Spin-Dependent ππ

We present a detailed analysis of the electronic properties of graphene/Eu/Ni(111). By using angle- and spin-resolved photoemission spectroscopy and ab initio calculations, we show that the intercalation of Eu in the graphene/Ni(111) interface gives rise to a gapped freestanding dispersion of the ππ^{*} Dirac cones at the K[over ¯] point with an additional lifting of the spin degeneracy due to the mixing of graphene and Eu states. The interaction with the magnetic substrate results in a large spin-dependent gap in the Dirac cones with a topological nature characterized by a large Berry curvature and a spin-polarized Van Hove singularity, whose closeness to the Fermi level gives rise to a polaronic band.

Interface-driven formation of a two-dimensional dodecagonal fullerene quasicrystal.

Since their discovery, quasicrystals have attracted continuous research interest due to their unique structural and physical properties. Recently, it was demonstrated that dodecagonal quasicrystals could be used as bandgap materials in next-generation photonic devices. However, a full understanding of the formation mechanism of quasicrystals is necessary to control their physical properties. Here we report the formation of a two-dimensional dodecagonal fullerene quasicrystal on a Pt3Ti(111) surface, which can be described in terms of a square-triangle tiling. Employing density functional theory calculations, we identify the complex adsorption energy landscape of the Pt-terminated Pt3Ti surface that is responsible for the quasicrystal formation. We demonstrate the presence of quasicrystal-specific phason strain, which provides the degree of freedom required to accommodate the quasicrystalline structure on the periodic substrate. Our results reveal detailed insight into an interface-driven formation mechanism and open the way to the creation of tailored fullerene quasicrystals with specific physical properties.

Tuning the surface electronic structure of a Pt3Ti(111) electro catalyst.

Increasing the efficiency and stability of bimetallic electro catalysts is particularly important for future clean energy technologies. However, the relationship between the surface termination of these alloys and their catalytic activity is poorly understood. Therefore, we report on fundamental UHV-SPM, LEED, and DFT calculations of the Pt3Ti(111) single crystal surface. Using voltage dependent imaging the surface termination of Pt3Ti(111) was studied with atomic resolution. Combining these images with simulated STM maps based on ab initio DFT calculations allowed us to identify the three upper layers of the Pt3Ti(111) single crystal and their influence upon the surface electronic structure. Our results show that small changes in the composition of the second and third atomic layer are of significant influence upon the surface electronic structure of the Pt3Ti electro catalyst. Furthermore, we provide relevant insights into the dependence of the surface termination on the preparation conditions.

Oxygen orders differently under graphene: new superstructures on Ir(111).

Using scanning tunneling microscopy, the oxygen adsorbate superstructures on bare Ir(111) are identified and compared to the ones formed by intercalation in between graphene and the Ir(111) substrate. For bare Ir(111) we observe O-(2 × 2) and O-(2 × 1) structures, thereby clarifying a persistent uncertainty about the existence of these structures and the role of defects for their stability. For the case of graphene-covered Ir(111), oxygen intercalation superstructures can be imaged through the graphene monolayer by choosing proper tunneling conditions. Depending on the pressure, temperature and duration of O2 exposure as well as on the graphene morphology, O-(2 × 2), O-(√3×√3)-R30°, O-(2 × 1) and O-(2√3 × 2√3)-R30° superstructures with respect to Ir(111) are observed under the graphene cover. Two of these structures, the O-(√3 × âˆš3)-R30° and the (2√3 × 2√3)-R30° structure are only observed when the graphene layer is on top. Phase coexistence and formation conditions of the intercalation structures between graphene and Ir(111) are analyzed. The experimental results are compared to density functional theory calculations including dispersive forces. The existence of these phases under graphene and their absence on bare Ir(111) are discussed in terms of possible changes in the adsorbate-substrate interaction due to the presence of the graphene cover.

Structure and dynamics in liquid bismuth and Bi(n) clusters: a density functional study.

Density functional/molecular dynamics simulations with more than 500 atoms have been performed on liquid bismuth at 573, 773, 923, and 1023 K and on neutral Bi clusters with up to 14 atoms. There are similar structural patterns (coordination numbers, bond angles, and ring patterns) in the liquid and the clusters, with significant differences from the rhombohedral crystalline form. We study the details of the structure (structure factor, pair, and cavity distribution functions) and dynamical properties (vibration frequencies, diffusion constants, power spectra), and compare with experimental results where available. While the three short covalent bonds typical to pnictogens are characteristic in both liquid and clusters, the number of large voids and the total cavity volume is much larger in the liquid at 1023 K, with larger local concentration variations. The inclusion of spin-orbit coupling results in a lowering of the cohesive energies in Bin clusters of 0.3-0.5 eV/atom.

Local tunnel magnetoresistance of an iron intercalated graphene-based heterostructure.

The lateral variation of the tunnel magnetoresistance (TMR) of a graphene-based vertical heterostructure is studied by spin-polarized scanning tunneling microscopy (SP-STM) using an Fe-coated probe tip. The well-defined heterostructure is obtained by the intercalation of a magnetic Fe monolayer at the graphene/Ir(1 1 1) interface. Its structure is characterized by a moiré pattern with a high corrugation. In contrast to the Fe / Ir(1 1 1) surface, graphene/Fe / Ir(1 1 1) exhibits ferromagnetic order with an out-of-plane easy magnetization axis. At the nanometer scale, our experiments reveal that the moiré pattern induces a lateral variation of the TMR, which reaches 80%. The measured TMR at valleys of the moiré pattern is higher than at hills. We interpret this modulation in terms of a different hybridization between graphene and Fe at valleys and hills due to a different graphene-Fe distance at these sites, which leads to a different transmission of spin-polarized states.

Spin polarization of Co(0001)/graphene junctions from first principles.

Junctions comprised of ferromagnets and nonmagnetic materials are one of the key building blocks in spintronics. With the recent breakthroughs of spin injection in ferromagnet/graphene junctions it is possible to consider spin-based applications that are not limited to magnetoresistive effects. However, for critical studies of such structures it is crucial to establish accurate predictive methods that would yield atomically resolved information on interfacial properties. By focusing on Co(0001)/graphene junctions and their electronic structure, we illustrate the inequivalence of different spin polarizations. We show atomically resolved spin polarization maps as a useful approach to assess the relevance of Co(0001)/graphene for different spintronics applications.

The mechanism of caesium intercalation of graphene.

Properties of many layered materials, including copper- and iron-based superconductors, topological insulators, graphite and epitaxial graphene, can be manipulated by the inclusion of different atomic and molecular species between the layers via a process known as intercalation. For example, intercalation in graphite can lead to superconductivity and is crucial in the working cycle of modern batteries and supercapacitors. Intercalation involves complex diffusion processes along and across the layers; however, the microscopic mechanisms and dynamics of these processes are not well understood. Here we report on a novel mechanism for intercalation and entrapment of alkali atoms under epitaxial graphene. We find that the intercalation is adjusted by the van der Waals interaction, with the dynamics governed by defects anchored to graphene wrinkles. Our findings are relevant for the future design and application of graphene-based nano-structures. Similar mechanisms can also have a role for intercalation of layered materials.

Rationale for switching to nonlocal functionals in density functional theory.

Density functional theory (DFT) has been steadily improving over the past few decades, becoming the standard tool for electronic structure calculations. The early local functionals (LDA) were eventually replaced by more accurate semilocal functionals (GGA) which are in use today. A major persisting drawback is the lack of the nonlocal correlation which is at the core of dispersive (van der Waals) forces, so that a large and important class of systems remains outside the scope of DFT. The vdW-DF correlation functional of Langreth and Lundqvist, published in 2004, was the first nonlocal functional which could be easily implemented. Beyond expectations, the nonlocal functional has brought significant improvement to systems that were believed not to be sensitive to nonlocal correlations. In this paper, we use the example of graphene nanodomes growing on the Ir(111) surface, where with an increase of the size of the graphene islands the character of the bonding changes from strong chemisorption towards almost pure physisorption. We demonstrate how the seamless character of the vdW-DF functionals makes it possible to treat all regimes self-consistently, proving to be a systematic and consistent improvement of DFT regardless of the nature of bonding. We also discuss the typical surface science example of CO adsorption on (111) surfaces of metals, which shows that the nonlocal correlation may also be crucial for strongly chemisorbed systems. We briefly discuss open questions, in particular the choice of the most appropriate exchange part of the functional. As the vdW-DF begins to appear implemented self-consistently in a number of popular DFT codes, with numerical costs close to the GGA calculations, we draw the attention of the DFT community to the advantages and benefits of the adoption of this new class of functionals.

Fine tuning of the electronic structure of π-conjugated molecules for molecular electronics.

Molecular components with their inherent scalability are expected to be promising supplements for nanoscale electronic devices. Here we report on how to specifically tune the electronic structure of chemisorbed molecules and thus to gain control of molecular transport properties. The electronic structure of our prototype π-conjugated carboxylic acid anchored on the Cu(110) surface is modified systematically by inserting nitrogen atoms in a six-membered aromatic ring, a carboxylic functional group at the aromatic ring or both. Depending on the specific nature of the substituent, the relative position of the occupied or unoccupied electronic states with respect to the Fermi level can be specifically controlled and thus the transport properties of the studied molecular systems are modified intentionally, as proven by our scanning tunneling spectroscopy measurements. On the basis of the insight gained by our systematic experiment and first-principles calculations we are also able to predict the specific molecular character (σ or π) of the orbitals involved in the transport process of a carboxylate-Cu(110) system, depending on the functionalization pattern employed.

Electronic mapping of molecular orbitals at the molecule-metal interface.

The molecule-metal interface formed by pyridine-2,5-dicarboxylic acid chemically bonded to the Cu(110) surface is investigated by scanning tunneling microscopy and first-principles calculations. Our current-voltage spectroscopy studies reveal an electronic mapping of molecular orbitals as a function of tip position. By combining experimental and theoretical investigations, individual molecular orbitals are characterized by their energy and spatial distribution. The importance of adsorption geometries and conformational changes on the electron transport properties is highlighted.

Chemical versus van der Waals Interaction: the role of the heteroatom in the flat absorption of aromatic molecules C6H6, C5NH5, and C4N2H4 on the Cu(110) surface.

We perform first-principles calculations aimed at investigating the role of a heteroatom such as N in the chemical and long-range van der Waals (vdW) interactions for a flat adsorption of several pi-conjugated molecules on the Cu(110) surface. Our study reveals that the alignment of the molecular orbitals at the adsorbate-substrate interface depends on the number of heteroatoms. As a direct consequence, the molecule-surface vdW interactions involve not only pi-like orbitals which are perpendicular to the molecular plane but also sigma-like orbitals delocalized in the molecular plane.

Controlling the magnetization direction in molecules via their oxidation state.

By means of ab initio calculations we predict that it is possible to manipulate the magnetization direction in organic magnetic molecules by changing their oxidation state. We demonstrate this novel effect on the Eu2(C8H8)3 molecule, in which the hybridization of the outer pi ring states with the Eu 4f states causes a redistribution of the orbitals around the Fermi level leading to a strong ferromagnetism due to a hole-mediated exchange mechanism. As a key result, we predict an oscillatory behavior of the easy axis of the magnetization as a function of the oxidation state of the molecule-a new effect, which could lead to new technological applications.

The interplay of structure and spin-orbit strength in the magnetism of metal-benzene sandwiches: from single molecules to infinite wires.

Based on first-principles density functional theory calculations, we explore the electronic and magnetic properties of experimentally producible sandwiches and infinite wires made of repeating benzene molecules and transition-metal atoms of V, Nb, and Ta. We describe the bonding mechanism in the molecules and in particular concentrate on the origin of magnetism in these structures. We find that all the considered systems have sizable magnetic moments and ferromagnetic spin ordering, with the single exception of the V(3)Bz(4) molecule. By including the spin-orbit coupling into our calculations we determine the easy and hard axes of the magnetic moment, the strength of the uniaxial magnetic anisotropy energy (MAE), relevant for the thermal stability of magnetic orientation, and the change of the electronic structure with respect to the direction of the magnetic moment, important for spin-transport properties. While for the V-based compounds the values of the MAE are only of the order of 0.05-0.5 meV per metal atom, increasing the spin-orbit strength by substituting V with heavier Nb and Ta allows one to achieve an increase in anisotropy values by one to two orders of magnitude. The rigid stability of magnetism in these compounds together with the strong ferromagnetic ordering makes them attractive candidates for spin-polarized transport applications. For a Nb-benzene infinite wire the occurrence of ballistic anisotropic magnetoresistance is demonstrated.