Vortex-based soft magnetic composite with ultrastable permeability up to gigahertz frequencies.

Soft magnetic materials with stable permeability up to hundreds of megahertz (MHz) are urgently needed for integrated transformers and inductors, which are crucial in the more-than-Moore era. However, traditional frequency-stable soft magnetic ferrites suffer from low saturation magnetization and temperature instability, making them unsuitable for integrated circuits. Herein, we fabricate a frequency-stable soft magnetic composite featuring a magnetic vortex structure via cold-sintering, where ultrafine FeSiAl particles are magnetically isolated and covalently bonded by Al2SiO5/SiO2/Fe2(MoO4)3 multilayered heterostructure. This construction results in an ultrastable permeability of 13 up to 1 gigahertz (GHz), relatively large saturation magnetization of 105 Am2/kg and low coercivity of 48 A/m, which we ascribe to the elimination of domain walls associated with almost uniform single-vortex structures, as observed by Lorentz transmission electron microscopy and reconstructed by micromagnetic simulation. Moreover, the ultimate compressive strength has been simultaneously increased up to 337.1 MPa attributed to the epitaxially grown interfaces between particles. This study deepens our understanding on the characteristics of magnetic vortices and provides alternative concept for designing integrated magnetic devices.

Atomic-scale observation of calcium occupation in spinel cobalt ferrite towards the regulation of intrinsic magnetic properties.

Spinel ferrites have drawn intensive attention because of their adjustable magnetic properties by ion doping, among which calcium (Ca) is an essential dopant that is widely employed in massive production. However, its exact lattice occupation and relationship with intrinsic magnetic properties remain unclear. Here, we successfully prepared Ca-doped cobalt ferrite (CoFe2O4) nanoparticles by electrospinning. Ca2+ is observed to occupy both the tetrahedral Fe site and the octahedral Co site using spherical aberration correction transmission electron microscopy (TEM) and prefers to occupy the octahedral site at a high doping level. Such dual occupation behavior affects the tetrahedral and octahedral sublattices differently, resulting in nonmonotonic saturation magnetization variation, reduced magnetocrystalline anisotropy and negative magnetization in the zero field cooling (ZFC) process. By controlling the Ca doping amount, increased saturation magnetization and reduced coercivity can be obtained simultaneously. Our findings establish the relationship between the atomic-scale structural change and the macroscopic magnetic properties of spinel ferrites, promoting the development of new ferrite materials.

Different responses of soil fungal and bacterial communities to nitrogen addition in a forest grassland ecotone.

Introduction: Continuous nitrogen deposition increases the nitrogen content of terrestrial ecosystem and affects the geochemical cycle of soil nitrogen. Forest-grassland ecotone is the interface area of forest and grassland and is sensitive to global climate change. However, the structure composition and diversity of soil microbial communities and their relationship with soil environmental factors at increasing nitrogen deposition have not been sufficiently studied in forest-grassland ecotone. Methods: In this study, experiments were carried out with four nitrogen addition treatments (0 kgN·hm-2·a-1, 10 kgN·hm-2·a-1, 20 kgN·hm-2·a-1 and 40 kgN·hm-2·a-1) to simulate nitrogen deposition in a forest-grassland ecotone in northwest Liaoning Province, China. High-throughput sequencing and qPCR technologies were used to analyze the composition, structure, and diversity characteristics of the soil microbial communities under different levels of nitrogen addition. Results and discussion: The results showed that soil pH decreased significantly at increasing nitrogen concentrations, and the total nitrogen and ammonium nitrogen contents first increased and then decreased, which were significantly higher in the N10 treatment than in other treatments (N:0.32 ~ 0.48 g/kg; NH4+-N: 11.54 ~ 13 mg/kg). With the increase in nitrogen concentration, the net nitrogen mineralization, nitrification, and ammoniation rates decreased. The addition of nitrogen had no significant effect on the diversity and structure of the fungal community, while the diversity of the bacterial community decreased significantly at increasing nitrogen concentrations. Ascomycetes and Actinomycetes were the dominant fungal and bacterial phyla, respectively. The relative abundance of Ascomycetes was negatively correlated with total nitrogen content, while that of Actinomycetes was positively correlated with soil pH. The fungal community diversity was significantly negatively correlated with nitrate nitrogen, while the diversity of the bacterial community was significantly positively correlated with soil pH. No significant differences in the abundance of functional genes related to soil nitrogen transformations under the different treatments were observed. Overall, the distribution pattern and driving factors were different in soil microbial communities in a forest-grassland ecotone in northwest Liaoning. Our study enriches research content related to factors that affect the forest-grassland ecotone.

Dzyaloshinskii-Moriya-Interaction-Like Behavior in Confined Permalloy Nanostructures via Coupled Magnetic Vortices.

Dzyaloshinskii-Moriya interaction (DMI), one of antisymmetric exchanges, originates from the combination of low structural symmetry and large spin-orbit coupling and favors magnetization rotations with fixed chirality. Herein, this work reports a DMI-like behavior in permalloy via coupled vortices in confined structures. Under the in-plane magnetic fields, continuous reversals of different coupled vortices are directly observed by in situ Lorentz transmission electron microscopy, and reproduced by complementary micromagnetic simulations. The statistical results show that coupled vortices with opposite chirality appear more frequently with the frequency up to about 60%. Such an asymmetric phenomenon mainly arises from a DMI-like behavior, associated with the increased total energy difference between different ground-state coupled vortices. Moreover, in the reversal process, the junction between disks accelerates the annihilation of vortices moving toward it and is also the starting point of vortex nucleation. These results provide an effective method to generate a DMI-like behavior in magnetic systems with symmetry breaking surface and benefit the future development of vortex-based spintronic devices.

A literature review of current technologies on health data integration for patient-centered health management.

Health data integration enables a collaborative utilization of data across different systems. It not only provides a comprehensive view of a patient's health but can also potentially cope with challenges faced by the current healthcare system. In this literature review, we investigated the existing work on heterogeneous health data integration as well as the methods of utilizing the integrated health data. Our search was narrowed down to 32 articles for analysis. The integration approaches in the reviewed articles were classified into three classifications, and the utilization approaches were classified into five classifications. The topic of health data integration is still under debate and problems are far from being resolved. This review suggests the need for a more efficient way to invoke the various services for aggregating health data, as well as a more effective way to integrate the aggregated health data for supporting collaborative utilization. We have found that the combination of Web Application Programming Interface and Semantic Web technologies has the potential to cope with the challenges based on our analysis of the review result.

Characterization of biomechanical properties of cells through dielectrophoresis-based cell stretching and actin cytoskeleton modeling.

BACKGROUND: Cytoskeleton is a highly dynamic network that helps to maintain the rigidity of a cell, and the mechanical properties of a cell are closely related to many cellular functions. This paper presents a new method to probe and characterize cell mechanical properties through dielectrophoresis (DEP)-based cell stretching manipulation and actin cytoskeleton modeling. METHODS: Leukemia NB4 cells were used as cell line, and changes in their biological properties were examined after chemotherapy treatment with doxorubicin (DOX). DEP-integrated microfluidic chip was utilized as a low-cost and efficient tool to study the deformability of cells. DEP forces used in cell stretching were first evaluated through computer simulation, and the results were compared with modeling equations and with the results of optical stretching (OT) experiments. Structural parameters were then extracted by fitting the experimental data into the actin cytoskeleton model, and the underlying mechanical properties of the cells were subsequently characterized. RESULTS: The DEP forces generated under different voltage inputs were calculated and the results from different approaches demonstrate good approximations to the force estimation. Both DEP and OT stretching experiments confirmed that DOX-treated NB4 cells were stiffer than the untreated cells. The structural parameters extracted from the model and the confocal images indicated significant change in actin network after DOX treatment. CONCLUSION: The proposed DEP method combined with actin cytoskeleton modeling is a simple engineering tool to characterize the mechanical properties of cells.

Chemically Inhomogeneous RE-Fe-B Permanent Magnets with High Figure of Merit: Solution to Global Rare Earth Criticality.

The global rare earth (RE) criticality, especially for those closely-relied Nd/Pr/Dy/Tb in the 2:14:1-typed permanent magnets (PMs), has triggered tremendous attempts to develop new alternatives. Prospective candidates La/Ce with high abundance, however, cannot provide an equivalent performance due to inferior magnetic properties of (La/Ce)2Fe14B to Nd2Fe14B. Here we report high figure-of-merit La/Ce-rich RE-Fe-B PMs, where La/Ce are inhomogeneously distributed among the 2:14:1 phase. The resultant exchange coupling within an individual grain and magnetostatic interactions across grains ensure much superior performance to the La/Ce homogeneously distributed magnet. Maximum energy product (BH)max of 42.2 MGOe is achieved even with 36 wt. % La-Ce incorporation. The cost performance, (BH)max/cost, has been raised by 27.1% compared to a 48.9 MGOe La/Ce-free commercial magnet. The construction of chemical heterogeneity offers recipes to develop commercial-grade PMs using the less risky La/Ce, and also provides a promising solution to the REs availability constraints.

Manipulating Ce Valence in RE2Fe14B Tetragonal Compounds by La-Ce Co-doping: Resultant Crystallographic and Magnetic Anomaly.

Abundant and low-cost Ce has attracted considerable interest as a prospective alternative for those critically relied Nd/Pr/Dy/Tb in the 2:14:1-type permanent magnets. The (Nd, Ce)2Fe14B compound with inferior intrinsic magnetic properties to Nd2Fe14B, however, cannot provide an equivalent magnetic performance. Since Ce valence is sensitive to local steric environment, manipulating it towards the favorable trivalent state provides a way to enhance the magnetic properties. Here we report that such a desirable Ce valence can be induced by La-Ce co-doping into [(Pr, Nd)1-x(La, Ce)x]2.14Fe14B (0 ≤ x ≤ 0.5) compounds via strip casting. As verified by X-ray photoelectron spectroscopy results, Ce valence shifts towards the magnetically favorable Ce(3+) state in the composition range of x > 0.3, owing to the co-doping of large radius La(3+) into 2:14:1 phase lattice. As a result, both crystallographic and magnetic anomalies are observed in the same vicinity of x = 0.3, above which lattice parameters a and c, and saturation magnetization Ms increase simultaneously. Over the whole doping range, 2:14:1 tetragonal structure forms and keeps stable even at 1250 K. This finding may shed light on obtaining a favorable Ce valence via La-Ce co-doping, thus maintaining the intrinsic magnetic properties of 2:14:1-type permanent magnets.

Structural, electron transportation and magnetic behavior transition of metastable FeAlO granular films.

Metal-insulator granular film is technologically important for microwave applications. It has been challenging to obtain simultaneous high electrical resistivity and large saturation magnetization due to the balance of insulating non-magnetic and metallic magnetic components. FeAlO granular films satisfying both requirements have been prepared by pulsed laser deposition. The as-deposited film exhibits a high resistivity of 3700 µΩ∙cm with a negative temperature coefficient despite that Fe content (0.77) exceeds the percolation threshold. This originates from its unique microstructure containing amorphous Fe nanoparticles embedded in Al2O3 network. By optimizing the annealing conditions, superior electromagnetic properties with enhanced saturation magnetization (>1.05 T), high resistivity (>1200 µΩ∙cm) and broadened Δf (>3.0 GHz) are obtained. Phase separation with Al2O3 aggregating as inclusions in crystallized Fe(Al) matrix is observed after annealing at 673 K, resulting in a metallic-like resistivity. We provide a feasible way to achieve both high resistivity and large saturation magnetization for the FeAlO films with dominating metallic component and show that the microstructure can be tuned for desirable performance.