RESUMEN
BACKGROUND: Itaconic acid is a promising bio-based building block for the synthesis of polymers, plastics, fibers and other materials. In recent years, Ustilago cynodontis has emerged as an additional itaconate producing non-conventional yeast, mainly due to its high acid tolerance, which significantly reduces saline waste coproduction during fermentation and downstream processing. As a result, this could likely improve the economic viability of the itaconic acid production process with Ustilaginaceae. RESULTS: In this study, we characterized a previously engineered itaconate hyper-producing Ustilago cynodontis strain in controlled fed-batch fermentations to determine the minimal and optimal pH for itaconate production. Under optimal fermentation conditions, the hyper-producing strain can achieve the theoretical maximal itaconate yield during the production phase in a fermentation at pH 3.6, but at the expense of considerable base addition. Base consumption is strongly reduced at the pH of 2.8, but at cost of production yield, titer, and rate. A techno-economic analysis based on the entire process demonstrated that savings due to an additional decrease in pH control reagents and saline waste costs cannot compensate the yield loss observed at the highly acidic pH value 2.8. CONCLUSIONS: Overall, this work provides novel data regarding the balancing of yield, titer, and rate in the context of pH, thereby contributing to a better understanding of the itaconic acid production process with Ustilago cynodontis, especially from an economic perspective.
RESUMEN
BACKGROUND: An important step in replacing petrochemical products with sustainable, cost-effective alternatives is the use of feedstocks other than, e.g., pure glucose in the fermentative production of platform chemicals. Ustilaginaceae offer the advantages of a wide substrate spectrum and naturally produce a versatile range of value-added compounds under nitrogen limitation. A promising candidate is the dicarboxylic acid malic acid, which may be applied as an acidulant in the food industry, a chelating agent in pharmaceuticals, or in biobased polymer production. However, fermentable residue streams from the food and agricultural industry with high nitrogen content, e.g., sugar beet molasses, are unsuited for processes with Ustilaginaceae, as they result in low product yields due to high biomass and low product formation. RESULTS: This study uncovers challenges in evaluating complex feedstock applicability for microbial production processes, highlighting the role of secondary substrate limitations, internal storage molecules, and incomplete assimilation of these substrates. A microliter-scale screening method with online monitoring of microbial respiration was developed using malic acid production with Ustilago trichophora on molasses as an application example. Investigation into nitrogen, phosphate, sulphate, and magnesium limitations on a defined minimal medium demonstrated successful malic acid production under nitrogen and phosphate limitation. Furthermore, a reduction of nitrogen and phosphate in the elemental composition of U. trichophora was revealed under the respective secondary substrate limitation. These adaptive changes in combination with the intricate metabolic response hinder mathematical prediction of product formation and make the presented screening methodology for complex feedstocks imperative. In the next step, the screening was transferred to a molasses-based complex medium. It was determined that the organism assimilated only 25% and 50% of the elemental nitrogen and phosphorus present in molasses, respectively. Due to the overall low content of bioavailable phosphorus in molasses, the replacement of the state-of-the-art nitrogen limitation was shown to increase malic acid production by 65%. CONCLUSION: The identification of phosphate as a superior secondary substrate limitation for enhanced malic acid production opens up new opportunities for the effective utilization of molasses as a more sustainable and cost-effective substrate than, e.g., pure glucose for biobased platform chemical production.
RESUMEN
Adaptive laboratory evolution (ALE) is a widely used microbial strain development and optimization method. ALE experiments, to select for faster-growing strains, are commonly performed as serial batch cultivations in shake flasks, serum bottles, or microtiter plates or as continuous cultivations in bioreactors on a laboratory scale. To combine the advantages of higher throughput in parallel shaken cultures with continuous fermentations for conducting ALE experiments, a new Continuous parallel shaken pH-auxostat (CPA) was developed. The CPA consists of six autonomous parallel shaken cylindrical reactors, equipped with real-time pH control of the culture medium. The noninvasive pH measurement and control are realized by biocompatible pH sensor spots and a programmable pump module, to adjust the dilution rate of fresh medium for each reactor separately. Two different strains of the methylotrophic yeast Ogataea polymorpha were used as microbial model systems for parallel chemostat and pH-auxostat cultivations. During cultivation, the medium is acidified by the microbial activity of the yeast. For pH-auxostat cultivations, the growth-dependent acidification triggers the addition of fresh feed medium into the reactors, leading to a pH increase and thereby to the control of the pH to a predetermined set value. By controlling the pH to a predetermined set value, the dilution rate of the continuous cultivation is adjusted to values close to the washout point, in the range of the maximum specific growth rate of the yeast. The pH control was optimized by conducting a step-response experiment and obtaining tuned PI controller parameters by the Chien-Hrones-Reswick (CHR) PID tuning method. Two pH-auxostat cultivations were performed with two different O. polymorpha strains at high dilution rates for up to 18 days. As a result, up to 4.8-fold faster-growing strains were selected. The increased specific maximum growth rates of the selected strains were confirmed in subsequent batch cultivations.
RESUMEN
BACKGROUND: Komagataella phaffii (Pichia pastoris) has emerged as a common and robust biotechnological platform organism, to produce recombinant proteins and other bioproducts of commercial interest. Key advantage of K. phaffii is the secretion of recombinant proteins, coupled with a low host protein secretion. This facilitates downstream processing, resulting in high purity of the target protein. However, a significant but often overlooked aspect is the presence of an unknown polysaccharide impurity in the supernatant. Surprisingly, this impurity has received limited attention in the literature, and its presence and quantification are rarely addressed. RESULTS: This study aims to quantify this exopolysaccharide in high cell density recombinant protein production processes and identify its origin. In stirred tank fed-batch fermentations with a maximal cell dry weight of 155 g/L, the polysaccharide concentration in the supernatant can reach up to 8.7 g/L. This level is similar to the achievable target protein concentration. Importantly, the results demonstrate that exopolysaccharide production is independent of the substrate and the protein production process itself. Instead, it is directly correlated with biomass formation and proportional to cell dry weight. Cell lysis can confidently be ruled out as the source of this exopolysaccharide in the culture medium. Furthermore, the polysaccharide secretion can be linked to a mutation in the HOC1 gene, featured by all derivatives of strain NRRL Y-11430, leading to a characteristic thinner cell wall. CONCLUSIONS: This research sheds light on a previously disregarded aspect of K. phaffii fermentations, emphasizing the importance of monitoring and addressing the exopolysaccharide impurity in biotechnological applications, independent of the recombinant protein produced.
Asunto(s)
Fermentación , Proteínas Recombinantes , Saccharomycetales , Proteínas Recombinantes/biosíntesis , Proteínas Recombinantes/metabolismo , Proteínas Recombinantes/genética , Saccharomycetales/metabolismo , Saccharomycetales/genética , Biomasa , Técnicas de Cultivo Celular por Lotes , Polisacáridos/metabolismo , Polisacáridos/biosíntesisRESUMEN
PURPOSE: Simultaneous membrane-based feeding and monitoring of the oxygen transfer rate shall be introduced to the newly established perforated ring flask, which consists of a cylindrical glass flask with an additional perforated inner glass ring, for rapid bioprocess development. METHODS: A 3D-printed adapter was constructed to enable monitoring of the oxygen transfer rate in the perforated ring flasks. Escherichia coli experiments in batch were performed to validate the adapter. Fed-batch experiments with different diffusion rates and feed solutions were performed. RESULTS: The adapter and the performed experiments allowed a direct comparison of the perforated ring flasks with Erlenmeyer flasks. In batch cultivations, maximum oxygen transfer capacities of 80 mmol L-1 h-1 were reached with perforated ring flasks, corresponding to a 3.5 times higher capacity than in Erlenmeyer flasks. Fed-batch experiments with a feed reservoir concentration of 500 g glucose L-1 were successfully conducted. Based on the oxygen transfer rate, an ammonium limitation could be observed. By adding 40 g ammonium sulfate L-1 to the feed reservoir, the limitation could be prevented. CONCLUSION: The membrane-based feeding, an online monitoring technique, and the perforated ring flask were successfully combined and offer a new and promising tool for screening and process development in biotechnology.
Asunto(s)
Técnicas de Cultivo Celular por Lotes , Reactores Biológicos , Escherichia coli , Fermentación , Oxígeno , Escherichia coli/metabolismo , Oxígeno/metabolismo , Técnicas de Cultivo Celular por Lotes/métodos , Glucosa/metabolismo , Difusión , Impresión TridimensionalRESUMEN
Cell line generation of mammalian cells is a time-consuming and labor-intensive process, especially because of challenges in clone selection after transfection. Antibiotics are common selection agents for mammalian cells due to their simplicity of use. However, the optimal antibiotic concentration must be determined with a kill curve experiment before clone selection starts. The traditional kill curve experiments are resource-intensive and time-consuming due to necessary sampling and offline analysis effort. This study, thus, explores the potential of online monitoring the oxygen transfer rate (OTR), as a non-invasive and efficient alternative for kill curve experiments. The OTR is monitored using the Transfer-rate Online Measurement (TOM) system and the micro(µ)-scale Transfer-rate Online Measurement (µTOM) device, which was used for mammalian cells first. It could be shown that the OTR curves for both devices align perfectly, affirming consistent cultivation conditions. The µTOM device proves effective in performing kill curve experiments in 96-deep-well plates without the need for sampling and offline analysis. The streamlined approach reduces medium consumption by 95%, offering a cost-effective and time-efficient solution for kill curve experiments. The study validates the generalizability of the method by applying it to two different CHO cell lines (CHO-K1 and sciCHO) with two antibiotics (puromycin and hygromycin B) each. In conclusion, the broad application of OTR online monitoring for CHO cell cultures in 96-deep-well plates is highlighted. The µTOM device proves as a valuable tool for high-throughput experiments, paving the way for diverse applications, such as media and clone screening, cytotoxicity tests, and scale-up experiments.
RESUMEN
Decoupling cell formation from recombinant protein synthesis is a potent strategy to intensify bioprocesses. Escherichia coli strains with mutations in the glucose uptake components lack catabolite repression, display low growth rate, no overflow metabolism, and high recombinant protein yields. Fast growth rates were promoted by the simultaneous consumption of glucose and glycerol, and this was followed by a phase of slow growth, when only glucose remained in the medium. A glycerol-repressible genetic circuit was designed to autonomously induce recombinant protein expression. The engineered strain bearing the genetic circuit was cultured in 3.9 g L-1 glycerol + 18 g L-1 glucose in microbioreactors with online oxygen transfer rate monitoring. The growth was fast during the simultaneous consumption of both carbon sources (C-sources), while expression of the recombinant protein was low. When glycerol was depleted, the growth rate decreased, and the specific fluorescence reached values 17% higher than those obtained with a strong constitutive promoter. Despite the relatively high amount of C-source used, no oxygen limitation was observed. The proposed approach eliminates the need for the substrate feeding or inducers addition and is set as a simple batch culture while mimicking fed-batch performance.
Asunto(s)
Escherichia coli , Glucosa , Glicerol , Proteínas Recombinantes , Glicerol/metabolismo , Escherichia coli/genética , Escherichia coli/metabolismo , Escherichia coli/crecimiento & desarrollo , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Proteínas Recombinantes/biosíntesis , Glucosa/metabolismo , Reactores Biológicos , Redes Reguladoras de Genes , Ingeniería Metabólica/métodos , Proteínas de Escherichia coli/genética , Proteínas de Escherichia coli/metabolismoRESUMEN
Computational fluid dynamics (CFD) has recently become a pivotal tool in the design and scale-up of bioprocesses. While CFD has been extensively utilized for stirred tank reactors (STRs), there exists a relatively limited body of literature focusing on CFD applications for shake flasks, almost exclusively concentrated on fluids at waterlike viscosity. The importance of CFD model validation cannot be overstated. While techniques to elucidate the internal flow field are necessary for model validation in STRs, the liquid distribution, caused by the orbital shaking motion of shake flasks, can be exploited for model validation. An OpenFOAM CFD model for shake flasks has been established. Calculated liquid distributions were compared to suitable, previously published experimental data. Across a broad range of shaking conditions, at waterlike and moderate viscosity (16.7 mPaâs), the CFD model's liquid distributions align excellently with the experimental data, in terms of overall shape and position of the liquid relative to the direction of the centrifugal force. Additionally, the CFD model was used to calculate the volumetric power input, based on the energy dissipation. Depending on the shaking conditions, the computed volumetric power inputs range from 0.1 to 7 kW/m3 and differed on average by 0.01 kW/m3 from measured literature data.
RESUMEN
Industrial cultures are hindered by the physiological complexity of the host and the limited mass transfer capacity of conventional bioreactors. In this study, a minimal cell approach was combined with genetic devices to overcome such issues. A flavin mononucleotide-based fluorescent protein (FbFP) was expressed in a proteome-reduced Escherichia coli (PR). When FbFP was expressed from a constitutive protein generator (CPG), the PR strain produced 47% and 35% more FbFP than its wild type (WT), in aerobic or oxygen-limited regimes, respectively. Metabolic and expression models predicted more efficient biomass formation at higher fluxes to FbFP, in agreement with these results. A microaerobic protein generator (MPG) and a microaerobic transcriptional cascade (MTC) were designed to induce FbFP expression upon oxygen depletion. The FbFP fluorescence using the MTC in the PR strain was 9% higher than that of the WT bearing the CPG under oxygen limitation. To further improve the PR strain, the pyruvate dehydrogenase complex regulator gene was deleted, and the Vitreoscilla hemoglobin was expressed. Compared to oxygen-limited cultures of the WT, the engineered strains increased the FbFP expression more than 50% using the MTC. Therefore, the designed expression systems can be a valuable alternative for industrial cultivations.
Asunto(s)
Oxígeno , Proteoma , Proteoma/genética , Proteoma/metabolismo , Oxígeno/metabolismo , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Escherichia coli/genética , Escherichia coli/metabolismo , Reactores BiológicosRESUMEN
The demand of plasmid DNA (pDNA) as a key element for gene therapy products, as well as mRNA and DNA vaccines, is increasing together with the need for more efficient production processes. An engineered E. coli strain lacking the phosphotransferase system and the pyruvate kinase A gene has been shown to produce more pDNA than its parental strain. With the aim of improving pDNA production in the engineered strain, several strategies to increase the flux to the pentose phosphate pathway (PPP) were evaluated. The simultaneous consumption of glucose and glycerol was a simple way to increase the growth rate, pDNA production rate, and supercoiled fraction (SCF). The overexpression of key genes from the PPP also improved pDNA production in glucose, but not in mixtures of glucose and glycerol. Particularly, the gene coding for the glucose 6-phosphate dehydrogenase (G6PDH) strongly improved the SCF, growth rate, and pDNA production rate. A linear relationship between the G6PDH activity and pDNA yield was found. A higher flux through the PPP was confirmed by flux balance analysis, which also estimates relevant differences in fluxes of the tricarboxylic acid cycle. These results are useful for developing further cell engineering strategies to increase pDNA production and quality.
RESUMEN
Chemically defined mineral media are widely used in bioprocesses, as these show less batch to batch variation compared with complex media. Nonetheless, the recommended media formulations often lead to the formation of precipitants at elevated pH values. These precipitates are insoluble and reduce the availability of macronutrients to the cells, which can result in limiting growth rates and lower productivity. They can also damage equipment by clogging pipes, hoses, and spargers in stirred tank fermenters. In this study, the observed precipitate was analyzed via X-ray fluorescence spectroscopy and identified as the magnesium ammonium phosphate salt struvite (MgNH4 PO4 × 6H2 O). The solubility of struvite crystals is known to be extremely low, causing the macronutrients magnesium, phosphate, and ammonium to be bound in the struvite crystals. Here, it was shown that struvite precipitates can be redissolved under common fermentation conditions. Furthermore, it was found that the struvite particle size distribution has a significant effect on the dissolution kinetics, which directly affects macronutrient availability. At a certain particle size, struvite crystals rapidly dissolved and provided unlimiting growth conditions. Therefore, struvite formation should be considered during media and bioprocess development, to ensure that the dissolution kinetics of struvite are faster than the growth kinetics.
Asunto(s)
Compuestos de Magnesio , Fosfatos , Estruvita , Compuestos de Magnesio/química , Fermentación , Magnesio/química , Precipitación QuímicaRESUMEN
BACKGROUND: The promising yet barely investigated anaerobic species Phocaeicola vulgatus (formerly Bacteroides vulgatus) plays a vital role for human gut health and effectively produces organic acids. Among them is succinate, a building block for high-value-added chemicals. Cultivating anaerobic bacteria is challenging, and a detailed understanding of P. vulgatus growth and metabolism is required to improve succinate production. One significant aspect is the influence of different gas concentrations. CO2 is required for the growth of P. vulgatus. However, it is a greenhouse gas that should not be wasted. Another highly interesting aspect is the sensitivity of P. vulgatus towards O2. In this work, the effects of varying concentrations of both gases were studied in the in-house developed Respiratory Activity MOnitoring System (RAMOS), which provides online monitoring of CO2, O2, and pressure under gassed conditions. The RAMOS was combined with a gas mixing system to test CO2 and O2 concentrations in a range of 0.25-15.0 vol% and 0.0-2.5 vol%, respectively. RESULTS: Changing the CO2 concentration in the gas supply revealed a CO2 optimum of 3.0 vol% for total organic acid production and 15.0 vol% for succinate production. It was demonstrated that the organic acid composition changed depending on the CO2 concentration. Furthermore, unrestricted growth of P. vulgatus up to an O2 concentration of 0.7 vol% in the gas supply was proven. The viability decreased rapidly at concentrations larger than or equal to 1.3 vol% O2. CONCLUSIONS: The study showed that P. vulgatus requires little CO2, has a distinct O2 tolerance and is therefore well suited for industrial applications.
Asunto(s)
Bacteroides , Dióxido de Carbono , Humanos , Dióxido de Carbono/metabolismo , Succinatos , Ácido Succínico , Oxígeno/metabolismoRESUMEN
BACKGROUND: Reducing the costs of biorefinery processes is a crucial step in replacing petrochemical products by sustainable, biotechnological alternatives. Substrate costs and downstream processing present large potential for improvement of cost efficiency. The implementation of in situ adsorption as an energy-efficient product recovery method can reduce costs in both areas. While selective product separation is possible at ambient conditions, yield-limiting effects, as for example product inhibition, can be reduced in an integrated process. RESULTS: An in situ adsorption process was integrated into the production of itaconic acid with Ustilago cynodontis IAmax, as an example of a promising biorefinery process. A suitable feed strategy was developed to enable efficient production and selective recovery of itaconic acid by maintaining optimal glucose concentrations. Online monitoring via Raman spectroscopy was implemented to enable a first process control and understand the interactions of metabolites with the adsorbent. In the final, integrated bioprocess, yield, titre, and space-time yield of the fermentation process were increased to values of 0.41 gIA/gGlucose, 126.5 gIA/L and 0.52 gIA/L/h. This corresponds to an increase of up to 30% in comparison to the first extended batch experiment without in situ product removal. Itaconic acid was recovered with a purity of at least 95% and high concentrations above 300 g/L in the eluate. CONCLUSION: Integration of product separation via adsorption into the bioprocess was successfully conducted and improved the efficiency of itaconic acid production. Raman spectroscopy was proven to be a reliable tool for online monitoring of various metabolites and facilitated design and validation of the complex separation and feed process. The general process concept can be transferred to the production of various similar bioproducts, expanding the tool kit for design of innovative biorefinery processes.
RESUMEN
The Ames test is one of the most applied tools in mutagenicity testing of chemicals ever since its introduction by Ames et al. in the 1970s. Its principle is based on histidine auxotrophic bacteria that regain prototrophy through reverse mutations. In the presence of a mutagen, more reverse mutations occur that become visible as increased bacterial growth on medium without histidine. Many miniaturized formats of the Ames test have emerged to enable the testing of environmental water samples, increase experimental throughput, and lower the required amounts of test substances. However, most of these formats still rely on endpoint determinations. In contrast, the recently introduced Ames RAMOS test determines mutagenicity through online monitoring of the oxygen transfer rate. In this study, the oxygen transfer rate of Salmonella typhimurium TA100 during the Ames plate incorporation test was monitored and compared to the Ames RAMOS test to prove its validity further. Furthermore, the Ames RAMOS test in 96-well scale is newly introduced. For both the Ames plate incorporation and the Ames RAMOS test, the influence of the inoculum cell count on the negative control was highlighted: A lower inoculum cell count led to a higher coefficient of variation. However, a lower inoculum cell count also led to a higher separation efficiency in the Ames RAMOS test and, thus, to better detection of a mutagenic substance at lower concentrations.
Asunto(s)
Histidina , Salmonella typhimurium , Histidina/genética , Salmonella typhimurium/genética , Mutágenos/toxicidad , Mutágenos/química , Mutación , Pruebas de Mutagenicidad , OxígenoRESUMEN
BACKGROUND: Currently, Aspergillus terreus is used for the industrial production of itaconic acid. Although, alternative feedstock use in fermentations is crucial for cost-efficient and sustainable itaconic acid production, their utilisation with A. terreus most often requires expensive pretreatment. Ustilaginacea are robust alternatives for itaconic acid production, evading the challenges, including the pretreatment of crude feedstocks regarding reduction of manganese concentration, that A. terreus poses. RESULTS: In this study, five different Ustilago strains were screened for their growth and production of itaconic acid on defined media. The most promising strains were then used to find a suitable alternative feedstock, based on the local food industry. U. cynodontis ITA Max pH, a highly engineered production strain, was selected to determine the biologically available nitrogen concentration in thick juice and molasses. Based on these findings, thick juice was chosen as feedstock to ensure the necessary nitrogen limitation for itaconic acid production. U. cynodontis ITA Max pH was further characterised regarding osmotolerance and product inhibition and a successful scale-up to a 2 L stirred tank reactor was accomplished. A titer of 106.4 gitaconic acid/L with a theoretical yield of 0.50 gitaconic acid/gsucrose and a space-time yield of 0.72 gitaconic acid/L/h was reached. CONCLUSIONS: This study demonstrates the utilisation of alternative feedstocks to produce ITA with Ustilaginaceae, without drawbacks in either titer or yield, compared to glucose fermentations.
Asunto(s)
Glucosa , Manganeso , Fermentación , NitrógenoRESUMEN
Costly complex media components such as yeast extract and peptone are still widely used in industrial bioprocesses, despite their ill-defined composition. Side stream products such as corn steep liquor (CSL) present a compelling economical alternative that contains valuable nutrients required for microbial growth, that is, nitrogen and amino acids, but also vitamins, trace elements, and other minerals. However, as a side stream product, CSL may be subject to batch-to-batch variations and compositional heterogeneity. In this study, the Respiration Activity MOnitoring System designed for shake flasks (RAMOS) and 96-well microtiter plates (µTOM) were applied to investigate the potential and constraints of CSL utilization for two model microorganisms: E. coli and B. subtilis. Considering the dry substance content of complex nutrients involved, CSL-based media are more efficient in biomass production than the common lysogeny broth (LB) medium, containing 5 g/L yeast extract, 10 g/L peptone, and 5 g/L NaCl. At a glucose to CSL (glucose/CSL, g/g) ratio of 1/1 (g/g) and 2/1 (g/g), a secondary substrate limitation occurred in E. coli and B. subtilis cultivations, respectively. The study sheds light on differences in the metabolic activity of the two applied model organisms between varying CSL batches, which relate to CSL origin and production process, as well as the effect of targeted nutrient supplementation. Through a targeted nutrient supplementation, the most limiting component of the CSL-glucose medium used for these applied model microorganisms was identified to be ammonium nitrogen. This study proves the suitability of CSL as an alternative nutrient source for E. coli and B. subtilis. The RAMOS and µTOM technique detected differences between CSL batches, allowing easy and early identification of varying batches. A consistent performance of the CSL batches in E. coli and B. subtilis cultivations was demonstrated.
Asunto(s)
Escherichia coli , Zea mays , Fermentación , Zea mays/química , Escherichia coli/metabolismo , Peptonas/metabolismo , Nutrientes , Nitrógeno/metabolismo , Glucosa/metabolismo , Medios de Cultivo/químicaRESUMEN
Cultivating Chinese hamster ovary (CHO) cells in microtiter plates (MTPs) with time-resolved monitoring of the oxygen transfer rate (OTR) is highly desirable to provide process insights at increased throughput. However, monitoring of the OTR in MTPs has not been demonstrated for CHO cells, yet. Hence, a CHO cultivation process was transferred from shake flasks to MTPs to enable monitoring of the OTR in each individual well of a 48-well MTP. For this, the cultivation of an industrially relevant, antibody-producing cell line was transferred from shake flask to MTP based on the volumetric oxygen mass transfer coefficient (kL a). Culture behavior was well comparable (deviation of the final IgG titer less than 10%). Monitoring of the OTR in 48-well MTPs was then used to derive the cytotoxicity of dimethyl sulfoxide (DMSO) based on a dose-response curve in a single experiment using a second CHO cell line. Logistic fitting of the dose-response curve determined after 100 h was used to determine the DMSO concentration that resulted in a cytotoxicity of 50% (IC50). A DMSO concentration of 2.70% ± 0.25% was determined, which agrees with the IC50 previously determined in shake flasks (2.39% ± 0.1%). Non-invasive, parallelized, and time-resolved monitoring of the OTR of CHO cells in MTPs was demonstrated and offers excellent potential to speed up process development and assess cytotoxicity.
Asunto(s)
Técnicas de Cultivo de Célula , Oxígeno , Cricetinae , Animales , Células CHO , Oxígeno/metabolismo , Cricetulus , Técnicas de Cultivo de Célula/métodos , Dimetilsulfóxido , Reactores BiológicosRESUMEN
H2 -producing microorganisms are a promising source of sustainable biohydrogen. However, most H2 -producing microorganisms are anaerobes, which are difficult to cultivate and characterize. While several methods for measuring H2 exist, common H2 sensors often require oxygen, making them unsuitable for anaerobic processes. Other sensors can often not be operated at high gas humidity. Thus, we applied thermal conductivity (TC) sensors and developed a parallelized, online H2 monitoring for time-efficient characterization of H2 production by anaerobes. Since TC sensors are nonspecific for H2 , the cross-sensitivity of the sensors was evaluated regarding temperature, gas humidity, and CO2 concentrations. The systems' measurement range was validated with two anaerobes: a high H2 -producer (Clostridium pasteurianum) and a low H2 -producer (Phocaeicola vulgatus). Online monitoring of H2 production in shake flask cultivations was demonstrated, and H2 transfer rates were derived. Combined with online CO2 and pressure measurements, molar gas balances of the cultivations were closed, and an anaerobic respiration quotient was calculated. Thus, insight into the effect of medium components and inhibitory cultivation conditions on H2 production with the model anaerobes was gained. The presented online H2 monitoring method can accelerate the characterization of anaerobes for biohydrogen production and reveal metabolic changes without expensive equipment and offline analysis.
Asunto(s)
Dióxido de Carbono , Hidrógeno , Fermentación , Anaerobiosis , Hidrógeno/metabolismo , Conductividad Térmica , Bacterias Anaerobias/metabolismoRESUMEN
BACKGROUND: One critical parameter in microbial cultivations is the composition of the cultivation medium. Nowadays, the application of chemically defined media increases, due to a more defined and reproducible fermentation performance than in complex media. In order, to improve cost-effectiveness of fermentation processes using chemically defined media, the media should not contain nutrients in large excess. Additionally, to obtain high product yields, the nutrient concentrations should not be limiting. Therefore, efficient medium optimization techniques are required which adapt medium compositions to the specific nutrient requirements of microorganisms. RESULTS: Since most Paenibacillus cultivation protocols so far described in literature are based on complex ingredients, in this study, a chemically defined medium for an industrially relevant Paenibacillus polymyxa strain was developed. A recently reported method, which combines a systematic experimental procedure in combination with online monitoring of the respiration activity, was applied and extended to identify growth limitations for Paenibacillus polymyxa. All cultivations were performed in microtiter plates. By systematically increasing the concentrations of different nutrient groups, nicotinic acid was identified as a growth-limiting component. Additionally, an insufficient buffer capacity was observed. After optimizing the growth in the chemically defined medium, the medium components were systematically reduced to contain only nutrients relevant for growth. Vitamins were reduced to nicotinic acid and biotin, and amino acids to methionine, histidine, proline, arginine, and glutamate. Nucleobases/-sides could be completely left out of the medium. Finally, the cultivation in the reduced medium was reproduced in a laboratory fermenter. CONCLUSION: In this study, a reliable and time-efficient high-throughput methodology was extended to investigate limitations in chemically defined media. The interpretation of online measured respiration activities agreed well with the growth performance of samples measured in parallel via offline analyses. Furthermore, the cultivation in microtiter plates was validated in a laboratory fermenter. The results underline the benefits of online monitoring of the respiration activity already in the early stages of process development, to avoid limitations of medium components, oxygen limitation and pH inhibition during the scale-up.
Asunto(s)
Ácidos Nicotínicos , Paenibacillus polymyxa , Paenibacillus , Paenibacillus polymyxa/metabolismo , Reactores Biológicos , Fermentación , Medios de Cultivo/química , Ácidos Nicotínicos/metabolismoRESUMEN
Bio-based bulk chemicals such as carboxylic acids continue to struggle to compete with their fossil counterparts on an economic basis. One possibility to improve the economic feasibility is the use of crude substrates in biorefineries. However, impurities in these substrates pose challenges in fermentation and purification, requiring interdisciplinary research. This work demonstrates a holistic approach to biorefinery process development, using itaconic acid production on thick juice based on sugar beets with Ustilago sp. as an example. A conceptual process design with data from artificially prepared solutions and literature data from fermentation on glucose guides the simultaneous development of the upstream and downstream processes up to a 100 L scale. Techno-economic analysis reveals substrate consumption as the main constituent of production costs and therefore, the product yield is the driver of process economics. Aligning pH-adjusting agents in the fermentation and the downstream process is a central lever for product recovery. Experiments show that fermentation can be transferred from glucose to thick juice by changing the feeding profile. In downstream processing, an additional decolorization step is necessary to remove impurities accompanying the crude substrate. Moreover, we observe an increased use of pH-adjusting agents compared to process simulations.