Surgical management and outcomes following atypical subtrochanteric femoral fractures - results from a matched-pair analysis of the registry for geriatric trauma of the German Trauma Society.

BACKGROUND AND OBJECTIVES: The outcomes of patients with atypical subtrochanteric fractures (ASFs) remain unclear. Data from a large international geriatric trauma registry were analysed to examine the outcome of patients with ASFs compared to patients with typical osteoporotic subtrochanteric fractures (TSFs). MATERIALS AND METHODS: Data from the Registry for Geriatric Trauma of the German Trauma Society (Deutsche Gesellschaft für Unfallchirurgie [DGU]) (ATR-DGU) were analysed. All patients treated surgically for ASFs or TSFs were included in this analysis. Across both fracture types, a paired matching approach was conducted, where statistical twins were formed based on background characteristics sex, age, American Society of Anesthesiologists (ASA) score and walking ability. In-house mortality and mortality rates at the 120-day follow-up, as well as mobility at 7 and 120 days, the reoperation rate, hospital discharge management, the hospital readmission rate at the 120-day follow-up, health-related quality of life, type of surgical treatment and anti-osteoporotic therapy at 7 and 120 days, were assessed as outcome measures using a multivariate logistic regression analysis. RESULTS: Amongst the 1,800 included patients, 1,781 had TSFs and 19 had ASFs. Logistic regression analysis revealed that patients with ASFs were more often treated with closed intramedullary nailing (RR = 3.59, p < 0.001) and had a higher probability of vitamin D supplementation as osteoporosis therapy at 120 days (RR = 0.88, p < 0.002). Patients with ASFs were also more likely to live at home after surgery (RR = 1.43, p < 0.001), and they also tended to continue living at home more often than patients with TSFs (RR = 1.33, p < 0.001). Accordingly, patients with TSFs had a higher relative risk of losing their self-sufficient living status, as indicated by increased rates of patients living at home preoperatively and being discharged to nursing homes (RR = 0.19, p < 0.001) or other hospitals (RR = 0.00, p < 0.001) postoperatively. CONCLUSIONS: Surgical treatment of ASFs was marked by more frequent use of closed intramedullary fracture reduction. Furthermore, patients with ASFs were more likely to be discharged home and died significantly less often in the given timeframe. The rate of perioperative complications, as indicated by nonsignificant reoperation rates, as well as patient walking abilities during the follow-up period, remained unaffected.

The Halofixator for the Treatment of Unstable Fractures of the Upper Cervical Spine - Our Own Experience and Narrative Review. / Der Halofixateur zur Therapie von instabilen Frakturen der oberen Halswirbelsäule ­ eigene Erfahrungen und narratives Review.

INTRODUCTION: In the treatment of upper cervical spine injuries, the semiconservative procedure of the halofixator is now of only secondary importance. Older studies from the 2000 s showed unsatisfactory rates of consolidation as well as high rates of complications. However, due to current data on therapy effectiveness, the literature is inconsistent. The aim of this work is to compare our own experiences and results of treatment with the current literature and to help to clarify the role of the halofixator. MATERIAL AND METHODS: In a monocentric retrospective cohort study, patients with unstable injuries of the axial cervical spine who were to be treated in the halofixator were investigated. Individual variables (sex, age, concomitant diseases, Charlson Comorbidity Index) and treatment characteristics (duration of treatment, consolidation status, complications) were recorded using the electronic medical record. Injuries were classified based on CT data at the time of the accident and at the end of treatment, using common classification systems, and assessed with respect to the rate of consolidation. Possible factors influencing bony consolidation as well as complications were statistically analysed. RESULTS: A total of 54 patients met the inclusion criteria. The median duration of treatment was 83 days. The most common injuries were isolated atlas fracture type III (7; 13%) and isolated dens fracture type III (24; 44%). Bony consolidation was demonstrated in 34 cases (63%) and tight pseudarthrosis in 13 cases (24%). Secondary surgical stabilisation was performed in 6 cases (11%). Isolated type III atlas fractures and type III dens fractures had very high consolidation rates of 86% and 92%, respectively. In the subgroups of patients older than 65 years or with a CCI ≥ 4, unstable pseudarthroses were found more frequently. Complications included pin infection (6%), pin dislocation (9%), and pressure ulceration from the halo vest (6%). Cardiopulmonary complications did not occur. No patient died. DISCUSSION: Good rates of bony consolidation were seen for atlas fractures type III as well as dens fractures type III, which correlate with data in the literature. Dens fractures type II (isolated and combined) and atlas fractures type III in combination with dens fractures showed a worse radiological outcome, which is also unsatisfactory compared to the literature. The rates for procedure-specific complications were relatively low. In particular, work from recent years has demonstrated very good rates for bony consolidation and low complication rates for the treatment of atlas and/or dens fractures with the halofixator, which are confirmed by our results. In contrast, however, a significantly higher cardiac/respiratory complication rate has been reported than occurred in our own patient population.

Cemented Sacroiliac Screw Fixation versus Conservative Therapy in Fragility Fractures of the Posterior Pelvic Ring: A Matched-Pair Analysis of a Prospective Observational Study.

The aim of this study was to compare the outcome of cemented sacroiliac screw fixation to that of conservative treatment in nondisplaced fragility fractures of the sacrum during a 12-month follow-up. Therefore, matched-pair analysis including 40 patients from a previously performed prospective observational study was conducted. Pain was assessed using the visual analogue scale (VAS), functional capabilities and mobility were assessed using the Barthel index, and health-related quality of life (HRQL) was assessed using the EQ-5D questionnaire at 6 weeks, 6 months, and 12 months after the fracture, respectively. No significant differences between the two groups were seen regarding pain. In the operative group, a significantly improved Barthel index was observed after 6 months. A significantly higher HRQL was identified after 6 weeks in the operative group. Their mobility was comparable between the two groups before the fracture; after 6 weeks, mobility was significantly improved in the operative group. After 12 months, no significant differences were found regarding the functional outcome, HRQL or mobility. The 1-year mortality rate was 25% in the conservative group versus 5% in the operative group (not statistically significant). The present study revealed favorable short-term outcomes concerning the functional outcome, HRQL and mobility after sacroiliac screw fixation. After 12 months, the outcomes were similar to those of the patients managed conservatively.

Treatment and Outcome of Osteoporotic Thoracolumbar Vertebral Body Fractures With Deformation of Both Endplates With or Without Posterior Wall Involvement (OF 4): Short-Term Results from the Prospective EOFTT Multicenter Study.

STUDY DESIGN: Multicenter prospective cohort study. OBJECTIVE: To analyse therapeutical strategies applied to osteoporotic thoracolumbar OF 4 injuries, to assess related complications and clinical outcome. METHODS: A multicenter prospective cohort study (EOFTT) including 518 consecutive patients who were treated for an Osteoporotic vertebral compression fracture (OVCF). For the present study, only patients with OF 4 fractures were analysed. Outcome parameters were complications, Visual Analogue Scale, Oswestry Disability Questionnaire, Timed Up & Go test, EQ-5D 5L, and Barthel Index after a minimum follow-up of 6 weeks. RESULTS: A total of 152 (29%) patients presented with OF 4 fractures with a mean age of 76 years (range 41-97). The most common treatment was short-segment posterior stabilization (51%; hybrid stabilization in 36%). Mean follow up was 208 days (±131 days), mean ODI was 30 ± 21. Dorsoventral stabilized patients were younger compared to the other groups (P < .001) and had significant better TuG compared to hybrid stabilization (P = .049). The other clinical outcomes did not differ in the therapy strategies (VAS pain: P = 1.000, ODI: P > .602, Barthel: P > .252, EQ-5D 5L index value: P > .610, VAS-EQ-5D 5L: P = 1.000). The inpatient complication rate was 8% after conservative and 16% after surgical treatment. During follow-up period 14% of conservatively treated patients and 3% of surgical treated patients experienced neurological deficits. CONCLUSIONS: Conservative therapy of OF 4 injuries seems to be viable option in patients with only moderate symptoms. Hybrid stabilization was the dominant treatment strategy leading to promising clinical short-term results. Stand-alone cement augmentation seems to be a valid alternative in selected cases.

Treatment and Outcome of Osteoporotic Thoracolumbar Vertebral Fractures With Anterior or Posterior Tension Band Failure (OF 5): Short-Term Results From the Prospective EOFTT Multicenter Study.

STUDY DESIGN: Subgroup analysis of a multicenter prospective cohort study. OBJECTIVE: To analyse surgical strategies applied to osteoporotic thoracolumbar osteoporotic fracture (OF) 5 injuries with anterior or posterior tension band failure and to assess related complications and clinical outcome. METHODS: A multicenter prospective cohort study (EOFTT) was conducted at 17 spine centers including 518 consecutive patients who were treated for an osteoporotic vertebral fracture (OVF). For the present study, only patients with OF 5 fractures were analysed. Outcome parameters were complications, Visual Analogue Scale (VAS), Oswestry Disability Questionnaire (ODI), Timed Up & Go test (TUG), EQ-5D 5L, and Barthel Index. RESULTS: In total, 19 patients (78 ± 7 years, 13 female) were analysed. Operative treatment consisted of long-segment posterior instrumentation in 9 cases and short-segment posterior instrumentation in 10 cases. Pedicle screws were augmented in 68 %, augmentation of the fractured vertebra was performed in 42%, and additional anterior reconstruction was done in 21 %. Two patients (11 %) received short-segment posterior instrumentation without either anterior reconstruction or cement-augmentation of the fractured vertebra. No surgical or major complications occurred, but general postoperative complications were observed in 45%. At a follow-up of mean 20 ± 10 weeks (range, 12 to 48 weeks), patients showed significant improvements in all functional outcome parameters. CONCLUSIONS: In this analysis of patients with type OF 5 fractures, surgical stabilization was the treatment of choice and lead to significant short-term improvement in terms of functional outcome and quality of life despite a high general complication rate.

Clinical Evaluation of the Osteoporotic Fracture Treatment Score (OF-Score): Results of the Evaluation of the Osteoporotic Fracture Classification, Treatment Score and Therapy Recommendations (EOFTT) Study.

STUDY DESIGN: Multicenter prospective cohort study. OBJECTIVE: The study aims to validate the recently developed OF score for treatment decisions in patients with osteoporotic vertebral compression fractures (OVCF). METHODS: This is a prospective multicenter cohort study (EOFTT) in 17 spine centers. All consecutive patients with OVCF were included. The decision for conservative or surgical therapy was made by the treating physician independent of the OF score recommendation. Final decisions were compared to the recommendations given by the OF score. Outcome parameters were complications, Visual Analogue Scale, Oswestry Disability Questionnaire, Timed Up & Go test, EQ-5D 5 L, and Barthel Index. RESULTS: In total, 518 patients (75.3% female, age 75 ± 10) years were included. 344 (66%) patients received surgical treatment. 71% of patients were treated following the score recommendations. For an OF score cut-off value of 6.5, the sensitivity and specificity to predict actual treatment were 60% and 68% (AUC .684, P < .001). During hospitalization overall 76 (14.7%) complications occurred. The mean follow-up rate and time were 92% and 5 ± 3.5 months, respectively. While all patients in the study cohort improved in clinical outcome parameters, the effect size was significantly less in the patients not treated in line with the OF score's recommendation. Eight (3%) patients needed revision surgery. CONCLUSIONS: Patients treated according to the OF score's recommendations showed favorable short-term clinical results. Noncompliance with the score resulted in more pain and impaired functional outcome and quality of life. The OF score is a reliable and save tool to aid treatment decision in OVCF.

Georg Schmorl prize of the German spine society (DWG) 2022: current treatment for inpatients with osteoporotic thoracolumbar fractures-results of the EOFTT study.

AIM: Osteoporotic thoracolumbar fractures are of increasing importance. To identify the optimal treatment strategy this multicentre prospective cohort study was performed. PURPOSE: Patients suffering from osteoporotic thoracolumbar fractures were included. Excluded were tumour diseases, infections and limb fractures. Age, sex, trauma mechanism, OF classification, OF-score, treatment strategy, pain condition and mobilization were analysed. METHODS: A total of 518 patients' aged 75 ± 10 (41-97) years were included in 17 centre. A total of 174 patients were treated conservatively, and 344 were treated surgically, of whom 310 (90%) received minimally invasive treatment. An increase in the OF classification was associated with an increase in both the likelihood of surgery and the surgical invasiveness. RESULTS: Five (3%) complications occurred during conservative treatment, and 46 (13%) occurred in the surgically treated patients. 4 surgical site infections and 2 mechanical failures requested revision surgery. At discharge pain improved significantly from a visual analogue scale score of 7.7 (surgical) and 6.0 (conservative) to a score of 4 in both groups (p < 0.001). Over the course of treatment, mobility improved significantly (p = 0.001), with a significantly stronger (p = 0.007) improvement in the surgically treated patients. CONCLUSION: Fracture severity according to the OF classification is significantly correlated with higher surgery rates and higher invasiveness of surgery. The most commonly used surgical strategy was minimally invasive short-segmental hybrid stabilization followed by kyphoplasty/vertebroplasty. Despite the worse clinical conditions of the surgically treated patients both conservative and surgical treatment led to an improved pain situation and mobility during the inpatient stay to nearly the same level for both treatments.

AI Prediction of Neuropathic Pain after Lumbar Disc Herniation-Machine Learning Reveals Influencing Factors.

The treatment options for neuropathic pain caused by lumbar disc herniation have been debated controversially in the literature. Whether surgical or conservative therapy makes more sense in individual cases can hardly be answered. We have investigated whether a machine learning-based prediction of outcome, regarding neuropathic pain development, after lumbar disc herniation treatment is possible. The extensive datasets of 123 consecutive patients were used to predict the development of neuropathic pain, measured by a visual analogue scale (VAS) for leg pain and the Oswestry Disability Index (ODI), at 6 weeks, 6 months and 1 year after treatment of lumbar disc herniation in a machine learning approach. Using a decision tree regressor algorithm, a prediction quality within the limits of the minimum clinically important difference for the VAS and ODI value could be achieved. An analysis of the influencing factors of the algorithm reveals the important role of psychological factors as well as body weight and age with pre-existing conditions for an accurate prediction of neuropathic pain. The machine learning algorithm developed here can enable an assessment of the course of treatment after lumbar disc herniation. The early, comparative individual prediction of a therapy outcome is important to avoid unnecessary surgical therapies as well as insufficient conservative therapies and prevent the chronification of neuropathic pain.

Impact of 2 different posterior screw fixation techniques on primary stability in a cervical translational injury model: A biomechanical evaluation.

BACKGROUND: In case of injuries to the subaxial cervical spine, especially in osteoporotic bone, the question of the most stable operative technique arises. There are several techniques of screw fixation available regarding dorsal stabilization. This study investigates 2 techniques (lateral mass screws (LMS) vs cervical pedicle screws (CPS)) in the subaxial cervical spine regarding primary stability in a biomechanical testing using a translational injury model. METHODS: A total of 10 human formalin fixed and 10 human fresh-frozen specimens (C 4 - T 1) were investigated. Specimens were randomized in 2 groups. Fracture generation of a luxation injury between C 5 and C 6 was created by a transection of all ligamentous structures as well as the intervertebral disc and a resection of the facet joints.Dorsal stabilization of C 4/C 5 to C 6/C 7 was performed in group A by lateral mass screws, in group B by pedicle screws. In the biomechanical testing, the specimens were loaded at 2 N/s in translation direction until implant failure. RESULTS: Formalin fixed specimen: Mean load failure was 513.8 (±86.74) Newton (N) for group A (LMS) and 570.4 (±156.5) N for group B (CPS). There was no significant difference (P = .6905).Fresh frozen specimen: Mean load failure was 402.3 (±96.4) N for group A (LMS) and 500.7 (±190.3) N for group B (CPS). There was no significant difference (P = .4206). CONCLUSION: In our loading model respecting the translational injury pattern and a flexion movement we could not verify statistically significant differences between lateral mass screws and cervical pedicle screws. Mean loading failure was slightly higher in the CPS group though.

Coffee break has no impact on laparoscopic skills: a randomized double-blinded placebo-controlled parallel-group trial.

BACKGROUND: Coffee is a widely consumed beverage. Surgeons often drink coffee before performing surgery. Caffeine intake leads to tremor which might have a negative effect on surgeons' fine motor skills. METHODS: A double-blinded parallel-group trial was conducted in order to investigate if caffeinated coffee intake has a negative effect on laparoscopic skills and increases tremor, regardless of previous coffee consumption. 118 participants were selected during a congress of the German Society of Surgery. Exclusion criteria were immaturity and no given consent. Participants and investigators were blinded. Participants were randomized with a 1:1 allocation into interventional group receiving caffeinated coffee or placebo group receiving decaffeinated coffee. The motor skills were tested with two validated laparoscopic exercises at a laparoscopy simulator (LapSim®) before and 30 min after coffee intake. Data on influencing factors were recorded in a standardized questionnaire and tested for equal distribution in both groups. In both exercises four parameters were recorded: left and right hand path length and angular path. Their differences and the resulting effect scores were calculated for both groups as primary outcome to test which group showed greater improvement on the second round of exercises. Registration number DRKS00023608, registered retrospectively. RESULTS: Fifty nine subjects were assigned to each the interventional (54 analyzed) and placebo group (53 analyzed) with 11 drop outs. There was no significant difference between the placebo and interventional group in the two exercises in effect score 30 min after coffee intake [mean (SD); 38.58 (10.66) vs. 41.73 (7.40) and 113.09 (28.94) vs. 116.59 (25.63)]. A significant improvement from first to second measurement in the first exercise could be observed for both groups, demonstrating the training effect. CONCLUSION: In our study, we verified that additional caffeinated coffee intake, e.g., during a coffee break, does not lead to deterioration of laparoscopic fine motor skills.

Is cement-augmented sacroiliac screw fixation with partially threaded screws superior to that with fully threaded screws concerning compression and pull-out force in fragility fractures of the sacrum? - a biomechanical analysis.

BACKGROUND: Providing a stable osteosynthesis in fragility fractures of the pelvis can be challenging. Cement augmentation increases screw fixation in osteoporotic bone. Generating interfragmentary compression by using a lag screw also improves the stability. However, it is not known if interfragmentary compression can be achieved in osteoporotic sacral bone by cement augmentation of lag screws. The purpose of this study was to compare cement-augmented sacroiliac screw osteosynthesis using partially versus fully threaded screws in osteoporotic hemipelvises concerning compression of fracture gap and pull-out force. METHODS: Nine fresh-frozen human cadaveric pelvises with osteoporosis were used. In all specimens, one side was treated with an augmented fully threaded screw (group A), and the other side with an augmented partially threaded screw (group B) after generating a vertical osteotomy on both sides of each sacrum. Afterwards, first a compression test with fracture gap measurement after tightening of the screws was performed, followed by an axial pull-out test measuring the maximum pull-out force of the screws. RESULTS: The fracture gap was significantly wider in group A (mean: 1.90 mm; SD: 1.64) than in group B (mean: 0.91 mm; SD: 1.03; p = 0.028). Pull-out force was higher in group A (mean: 1696 N; SD: 1452) than in group B (mean: 1616 N; SD: 824), but this difference was not statistically significant (p = 0.767). CONCLUSIONS: Cement augmentation of partially threaded screws in sacroiliac screw fixation allows narrowing of the fracture gap even in osteoporotic bone, while resistance against pull-out force is not significantly lower in partially threaded screws compared to fully threaded screws.

Height and volume restoration in osteoporotic vertebral compression fractures: a biomechanical comparison of standard balloon kyphoplasty versus Tektona® in a cadaveric fracture model.

BACKGROUND: Standard balloon kyphoplasty represents a well-established treatment option for osteoporotic vertebral compression fractures. Aim of the present study was to evaluate two different methods of percutaneous augmentation (standard balloon kyphoplasty (BKP) versus Tektona® (TEK)) with respect to height restoration. METHODS: Four-teen vertebral bodies of two female cadavers were examined. Fractures were created using a standardized protocol. CT-scans were taken before and after fracture, as well as after treatment. Afterwards two groups were randomly assigned in a matched pair design: 7 vertebral bodies (VB) were treated with BKP (Kyphon, Medtronic) and 7 vertebral bodies by TEK (Spineart, Switzerland) Anterior, central and posterior vertebral body heights were evaluated by CT-scans. Volumetry was performed using the CT-scans at three different timepoints. RESULTS: Values before fracture represent 100%. The anterior height after fracture was reduced to 75.99 (± 4.8) % for the BKP group and to 76.54 (± 9.17) % in the TEK Group. Statistically there was no difference for the groups (p = 1). After treatment the values increased to 93.06 (± 5) % for the BKP Group and 87.71 (± 6.2) % for the TEK Group. The difference before and after treatment was significant for both groups (BKP p = 0.0006; TEK p = 0.03). Within the groups, there was no difference (p = 0.13). The Volume of the vertebral body was reduced to 82.29 (± 8.4) % in the BKP Group and to 76.54 (± 8.6) % in the TEK Group. After treatment the volume was 89.26 (± 6.9) % for the BKP Group and 88.80 (± 8.7) % for the TEK Group. The difference before and after treatment was significant only for the TEK group (BKP p = 0.0728 n.s.; TEK p = 0.0175). Within the groups, there was no difference (p = 0.2). The average cement volume used was 6.1 (range 3.6-9 ml) for the BKP group and 5.3 (3-7.2 ml) for the TEK group respectively. CONCLUSIONS: Based on our results the new System Tektona® in osteoporotic compression fractures might represent a promising alternative for the clinical setting, especially preserving bone. Further biomechanical tests and clinical studies have to proof Tektona®`s capabilities.

More than a reposition tool: additional wire cerclage leads to increased load to failure in plate osteosynthesis for supracondylar femoral shaft fractures.

INTRODUCTION: Surgical treatment of supracondylar femoral fractures can be challenging. An additional wire cerclage is a suggested way to facilitate fracture reduction prior to plate osteosynthesis. Denudation to the periosteum remains a problematic disadvantage of this procedure. This study analyzed the effect of an additional wire cerclage on the load to failure in plate osteosynthesis of oblique supracondylar femoral shaft fractures. MATERIALS AND METHODS: On eight pairs of non-osteoporotic human femora (mean age 74 years; range 57-95 years), an unstable AO/OTA 32-A2.3 fracture was established. All specimens were treated with a polyaxially locking plate. One femur of each pair was randomly selected to receive an additional fracture fixation with a wire cerclage. A servohydraulic testing machine was used to perform an incremental cyclic axial load with a load to the failure mode. RESULTS: Specimens stabilized with solely plate osteosynthesis failed at a mean load of 2450 N (95% CI: 1996-2904 N). In the group with an additional wire cerclage, load to failure was at a mean of 3100 N (95% CI: 2662-3538 N) (p = 0.018). Compression deformation with shearing of the condyle region through cutting of screws out of the condylar bone was the most common reason for failure in both groups of specimens. Whereas axial stiffness was comparable between both groups (p = 0.208), plastic deformation of the osteosynthesis constructs differed significantly (p = 0.035). CONCLUSIONS: An additional wire cerclage significantly increased the load to failure. Therefore, an additional cerclage represents more than just a repositioning aid. With appropriate fracture morphology, a cerclage can significantly improve the strength of the osteosynthesis.

Cement augmentation of an angular stable plate osteosynthesis for supracondylar femoral fractures - biomechanical investigation of a new fixation device.

BACKGROUND: Implant anchorage in highly osteoporotic bone is challenging, since it often leads to osteosynthesis failure in geriatric patients with supracondylar femoral fractures. Cementation of screws is presumed to prevent such osteosynthesis failure. This study aimed to investigate the effect of a newly designed, cementable fenestrated condylar screw for plate fixation in a biomechanical setting. METHODS: Eight pairs of osteoporotic cadaver femora with an average age of 77 years, ranging between 62 and 88 years, were randomly assigned to either an augmented or a non-augmented group. In both groups an instable 33-A3 fracture according to the AO / OTA classification was fixed with an angular stable locking plate. All right samples received a cement augmentation of their fenestrated condylar screws with calcium phosphate bone cement (CPC). Mechanical testing was performed at a load to failure mode by cyclic axial loading, using a servohydraulic testing machine. RESULTS: With a mean of 2475 N (95% CI: 1727-3223 N), the pressure forces resulting in osteosynthesis failure were significantly higher in specimen with cemented condylar screws as compared to non-cemented samples (1875 N (95% CI: 1320-2430 N)) (p = 0.024). In both groups the deformation of the constructs, with the distal screws cutting through the condylar bone, were the most frequent cause for failure. Analysis of axial stiffness (p = 0.889) and irreversible deformity of the specimens revealed no differences between the both groups (p = 0.161). No cement leakage through the joint line or the medial cortex was observed. CONCLUSION: Based on the present study results, the newly introduced, cementable condylar screw could be an encouraging feature for the fixation of supracondylar femoral fractures in patients with reduced bone quality in terms of load to failure accuracy of the cement application.

Short stems have lower load at failure than double-wedged stems in a cadaveric cementless fracture model.

OBJECTIVES: Periprosthetic femoral fractures (PFFs) have a higher incidence with cementless stems. The highest incidence among various cementless stem types was observed with double-wedged stems. Short stems have been introduced as a bone-preserving alternative with a higher incidence of PFF in some studies. The purpose of this study was a direct load-to-failure comparison of a double-wedged cementless stem and a short cementless stem in a cadaveric fracture model. METHODS: Eight hips from four human cadaveric specimens (age mean 76 years (60 to 89)) and eight fourth-generation composite femurs were used. None of the cadaveric specimens had compromised quality (mean T value 0.4 (-1.0 to 5.7)). Each specimen from a pair randomly received either a double-wedged stem or a short stem. A materials testing machine was used for lateral load-to-failure test of up to a maximal load of 5000 N. RESULTS: Mean load at failure of the double-wedged stem was 2540 N (1845 to 2995) and 1867 N (1135 to 2345) for the short stem (p < 0.001). All specimens showed the same fracture pattern, consistent with a Vancouver B2 fracture. The double-wedged stem was able to sustain a higher load than its short-stemmed counterpart in all cases. Failure force was not correlated to the bone mineral density (p = 0.718). CONCLUSION: Short stems have a significantly lower primary load at failure compared with double-wedged stems in both cadaveric and composite specimens. Surgeons should consider this biomechanical property when deciding on the use of short femoral stem.Cite this article: A. Klasan, M. Bäumlein, P. Dworschak, C. Bliemel, T. Neri, M. D. Schofer, T. J. Heyse. Short stems have lower load at failure than double-wedged stems in a cadaveric cementless fracture model. Bone Joint Res 2019;8:489-494. DOI: 10.1302/2046-3758.810.BJR-2019-0051.R1.

Cementing of the hip arthroplasty stem increases load-to-failure force: a cadaveric study.

Background and purpose - To date, there is not a single clinical or mechanical study directly comparing a cemented and a cementless version of the same stem. We investigated the load-to-failure force of a cementless and a cemented version of a double tapered stem. Material and methods - 10 femurs from 5 human cadaveric specimens, mean age 74 years (68-79) were extracted. Bone mineral density (BMD) was measured using peripheral quantitative computed tomography. None of the specimens had a compromised quality (average T value 0.0, -1.0 to 1.4). Each specimen from a pair randomly received a cemented or a cementless version of the same stem. A material testing machine was used for lateral load-to-failure test of up to a maximal load of 5.0 kN. Results - Average load-to-failure of the cemented stem was 2.8 kN (2.3-3.2) and 2.2 kN (1.8-2.8) for the cementless stem (p = 0.002). The cemented version of the stem sustained a higher load than its cementless counterpart in all cases. Failure force was not statistically significantly correlated to BMD (p = 0.07). Interpretation - Implanting a cemented version of the stem increases the load-to-failure force by 25%.

Factors affecting blood loss and blood transfusion in patients with proximal humeral fractures.

BACKGROUND: The aim of this study was to determine the amount of blood loss and the rate of blood transfusion in patients receiving surgery for proximal humeral fractures depending on the treatment and fracture classification. Moreover, factors associated with blood loss and blood transfusion were analyzed. METHODS: The study included 420 patients who had received surgery for proximal humeral fractures. Data from medical records were collected retrospectively. The calculated blood loss and the transfusion rate were analyzed depending on the type of surgery (plate fixation, arthroplasty, and others) or the fracture classification (2-, 3-, and 4-part fractures). The extent of blood loss and the need for transfusion were correlated with potential risk factors. A score to estimate the probability of blood transfusion was developed. RESULTS: Average blood loss was 284 mL, and the transfusion rate was 14.5% for all proximal humeral fractures. Shoulder arthroplasty was associated with higher blood loss (353 mL, P < .01) and a higher blood transfusion rate (27.3%, P < .01) than plate fixation (263 mL and 10.9%, respectively). The fracture classification had no effect on either factor. Significant risk factors for blood loss were male sex, body mass index, surgery time, time until surgery, and vitamin K antagonists. Age, blood loss, American Society of Anesthesiologists score greater than 2, vitamin K antagonists, coronary artery disease (CAD), peripheral artery disease (PAD), and renal disease were associated with a higher transfusion rate. CONCLUSION: Blood loss could be affected by a shorter surgery time and by choosing an adequate time until surgery. The consideration of risk factors and the use of a transfusion risk score allow more elaborate ordering of cross-matched blood units and can decrease institutional costs.

Long-term outcome after surgical treatment of intra-articular tibial plateau fractures in skiers.

INTRODUCTION: Tibial plateau fractures occur frequently during downhill skiing. There is a lack of information about the outcome and development of posttraumatic osteoarthritis after internal fixation of such fractures at long-term follow-up in skiers. MATERIALS AND METHODS: A population of 83 skiers was followed up in a case series after internal fixation of intra-articular tibial plateau fractures AO-OTA 41 B1-B3 and C1-C3. Functional outcomes Visual Analog Scale, Tegner Activity Scale, Modified Lysholm Score, Hospital for Special Surgery (HSS) Knee Score and X-ray images of the affected knees (preoperative, postoperative and at time of follow-up) were obtained. Radiological evaluation focused on severity of osteoarthritis according to the Kellgren and Lawrence score of the lateral, medial and retropatellar knee compartments separately. Subgroup analyses for fracture type and age were performed separately. RESULTS: Patients age was 49.8 ± 12.9 years (range 19-74 years) at the time of surgery, with a mean follow-up period of 10.3 ± 1.9 years (range 6-14 years). All tibial plateau fractures affected the lateral compartment, while the medial compartment was affected in addition as part of bicondylar fractures in two cases. Both the Tegener Activity Scale and Lysholm Score decreased significantly during the follow-up period and their median values dropped from 6 (range 3-7) to 5 (range 2-7) and from 100 (range 90-100) to 95 (range 58-100), respectively (both p < .01). The median clinical knee function at the time of follow-up revealed an HSS Knee Score of 96.5 points (range 74-100). Among the whole patient population, the radiological evaluation at follow-up revealed a significantly higher grade of osteoarthritis in all compartments of the knee joint compared to the time of the operation (p < .01). The grade of osteoarthritis in the lateral compartment was significantly higher than that in the medial and retropatellar compartments (p < .01). CONCLUSIONS: In addition to physiologic aging, progression of radiologic signs of osteoarthritis following internal fixation of intra-articular tibial plateau fractures in an athletic population of skiers is most severe in the lateral knee compartment corresponding to fracture location. However, the long-term functional outcomes seem to be very satisfactory.

Cement augmentation of glenoid baseplate screws does not improve primary stability in reversed shoulder arthroplasty: A cadaveric study.

INTRODUCTION: Cuff tear arthritis and complex proximal humeral fractures are common pathologies that are frequently addressed by the implantation of a reversed shoulder prosthesis. The present cadaveric study aimed to analyze the effect of cement augmentation of the glenoid component on the primary stability in geriatric patients. HYPOTHESIS: Cement augmentation of glenoid baseplate screws has an influence on primary stability in reversed shoulder arthroplasty (RSA). MATERIALS AND METHODS: Glenoid base plates (Delta Xtend, DePuy Synthes, Westchester, USA) were implanted in 6 pairs of formalin-fixated scapulae of 4 female and 2 male donors (average age 83 years). Two angle stable screws were placed at the superior and inferior position. Cement augmentation was performed with 2ml bone cement (Kyphon, Medtronic, Minneapolis, USA) per screw in right specimens. Afterwards, biomechanical testing with 600 to 1000N (100 cycles) at a 65° abduction angle was performed. Finally, a load-to-failure analysis was conducted. RESULTS: No implant loosening was observed during cyclic tests from 600N to 1000N. In addition no difference in the plastic deformation was detected at 600N (p=0.301), 700N (p=0.522), 800N (p=0.480), 900N (p=0.521) and 1000N (p=0.748). Load-to-failure analyses revealed implant loosening at 3314N (SD 823N) in the cement-augmented implants and at 3059N (SD 974N) in scapulae with non-cemented screws (p=0.522). DISCUSSION: Cement-augmented fixation of the glenoid component did not result in an increased primary stability in this study. Thus, the application of cement should be critically assessed considering associated risks and increased costs. LEVEL OF PROOF: Basic science study, controlled laboratory study.

Joint awareness in posttraumatic osteoarthritis of the knee: validation of the forgotten joint score in long term condition after tibial plateau fracture.

BACKGROUND: Evaluating patient-reported outcomes (PRO) in early osteoarthritis (OA) of the knee is difficult. Established measurement tools are focused on one of the two major patient groups in knee surgery: young, highly active patients, or older patients with advanced degenerative OA of the knee. Joint awareness in everyday life is a crucial criterion in measuring PRO. The purpose of this study was to validate a German version of the "Forgotten Joint Score" (FJS) in patients after surgical treatment of tibial plateau fractures. METHODS: In this prospective cohort study, clinical and radiological outcomes data were collected from patients after surgical treatment of tibial plateau fractures following a skiing accident. Functional outcome questionnaires were administered including the FJS, the Lysholm-Score, the Tegner-Activity Scale (TAS), the EuroQol-5D (EQ 5-D), and a subjective rating of change. The validation study was carried out according to the COSMIN checklist protocol. The KLS was used to measure the presence and severity of OA on knee radiographs, and correlation with the FJS was measured. RESULTS: Cronbach's alpha was .96 (95%-CI .92, .99) confirming good internal consistency. Test-retest reliability of the FJS was high with an ICC(67) = .91 (95%-CI .85,.95). Furthermore, no relevant floor or ceiling effects were observed. FJS significantly differed in patients with different OA degrees (p = .041). Symptomatic patients had significant lower FJS than asymptomatic patients (p < .001). CONCLUSIONS: This is the first study validating a disease-specific PRO, the FJS, in long-term outcomes after joint fracture. We demonstrated good psychometric properties and a significant correlation between the FJS and the radiologic degree of OA in patients with a history of tibial plateau fracture. TRIAL REGISTRATION: Clinical Trial Registry University of Regensburg Z-2015-0872-2 . Registered 01. October 2015.