Recyclable cross-linked laccase aggregates coupled to magnetic silica microbeads for elimination of pharmaceuticals from municipal wastewater.

In the present work, the use of magnetic mesoporous silica microbeads (MMSMB) as supports was proposed to produce magnetically-separable cross-linked enzyme aggregates (MCLEAs). The effects of cross linking time, addition of bovine serum albumin as protein feeder, pH, glutaraldehyde concentration, and laccase:MMSMB mass ratio on the immobilization yield and enzyme load were investigated. The best conditions allowed the rapid preparation of MCLEAs with high enzyme load, i.e., 1.53 U laccase/mg MCLEAs. The stability of MCLEAs was improved with regard to low pH, presence of chemical denaturants, and real wastewater matrix, compared to free laccase. In addition, the novel biocatalyst exhibited good operational stability, maintaining up to 70 % of its initial activity after 10 successive batch reactions. Finally, MCLEAs demonstrated its catalytic potential to transform acetaminophen and various non-phenolic pharmaceutical active compounds as mefenamic acid, fenofibrate, and indomethacin from biologically treated wastewater effluent, with similar or even higher efficiency than free laccase.

Assessing the use of nanoimmobilized laccases to remove micropollutants from wastewater.

Enzymes immobilization is a useful way to allow enzyme reuse and increase their stability. A high redox potential laccase from Trametes versicolor (TvL) and a low redox potential, but commercially available low-cost laccase from Myceliophthora thermophila (MtL), were successfully immobilized and co-immobilized onto fumed silica nanoparticles (fsNP). Enzyme loads of 1.78 ± 0.07, 0.69 ± 0.03, and 1.10 ± 0.01 U/mg fsNP were attained for the optimal doses of TvL, MtL, and co-immobilized laccases, respectively. In general, the laccase-fsNP conjugates showed a higher resistance against an acidic pH value (i.e., pH 3), and a higher storage stability than free enzymes. In addition, immobilized enzymes exhibited a superior long-term stability than free laccases when incubated in a secondary effluent from a municipal wastewater treatment plant (WWTP). For instance, the residual activity after 2 weeks for the co-immobilized laccases and the mixture of free laccases were 40.2 ± 2.5% and 16.8 ± 1.0%, respectively. The ability of the laccase-fsNP to remove a mixture of (14)C-bisphenol A (BPA) and (14)C-sodium diclofenac (DCF) from spiked secondary effluents was assessed in batch experiments. The catalytic efficiency was highly dependent on both the microbial source and state of the biocatalyst. The high redox potential TvL in free form attained a four-fold higher percentage of BPA transformation than the free MtL. Compared to free laccases, immobilized enzymes led to much slower rates of BPA transformation. For instance, after 24 h, the percentages of BPA transformation by 1000 U/L of a mixture of free laccases or co-immobilized enzymes were 67.8 ± 5.2 and 27.0 ± 3.9%, respectively. Nevertheless, the use of 8000 U/L of co-immobilized laccase led to a nearly complete removal of BPA, despite the unfavorable conditions for laccase catalysis (pH ~ 8.4). DCF transformation was not observed for any of the enzymatic systems, showing that this compound is highly recalcitrant toward laccase oxidation under realistic conditions.

Enzymatic technologies for remediation of hydrophobic organic pollutants in soil.

Worldwide there are numerous contaminated sites as a result of the widespread production and use of chemicals in industrial and military activities as well as poor schemes of waste disposal and accidental spillages. The implementation of strategies for decontamination and restoration of polluted sites has become a priority, being bioremediation with biological agents a promising alternative. Enzyme-based technologies offer several advantages over the use of microbial cells, provided that the biocatalyst meets specific requirements: efficiency to remove the target pollutant/s, non-dependency on expensive coenzymes or cofactors, enzyme stability, and an affordable production system. In this mini-review, the direct application of enzymes for in situ soil bioremediation is explored, and also novel ex situ enzymatic technologies are presented. This new perspective provides a valuable insight into the different enzymatic alternatives for decontamination of soils. Examples of recent applications are reported, including pilot-scale treatments and patented technologies, and the principles of operation and the main requirements associated are described. Furthermore, the main challenges regarding the applicability of enzymatic technologies for remediation of hydrophobic organic pollutants from soil are discussed.

Potentiality of a ceramic membrane reactor for the laccase-catalyzed removal of bisphenol A from secondary effluents.

In this study, the removal of bisphenol A (BPA) by laccase in a continuous enzymatic membrane reactor (EMR) was investigated. The effects of key parameters, namely, type of laccase, pH, and enzyme activity, were initially evaluated. Once optimal conditions were determined, the continuous removal of the pollutant in an EMR was assessed in synthetic and real biologically treated wastewaters. The reactor configuration consisted of a stirred tank reactor coupled to a ceramic membrane, which prevented the sorption of the pollutant and allowed the recovery and recycling of laccase. Nearly complete removal of BPA was attained under both operation regimes with removal yields above 94.5 %. In experiments with real wastewater, the removal of BPA remained high while the presence of colloids and certain ions and the formation of precipitates on the membrane potentially affected enzyme stability and made necessary the periodic addition of laccase. Polymerization and degradation were observed as probable mechanisms of BPA transformation by laccase.

Continuous removal of nonylphenol by versatile peroxidase in a two-stage membrane bioreactor.

The ligninolytic enzymes versatile peroxidase (VP) and manganese peroxidase (MnP) have been previously described as efficient oxidizers of the endocrine disrupting chemical (EDC) nonylphenol at high concentrations of the pollutant. Envisaging the application of an enzymatic technology as a tertiary treatment in wastewater treatment plants, it is important to design a continuous reactor that performs the efficient removal of nonylphenol under environmental conditions. In the present research, a two-stage membrane bioreactor based on the production and use of Mn(3+)-malonate (chemical oxidant) was applied. The bioreactor consisted of an enzymatic reactor (R1) for the production of Mn(3+)-malonate by VP, coupled to an oxidation reactor (R2), where the oxidation of nonylphenol by Mn(3+)-malonate took place. The production of Mn(3+)-malonate in R1 was maintained constant: 500-700 µM with minimal deactivation of the enzyme. The oxidation reactor attained nearly complete removal of nonylphenol, even at a hydraulic retention time (HRT) shorter than 20 min. The operation with real wastewater containing nonylphenol at environmental concentrations (454 nM) was also successful, with a nonylphenol removal of 99.5% at a rate of 0.73 µM h(-1). Moreover, when the HRT of R2 was sharply reduced to 6.8 and 3.6 min, the removal of nonylphenol was maintained beyond 99%, which proves the feasibility of the system to remove the target compound present in a real effluent, even at very short HRTs.