A Hemispherical Image Sensor Array Fabricated with Organic Photomemory Transistors.

Hemispherical image sensors simplify lens designs, reduce optical aberrations, and improve image resolution for compact wide-field-of-view cameras. To achieve hemispherical image sensors, organic materials are promising candidates due to the following advantages: tunability of optoelectronic/spectral response and low-temperature low-cost processes. Here, a photolithographic process is developed to prepare a hemispherical image sensor array using organic thin film photomemory transistors with a density of 308 pixels per square centimeter. This design includes only one photomemory transistor as a single active pixel, in contrast to the conventional pixel architecture, consisting of select/readout/reset transistors and a photodiode. The organic photomemory transistor, comprising light-sensitive organic semiconductor and charge-trapping dielectric, is able to achieve a linear photoresponse (light intensity range, from 1 to 50 W m-2 ), along with a responsivity as high as 1.6 A W-1 (wavelength = 465 nm) for a dark current of 0.24 A m-2 (drain voltage = -1.5 V). These observed values represent the best responsivity for similar dark currents among all the reported hemispherical image sensor arrays to date. A transfer method was further developed that does not damage organic materials for hemispherical organic photomemory transistor arrays. These developed techniques are scalable and are amenable for other high-resolution 3D organic semiconductor devices.

The synergistic effect of biomimetic electrical stimulation and extracellular-matrix-mimetic nanopattern for upregulating cell activities.

Endogenous bioelectric signaling and the extracellular matrix (ECM) are factors that have a great effect on the performance of cellular functions. Presenting an experimental platform to confirm the synergy effects of an electrical stimulation, which simulates endogenous bioelectricity, and nanopatterns that can be precisely fabricated in various patterns sizes makes it possible to consider those factors effectively. Herein, we have performed a comparison of cellular response to each of general electrical stimulation and biomimetic electrical stimulation (BES) and demonstrated the synergy effects of electrical stimulation and ECM-mimetic nanopatterns. BES has provided the most remarkable proliferation among different types of electrical stimulation and upregulated the behavior of cells through synergy effects with ECM-mimetic nanopatterns. Thus, it is believed that using the synergy effects of BES and ECM-like nanopatterns has broad applications in the biomedical field, such as cell culture with electrical stimulation, induction of cell growth, tissue repair, etc.

Snake fang-inspired stamping patch for transdermal delivery of liquid formulations.

A flexible microneedle patch that can transdermally deliver liquid-phase therapeutics would enable direct use of existing, approved drugs and vaccines, which are mostly in liquid form, without the need for additional drug solidification, efficacy verification, and subsequent approval. Specialized dissolving or coated microneedle patches that deliver reformulated, solidified therapeutics have made considerable advances; however, microneedles that can deliver liquid drugs and vaccines still remain elusive because of technical limitations. Here, we present a snake fang-inspired microneedle patch that can administer existing liquid formulations to patients in an ultrafast manner (<15 s). Rear-fanged snakes have an intriguing molar with a groove on the surface, which enables rapid and efficient infusion of venom or saliva into prey. Liquid delivery is based on surface tension and capillary action. The microneedle patch uses multiple open groove architectures that emulate the grooved fangs of rear-fanged snakes: Similar to snake fangs, the microneedles can rapidly and efficiently deliver diverse liquid-phase drugs and vaccines in seconds under capillary action with only gentle thumb pressure, without requiring a complex pumping system. Hydrodynamic simulations show that the snake fang-inspired open groove architectures enable rapid capillary force-driven delivery of liquid formulations with varied surface tensions and viscosities. We demonstrate that administration of ovalbumin and influenza virus with the snake fang-inspired microneedle patch induces robust antibody production and protective immune response in guinea pigs and mice.

Hierarchically Nanostructured CuO⁻Cu Current Collector Fabricated by Hybrid Methods for Developed Li-Ion Batteries.

We present a simple method of fabricating a hierarchically nanostructured CuO⁻Cu current collector by using laser ablation and metal mold imprinting to maximize the surface area. The laser ablation of the Cu current collector created the CuO nanostructure on the Cu-collector surface. The microstructure was transferred by subsequent imprinting of the microstructure metal mold on the Cu collector. Then, the laser-ablation nanostructure was formed. Consequently, a hierarchical structure is generated. The laser-ablated hierarchical CuO⁻Cu current collector exhibited an improved capacity while maintaining a cyclability that is similar to those of conventional graphite batteries.

Multifunctional Smart Skin Adhesive Patches for Advanced Health Care.

A skin adhesive patch is the most fundamental and widely used medical device for diverse health-care purposes. Conventional skin adhesive patches have been mainly utilized for routine medical purposes such as wound management, fixation of medical devices, and simple drug release. In contrast to traditional skin adhesive patches, recently developed patches incorporate multiple key functions of bulky medical devices into a thin, flexible patch based on emerging nanomaterials and flexible electronic technologies. Consequently, the meaning of the term "skin adhesive patch" becomes broader and smarter compared to the traditional term. This review summarizes recent efforts undertaken in the development of multifunctional advanced skin adhesive patches, and briefly describes future directions and challenges toward the next generation of smart skin adhesive patches for ubiquitous personalized health care.

Ultratransparent and stretchable graphene electrodes.

Two-dimensional materials, such as graphene, are attractive for both conventional semiconductor applications and nascent applications in flexible electronics. However, the high tensile strength of graphene results in fracturing at low strain, making it challenging to take advantage of its extraordinary electronic properties in stretchable electronics. To enable excellent strain-dependent performance of transparent graphene conductors, we created graphene nanoscrolls in between stacked graphene layers, referred to as multilayer graphene/graphene scrolls (MGGs). Under strain, some scrolls bridged the fragmented domains of graphene to maintain a percolating network that enabled excellent conductivity at high strains. Trilayer MGGs supported on elastomers retained 65% of their original conductance at 100% strain, which is perpendicular to the direction of current flow, whereas trilayer films of graphene without nanoscrolls retained only 25% of their starting conductance. A stretchable all-carbon transistor fabricated using MGGs as electrodes exhibited a transmittance of >90% and retained 60% of its original current output at 120% strain (parallel to the direction of charge transport). These highly stretchable and transparent all-carbon transistors could enable sophisticated stretchable optoelectronics.

Directional Matrix Nanotopography with Varied Sizes for Engineering Wound Healing.

Topographic features play a crucial role in the regulation of physiologically relevant cell and tissue functions. Here, an analysis of feature-size-dependent cell-nanoarchitecture interactions is reported using an array of scaffolds in the form of uniformly spaced ridge/groove structures for engineering wound healing. The ridge and groove widths of nanopatterns are varied from 300 to 800 nm and the nanotopography features are classified into three size ranges: dense (300-400 nm), intermediate (500-600 nm), and sparse (700-800 nm). On these matrices, fibroblasts demonstrate a biphasic trend of cell body and nucleus elongation showing the maximum at intermediate feature density, whereas maximum migration speed is observed at the dense case with monotonic decrease upon increasing feature size. The directional organization of cell-synthesized fibronectin fibers can be regulated differently via the nanotopographical features. In an in vitro wound healing model, the covering rate of cell-free regions is maximized on the dense nanotopography and decreased with increasing feature size, showing direct correlation with the trend of migration speed. It is demonstrated that the properties of repaired tissue matrices in the process of wound healing may be controlled via the feature-size-dependent cell-nanoarchitecture interactions, which can be an important consideration for designing tissue engineering scaffolds.

Intrinsically stretchable and healable semiconducting polymer for organic transistors.

Thin-film field-effect transistors are essential elements of stretchable electronic devices for wearable electronics. All of the materials and components of such transistors need to be stretchable and mechanically robust. Although there has been recent progress towards stretchable conductors, the realization of stretchable semiconductors has focused mainly on strain-accommodating engineering of materials, or blending of nanofibres or nanowires into elastomers. An alternative approach relies on using semiconductors that are intrinsically stretchable, so that they can be fabricated using standard processing methods. Molecular stretchability can be enhanced when conjugated polymers, containing modified side-chains and segmented backbones, are infused with more flexible molecular building blocks. Here we present a design concept for stretchable semiconducting polymers, which involves introducing chemical moieties to promote dynamic non-covalent crosslinking of the conjugated polymers. These non-covalent crosslinking moieties are able to undergo an energy dissipation mechanism through breakage of bonds when strain is applied, while retaining high charge transport abilities. As a result, our polymer is able to recover its high field-effect mobility performance (more than 1 square centimetre per volt per second) even after a hundred cycles at 100 per cent applied strain. Organic thin-film field-effect transistors fabricated from these materials exhibited mobility as high as 1.3 square centimetres per volt per second and a high on/off current ratio exceeding a million. The field-effect mobility remained as high as 1.12 square centimetres per volt per second at 100 per cent strain along the direction perpendicular to the strain. The field-effect mobility of damaged devices can be almost fully recovered after a solvent and thermal healing treatment. Finally, we successfully fabricated a skin-inspired stretchable organic transistor operating under deformations that might be expected in a wearable device.

Hierarchical N-Doped Carbon as CO2 Adsorbent with High CO2 Selectivity from Rationally Designed Polypyrrole Precursor.

Carbon capture and sequestration from point sources is an important component in the CO2 emission mitigation portfolio. In particular, sorbents with both high capacity and selectivity are required for reducing the cost of carbon capture. Although physisorbents have the advantage of low energy consumption for regeneration, it remains a challenge to obtain both high capacity and sufficient CO2/N2 selectivity at the same time. Here, we report the controlled synthesis of a novel N-doped hierarchical carbon that exhibits record-high Henry's law CO2/N2 selectivity among physisorptive carbons while having a high CO2 adsorption capacity. Specifically, our synthesis involves the rational design of a modified pyrrole molecule that can co-assemble with the soft Pluronic template via hydrogen bonding and electrostatic interactions to give rise to mesopores followed by carbonization. The low-temperature carbonization and activation processes allow for the development of ultrasmall pores (d < 0.5 nm) and preservation of nitrogen moieties, essential for enhanced CO2 affinity. Furthermore, our described work provides a strategy to initiate developments of rationally designed porous conjugated polymer structures and carbon-based materials for various potential applications.

Remote Manipulation of Droplets on a Flexible Magnetically Responsive Film.

The manipulation of droplets is used in a wide range of applications, from lab-on-a-chip devices to bioinspired functional surfaces. Although a variety of droplet manipulation techniques have been proposed, active, fast and reversible manipulation of pure discrete droplets remains elusive due to the technical limitations of previous techniques. Here, we describe a novel technique that enables active, fast, precise and reversible control over the position and motion of a pure discrete droplet with only a permanent magnet by utilizing a magnetically responsive flexible film possessing actuating hierarchical pillars on the surface. This magnetically responsive surface shows reliable actuating capabilities with immediate field responses and maximum tilting angles of ~90°. Furthermore, the magnetic responsive film exhibits superhydrophobicity regardless of tilting angles of the actuating pillars. Using this magnetically responsive film, we demonstrate active and reversible manipulation of droplets with a remote magnetic force.

Guided extracellular matrix formation from fibroblast cells cultured on bio-inspired configurable multiscale substrata.

Engineering complex extracellular matrix (ECM) is an important challenge for cell and tissue engineering applications as well as for understanding fundamental cell biology. We developed the methodology for fabrication of precisely controllable multiscale hierarchical structures using capillary force lithography in combination with original wrinkling technique for the generation of well-defined native ECM-like platforms by culturing fibroblast cells on the multiscale substrata [1]. This paper provides information on detailed characteristics of polyethylene glycol-diacrylate multiscale substrata. In addition, a possible model for guided extracellular matrix formation from fibroblast cells cultured on bio-inspired configurable multiscale substrata is proposed.

Partially-Screened Field Effect and Selective Carrier Injection at Organic Semiconductor/Graphene Heterointerface.

Due to the lack of a bandgap, applications of graphene require special device structures and engineering strategies to enable semiconducting characteristics at room temperature. To this end, graphene-based vertical field-effect transistors (VFETs) are emerging as one of the most promising candidates. Previous work attributed the current modulation primarily to gate-modulated graphene-semiconductor Schottky barrier. Here, we report the first experimental evidence that the partially screened field effect and selective carrier injection through graphene dominate the electronic transport at the organic semiconductor/graphene heterointerface. The new mechanistic insight allows us to rationally design graphene VFETs. Flexible organic/graphene VFETs with bending radius <1 mm and the output current per unit layout area equivalent to that of the best oxide planar FETs can be achieved. We suggest driving organic light emitting diodes with such VFETs as a promising application.

A skin-inspired organic digital mechanoreceptor.

Human skin relies on cutaneous receptors that output digital signals for tactile sensing in which the intensity of stimulation is converted to a series of voltage pulses. We present a power-efficient skin-inspired mechanoreceptor with a flexible organic transistor circuit that transduces pressure into digital frequency signals directly. The output frequency ranges between 0 and 200 hertz, with a sublinear response to increasing force stimuli that mimics slow-adapting skin mechanoreceptors. The output of the sensors was further used to stimulate optogenetically engineered mouse somatosensory neurons of mouse cortex in vitro, achieving stimulated pulses in accordance with pressure levels. This work represents a step toward the design and use of large-area organic electronic skins with neural-integrated touch feedback for replacement limbs.

A chameleon-inspired stretchable electronic skin with interactive colour changing controlled by tactile sensing.

Some animals, such as the chameleon and cephalopod, have the remarkable capability to change their skin colour. This unique characteristic has long inspired scientists to develop materials and devices to mimic such a function. However, it requires the complex integration of stretchability, colour-changing and tactile sensing. Here we show an all-solution processed chameleon-inspired stretchable electronic skin (e-skin), in which the e-skin colour can easily be controlled through varying the applied pressure along with the applied pressure duration. As such, the e-skin's colour change can also be in turn utilized to distinguish the pressure applied. The integration of the stretchable, highly tunable resistive pressure sensor and the fully stretchable organic electrochromic device enables the demonstration of a stretchable electrochromically active e-skin with tactile-sensing control. This system will have wide range applications such as interactive wearable devices, artificial prosthetics and smart robots.

Bio-inspired configurable multiscale extracellular matrix-like structures for functional alignment and guided orientation of cells.

Inspired by the hierarchically organized protein fibers in extracellular matrix (ECM) as well as the physiological importance of multiscale topography, we developed a simple but robust method for the design and manipulation of precisely controllable multiscale hierarchical structures using capillary force lithography in combination with an original wrinkling technique. In this study, based on our proposed fabrication technology, we approached a conceptual platform that can mimic the hierarchically multiscale topographical and orientation cues of the ECM for controlling cell structure and function. We patterned the polyurethane acrylate-based nanotopography with various orientations on the microgrooves, which could provide multiscale topography signals of ECM to control single and multicellular morphology and orientation with precision. Using our platforms, we found that the structures and orientations of fibroblast cells were greatly influenced by the nanotopography, rather than the microtopography. We also proposed a new approach that enables the generation of native ECM having nanofibers in specific three-dimensional (3D) configurations by culturing fibroblast cells on the multiscale substrata. We suggest that our methodology could be used as efficient strategies for the design and manipulation of various functional platforms, including well-defined 3D tissue structures for advanced regenerative medicine applications.

Topographical extracellular matrix cues on anticancer drug-induced cytotoxicity in stem cells.

In recent years, cell chip-based platforms have begun to show promise as a means of corroborating the findings of in vivo animal tests for cytotoxicity, and perhaps in the future partially replacing the need for such animal models. In contrast to the conventional culture methods, micro- and nanofabrication techniques can be utilized to provide a set of mechanostimulatory signals to the cells that mimic the context of extracellular matrix (ECM) of the tissue in which a particular cell line resides. Here, we report periodic lateral topographic striations, with a pitch ranging approximately from 200 to 800 nm with an intention to mimic a common geometry of fibrils in the ECM such as collagen or elastin, as a platform for investigating anticancer drug-induced cytotoxicity in stem cells. The ECM cues could facilitate perimeter, elongation, and gap junction formation of mesenchymal stem cells (MSCs), which eventually influenced the fate of cells in terms of death and survival against the common chemotherapeutic agent cisplatin. Interestingly, the appropriate inhibition of gap junctions of MSCs on the ECM mimicking substrates could prevent the cisplatin-induced cytotoxicity through the inhibition of the cisplatin-induced 'death signal communication' as compared to that on the flat substrates. Our results imply that nanoscale topography is an important consideration for chip-based cytotoxicity assays, which uniquely enable the consideration and rational design of ECM-like topographic features, and furthermore, that the natural topography of the ECM in the context of stem cell niches may serve as an important indicator for chemotherapeutic agent sensitivity.

Continuous and scalable fabrication of bioinspired dry adhesives via a roll-to-roll process with modulated ultraviolet-curable resin.

A simple yet scalable strategy for fabricating dry adhesives with mushroom-shaped micropillars is achieved by a combination of the roll-to-roll process and modulated UV-curable elastic poly(urethane acrylate) (e-PUA) resin. The e-PUA combines the major benefits of commercial PUA and poly(dimethylsiloxane) (PDMS). It not only can be cured within a few seconds like commercial PUA but also possesses good mechanical properties comparable to those of PDMS. A roll-type fabrication system equipped with a rollable mold and a UV exposure unit is also developed for the continuous process. By integrating the roll-to-roll process with the e-PUA, dry adhesives with spatulate tips in the form of a thin flexible film can be generated in a highly continuous and scalable manner. The fabricated dry adhesives with mushroom-shaped microstructures exhibit a strong pull-off strength of up to ∼38.7 N cm(-2) on the glass surface as well as high durability without any noticeable degradation. Furthermore, an automated substrate transportation system equipped with the dry adhesives can transport a 300 mm Si wafer over 10,000 repeating cycles with high accuracy.

Multiscale patterned transplantable stem cell patches for bone tissue regeneration.

Stem cell-based therapy has been proposed as an enabling alternative not only for the treatment of diseases but also for the regeneration of tissues beyond complex surgical treatments or tissue transplantation. In this study, we approached a conceptual platform that can integrate stem cells into a multiscale patterned substrate for bone regeneration. Inspired by human bone tissue, we developed hierarchically micro- and nanopatterned transplantable patches as synthetic extracellular matrices by employing capillary force lithography in combination with a surface micro-wrinkling method using a poly(lactic-co-glycolic acid) (PLGA) polymer. The multiscale patterned PLGA patches were highly flexible and showed higher tissue adhesion to the underlying tissue than did the single nanopatterned patches. In response to the anisotropically multiscale patterned topography, the adhesion and differentiation of human mesenchymal stem cells (hMSCs) were sensitively controlled. Furthermore, the stem cell patch composed of hMSCs and transplantable PLGA substrate promoted bone regeneration in vivo when both the micro- and nanotopography of the substrate surfaces were synergistically combined. Thus, our study concludes that multiscale patterned transplantable stem cell patches may have a great potential for bone regeneration as well as for various regenerative medicine approaches.

In situ realization of asymmetric ratchet structures within microchannels by directionally guided light transmission and their directional flow behavior.

An asymmetric ratchet structure within microchannels is demonstrated by directionally guided light transmission for controlled liquid flow. A direct and facile method is presented to realize programmed asymmetric structures, which control the fluid direction and speed.

25th anniversary article: scalable multiscale patterned structures inspired by nature: the role of hierarchy.

Multiscale, hierarchically patterned surfaces, such as lotus leaves, butterfly wings, adhesion pads of gecko lizards are abundantly found in nature, where microstructures are usually used to strengthen the mechanical stability while nanostructures offer the main functionality, i.e., wettability, structural color, or dry adhesion. To emulate such hierarchical structures in nature, multiscale, multilevel patterning has been extensively utilized for the last few decades towards various applications ranging from wetting control, structural colors, to tissue scaffolds. In this review, we highlight recent advances in scalable multiscale patterning to bring about improved functions that can even surpass those found in nature, with particular focus on the analogy between natural and synthetic architectures in terms of the role of different length scales. This review is organized into four sections. First, the role and importance of multiscale, hierarchical structures is described with four representative examples. Second, recent achievements in multiscale patterning are introduced with their strengths and weaknesses. Third, four application areas of wetting control, dry adhesives, selectively filtrating membranes, and multiscale tissue scaffolds are overviewed by stressing out how and why multiscale structures need to be incorporated to carry out their performances. Finally, we present future directions and challenges for scalable, multiscale patterned surfaces.