Ultrafiltered Sweet Buttermilk as Additive Replacer in Ice Cream Production.

Sweet buttermilk, a by-product of butter production, remains highly underutilized despite containing some relevant components (i.e., phospholipids) that may have a high biological value and may exert some positive technological functions. The aim of this study was to investigate the possibility of using ultrafiltered (UF) sweet buttermilk at different volume reduction ratios (3 and 5) to replace emulsifiers and/or stabilizers in the production of a novel clean-label ice cream formulation made with sweet buttermilk-based mixtures. The functional, thermo-rheological, and sensory profile of four types of ice creams was investigated. Increasing the degree of sweet buttermilk concentration positively influenced the overrun values and at the same time improved the ice cream's resistance to melting. Also, the thermo-rheological profile during melting was influenced by the presence of UF buttermilk. These differences in techno-functional properties were probably partly caused by the different total phospholipids content caused by UF buttermilk. Some sensory properties (i.e., structure, consistency) were positively related to the utilization of UF buttermilk, while aroma and taste were negatively influenced. This study demonstrated that UF buttermilk can be used as an additive replacer in ice cream production because it enhances the structural and rheological properties of the final product.

Heat-Induced Gelation of Chickpea and Faba Bean Flour Ingredients.

This study aimed to investigate the gelling behavior of faba bean (FB) and chickpea (CP) flour between 10 and 20% (w/w) concentration at pH 3.0, 5.0, and 7.0. Both sources formed at pH 3.0 and 5.0 self-standing gels with 12% (w/w) of flour, while 16% (w/w) of flour was required to obtain a gel at pH 7.0. During gelling between 40 and 70 °C, a sharp increase of the elastic modulus G' was observed in both flours, mainly due to water absorption and swelling of the starch, one of the major constituents in the ingredients. Increasing the temperature at 95 °C, G' increased due to the denaturation of globulins and therefore the exposure of their internal part, which allowed more hydrophobic interactions and the formation of the gel. After cooling, both FB and CP gels displayed a solid-like behavior (tan δ ranging between 0.11 and 0.18) with G' values at pH 3.0 and 5.0 significantly (p < 0.05) higher than those at pH 7.0, due to the lower electrostatic repulsions at pHs far from the isoelectric point. The rheological properties were supported by the water binding capacity values, confirming the better gels' strength described by rheological analysis. These results will enhance our understanding of the role of legume flours in formulating innovative and sustainable food products as alternatives to animal ones.

Impact of Combined Thermal Pressure Treatments on Physical Properties and Stability of Whey Protein Gel Emulsions.

Emulsion gels are gaining interest as fat replacers due to their benefits associated with calorie reduction and their versatility in a wide range of products. Their production process needs to be tailored to obtain the desired stability and physicochemical properties. This study investigated the effect of heat (70, 80, and 90 °C) and pressure (5, 10, and 15 MPa) to produce whey protein emulsion gels using a pilot-scale tubular heat exchanger equipped with a homogenization valve. Both temperature and pressure determined a significant effect (p < 0.05) on the rheological moduli, with the treated samples displaying a predominant elastic behavior. The treatments also showed an improved pseudoplasticity due to the significant reduction in the flow behavior index (p < 0.05). All the samples showed a bimodal particle size distribution; by increasing the temperature up to 80 °C, a reduction in Dv50 (50th percentile) values compared to the control samples was observed. At 90 °C, the Dv50 value increased because of coalescence and flocculation phenomena occurring during or immediately after processing. The greater aggregation and structural development obtained with stronger process conditions improved the stability of the emulsions. The results show the capability to produce gel emulsions with good physical properties that could be proposed as food ingredients to substitute fats in food products.

Comparison of physical, microstructural and antioxidative properties of pumpkin cubes cooked by conventional, vacuum cooking and sous vide methods.

BACKGROUND: Current dietary guidelines recommend five or more fruit, vegetable, and legume servings per day. Often, these products are eaten cooked, resulting in organoleptic and nutritional changes. Vacuum cooking is gaining attention as an alternative cooking technique, due to its ability to preserve or even enhance sensory and healthy properties of food. Its household application is, however, poorly explored. In this work, the effect of vacuum cooking, performed with a new patented system, was studied for the first time on pumpkin cubes and compared to sous vide and traditional steam cooking, through a multidisciplinary approach. RESULTS: All the cooking treatments damaged pumpkin microstructure, leading to cell separation and plasmolysis; vacuum cooking was the most aggressive method, as confirmed by texture softening. Vacuum cooking was also the method with less impact on pumpkin color, in relation to the largest extraction of some classes of carotenoids from the broken cells. Significant polyphenol extraction, especially of gallic acid and naringenin, was instead observed for sous vide and steamed pumpkins. The total antioxidant activity, ascribable to the effect of both carotenoids and polyphenols, resulted enhanced after cooking compared to raw one mainly for cook vide samples, followed by steamed and sous vide ones. CONCLUSIONS: Vacuum cooking, followed by sous vide, has often shown better performance than traditional steam cooking for pumpkin cubes. The implementation of sous vide and vacuum cooking at domestic level or in professional kitchens, and in the food industry, would allow the consumption of vegetables with improved nutritional and sensorial characteristics. © 2020 Society of Chemical Industry.

Impact of Ohmic Heating and High Pressure Processing on Qualitative Attributes of Ohmic Treated Peach Cubes in Syrup.

Stabilization of ohmic pretreated peach cubes (ohm) in syrup, representative of semifinished fruit products, was finalized by ohmic heating (OHM) and high pressure processing (HPP), proposed respectively as thermal and nonthermal pasteurization, in comparison to a conventional pasteurization treatment (DIM). The samples were then studied in terms of histological, physical (dimensional distribution, tenderometry, texture, viscosity of syrup and colour), chemical (total phenolic and ascorbic acid content), and sensorial (triangle test) properties. Severe modifications of the cell walls were observed in ohm-DIM and ohm-OHM samples, with swelling and electroporation, respectively. From chemical analyses, significant reduction of ascorbic acid and simultaneous increase of total phenolics content were observed for ohm-DIM and ohm-OHM, probably in relation to the cell wall damages. ohm-HPP showed the best preservation of the dimensional characteristics and hardness, followed by ohm-OHM and ohm-DIM. In addition, textural and colour parameters evidenced similar results, with ohm-HPP as the less different from ohm. Finally, the sensorial analysis confirmed ohm-HPP and ohm-OHM samples as the most similar to ohm as well as the most appreciated in terms of colour and consistency.

Improved Physicochemical and Structural Properties of Blueberries by High Hydrostatic Pressure Processing.

The use of high pressure on fruits and vegetables is today widely studied as an alternative to the traditional thermal preservation techniques, with the aim of better preserving nutritional and organoleptic properties. The use of high hydrostatic pressures (400-600 MPa; 1-5 min; room temperature) was tested on the physicochemical and structural properties of blueberries, in comparison to raw and blanched samples. High hydrostatic pressures led to higher tissue damages than blanching, related to the intensity of the treatment. The cellular damages resulted in leakage of intracellular components, such as bioactive molecules and enzymes. As a consequence, among the high pressure treatments, the resulting antioxidant activity was higher for samples treated for longer times (5 min). Pectinmethyl esterase (PME), deactivated by blanching, but strongly barotolerant, was more active in blueberries treated with the more intense high pressure conditions. Blueberry texture was better retained after high pressure than blanching, probably because of the PME effect. Blueberry color shifted towards purple tones after all of the treatments, which was more affected by blanching. Principal component analysis revealed the mild impact of high pressure treatments on the organoleptic properties of blueberries.

Investigation on temperature fields in industrial chilling of pork legs for PDO Parma ham production and coupled temperature/microbial growth simulation.

In the present work, temperature distribution within an industrial blast chiller with pork leg for Protected Designation of Origin Parma ham production was studied and the slowest cooling zone and the fastest cooling zone were recognized. Moreover, apparent heat transfer coefficients in both positions were calculated and resulted equal to 27.1 and 15.6 W m-2 °C-1, respectively. A finite element method model by distinguishing the three main components (skin, lean meat and bone) of the leg for the unsteady heat transfer during cooling was developed and validated against industrial chiller data. Good agreement between experimental and simulated data was obtained with RMSE value for thermal centre equal to 0.81 °C. Furthermore, in order to introduce CCP limit in the HACCP plan, a microbial growth model of the most important pathogens in meat was developed starting from the heat transfer model results. Temperature as well as pathogen growth were estimated in the case of different plant breakdowns. Defined CCP limit was represented by reaching 11 °C at 5 mm of depth within 2 h from the beginning of the cooling process, moreover a different cooling program was simulated and established as the alternative one.

Effects of alternative steeping methods on composition, antioxidant property and colour of green, black and oolong tea infusions.

Cold water steeping is reported to maximise tea health benefits, but requires long infusion time. In this work, the employment of a brief hot infusion step followed by ice addition was evaluated. The comparison of this innovative method with hot and cold steeping was investigated on green, black and oolong teas. Catechins, xanthines and gallic acid content, antioxidant power, total phenolics and colour analysis were evaluated. Hot infusion shown rapid extractive power, but relevant compound degradation. On the contrary, cold infusion extracted higher level of healthy molecules with slow kinetic. The innovative method achieved in short time similar properties of cold infusion in terms of antioxidant power. As for bioactive compounds, such as gallic acid and epigallocatechin gallate, highest values, about double than in hot infusion, were recorded for green and black teas. This steeping method may represent an alternative approach for industrial beverage preparation.

The effect of different convection cooking methods on the instrumental quality and yield of pork Longissimus dorsi.

The effect of different cooking methods (natural convection, NC, forced convection, FC and forced convection/steam combined, FC/S) on selected physical properties of cooked pork Longissimus dorsi samples were compared. FC/S treatment was significantly faster (∼19 min) than NC and FC cooking treatments (∼27 min). The overall cook values at the center of all samples (calculated taking into consideration the cooling phase) were comparable and might explain the similar tenderness found among samples that underwent significantly different thermal histories. The weight loss of the FC/S samples was significantly higher than in the other cooking methods while the color of the surface was paler than the NC and FC ones.