Investigating PEDOT:PSS Binder as an Energy Extender in Sulfur Cathodes for Li-S Batteries.

Although lithium-sulfur (Li-S) batteries offer a high theoretical energy density, shuttling of dissolved sulfur and polysulfides is a major factor limiting the specific capacity, energy density, and cyclability of Li-S batteries with a liquid electrolyte. Cathode host materials with a microstructure to restrict the migration of active material may not totally eliminate the shuttling effect or may create additional problems that limit the full dissolution and redox conversion of all active cathode materials. Selecting a cathode coating binder with a multifunctional role offers a universal solution suitable for various cathode hosts. PEDOT:PSS is investigated as such a binder in this study via experimental testing and material characterization as well as multiscale modeling. The study is based on Li-S cells with a sulfur cathode in hollow porous particles as the cathode host and the 10 wt % PEDOT:PSS binder and electrolyte 1 M LiTFSI in 1:1 DOL:DME 1:1 v/v. A reference supercapacitor cell with the same electrolyte and electrodes comprising a coating of the same hollow porous particles and 10 wt % PEDOT:PSS revealed the pseudocapacitive effect of PEDOT:PSS following a surface redox mechanism that dominates the charge phase, which is equivalent to the discharge phase of the Li-S battery cell. A multipore continuum model for supercapacitors and Li-S cells is extended to incorporate the pseudocapacitive effects of PEDOT:PSS with the Li+ ions and the adsorption effects of PEDOT:PSS with respect to sulfur and lithium sulfides in Li-S cells, with the adsorption energies determined via molecular and ab initio simulations in this study. Experimental data and predictions of multiscale simulations concluded a 7-9% extension of the specific capacity of Li-S battery cells due to the surface redox effect of PEDOT:PSS and elimination of lithium sulfides from the anode by slowing down their migration and shuttling via their adsorption by the PEDOT:PSS binder.

Reaction kinetics of lithium-sulfur batteries with a polar Li-ion electrolyte: modeling of liquid phase and solid phase processes.

The present investigation fits the reaction kinetics of a lithium-sulfur (Li-S) battery with polar electrolyte employing a novel two-phase continuum multipore model. The continuum two-phase model considers processes in both the liquid electrolyte phase and the solid precipitates phase, where the diffusion coefficients of the Li+ ions in a solvent-softened solid state are determined from molecular dynamics simulations. Solubility experiments yield the saturation concentration of sulfur and lithium sulfides in the polar electrolyte employed in this study. The model describes the transport of dissolved molecular and ion species in pores of different size in solvated or desolvated form, depending on pore size. The Li-S reaction model in this study is validated for electrolyte 1 M LiPF6 in EC/DMC. It includes seven redox reactions and two cyclic non-electrochemical reactions in the cathode, and the lithium redox reaction at the anode. Electrochemical reactions are assumed to take place in the electrolyte solution or the solid state and cyclic reactions are assumed to take place in the liquid electrolyte phase only. The determination of the reaction kinetics parameters takes place via fitting the model predictions with experimental data of a cyclic voltammetry cycle with in operando UV-vis spectroscopy.

Designing a Graphene Coating-Based Supercapacitor with Lithium Ion Electrolyte: An Experimental and Computational Study via Multiscale Modeling.

Graphene electrodes are investigated for electrochemical double layer capacitors (EDLCs) with lithium ion electrolyte, the focus being the effect of the pore size distribution (PSD) of electrode with respect to the solvated and desolvated electrolyte ions. Two graphene electrode coatings are examined: a low specific surface area (SSA) xGNP-750 coating and a high SSA coating based on a-MWGO (activated microwave expanded graphene oxide). The study comprises an experimental and a computer modeling part. The experimental part includes fabrication, material characterization and electrochemical testing of an EDLC with xGNP-750 coating electrodes and electrolyte 1M LiPF6 in EC:DMC. The computational part includes simulations of the galvanostatic charge-discharge of each EDLC type, based on a continuum ion transport model taking into account the PSD of electrodes, as well as molecular modeling to determine the parameters of the solvated and desolvated electrolyte ions and their adsorption energies with each type of electrode pore surface material. Predictions, in agreement with the experimental data, yield a specific electrode capacitance of 110 F g-1 for xGNP-750 coating electrodes in electrolyte 1M LiPF6 in EC:DMC, which is three times higher than that of the high SSA a-MWGO coating electrodes in the same lithium ion electrolyte.