RESUMEN
Nasal drug delivery has been a focus of scientific interest for decades. A number of drug delivery systems and devices are available and have been highly successful in providing better and more comfortable therapy. The benefits of nasal drug delivery are not in question. The nasal surface provides an excellent context for the targeted delivery of active substances. In addition to the large nasal surface area and intensive absorption, the active substances delivered through the nose overcome the blood-brain barrier and can be delivered directly to the central nervous system. Formulations for nasal administration are typically solutions or liquid dispersed systems such as emulsions or suspensions. Formulation techniques for nanostructures have recently undergone intensive development. Solid-phase heterogeneous dispersed systems represent a new direction in pharmaceutical formulations. The wide range of possible examples and the variety of excipients allow for the delivery of a wide range of active ingredients. The aim of our experimental work was to develop a solid drug delivery system that possesses all of the above-mentioned advantageous properties. In developing solid nanosystems, we not only exploited the advantages of size but also the adhesive and penetration-enhancing properties of excipients. During formulation, several amphiphilic compounds with adhesion properties and penetration enhancing effects were incorporated. We used chlorpromazine (CPZ), which is mainly used in the treatment of psychotic disorders such as schizophrenia and bipolar disorder. Chlorpromazine has been previously investigated by our team in other projects. With the availability of previous methods, the analytical characterization of the drug was carried out effectively. Due to the frequent and severe side effects of the drug, the need for therapeutic dose reduction is indisputable. In this series of experiments, we succeeded in constructing drug delivery systems. Finely divided Na nanoparticles were formed using a Büchi B90 nanospray dryer. An important step in the development of the drug carrier was the selection of suitable inert carrier compounds. Particle size determination and particle size distribution analysis were performed to characterize the prepared nanostructures. As safety is the most important aspect of any drug formulation, all components and systems were tested with different biocompatibility assays. The tests performed demonstrated the safe applicability of our systems. The bioavailability of chlorpromazine was studied as a function of the ratio of the active ingredient administered nasally and intravenously. As described above, most nasal formulations are liquids, but our system is solid, so there is currently no tool available to accurately target this system. As a supplement of the project, a nasal dosing device was developed, corresponding to the anatomical structure; a prototype of the device was made using 3D FDM technology. Our results lay the foundation for the design and industrial scaling of a new approach to the design and production of a high-bioavailability nasal medicinal product.
Asunto(s)
Clorpromazina , Nanopartículas , Excipientes/química , Administración Intranasal , Sistemas de Liberación de Medicamentos/métodos , Portadores de Fármacos/química , Nanopartículas/química , Tamaño de la PartículaRESUMEN
Vaginal drug delivery systems can provide a long-term and constant liberation of the active pharmaceutical ingredient even for months. For our experiment, FDM 3D printing was used to manufacture the vaginal ring samples from thermoplastic polyurethane filament, which enables fast manufacturing of complex, personalized medications. 3D printing can be an excellent alternative instead of industrial manufacturing, which is complicated and time-consuming. In our work, the 3D printed vaginal rings were filled manually with jellified metronidazole or chloramphenicol for the treatment of bacterial vaginosis. The need for manual filling was certified by the thermogravimetric and heatflow assay results. The manufactured samples were analyzed by an Erweka USP type II Dissolution Apparatus, and the dissolution profile can be distinguished based on the applied jellifying agents and the API's. All samples were considered non-similar based on the pairwise comparison. The biocompatibility properties were determined by prolonged MTT assay on HeLa cells, and the polymer could be considered non-toxic. Based on the microbiological assay on E. coli metronidazole and chitosan containing samples had bactericidal effects while just metronidazole or just chitosan containing samples bacteriostatic effect. None of these samples showed a fungistatic or fungicide effect against C. albicans. Based on our results, we successfully manufactured 3D printed vaginal rings filled with jellified metronidazole.
RESUMEN
One of the most promising emerging innovations in personalized medication is based on 3D printing technology. For use as authorized medications, 3D-printed products require different in vitro tests, including dissolution and biocompatibility investigations. Our objective was to manufacture implantable drug delivery systems using fused deposition modeling, and in vitro tests were performed for the assessment of these products. Polylactic acid, antibacterial polylactic acid, polyethylene terephthalate glycol, and poly(methyl methacrylate) filaments were selected, and samples with 16, 19, or 22 mm diameters and 0%, 5%, 10%, or 15% infill percentages were produced. The dissolution test was performed by a USP dissolution apparatus 1. A 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide dye (MTT)-based prolonged cytotoxicity test was performed on Caco-2 cells to certify the cytocompatibility properties. The implantable drug delivery systems were characterized by thermogravimetric and heatflow assay, contact angle measurement, scanning electron microscopy, microcomputed tomography, and Raman spectroscopy. Based on our results, it can be stated that the samples are considered nontoxic. The dissolution profiles are influenced by the material properties of the polymers, the diameter, and the infill percentage. Our results confirm the potential of fused deposition modeling (FDM) 3D printing for the manufacturing of different implantable drug delivery systems in personalized medicine and may be applied during surgical interventions.
Asunto(s)
Antiinflamatorios no Esteroideos , Diclofenaco , Impresión Tridimensional , Prótesis e Implantes , Antiinflamatorios no Esteroideos/administración & dosificación , Antiinflamatorios no Esteroideos/química , Tecnología Biomédica , Fenómenos Químicos , Diclofenaco/administración & dosificación , Diclofenaco/química , Fenómenos Mecánicos , Polímeros/química , Solubilidad , Termogravimetría , Microtomografía por Rayos XRESUMEN
BACKGROUND AND PURPOSE: Temporomandibular disorders (TMD) are among the most frequent pathologies of the stomatognathic system. One problem often associated with TMD is the psychoemotional status. The aim of study was to evaluate the psychoemotional status of young adults with pain symptoms associated with TMD. MATERIAL AND METHODS: We analyzed the data of 260 volunteers. The Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) form was used to diagnose TMD. The relationships between TMD/RDC clinical diagnoses and psychoemotional status, as described by the Beck's Depression Inventory (BDI) and Perceived Stress Scale (PSS-10), were analyzed. We divide the group into four on the basis of RDC/TMD Axis I diagnosis. Group 0 included 30 students lacking TMD symptoms. Group I consisted of 30 people with myofascial pain (group IA in RDC/TMD). Group II contained 23 people with disk displacement with reduction (group IIA in RDC/TMD). Group III contained ten people (Group III diagnosis, often associated with pain). RESULTS: We did not find statistically significant differences between the study groups. In subjects with pain (Groups I and III), we found the mean value on the BDI and PSS-10 scales to be higher than among the pain-free subjects (Groups 0 and II). CONCLUSION: In young adults with TMD accompanied by pain, psychoemotional status should also be evaluated.
Asunto(s)
Artralgia/psicología , Artritis/psicología , Depresión/psicología , Luxaciones Articulares/psicología , Estrés Psicológico/psicología , Disco de la Articulación Temporomandibular , Síndrome de la Disfunción de Articulación Temporomandibular/psicología , Adolescente , Estudios de Casos y Controles , Femenino , Humanos , Masculino , Dolor/psicología , Polonia , Escalas de Valoración Psiquiátrica , Estudiantes , Trastornos de la Articulación Temporomandibular/psicología , Adulto JovenRESUMEN
Attempts to explicate the neural abnormalities behind autism spectrum disorders frequently revealed impaired brain connectivity, yet our knowledge is limited about the alterations linked with autistic traits in the non-clinical population. In our study, we aimed at exploring the neural correlates of dimensional autistic traits using a dual approach of diffusion tensor imaging (DTI) and graph theoretical analysis of resting state functional MRI data. Subjects were sampled from a public neuroimaging dataset of healthy volunteers. Inclusion criteria were adult age (age: 18-65), availability of DTI and resting state functional acquisitions and psychological evaluation including the Social Responsiveness Scale (SRS) and Autistic Spectrum Screening Questionnaire (ASSQ). The final subject cohort consisted of 127 neurotypicals. Global brain network structure was described by graph theoretical parameters: global and average local efficiency. Regional topology was characterized by degree and efficiency. We provided measurements for diffusion anisotropy. The association between autistic traits and the neuroimaging findings was studied using a general linear model analysis, controlling for the effects of age, gender and IQ profile. Significant negative correlation was found between the degree and efficiency of the right posterior cingulate cortex and autistic traits, measured by the combination of ASSQ and SRS scores. Autistic phenotype was associated with the decrease of whole-brain local efficiency. Reduction of diffusion anisotropy was found bilaterally in the temporal fusiform and parahippocampal gyri. Numerous models describe the autistic brain connectome to be dominated by reduced long-range connections and excessive short-range fibers. Our finding of decreased efficiency supports this hypothesis although the only prominent effect was seen in the posterior limbic lobe, which is known to act as a connector hub. The neural correlates of the autistic trait in neurotypicals showed only limited similarities to the reported findings in clinical populations with low functioning autism.
Asunto(s)
Trastornos Generalizados del Desarrollo Infantil/fisiopatología , Carácter Cuantitativo Heredable , Adolescente , Adulto , Anciano , Mapeo Encefálico , Niño , Trastornos Generalizados del Desarrollo Infantil/diagnóstico , Imagen de Difusión Tensora , Femenino , Humanos , Procesamiento de Imagen Asistido por Computador , Masculino , Persona de Mediana Edad , Modelos Neurológicos , Autoinforme , Adulto JovenRESUMEN
The aim of this work was to use probabilistic diffusion tractography to examine the organization of the human insular cortex based on the similarities of its remote projections. Forty right-handed healthy subjects (33.8 ± 12.7 years old) with no history of neurological injury were included in the study. After the spatial standardization of diffusion tensor images, insular cortical masks were delineated based on the Harvard-Oxford Cortical Atlas and were used to initiate fibertracking. Cluster analysis by the k-means algorithm was employed to partition the insular voxels into two groups that featured the most distinct distribution of connections. In order to perform volumetric comparisons, the assigned label maps were transformed back to space of the subjects' native anatomical MR images. The outlines of the change in connectivity profile did not respect the known cytoarchitectural subdivisions and were shown to be independent from the gyral anatomy. Interhemispheric asymmetry in the volumes of connectivity-based subdivisions was observed putatively marking a leftward functional dominance of the anterior insula and its reciprocally interconnected targets which influences the size of insular area where similar connections are represented. The fractional anisotropy values were not significantly different between the hemipsheres or connectivity-based clusters; however, the mean diffusivity was higher in the anterior insula in both hemispheres.