RESUMEN
PURPOSE: Intraoperative hypotension is associated with adverse outcomes. Predicting and proactively managing hypotension can reduce its incidence. Previously, hypotension prediction algorithms using artificial intelligence were developed for invasive arterial blood pressure monitors. This study tested whether routine non-invasive monitors could also predict intraoperative hypotension using deep learning algorithms. METHODS: An open-source database of non-cardiac surgery patients ( https://vitadb.net/dataset ) was used to develop the deep learning algorithm. The algorithm was validated using external data obtained from a tertiary Korean hospital. Intraoperative hypotension was defined as a systolic blood pressure less than 90 mmHg. The input data included five monitors: non-invasive blood pressure, electrocardiography, photoplethysmography, capnography, and bispectral index. The primary outcome was the performance of the deep learning model as assessed by the area under the receiver operating characteristic curve (AUROC). RESULTS: Data from 4754 and 421 patients were used for algorithm development and external validation, respectively. The fully connected model of Multi-head Attention architecture and the Globally Attentive Locally Recurrent model with Focal Loss function were able to predict intraoperative hypotension 5 min before its occurrence. The AUROC of the algorithm was 0.917 (95% confidence interval [CI], 0.915-0.918) for the original data and 0.833 (95% CI, 0.830-0.836) for the external validation data. Attention map, which quantified the contributions of each monitor, showed that our algorithm utilized data from each monitor with weights ranging from 8 to 22% for determining hypotension. CONCLUSIONS: A deep learning model utilizing multi-channel non-invasive monitors could predict intraoperative hypotension with high accuracy. Future prospective studies are needed to determine whether this model can assist clinicians in preventing hypotension in patients undergoing surgery with non-invasive monitoring.
RESUMEN
Background/purpose: The COVID-19 pandemic has had a profound and enduring impact on various aspects of society, including medical education and the training of dental students. The field of dentistry, given its nature, is particularly susceptible to the challenges posed by a pandemic. Prolonged exposure to the pandemic is believed to have increased stress and burnout among medical and dental students. This study aimed to investigate and analyze the relationship between COVID-19 and stress, burnout, and depression in Korean dental students. Materials and methods: A cross-sectional survey was conducted among 162 third and fourth-grade students from the School of Dentistry at Seoul National University. The survey comprised four main sections: general information, the Maslach Burnout Inventory (MBI), the Patient Health Questionnaire-9 (PHQ-9), and the Impact of Event Scale-Revised (IES-R). Results: The results indicated significant differences in age, study time, career satisfaction, and counseling needs between third and fourth-grade students. The fourth-grade students exhibited higher scores in the IES-R survey, PHQ-9 total score, emotional exhaustion, and depersonalization subscale items of the MBI. Furthermore, the group with abnormal responses to COVID-19 demonstrated lower levels of career satisfaction. Conclusion: Fourth-grade dental students experienced higher levels of depression, vulnerability to the effects of COVID-19, and burnout. These findings highlight the need for addressing the mental health challenges faced by dental students during the COVID-19 pandemic.
RESUMEN
Vertical and horizontal rhythms are crucial aspects of a dynamic golf swing, and the two-step swing drills (TSSD) were specifically designed to promote rhythmic unloading and loading of the legs. The purpose of this study was to evaluate the effects of a TSSD training session on the swing rhythm and clubhead speed (CHS) among competitive junior golfers (3.1 ± 4.4 hcp). The driver swings (7 swings each) of 10 competitive junior golfers (aged 15-18) were captured before and after a TSSD session consisting of four stages (lasting less than 45 minutes). Post-TSSD training, there were significant increases in CHS (p < .001), maximum unweighting (p = .006), the trail-side push (p = .009), the horizontal motion ranges of the body and pelvis (p = .005-.031), the upward/downward motion range of the body in the backswing (p = .042/.024), and the backswing/downswing angular velocity peaks of the axle-chain system (p < .033). The stepping-like leg actions primarily facilitated horizontal motion rhythm over vertical motion and unweighting over push in terms of ground interaction. These findings suggest that TSSD can serve as an effective method for developing a rhythmic and dynamic motion pattern while increasing CHS.
RESUMEN
Background: To improve the efficiency of neural development from human embryonic stem cells, human embryoid body (hEB) generation is vital through 3-dimensional formation. However, conventional approaches still have limitations: long-term cultivation and laborious steps for lineage determination. Methods: In this study, we controlled the size of hEBs for ectodermal lineage specification using cell-penetrating magnetic nanoparticles (MNPs), which resulted in reduced time required for initial neural induction. The magnetized cells were applied to concentrated magnetic force for magnet-derived multicellular organization. The uniformly sized hEBs were differentiated in neural induction medium (NIM) and suspended condition. This neurally induced MNP-hEBs were compared with other groups. Results: As a result, the uniformly sized MNP-hEBs in NIM showed significantly improved neural inductivity through morphological analysis and expression of neural markers. Signaling pathways of the accelerated neural induction were detected via expression of representative proteins; Wnt signaling, dopaminergic neuronal pathway, intercellular communications, and mechanotransduction. Consequently, we could shorten the time necessary for early neurogenesis, thereby enhancing the neural induction efficiency. Conclusion: Overall, this study suggests not only the importance of size regulation of hEBs at initial differentiation stage but also the efficacy of MNP-based neural induction method and stimulations for enhanced neural tissue regeneration.
RESUMEN
Gastric cancer remains a global health threat, particularly in Asian countries. Current treatment methods include surgery, chemotherapy, and radiation therapy. However, they all have limitations, such as adverse side effects, tumor resistance, and patient tolerance. Hyperthermia therapy uses heat to selectively target and destroy cancer cells, but it has limited efficacy when used alone. Linderae Radix (LR), a natural compound with thermogenic effects, has the potential to enhance the therapeutic efficacy of hyperthermia treatment. In this study, we investigated the synergistic anticancer effects of cotreatment with LR and 43 °C hyperthermia in AGS gastric cancer cells. The cotreatment inhibited AGS cell proliferation, induced apoptosis, caused cell cycle arrest, suppressed heat-induced heat shock responses, increased reactive oxygen species (ROS) generation, and promoted mitogen-activated protein kinase phosphorylation. N-acetylcysteine pretreatment abolished the apoptotic effect of LR and hyperthermia cotreatment, indicating the crucial role of ROS in mediating the observed anticancer effects. These findings highlight the potential of LR as an adjuvant to hyperthermia therapy for gastric cancer. Further research is needed to validate these findings in vivo, explore the underlying molecular pathways, and optimize treatment protocols for the development of novel and effective therapeutic strategies for patients with gastric cancer.
RESUMEN
BACKGROUND: Basic fibroblast growth factor (bFGF) is one of the critical components accelerating angiogenesis and tissue regeneration by promoting the migration of dermal fibroblasts and endothelial cells associated with matrix formation and remodeling in wound healing process. However, clinical applications of bFGF are substantially limited by its unstable nature due to rapid decomposition under physiological microenvironment. RESULTS: In this study, we present the bFGF-loaded human serum albumin nanoparticles (HSA-bFGF NPs) as a means of enhanced stability and sustained release platform during tissue regeneration. Spherical shape of the HSA-bFGF NPs with uniform size distribution (polydispersity index < 0.2) is obtained via a simple desolvation and crosslinking process. The HSA-bFGF NPs securely load and release the intact soluble bFGF proteins, thereby significantly enhancing the proliferation and migration activity of human dermal fibroblasts. Myofibroblast-related genes and proteins were also significantly down-regulated, indicating decrease in risk of scar formation. Furthermore, wound healing is accelerated while achieving a highly organized extracellular matrix and enhanced angiogenesis in vivo. CONCLUSION: Consequently, the HSA-bFGF NPs are suggested not only as a delivery vehicle but also as a protein stabilizer for effective wound healing and tissue regeneration.
Asunto(s)
Factor 2 de Crecimiento de Fibroblastos , Nanopartículas , Humanos , Factor 2 de Crecimiento de Fibroblastos/farmacología , Células Endoteliales , Albúmina Sérica Humana , Cicatrización de HeridasRESUMEN
For homeland security, radiation portal monitors (RPMs) have been widely used to detect illegal radioactive materials at seaports, airports, nuclear facilities and other highly secured establishments. In general, commercial RPMs are based on a large plastic (i.e. PVT-polyvinyl toluene) scintillator detector and the associated electronics. In order to detect radioactive materials passing through the RPM, the alarm criterion should be set according to the background level, which depends on the operating location due to not only composition differences in soil and rocks but also weather variation (i.e. rainfall and temperature). It is well known that RPM background signal level increases with rainfall and that the PVT signal depends on the temperature due to scintillation light yield variation. In this study, the background signal level of two commercial RPMs (models: 4525-3800 and 7000, Ludlum), both of which are installed and operated at the Incheon and Donghae ports in Korea, was analysed by reference to a 3-year database of minute-to-minute RPM background signals and a rainfall-and-temperature database provided by the Korea Meteorological Administration (KMA). In terms of rainfall, the variation of the background signal level was examined with reference to the amount of rainfall. The averaged variation in the background signal level, which was as high as ~20% as a function of the amount of rainfall, was found to be dependent on a region's specific concentration of 222Rn in the atmosphere. In terms of temperature, the background signal level varied by ~4.7% within the temperature range of -5 to 30°C for the four studied sites (i.e. two sites per region for the Incheon and Donghae regions). Knowledge of the dependency of RPM background signal level on rainfall amount and temperature could be used to achieve more realistic estimation of the background radiation level for optimising commercial RPMs' alarm criteria.
Asunto(s)
Monitoreo de Radiación , Radón , Temperatura , Tiempo (Meteorología)RESUMEN
Kettlebell training provides multiple health benefits, including the generation of power. The primary purpose of this study was to examine the kinematics and kinetics of lower-body joints during a repeated, maximum effort kettlebell swing protocol. Sixteen resistance and kettlebell swing experienced males performed 10 rounds of a kettlebell swing routine (where one round equates to 30s of swings followed by 30s of rest). Kinematic (i.e., swing duration and angular velocities) and kinetic (i.e., normalised sagittal plane ground reaction force, resultant joint moment [RJM] and power) variables were extracted for the early portion and late portion of the round. Average swing duration and the magnitude of normalised ground reaction forces (GRF) increased within rounds, while hip joint power decreased. Changes in swing duration were minimal, but consistent due to an increase in overall fatigue. An increase in the magnitude of GRF was observed at the end of rounds, which is a potential concern for injury. Hip joint power decreased primarily due to a slower angular velocity. This protocol may be an effective routine for those who are resistance trained with kettlebell swing experience, and who want to optimise power in their exercise program.
RESUMEN
Acetaminophen (APAP) overdose-induced hepatotoxicity reduces the activity of sirtuin-1 (Sirt1) along with heme oxygenase 1 (HO-1) and promotes inflammatory responses and oxidative stress. Although the extract of Curcuma aromatica Salisb. (CAS) possesses hepatoprotective properties, scientific evidence on whether CAS prevents hepatotoxicity and the underlying molecular mechanisms are lacking. Here, we hypothesized that CAS ameliorates hepatotoxicity by inhibiting inflammation and oxidative stress via Sirt1/HO-1 signaling. CAS pretreatment at doses of 200 and 400 µg/mL significantly increased cell viability in APAP-treated primary hepatocytes. The expression of inducible nitric oxide synthase (iNOS) substantially increased after APAP treatment; however, this expression significantly decreased in cells pretreated with 100, 200, and 400 µg/mL CAS. CAS increased Sirt1 and HO-1 levels in APAP-treated hepatocytes in a dose-dependent manner. When CAS was orally administered to mice at doses of 20 or 100 mg/kg for 7 days, the APAP-induced increase in serum aspartate aminotransferase and alanine aminotransferase levels was inhibited. Moreover, CAS decreased IL-6, TNF-α, and IL-1ß, increased IL-10, suppressed ROS generation, increased glutathione levels, inhibited iNOS and cyclooxygenase-2, and enhanced Sirt1 and HO-1 in the mouse model of APAP-induced hepatotoxicity. These findings suggest that CAS could be used as a natural hepatoprotective drug to treat APAP-induced injury.
Asunto(s)
Acetaminofén , Enfermedad Hepática Inducida por Sustancias y Drogas , Curcuma , Extractos Vegetales , Animales , Ratones , Acetaminofén/efectos adversos , Enfermedad Hepática Inducida por Sustancias y Drogas/tratamiento farmacológico , Enfermedad Hepática Inducida por Sustancias y Drogas/metabolismo , Curcuma/química , Hemo-Oxigenasa 1/metabolismo , Hígado/metabolismo , Ratones Endogámicos C57BL , Estrés Oxidativo , Transducción de Señal , Sirtuina 1/metabolismo , Extractos Vegetales/farmacologíaRESUMEN
This study evaluated the effect of vibration on adaptation of bulk-fill composite resin. A scanning laser doppler vibrometer measured the frequency and amplitude of a vibratory device (COMO; B&L Biotech) used for resin placement and visualized its effect on the resin according to depth. A bulk-fill composite resin (Filtek Bulk Fill; 3M ESPE) was placed in simulated cavities (4 mm diameter, 4 mm depth) by different layering methods (incremental filling with two 2-mm-thick layers vs. bulk filling with a single 4-mm-thick layer). The groups were further divided based on the application of vibration during restoration (no vibration vs. vibration). In addition to the surface void area at the cavity floor, the overall void volume and the void volumes of the bottom, middle, and top thirds were obtained for micro-computed tomography analysis. The frequency and amplitude of the COMO were approximately 149 Hz and between 26 and 51 µm, respectively. When vibration was not applied, incremental filling had a lower void volume in the bottom third of the cavity than did bulk filling (p < 0.05). Vibration applied with a 4-mm-thick bulk fill had no significant effect on the adaptation of composite resin (p > 0.05). In contrast, vibration reduced the amount of void formation in the bottom third of the cavity during incremental filling (p < 0.05). Application of vibration to resin with a 2-mm incremental-layering technique formed a smaller void at the interface between the cavity and resin and within the bulk-fill composite resin.
Asunto(s)
Aclimatación , Resinas Compuestas , Microtomografía por Rayos X , Polimerizacion , Ensayo de Materiales , Restauración Dental PermanenteRESUMEN
The hemiparkinsonian nonhuman primate model induced by unilateral injection of 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) into the carotid artery is used to study Parkinson's disease. However, there have been no studies that the contralateral distribution of MPTP via the cerebral collateral circulation is provided by both the circle of Willis (CoW) and connections of the carotid artery. To investigate whether MPTP-induced unilaterally damaged regions were determined by asymmetrical cerebral blood flow, the differential asymmetric damage of striatal subregions, and examined structural asymmetries in a circle of Willis, and blood flow velocity of the common carotid artery were observed in three monkeys that were infused with MPTP through the left internal carotid artery. Lower flow velocity in the ipsilateral common carotid artery and a higher ratio of ipsilateral middle cerebral artery diameter to anterior cerebral artery diameter resulted in unilateral damage. Additionally, the unilateral damaged monkey observed the apomorphine-induced contralateral rotation behavior and the temporary increase of plasma RANTES. Contrastively, higher flow velocity in the ipsilateral common carotid artery was observed in the bilateral damaged monkey. It is suggested that asymmetry of blood flow velocity and structural asymmetry of the circle of Willis should be taken into consideration when establishing more efficient hemiparkinsonian nonhuman primate models.
RESUMEN
Tissue regeneration is the ultimate treatment for many degenerative diseases, however, repair and regeneration of damaged organs or tissues remains a challenge. Previously, we showed that B1 Ab and H3 Ab induce stem cells to differentiate into microglia and brown adipocyte-like cells, while trafficking to the brain and heart, respectively. Here, we present data showing that another selected agonist antibody, P1 antibody, induces the migration of cells to the pancreatic islets and differentiates human stem cells into beta-like cells. Interestingly, our results suggest the purified P1 Ab induces beta-like cells from fresh, human CD34+ hematopoietic stem cells and mouse bone marrow. In addition, stem cells with P1 Ab bound to expressed periostin (POSTN), an extracellular matrix protein that regulates tissue remodeling, selectively migrate to mouse pancreatic islets. Thus, these results confirm that our in vivo selection system can be used to identify antibodies from our library which are capable of inducing stem cell differentiation and cell migration to select tissues for the purpose of regenerating and remodeling damaged organ systems.
Asunto(s)
Islotes Pancreáticos , Ratones , Animales , Humanos , Diferenciación Celular , Anticuerpos , Células Madre , Movimiento CelularRESUMEN
Electrical signals represent an essential form of cellular communication. For decades, electrical stimulation has been used effectively in clinical practice to enhance bone healing. However, the detailed mechanisms between electrical stimulation and bone healing are not well understood. In addition, there have been many difficulties in setting up a stable and efficient electrical stimulation system within the in vitro environment. Therefore, various conductive materials and electrical stimulation methods have been tested to establish an effective electrical stimulation system. Through these systems, many studies have been conducted on the effects of electrical stimulation on bone healing and osteogenic differentiation. However, previous studies were limited by the use of opaque conductive materials that obscure the cells; fluorescent observations and staining are known to be two of the critical methods to confirm the states of the cells. Indium tin oxide (ITO) glass is known to have excellent transparency and conductivity, but it is challenging to cultivate cells due to low cell adhesion characteristics. Therefore, we used O2 plasma treatment to increase the hydrophilicity and wettability of ITO glass. This enhanced cell affinity to the glass, providing a stable surface for the cells to attach. Then, electrical stimulation was applied with an amplitude range of 10 to 200 µA at a frequency of 10 Hz. Our results demonstrated that the osteogenic differentiation efficiency was maximized under the amplitude conditions of 10 µA and 50 µA. Accordingly, the results of our study suggest the development of an excellent platform in the field of biological research as a good tool to elucidate various mechanisms of cell bioactivity under electrical conditions.
Asunto(s)
Células Madre Mesenquimatosas , Osteogénesis , Humanos , Diferenciación Celular , Estimulación EléctricaRESUMEN
INTRODUCTION: This study aimed to determine if stress distribution from occlusal loads after targeted endodontic microsurgery (TEMS) differed for trephine-resected flat and curved root-ends, with and without bone graft. METHODS: Finite element analysis models were constructed from cone-beam computed tomography data of a TEMS-treated maxillary central incisor. Models included flat and curved resected root-ends, with and without apical bone graft, and normal or root canal filled controls. In centric occlusion, axial force was directed on mesial and distal lingual marginal ridges at 120° angle. For lateral excursion, additional mesiodistal forces were applied from centric occlusion. For edge biting, axial force was directed on the incisal edge. Under occlusal loads, stress distribution patterns on tooth and root-end circumference were analyzed. RESULTS: In normal and root filled controls, occlusal stress was distributed on labial and palatal root surfaces, concentrated in the labial cervical area, and maximized at the apex. For resected root-ends, occlusal loads concentrated stress on the labial cervical area. With bone graft, maximum stress concentration shifted to the apex, which implied stress relief and dispersion from the cervical root area. Stress patterns on the root-end were more widely spread in models with apical bone graft, whereas curved root-end showed stress concentrating arc especially when without apical bone support. The mean stress values on root-end circumference were significantly higher in curved than flat root-end (P < .05), especially with apical bone support (P < .05). CONCLUSIONS: Occlusal stress patterns on a maxillary central incisor were markedly affected by root-end resection configuration and apical bone support. Trephine-resected curved root-end had stress pattern concentrated on its circumference. Curved and flat root-ends had labial cervical stress that was relieved by bone graft. TEMS resected root-ends should be flattened and bone grafted to disperse stress from occlusal loads.
Asunto(s)
Microcirugia , Raíz del Diente , Análisis de Elementos Finitos , Estrés Mecánico , Raíz del Diente/diagnóstico por imagen , Raíz del Diente/cirugía , Incisivo/cirugíaRESUMEN
Recently, an agricultural monitoring system using the Internet of Things has been developed to realize smart farming. The high performance of various sensors in agricultural monitoring systems is essential for smart farming to automatically monitor and control agricultural environmental conditions such as temperature and water level. In this study, we propose resistive water level sensors based on an AgNWs/PEDOT:PSS-g-PEGME hybrid structure to improve the already high conductivity and water stability of PEDOT:PSS. After spin-coating the AgNWs/PEDOT:PSS-g-PEGME hybrid film, a laser treatment method successfully patterns the resistive water level sensor with areas of higher resistance. When water contacts the sensor, the variation in resistance caused by the water level changes the current flow of the sensor, allowing it to be used to detect the water level. Finally, we develop a water level sensor module as a component of the agricultural monitoring system by connecting the sensor to a microcontroller for water level monitoring in real time. The proposed water level sensors may be a new solution for detecting water levels in agricultural monitoring systems.
RESUMEN
The ubiquitous field-effect transistor (FET) is widely used in modern digital integrated circuits, computers, communications, sensors, and other applications. However, reliable biological FET (bio-FET) is not available in real life due to the rigorous requirement for highly sensitive and selective bio-FET fabrication, which remains a challenging task. Here, we report an ultrasensitive and selective bio-FET created by the nanorings of molybdenum disulfide (MoS2) nanopores inspired by nuclear pore complexes. We characterize the nanoring of MoS2 nanopores by scanning transmission electron microscopy, Raman, and X-ray photoelectron spectroscopy spectra. After fabricating MoS2 nanopore rings-based bio-FET, we confirm edge-selective functionalization by the gold nanoparticle tethering test and the change of electrical signal of the bio-FET. Ultrahigh sensitivity of the MoS2 nanopore edge rings-based bio-FET (limit of detection of 1 ag/mL) and high selectivity are accomplished by effective coupling of the aptamers on the nanorings of the MoS2 nanopore edge for cortisol detection. We believe that MoS2 nanopore edge rings-based bio-FET would provide platforms for everyday biosensors with ultrahigh sensitivity and selectivity.
Asunto(s)
Técnicas Biosensibles , Nanopartículas del Metal , Nanoporos , Oro , Molibdeno/químicaRESUMEN
The purpose of this study was to investigate the linear relationships among the hand/clubhead motion characteristics in golf driving in skilled male golfers (n = 66; handicap ≤ 3). The hand motion plane (HMP) and functional swing plane (FSP) angles, the HMP-FSP angle gaps, the planarity characteristics of the off-plane motion of the clubhead, and the attack angles were computed from the drives captured by an optical motion capture system. The HMP angles were identified as the key variables, as the HMP and FSP angles were intercorrelated, but the plane angle gaps, the planarity bias, and the attack angles showed correlations to the HMP angles primarily. Three main swing pattern clusters were identified. The parallel HMP-FSP alignment pattern with a small direction gap was associated with neutral planarity and planar swing pattern. The inward alignment pattern with a large inward direction gap was characterized by flat planes, follow-through-centric planarity, spiral swing pattern, and inward/downward impact. The outward alignment pattern with a large outward direction gap was associated with steep planes, downswing-centric planarity, reverse spiral swing, and outward/upward impact. The findings suggest that practical drills targeting the hand motion pattern can be effective in holistically reprogramming the swing pattern.
Asunto(s)
Golf , Fenómenos Biomecánicos , Mano , Humanos , Masculino , Rango del Movimiento Articular , Extremidad SuperiorRESUMEN
Gongjin-dan (GJD) is a multiherbal formula produced from 10 medicinal herbs and has been traditonally used as an oriental medicine to treat cardiovascular diseases, alcoholic hepatitis, mild dementia, and anemia. Additionally, increasing evidence suggests that GJD exerts neuroprotective effects by suppressing inflammation and oxidative stress-induced events to prevent neurological diseases. However, the mechanism by which GJD prevents oxidative stress-induced neuronal injury in a mature neuron remains unknown. Here, we examined the preventive effect and mechanism of GJD on primary cortical neurons exposed to hydrogen peroxide (H2O2). In the neuroprotection signaling pathway, Sirtuin1 is involved in neuroprotective action as a therapeutic target for neurological diseases. After pre-treatment with GJD at three concentrations (10, 25, and 50 µg/mL) and stimulation by H2O2 (30 µM) for 24 h, the influence of GJD on Sirtuin1 activation was assessed using immunocytochemistry, real-time PCR, western blotting, and flow cytometry. GJD effectively ameliorated H2O2-induced neuronal death against oxidative damage through Sirtuin1 activation. In addition, GJD-induced Sirtuin1 activation accelerated elongation of new axons and formation of synapses via increased expression of nerve growth factor and brain-derived neurotrophic factor, as well as regeneration-related genes. Thus, GJD shows potential for preventing neurological diseases via Sirtuin1 activation.
Asunto(s)
Proyección Neuronal/efectos de los fármacos , Estrés Oxidativo/efectos de los fármacos , Extractos Vegetales/farmacología , Transducción de Señal/efectos de los fármacos , Sirtuina 1/metabolismo , Animales , Corteza Cerebral/crecimiento & desarrollo , Peróxido de Hidrógeno/efectos adversos , Neuronas/efectos de los fármacos , Fármacos Neuroprotectores/farmacología , Ratas , Ratas Sprague-DawleyRESUMEN
Deformable 3D structures have emerged to revolutionize next-generation flexible electronics. In this study, a large out-of-plane deformable kirigami-based structure integrated with traditional functional materials has been successfully applied to wirelessly sense mechanical vibration and pressure. Unlike spiral inductor coils that lack mechanical stability, the inductor coils supported with polymer kirigami designs, comprising concentric circles with alternately connected hinges among the consecutive layers, offer exceptional mechanical stability. The wireless sensor shows a good linear response (Adj. R2 = 0.99) between the shift in resonant frequency as a function of extension. Moreover, the sensor device exhibits excellent cycling mechanical stability and minimal hysteresis, as confirmed by the experiments performed for over 5 d. An acceleration sensor (0-20 ms-2) with high linearity (Adj. R2 = 0.99) is introduced. Furthermore, a highly sensitive low-pressure sensor is demonstrated wirelessly in real time. Thus, the sensor can wirelessly monitor mechanical vibration and pressure. It can be applied for motion tracking, health monitoring, soft robotics, and deformation detection in battery-free deformable electronic devices.
RESUMEN
Polyimides, a widely used engineering plastic, require use of large amounts of toxic and hazardous organic solvents which threaten our daily lives, calling for new and easy synthetic methods for sustainable environmentally friendly development. In this paper, highly soluble fluorinated polyimides based on 4,4'-(hexafluoroisopropylidene) diphthalic anhydride were synthesized via hydrothermal process without using any toxic organic solvents and the advantages of the newly demonstrated synthetic methods are shown by comparative analysis performed with the two conventional synthetic methods using organic solvent: thermal and chemical imidization. Lower temperature is required (~200 °C) compared to thermal imidization and functional groups for high fusibility formed more easily compared to chemical imidization. According to the comparative analysis, hydrothermally synthesized PIs showed excellent solubility and maintained high thermal stability (>500 °C) and glass transition temperature (>300 °C) compared to conventional PI. The hydrothermally synthesized polyimide is much more convenient to store and manage than other form of polyimide which is much more stable when it is exposed to humidity as it is a powder form. The hydrothermal synthetic method is verified to be a "Green" and facile method for sustainable PI synthesis.