A supramolecular host matrix for preserving fluorescence in the solid-state.

Fluorescent materials find numerous applications in light-based devices, but their utilization is severely affected by concentration caused quenching of fluorescence, the extreme form of which is the total loss of fluorescence in the solid state. Introduction of bulky substituents remains the most frequently applied fluorescence revival strategy, but requires multi-step synthetic modifications. We have demonstrated a simple one step supramolecular gel-based strategy to preserve the fluorescence in the solid state.

Aggregation-induced generation of circularly polarized luminescence in naphthaleneimide-based nanostructures with high dissymmetry factor.

Extensive efforts have been dedicated towards designing new organic materials that display solid-state fluorescence and possess optical activity, thereby leading to the fabrication of materials emitting circularly polarized light. Existing organic materials usually suffer from two limitations, a low dissymmetry factor (glum) and weak or no fluorescence in the solid state. Herein, we have demonstrated a naphthalene imide-based dyad system that remains fluorescent even in powder form and displays circularly polarized luminescence in its aggregated and solid state with significantly high glum values.

Two- and Three-Spin Hybrid Inorganic-Organic [2]Rotaxanes Containing Metallated Salen Groups.

Mono- and bis-salen functionalised [2]rotaxanes have been synthesised from the esterification of [2]rotaxanes containing phenol-terminated threads (salen = N,N'-bis(salicylidene)ethylenediamine). The [2]rotaxanes have general formula [RH][Cr7NiF8(O2CtBu)16], where [RH]+ is a thread with a central secondary ammonium site that templates a [Cr7NiF8(O2CtBu)16]- ring. The threads are terminated at one or both ends by carboxylic acid functionalised salen groups. The {M(salen)} groups can be free-base [M = (H+)2] or metallated [M = Cu2+, Ni2+, (VO)2+]. The [2]rotaxanes have been characterised by single crystal XRD and solid- and solution-state EPR spectroscopy. Where two paramagnetic M ions are involved [M = Cu2+ and/or (VO)2+] the [2]rotaxanes contain three electron spin S = ½ centres, since the {Cr7Ni} ring has an S = ½ ground state which is well isolated at low temperatures. These three-spin [2]rotaxanes have been characterised in solution by pulsed dipolar EPR spectroscopies (DEER, also known as PELDOR, and RIDME). The M···M and M···{Cr7Ni} interactions measured are consistent with dipolar interactions and also with the distances from single crystal XRD.

A supramolecular assembly-based strategy towards the generation and amplification of photon up-conversion and circularly polarized luminescence.

For the molecular properties in which energy transfer/migration is determinantal, such as triplet-triplet annihilation-based photon up-conversion (TTAUC), the overall performance is largely affected by the intermolecular distance and relative molecular orientations. In such scenarios, tools that may steer the intermolecular interactions and provide control over molecular organisation in the bulk, become most valuable. Often these non-covalent interactions, found predominantly in supramolecular assemblies, enable pre-programming of the molecular network in the assembled structures. In other words, by employing supramolecular chemistry principles, an arrangement where molecular units are arranged in a desired fashion, very much like a Lego toy, could be achieved. This leads to enhanced energy transfer from one molecule to other. In recent past, chiral luminescent systems have attracted huge attention for producing circularly polarized luminescence (CPL). In such systems, chirality is a necessary requirement. Chirality induction/transfer through supramolecular interactions has been known for a long time. It was realized recently that it may help in the generation and amplification of CPL signals as well. In this review article we have discussed the applicability of self-/co-assembly processes for achieving maximum TTA-UC and CPL in various molecular systems.

A ring of rotaxanes: studies of a large paramagnetic assembly in solution.

Here we report the synthesis and structural characterization of four [7]rotaxanes formed by coordinating hybrid inorganic-organic [2]rotaxanes to a central {Ni12} core. X-ray single crystal diffraction demonstrate that [7]rotaxanes are formed, with a range of conformations in the crystal. Small angle X-ray scattering supported by molecular dynamic simulations demonstrates that the large molecules are stable in solution and also show that the conformers present in solution are not those found in the crystal. Pulsed EPR spectroscopy show that phase memory times for the {Cr7Ni} rings, which have been proposed as qubits, are reduced but not dramatically by the presence of the {Ni12} cage.

Control and Transferability of Magnetic Interactions in Supramolecular Structures: Trimers of {Cr7 Ni} Antiferromagnetic Rings.

A synthetic strategy is demonstrated to prepare two distinct trimers of antiferromagnetically coupled {Cr7 Ni} rings, substantially varying the magnetic interactions between the spin centres. The interactions were studied using multi-frequency cw EPR: in a trimer linked via non-covalent H-bonding interactions no measurable interaction between rings was seen, while in a trimer linked via iso-nicotinate groups isotropic and anisotropic exchange interactions of +0.42 and -0.8 GHz, respectively, were observed. The latter are the same as those for a simpler hetero-dimer system, showing how the spin-spin interactions can be built in a predictable and modular manner in these systems.

A folded π-system with supramolecularly oriented dipoles: single-component piezoelectric relaxor with NLO activity.

Organic molecules with an active dipole moment have a natural propensity to align in an antiparallel fashion in the solid state, resulting in zero macroscopic polarization. This primary limitation makes the material unresponsive to switching with electric fields, mechanical forces, and to intense laser light. A single-component organic material that bestows macroscopic dipole-driven electro-mechanical and optical functions, e.g., piezoelectric, ferroelectric and nonlinear optical (NLO) activity, is unprecedented due to the design challenges imparted by crystal symmetry and dipole orientations. Herein we report a crystalline organic material that self-assembles with a polar order (P 1), and is endowed with a high piezoelectric coefficient (d 33-47 pm V-1), as well as ferroelectric and Debye-type relaxor properties. In addition, it shows second harmonic generation (SHG) activity, which is more than five times that of the benchmark potassium dihydrogen phosphate. Piezoelectric force microscopy (PFM) images validated electro-mechanical deformations. Piezoresponse force spectroscopy (PFS) studies confirmed a signature butterfly-like amplitude and a phase loop. To the best of our knowledge, this is the first report of a folded supramolecular π-system that manifests unidirectionally oriented dipoles and exhibits piezoelectricity, ferroelectricity, and has excellent ability to generate second harmonic light. These findings can herald new design possibilities based on folded architectures to explore opto-, electro- and mechano-responsive multifaceted functions.

Modelling Conformational Flexibility in a Spectrally Addressable Molecular Multi-Qubit Model System.

Dipolar coupled multi-spin systems have the potential to be used as molecular qubits. Herein we report the synthesis of a molecular multi-qubit model system with three individually addressable, weakly interacting, spin 1 / 2 ${{ 1/2 }}$ centres of differing g-values. We use pulsed Electron Paramagnetic Resonance (EPR) techniques to characterise and separately address the individual electron spin qubits; CuII , Cr7 Ni ring and a nitroxide, to determine the strength of the inter-qubit dipolar interaction. Orientation selective Relaxation-Induced Dipolar Modulation Enhancement (os-RIDME) detecting across the CuII spectrum revealed a strongly correlated CuII -Cr7 Ni ring relationship; detecting on the nitroxide resonance measured both the nitroxide and CuII or nitroxide and Cr7 Ni ring correlations, with switchability of the interaction based on differing relaxation dynamics, indicating a handle for implementing EPR-based quantum information processing (QIP) algorithms.

Decorating polymer beads with 1014 inorganic-organic [2]rotaxanes as shown by spin counting.

Polymer beads have been used as the core of magnetic particles for around twenty years. Here we report studies to attach polymetallic complexes to polymer beads for the first time, producing beads of around 115 microns diameter that are attached to 1014 hybrid inorganic-organic [2]rotaxanes. The bead is then formally a [1014] rotaxane. The number of complexes attached is counted by EPR spectroscopy after including TEMPO radicals within the thread of the hybrid [2]rotaxanes.

Gold(i) bridged dimeric and trimeric heterometallic {Cr7Ni}-based qubit systems and their characterization.

Gold(i) bridged dimeric and trimeric structures of a ground state spin S = 1/2 heterometallic {Cr7Ni} wheel have been prepared and studied by continuous wave (CW) and pulsed wave EPR spectrometry. The {Cr7Ni} relaxation time constants (T1 and Tm) show rates matching well with previous observations. Four pulse Double Electron Resonance (DEER) studies suggest presence of more than one conformations. Small Angle X-ray Scattering (SAXS) in conjunction with Molecular Dynamic (MD) Simulations were performed to look at the possible conformations in solution. In line with DEER results, simulation data further indicated more flexible molecular geometry in solution than the one in solid state.

A [13]rotaxane assembled via a palladium molecular capsule.

Molecules that are the size of small proteins are difficult to make. The most frequently examined route is via self-assembly, and one particular approach involves molecular nanocapsules, where ligands are designed that will enforce the formation of specific polyhedra of metals within the core of the structure. Here we show that this approach can be combined with mechanically interlocking molecules to produce nanocapsules that are decorated on their exterior. This could be a general route to very large molecules, and is exemplified here by the synthesis and structural characterization of a [13]rotaxane, containing 150 metal centres. Small angle X-ray scattering combined with atomistic molecular dynamics simulations demonstrate the compound is intact in solution.

Formation of an interlocked double-chain from an organic-inorganic [2]rotaxane.

Here we show that a structure containing a polymeric interlocking daisy chain is obtained from the reaction of an inorganic-organic [2]rotaxane [HB{CrIII7NiII(µ-F)8(O2CtBu)16}], where B is an organic thread terminated with a bi-pyridyl unit, with an oxo-centered metal carboxylate triangle [FeIII2CoII(µ3-O)(O2CtBu)6(HO2CtBu)3].

Appending Diverse π-Extended Acceptors with Tetrathiafulvalene/Dithiafulvalene Donors: Multistate Redox Properties, Radical Ion Generation, and Mid-IR-Absorbing Mixed-Valence States.

Three classes of donor-acceptor (D-A) π-extended chromophores (1-12) were synthesized through a phosphite-mediated cross-coupling reaction, in which the anhydride- or imide-based π-As and number of tetrathiafulvalene (TTF)/dithiafulvalene (DTF) Ds were systematically changed. Large π rings, such as benzoperylene and coronene, were integrated into the TTF/DTF unit, for the first time, to overcome their high insolubility. The anhydride and imide groups in the π acceptors can significantly alter the frontier orbitals and influence the optoelectronic properties. The D moieties allow the formation of radical cations (D.+ ) and the π-extended A moieties aid the formation of radical anions (A.- ) by oxidation/reduction under ambient conditions. The molecules revealed UV/Vis/near-IR absorption, fluorescence extending into the near-IR region, and amphoteric electrochemical properties. Chromophores 10 and 12 show solvatochromism in a wide range of solvents. The π-As with anhydride functionality allow easier electron uptake, relative to the imide groups, whereas the increasing number of D TTF/DTF units make them easy to oxidize. Interestingly, the trans-TTF-fused molecules (1, 6, and 11) exhibited a mixed-valence state in the mid-IR region (ν˜ =5130-4000 cm-1 ). Moderate electron coupling between the redox centers is inferred to the compounds being of Robin-Day class II. The multistate redox activity along with panchromism and near-/mid-IR optical absorption of these systems can be attractive towards advanced switchable materials.

All-or-none switching of photon upconversion in self-assembled organogel systems.

Aggregation-induced photon upconversion (iPUC) based on a triplet-triplet annihilation (TTA) process is successfully developed via controlled self-assembly of donor-acceptor pairs in organogel nanoassemblies. Although segregation of donor from acceptor assemblies has been an outstanding problem in TTA-based UC and iPUC, we resolved this issue by modifying both the triplet donor and aggregation induced emission (AIE)-type acceptor with glutamate-based self-assembling moieties. These donors and acceptors co-assemble to form organogels without segregation. Interestingly, these donor-acceptor binary gels show upconversion at room temperature but the upconversion phenomena were lost upon dissolution of the gels on heating. The observed changes in TTA-UC emission were thermally reversible, reflecting the controlled assembly/disassembly of the binary molecular systems. The observed on/off ratio of UC emission was much higher than that of the aggregation-induced fluorescence of the acceptor, which highlights the important role of iPUC, i.e., multi-exciton TTA for photoluminescence switching. This work bridges iPUC and supramolecular chemistry and provides a new strategy for designing stimuli-responsive upconversion systems.

Assorted morphosynthesis: access to multi-faceted nano-architectures from a super-responsive dual π-functional amphiphilic construct.

An electronically segmented amphiphile was created by conjugating two π-functional units hydroxyquinoline and naphthalenediimide (HQ/NDI) for the first time. The differential electrostatic potential of the π-surfaces, H-bonding units, etc. trigger a manifold response and direct the assembly of a unique collection of seven diverse nano-architectures. Chiral assembly, distinct classes of fibers, 3-D sheets, and metallo-spheres/fibrils with µM levels of Co/Cu/Zn(ii) ions emerged from this new approach of assorted morphosynthesis under ambient conditions.

Single electron transfer-driven multi-dimensional signal read-out function of TCNQ as an "off-the-shelf" detector for cyanide.

Herein we report the first applications of TCNQ as a rapid and highly sensitive off-the-shelf cyanide detector. As a proof-of-concept, we have applied a kinetically selective single-electron transfer (SET) from cyanide to deep-lying LUMO orbitals of TCNQ to generate a persistently stable radical anion (TCNQ(•-)), under ambient condition. In contrast to the known cyanide sensors that operate with limited signal outputs, TCNQ(•-) offers a unique multiple signaling platform. The signal readability is facilitated through multichannel absorption in the UV-vis-NIR region and scattering-based spectroscopic methods like Raman spectroscopy and hyper Rayleigh scattering techniques. Particularly notable is the application of the intense 840 nm NIR absorption band to detect cyanide. This can be useful for avoiding background interference in the UV-vis region predominant in biological samples. We also demonstrate the fabrication of a practical electronic device with TCNQ as a detector. The device generates multiorder enhancement in current with cyanide because of the formation of the conductive TCNQ(•-).

Urea-based constructs readily amplify and attenuate nonlinear optical activity in response to H-bonding and anion recognition.

Urea-based molecular constructs are shown for the first time to be nonlinear optically (NLO) active in solution. We demonstrate self-assembly triggered large amplification and specific anion recognition driven attenuation of the NLO activity. This orthogonal modulation along with an excellent nonlinearity-transparency trade-off makes them attractive NLO probes for studies related to weak self-assembly and anion transportation by second harmonic microscopy.

Core-modified naphthalenediimides generate persistent radical anion and cation: new panchromatic NIR probes.

The generation of the first persistent radical cation of naphthalenediimide with Cu(2+)/Fe(3+) under ambient conditions is reported. An alternate anionic trigger generates a persistent radical anion within the same motif. Steric protection and H-bonding enhances the half-life of radical cation by 290-fold. The radical anion and cation have orthogonal spin density, panchromatic and NIR optical bands, which can be applied as attractive multichannel probes.

NTCDA-TTF first axial fusion: emergent panchromatic, NIR optical, multi-state redox and high optical contrast photooxidation.

The first synthetic entry into axially fused NTCDA/PMDA-TTF multipolar molecules demonstrates a high optical contrast photooxidation, panchromism, low HOMO-LUMO gap, generation of a stable radical cation, NIR absorption/emission beyond 2150/800 nm and theoretically calculated NLO activity.

Assemblies of perylene diimide derivatives with melamine into luminescent hydrogels.

We report unique and spontaneous formation of hydrogels of perylene derivatives with melamine. The luminescent gel network is formed by H-type aggregation of the perylene core, supramolecularly cross-linked by melamine units. As a result of controlled aggregation in the extended nanofibers, strong exciton fluorescence emission is observed.