein report on a Co-corrole/Co complex 1-Co for energy-efficient electrocatalytic ORR. By hanging a CoII ion over Co corrole, 1-Co realizes electrocatalytic 4e- ORR with a half-wave potential of 0.89 V versus RHE, which is outstanding among corrole-based electrocatalysts. Notably, 1-Co outperforms Co corrole hanged with CuII or ZnII . We revealed that the hanging CoII ion can provide an electron to improve O2 binding thermodynamically and dynamically, a function represented by the biological CuI ion of the heme/Cu site. This work is significant to present a remarkable ORR electrocatalyst and to show the vital role of a second-sphere redox-active metal ion in promoting O2 binding and activation.

Insights into the Molecular Mechanism of Formaldehyde Inhibition of [FeFe]-Hydrogenases.

[FeFe]-hydrogenases are efficient H2 converting biocatalysts that are inhibited by formaldehyde (HCHO). The molecular mechanism of this inhibition has so far not been experimentally solved. Here, we obtained high-resolution crystal structures of the HCHO-treated [FeFe]-hydrogenase CpI from Clostridium pasteurianum, showing HCHO reacts with the secondary amine base of the catalytic cofactor and the cysteine C299 of the proton transfer pathway which both are very important for catalytic turnover. Kinetic assays via protein film electrochemistry show the CpI variant C299D is significantly less inhibited by HCHO, corroborating the structural results. By combining our data from protein crystallography, site-directed mutagenesis and protein film electrochemistry, a reaction mechanism involving the cofactor's amine base, the thiol group of C299 and HCHO can be deduced. In addition to the specific case of [FeFe]-hydrogenases, our study provides additional insights into the reactions between HCHO and protein molecules.

Developing electrochemical hydrogenation towards industrial application.

Electrochemical hydrogenation reactions gained significant attention as a sustainable and efficient alternative to conventional thermocatalytic hydrogenations. This tutorial review provides a comprehensive overview of the basic principles, the practical application, and recent advances of electrochemical hydrogenation reactions, with a particular emphasis on the translation of these reactions from lab-scale to industrial applications. Giving an overview on the vast amount of conceivable organic substrates and tested catalysts, we highlight the challenges associated with upscaling electrochemical hydrogenations, such as mass transfer limitations and reactor design. Strategies and techniques for addressing these challenges are discussed, including the development of novel catalysts and the implementation of scalable and innovative cell concepts. We furthermore present an outlook on current challenges, future prospects, and research directions for achieving widespread industrial implementation of electrochemical hydrogenation reactions. This work aims to provide beginners as well as experienced electrochemists with a starting point into the potential future transformation of electrochemical hydrogenations from a laboratory curiosity to a viable technology for sustainable chemical synthesis on an industrial scale.

Ligand Control of Dinitrosyl Iron Complexes for Selective Superoxide-Mediated Nitric Oxide Monooxygenation and Superoxide-Dioxygen Interconversion.

Through nitrosylation of [Fe-S] proteins, or the chelatable iron pool, a dinitrosyl iron unit (DNIU) [Fe(NO)2] embedded in the form of low-molecular-weight/protein-bound dinitrosyl iron complexes (DNICs) was discovered as a metallocofactor assembled under inflammatory conditions with elevated levels of nitric oxide (NO) and superoxide (O2-). In an attempt to gain biomimetic insights into the unexplored transformations of the DNIU under inflammation, we investigated the reactivity toward O2- by a series of DNICs [(NO)2Fe(µ-MePyr)2Fe(NO)2] (1) and [(NO)2Fe(µ-SEt)2Fe(NO)2] (3). During the superoxide-induced conversion of DNIC 1 into DNIC [(K-18-crown-6-ether)2(NO2)][Fe(µ-MePyr)4(µ-O)2(Fe(NO)2)4] (2-K-crown) and a [Fe3+(MePyr)x(NO2)y(O)z]n adduct, stoichiometric NO monooxygenation yielding NO2- occurs without the transient formation of peroxynitrite-derived •OH/•NO2 species. To study the isoelectronic reaction of O2(g) and one-electron-reduced DNIC 1, a DNIC featuring an electronically localized {Fe(NO)2}9-{Fe(NO)2}10 electronic structure, [K-18-crown-6-ether][(NO)2Fe(µ-MePyr)2Fe(NO)2] (1-red), was successfully synthesized and characterized. Oxygenation of DNIC 1-red leads to the similar assembly of DNIC 2-K-crown, of which the electronic structure is best described as paramagnetic with weak antiferromagnetic coupling among the four S = 1/2 {FeIII(NO-)2}9 units and S = 5/2 Fe3+ center. In contrast to DNICs 1 and 1-red, DNICs 3 and [K-18-crown-6-ether][(NO)2Fe(µ-SEt)2Fe(NO)2] (3-red) display a reversible equilibrium of "3 + O2- ⇋ 3-red + O2(g)", which is ascribed to the covalent [Fe(µ-SEt)2Fe] core and redox-active [Fe(NO)2] unit. Based on this study, the supporting/bridging ligands in dinuclear DNIC 1/3 (or 1-red/3-red) control the selective monooxygenation of NO and redox interconversion between O2- and O2 during reaction with O2- (or O2).

Coordination Tuning of Metal Porphyrins for Improved Oxygen Evolution Reaction.

The nucleophilic attack of water or hydroxide on metal-oxo units forms an O-O bond in the oxygen evolution reaction (OER). Coordination tuning to improve this attack is intriguing but has been rarely realized. We herein report on improved OER catalysis by metal porphyrin 1-M (M=Co, Fe) with a coordinatively unsaturated metal ion. We designed and synthesized 1-M by sterically blocking one porphyrin side with a tethered tetraazacyclododecane unit. With this protection, the metal-oxo species generated in OER can maintain an unoccupied trans axial site. Importantly, 1-M displays a higher OER activity in alkaline solutions than analogues lacking such an axial protection by decreasing up to 150-mV overpotential to achieve 10 mA/cm2 current density. Theoretical studies suggest that with an unoccupied trans axial site, the metal-oxo unit becomes more positively charged and thus is more favoured for the hydroxide nucleophilic attack as compared to metal-oxo units bearing trans axial ligands.