RESUMEN
Understanding the electrochemical reactions at the interface between a Si anode and a solid sulfide electrolyte is essential in improving the cycle stabilities of Si anodes in all-solid-state batteries (ASSBs). Highly dense Si films with very low roughnesses of <1 nm were fabricated at room temperature via cathodic arc plasma deposition, which led to the formation of a Si/sulfide electrolyte model interface. Li (de)alloying through the model interface hardly occurred during the first cycle, whereas it proceeded stably in subsequent cycles. Hard X-ray photoelectron spectroscopy and neutron reflectometry directly revealed that the reduction or oxidation of the interfacial component or Li3PS4 electrolyte occurred during the first cycle. Consequently, an interfacial layer with a thickness of 13 nm and primarily composed of Li2S, SiS2, and P2S5 glasses was formed during the first cycle. The interfacial layer acted as a Li-conductive, electron-insulating solid electrolyte interphase (SEI) that provided reversible (de)lithiation. Our model interface directly demonstrates the electrochemical reaction processes at the Si/Li3PS4 interface and provides insights into the structures and electrochemical properties of SEIs to activate the (de)lithiation of Si anodes using a sulfide electrolyte.
RESUMEN
OBJECTIVE: To identify the prognostic value of physical activity-related factors as well as known vascular risk factors for vascular events in mild ischemic stroke (MIS). DESIGN: Single-center prospective cohort study. SETTING: University hospital. PARTICIPANTS: Consecutive patients (N=255) (175 men, median age 70.0y) with acute ischemic stroke and transient ischemic attack (TIA) with modified Rankin scale scores ranging from 0 to 2 were enrolled in this study. INTERVENTIONS: Not applicable. MAIN OUTCOME MEASURES: Enrolled patients were followed up for composite vascular events as primary outcomes up to 3 years postdischarge. Primary outcomes included stroke and cardiovascular death, hospitalization due to stroke or TIA recurrence, cardiovascular disease, and peripheral artery disease. During hospitalization, known vascular risk factors such as previous history of vascular events, stroke subtype, white matter lesions, and ankle-brachial index were assessed. Moreover, at the time of discharge, physical activity-related factors such as maximum walking speed (MWS), handgrip strength, knee extensor isometric muscle strength, anxiety, and depression were assessed as potential predictors. RESULTS: The Kaplan-Meier estimates of cumulative risk of composite vascular events at 1, 2, and 3 years were 9.6%, 14.4%, and 15.2%, respectively. After multivariate analysis, cerebral white matter lesions of periventricular hyperintensity (PVH) (grade=3; hazard ratio: 2.904; 95% confidence interval: 1.160 to 7.266; P=.023) and MWS (<1.45m/s; hazard ratio: 2.232; 95% confidence interval: 1.010 to 4.933; P=.047) were identified as significant independent predictors of composite vascular events. CONCLUSIONS: The results of this study indicate that MWS could be an independent prognostic factor for composite vascular events in MIS.
Asunto(s)
Ataque Isquémico Transitorio/fisiopatología , Alta del Paciente/estadística & datos numéricos , Accidente Cerebrovascular/fisiopatología , Enfermedades Vasculares/epidemiología , Velocidad al Caminar , Factores de Edad , Anciano , Anciano de 80 o más Años , Índice Tobillo Braquial , Ansiedad/epidemiología , Índice de Masa Corporal , Comorbilidad , Depresión/epidemiología , Femenino , Estudios de Seguimiento , Fuerza de la Mano , Conductas Relacionadas con la Salud , Humanos , Estimación de Kaplan-Meier , Masculino , Persona de Mediana Edad , Fuerza Muscular , Pronóstico , Modelos de Riesgos Proporcionales , Estudios Prospectivos , Factores de Riesgo , Factores Sexuales , Accidente Cerebrovascular/clasificaciónRESUMEN
This paper reports a 3-axis fully integrated differential capacitive tactile sensor surface-mountable on a bus line. The sensor integrates a flip-bonded complementary metal-oxide semiconductor (CMOS) with capacitive sensing circuits on a low temperature cofired ceramic (LTCC) interposer with Au through vias by Au-Au thermo-compression bonding. The CMOS circuit and bonding pads on the sensor backside were electrically connected through Au bumps and the LTCC interposer, and the differential capacitive gap was formed by an Au sealing frame. A diaphragm for sensing 3-axis force was formed in the CMOS substrate. The dimensions of the completed sensor are 2.5 mm in width, 2.5 mm in length, and 0.66 mm in thickness. The fabricated sensor output coded 3-axis capacitive sensing data according to applied 3-axis force by three-dimensional (3D)-printed pins. The measured sensitivity was as high as over 34 Count/mN for normal force and 14 to 15 Count/mN for shear force with small noise, which corresponds to less than 1 mN. The hysteresis and the average cross-sensitivity were also found to be less than 2% full scale and 11%, respectively.