Rapid reconfiguration of cortical networks after repeated exposure to visual-vestibular conflicts.

Visual-vestibular conflicts can induce motion sickness and further postural instability. Visual-vestibular habituation is recommended to reduce the symptoms of motion sickness and improve postural stability with an altered multisensory reweighting progress. However, it is unclear how the human brain reweights multisensory information after repeated exposure to visual-vestibular conflicts. Therefore, we synchronized a rotating platform and a virtual scene to present visual-vestibular congruent (natural visual stimulation) and incongruent (conflicted visual stimulation) conditions and collected EEG and center of pressure (COP) data. We constructed the effective brain connectivity of region of interest (ROI) derived from source-space EEG in theta-band activity, and quantified the postural stability and the inflow and outflow of each ROI. We found repeated exposure to congruent and incongruent conditions both decreased COP path length and increased COP complexity. Besides, we found that repeated exposure to the incongruent environment decreased the inflow into visual cortex, suggesting the brain down-weighted the less reliable visual information for postural stability. In contrast, repeated exposure to the congruent environment increased the inflow into posterior parietal cortex and the outflow from visual cortex and S1, suggesting an increase in efficiency of multisensory integration. We concluded that repeated exposure to congruent and incongruent conditions both improved postural stability with different multisensory reweighting patterns as revealed by different dynamic changes of brain networks.

Turning Non-Sticking Surface into Sticky Surface: Correlation between Surface Topography and Contact Angle Hysteresis.

We present a surface modification technique that turns CuNi foam films with a high contact angle and non-sticking property into a sticky surface. By decorating with mesh-like biaxially oriented polypropylene (BOPP) and adjusting the surface parameters, the surface exhibits water-retaining capability even when being held upside down. The wetting transition process of droplets falling on its surface were systematically studied using the finite element simulation method. It is found that the liquid filled the surface microstructure and curvy three-phase contact line. Moreover, we experimentally demonstrated that this surface can be further applied to capture underwater air bubbles.

Nonlinear dynamics of postural control system under visual-vestibular habituation balance practice: evidence from EEG, EMG and center of pressure signals.

Human postural control system is inherently complex with nonlinear interaction among multiple subsystems. Accordingly, such postural control system has the flexibility in adaptation to complex environments. Previous studies applied complexity-based methods to analyze center of pressure (COP) to explore nonlinear dynamics of postural sway under changing environments, but direct evidence from central nervous system or muscular system is limited in the existing literature. Therefore, we assessed the fractal dimension of COP, surface electromyographic (sEMG) and electroencephalogram (EEG) signals under visual-vestibular habituation balance practice. We combined a rotating platform and a virtual reality headset to present visual-vestibular congruent or incongruent conditions. We asked participants to undergo repeated exposure to either congruent (n = 14) or incongruent condition (n = 13) five times while maintaining balance. We found repeated practice under both congruent and incongruent conditions increased the complexity of high-frequency (0.5-20 Hz) component of COP data and the complexity of sEMG data from tibialis anterior muscle. In contrast, repeated practice under conflicts decreased the complexity of low-frequency (<0.5 Hz) component of COP data and the complexity of EEG data of parietal and occipital lobes, while repeated practice under congruent environment decreased the complexity of EEG data of parietal and temporal lobes. These results suggested nonlinear dynamics of cortical activity differed after balance practice under congruent and incongruent environments. Also, we found a positive correlation (1) between the complexity of high-frequency component of COP and the complexity of sEMG signals from calf muscles, and (2) between the complexity of low-frequency component of COP and the complexity of EEG signals. These results suggested the low- or high-component of COP might be related to central or muscular adjustment of postural control, respectively.

Effects of non-extensible lumbar belts on static and dynamic postural stability.

BACKGROUND: Previous studies have found that increased intra-abdominal pressure helps to reduce spinal loading and improve spine stability. Non-extensible lumbar belts (NEBs) could elevate intra-abdominal pressure and augment spinal stability. NEBs have been used in the healthcare field to help reduce pain and improve spine function for people with low back pain. However, the effect of NEBs on static and dynamic postural stability is not clear. METHODS: This study aimed to investigate whether NEBs affect static and dynamic postural stability. Twenty-eight healthy male subjects were recruited to finish four static postural stability tasks and two dynamic postural stability tests. Center of pressure (COP) values during 30 s of quiet standing, dynamic postural stability index (DPSI) and Y balance test (YBT) score with and without NEBs were analyzed. RESULTS: NEBs had no significant effect in all COP variables in the static postural tasks. The results of a repeated measure two-way ANOVA indicated the NEBs significantly improved the dynamic postural stability in YBT score and DPSI (F (1,27) = 5.506, p = .027, [Formula: see text] and F (1,27) = 83.94, p = .000, [Formula: see text] respectively). CONCLUSIONS: The study results indicate that non-extensible belts improve dynamic stability in healthy male participants, with potential implications for rehabilitation and performance enhancement programs.

A Comparison between Porous to Fully Dense Electrodeposited CuNi Films: Insights on Electrochemical Performance.

Nanostructuring of metals is nowadays considered as a promising strategy towards the development of materials with enhanced electrochemical performance. Porous and fully dense CuNi films were electrodeposited on a Cu plate by electrodeposition in view of their application as electrocatalytic materials for the hydrogen evolution reaction (HER). Porous CuNi film were synthesized using the hydrogen bubble template electrodeposition method in an acidic electrolyte, while fully dense CuNi were electrodeposited from a citrate-sulphate bath with the addition of saccharine as a grain refiner. The prepared films were characterized chemically and morphologically by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). The Rietveld analysis of the XRD data illustrates that both CuNi films have a nanosized crystallite size. Contact angle measurements reveal that the porous CuNi film exhibits remarkable superhydrophobic behavior, and fully dense CuNi film shows hydrophilicity. This is predominately ascribed to the surface roughness of the two films. The HER activity of the two prepared CuNi films were investigated in 1 M KOH solution at room temperature by polarization measurements and electrochemical impedance spectroscopy (EIS) technique. Porous CuNi exhibits an enhanced catalysis for HER with respect to fully dense CuNi. The HER kinetics for porous film is processed by the Volmer-Heyrovsky reaction, whereas the fully dense counterpart is Volmer-limited. This study presents a clear comparison of HER behavior between porous and fully dense CuNi films.

Linear spectrum and non-linear complexity features of lumbar muscle surface electromyography between people with and without non-specific chronic low back pain during Biering-Sorensen test.

PURPOSE: This study aimed to investigate the electromyographic parameters of lumbar muscles during the Biering-Sorensen test (BST) in people with and without non-specific chronic low back pain (NCLBP). MATERIALS AND METHODS: Thirteen healthy controls and thirteen NCLBP patients participated in the current study, where they performed the 90s-BST, while the surface electromyography (sEMG) was recorded from the erector spinae (ES) at L1 and L3 level and lumbar multifidus (LM) at L5 level, bilaterally. Spectral and nonlinear analyses were applied by calculating mean power frequency (MPF), fractal dimension (FD) and the percentage of determinism (%DET) in the 10-second non-overlapping time-windows and EMG-EMG coherence during the first half and second half of the BST. Also, the slopes of the linear fitting curves of MPF, FD and %DET were calculated. RESULTS: NCLBP group had significantly lower rates of changes in MPF, FD and %DET compared to asymptomatic controls in the ES(L3) and LM. Coherence in left-right LM and in the right ES-LM increased significantly in the gamma band in the Control group with no increase in the NCLBP group. CONCLUSIONS: Our findings indicated that compared to people with NCLBP, the sEMG signals of lumbar muscles of people without NCLBP were more regular and less complex during the 90s-BST.

Combination of Micelle Collapse and CuNi Surface Dissolution for Electrodeposition of Magnetic Freestanding Chitosan Film.

Magnetic chitosan hydrogel has aroused immense attention in recent years due to their biomedical significance and magnetic responsiveness. Here, A new electrodeposition method is reported for the fabrication of a novel CuNi-based magnetic chitosan freestanding film (MCFF) in an acidic chitosan plating bath containing SDS-modified CuNi NPs. Contrary to chitosan's anodic and cathodic deposition, which typically involves electrochemical oxidation, the synthetic process is triggered by coordination of chitosan with Cu and Ni ions in situ generated by the controlled surface dissolution of the suspended NPs with the acidic plating bath. The NPs provide not only the ions required for chitosan growth but also become entrapped during electrodeposition, thereby endowing the composite with magnetic properties. The obtained MCFF offers a wide range of features, including good mechanical strength, magnetic properties, homogeneity, and morphological transparency. Besides the fundamental interest of the synthesis itself, sufficient mechanical strength ensures that the hydrogel can be used by either peeling it off of the electrode or by directly building a complex hydrogel electrode. Its fast and easy magnetic steering, separation and recovery, large surface area, lack of secondary pollution, and strong chelating capability could lead to it finding applications as an electrochemical detector or adsorbent.

A CuNi-Loaded Porous Magnetic Soft Material: Preparation, Characterization and Magnetic Field-Controlled Modulus.

Novel porous magnetic soft materials (pMSMs) based on a poly (vinyl alcohol) (PVA) porous matrix filled with CuNi nanoparticles (NPs) of around 70 nm were synthesized. Initially, magnetic CuNi NPs were fabricated by the reduction of Ni and Cu ions with hydrazine hydrate in ethylene glycol medium in the absence of other capping agents. The pMSMs are subsequently fabricated by mixing CuNi NPs and PVA through freezing-drying process. The as-obtained pMSMs can respond to a magnetic field, i.e., the compressive modulus increase under a magnetic field of 0.23 T. The experimental results indicate that CuNi NPs can easily move to form chain-like structures under the application of a magnetic field. A combination of direct observation and finite element modeling has shown that under the influence of a magnetic field, chain-like aggregates of CuNi NPs lead to self-reinforcement of the pMSMs and, thus, to the increased compressive modulus. From a technological point of view, these materials with good magnetic responsiveness and moderate mechanical strength have potential applications in artificial muscle, soft actuators and drug release, to name a few.

Comparison of Distance and Angular Analysis for Measurement of Hamstring Flexibility in Preschoolers.

The study aimed to (1) investigate the reliability and usefulness of a proposed angular analysis during a modified sit-and-reach (MSR) test, and (2) compare the proposed MSR angular analysis and the commonly used MSR distance to verify the influence of the anthropometric characteristics in preschoolers. 194 preschoolers participated in the study. Before testing, the anthropometric characteristics were collected. Each participant performed the MSR test twice. The MSR distance score was obtained from the starting point to the reaching point, while the MSR angle score was calculated according to the approximate hip flexion angle. Both the relative and absolute reliability were good for the angular analysis during an MSR test in preschoolers (ICC ranging from 0.82 to 0.91, CV% ranging from 8.21 to 9.40). The angular analysis demonstrated good usefulness, with a lower typical error than the smallest worthwhile change in 3- and 5-year-old groups. The MSR angle scores could eliminate the concern of the influence of anthropometric characteristics, while MSR distance and anthropometric characteristics (i.e., sitting height and arm length) were found to be weakly correlated. In conclusion, the angular analysis when performing the MSR test is reliable and appears to eliminate the concern regarding the limb length bias.

A Calculation Model for Cooling Rate of Aluminum Alloy Melts during Continuous Rheo-Extrusion.

The melt temperature of aluminum alloys plays a significant role in determining the microstructure characteristic during continuous rheo-extrusion. However, it is difficult to measure the actual melt temperature in the roll-shoe gap. In this work, based on the basic theory of heat transfer, a calculation model for heat transfer coefficient of cooling water/roll interface and melt/roll interface is established. In addition, the relationship between the temperature at the melt/roll interface and the velocity of cooling water is investigated. Combined with the CALPHAD calculation, the melt temperature during solidification in the continuous rheo-extrusion process is calculated. Using this model, the cooling rate of an Al-6Mg (wt.%) alloy melt prepared by continuous rheo-extrusion is estimated to be 10.3 K/s. This model used to determine the melt parameters during solidification provides a reference for optimizing the production process of continuous rheo-extrusion technology.

A facile template-assisted electrodeposition approach to porous Cu/Cu2O nanowires.

Although nanoporous materials have been fabricated by electrodeposition using micelles of P-123 as structure-directing entities, the possible geometry obtained has been limited to nanoporous films. Herein, a novel dual-template assisted electrodeposition method to fabricate Cu/Cu2O porous nanowires (PNs) using polymeric micelles as a soft template and polycarbonate membranes as a hard template is reported. These nanowires consist of a porous skeleton with nanosized pores of 20 nm on average and crystallized ligaments. Morphology, composition, and crystal structure are systematically investigated and the formation mechanism is discussed. The as-deposited Cu/Cu2O PNs are found to exhibit high electrocatalytic activity toward electroreduction of nitrate. At an applied cathodic potential of 0.53 V vs. the reference reversible hydrogen electrode, the selectivity for NH3 conversion is 37.3%. Our approach is anticipated to work for the synthesis of PNs of other materials that could be obtained via electrochemical means.

Electrochemically Fabricated Surface-Mesostructured CuNi Bimetallic Catalysts for Hydrogen Production in Alkaline Media.

Ni-based bimetallic films with 20 at.% and 45 at.% Cu and mesostructured surfaces were prepared by electrodeposition from an aqueous solution containing micelles of P123 triblock copolymer serving as a structure-directing agent. The pH value of the electrolytic solution had a key effect on both the resulting Cu/Ni ratio and the surface topology. The catalytic activity of the CuNi films toward hydrogen evolution reaction was investigated by cyclic voltammetry (CV) in 1 M KOH electrolyte at room temperature. The Cu45Ni55 film showed the highest activity (even higher than that of a non-mesostructured pure Ni film), which was attributed to the Ni content at the utmost surface, as demonstrated by CV studies, as well as the presence of a highly corrugated surface.