Fiber-taper collected emission from NV centers in high-Q/V diamond microdisks.

Fiber-coupled microdisks are a promising platform for enhancing the spontaneous emission from color centers in diamond. The measured cavity-enhanced emission from the microdisk is governed by the effective volume (V) of each cavity mode, the cavity quality factor (Q), and the coupling between the microdisk and the fiber. Here we observe room temperature photoluminescence from an ensemble of nitrogen-vacancy centers into high Q/V microdisk modes, which when combined with coherent spectroscopy of the microdisk modes, allows us to elucidate the relative contributions of these factors. The broad emission spectrum acts as an internal light source facilitating mode identification over several cavity free spectral ranges. Analysis of the fiber taper collected microdisk emission reveals spectral filtering both by the cavity and the fiber taper, the latter of which we find preferentially couples to higher-order microdisk modes. Coherent mode spectroscopy is used to measure Q ∼ 1 × 105 - the highest reported values for diamond microcavities operating at visible wavelengths. With realistic optimization of the microdisk dimensions, we predict that Purcell factors of ∼50 are within reach.

Semiconductor-on-diamond cavities for spin optomechanics.

Optomechanical cavities are powerful tools for classical and quantum information processing that can be realized using nanophotonic structures that co-localize optical and mechanical resonances. Typically, phononic localization requires suspended devices that forbid vertical leakage of mechanical energy. Achieving this in some promising quantum photonic materials such as diamond requires non-standard nanofabrication techniques, while hindering integration with other components and exacerbating heating related challenges. As an alternative, we have developed a semiconductor-on-diamond platform that co-localizes phononic and photonic modes without requiring undercutting. We have designed an optomechanical crystal cavity that combines high optomechanical coupling with low dissipation, and we show that this platform will enable optomechanical coupling to spin qubits in the diamond substrate. These properties demonstrate the promise of this platform for realizing quantum information processing devices based on spin, phonon, and photon interactions.

Processing light with an optically tunable mechanical memory.

Mechanical systems are one of the promising platforms for classical and quantum information processing and are already widely-used in electronics and photonics. Cavity optomechanics offers many new possibilities for information processing using mechanical degrees of freedom; one of them is storing optical signals in long-lived mechanical vibrations by means of optomechanically induced transparency. However, the memory storage time is limited by intrinsic mechanical dissipation. More over, in-situ control and manipulation of the stored signals processing has not been demonstrated. Here, we address both of these limitations using a multi-mode cavity optomechanical memory. An additional optical field coupled to the memory modifies its dynamics through time-varying parametric feedback. We demonstrate that this can extend the memory decay time by an order of magnitude, decrease its effective mechanical dissipation rate by two orders of magnitude, and deterministically shift the phase of a stored field by over 2π. This further expands the information processing toolkit provided by cavity optomechanics.

Two-colour interferometry and switching through optomechanical dark mode excitation.

Efficient switching and routing of photons of different wavelengths is a requirement for realizing a quantum internet. Multimode optomechanical systems can solve this technological challenge and enable studies of fundamental science involving widely separated wavelengths that are inaccessible to single-mode optomechanical systems. To this end, we demonstrate interference between two optomechanically induced transparency processes in a diamond on-chip cavity. This system allows us to directly observe the dynamics of an optomechanical dark mode that interferes photons at different wavelengths via their mutual coupling to a common mechanical resonance. This dark mode does not transfer energy to the dissipative mechanical reservoir and is predicted to enable quantum information processing applications that are insensitive to mechanical decoherence. Control of the dark mode is also utilized to demonstrate all-optical, two-colour switching and interference with light separated by over 5 THz in frequency.

Optomechanical detection of light with orbital angular momentum.

We present the design of an optomechanical device that allows sensitive transduction of the orbital angular momentum of light. An optically induced twist imparted on the device is detected using a photonic crystal cavity optomechanical system. This device allows the measurement of the orbital angular momentum of light when photons are absorbed by the mechanical element or the detection of the presence of photons when they are scattered into new orbital angular momentum states by a sub-wavelength grating patterned on the device. Such a system allows the detection of optical pulses with an l = 1 orbital angular momentum field that have an average photon number of 3.9 × 103 at a 5 MHz repetition rate, assuming that detector noise is not limiting measurement sensitivity. This scheme can be extended to higher order orbital angular momentum states.

Curvature Dependence of the Mass Accommodation Coefficient.

Mass accommodation coefficient, a parameter that captures molecular transport phenomena at liquid-vapor interfaces, is essential for predicting the growth of liquid droplets during condensation processes but is difficult to obtain experimentally. Molecular simulations have been widely used to obtain accommodation coefficients for planar interfaces, but the applicability of planar accommodation coefficients to the high-curvature interfaces present in very small droplets is not clear. In this work, molecular dynamics simulations are used to compute equilibrium mass accommodation coefficients at different temperatures for small droplets of various fluids, including Lennard-Jones and Buckingham fluids, benzene, butane, methane, methanol, and water. For all fluids studied, the mass accommodation coefficient increases with droplet size to a constant limiting value and decreases with temperature. Furthermore, the accommodation coefficient curvature dependence collapses onto a universal curve when appropriately scaled.

Hexagonal Boron Nitride Cavity Optomechanics.

Hexagonal boron nitride (hBN) is an emerging layered material that plays a key role in a variety of two-dimensional devices, and has potential applications in nanophotonics and nanomechanics. Here, we demonstrate the first cavity optomechanical system incorporating hBN. Nanomechanical resonators consisting of hBN beams with average dimensions of 12 µm × 1.2 µm × 28 nm and minimum predicted thickness of 8 nm were fabricated using electron beam induced etching and positioned in the optical near-field of silicon microdisk cavities. Of the multiple devices studied here a maximum 0.16 pm/[Formula: see text] sensitivity to the hBN nanobeam motion is demonstrated, allowing observation of thermally driven mechanical resonances with frequencies between 1 and 23 MHz, and largest mechanical quality factor of 1100 for a 23 MHz mode, at room temperature in high vacuum. In addition, the role of air damping is studied via pressure dependent measurements. Our results constitute an important step toward realizing integrated optomechanical circuits employing hBN.

Are there optical communication channels in the brain?

Despite great progress in neuroscience, there are still fundamental unanswered questions about the brain, including the origin of subjective experience and consciousness. Some answers might rely on new physical mechanisms. Given that biophotons have been discovered in the brain, it is interesting to explore if neurons use photonic communication in addition to the well-studied electro-chemical signals. Such photonic communication in the brain would require waveguides. Here we review recent work (S. Kumar, K. Boone, J. Tuszynski, P. Barclay, and C. Simon, Scientific Reports 6, 36508 (2016)) suggesting that myelinated axons could serve as photonic waveguides. The light transmission in the myelinated axon was modeled, taking into account its realistic imperfections, and experiments were proposed both in vivo and in vitro to test this hypothesis. Potential implications for quantum biology are discussed.

Nanocavity optomechanical torque magnetometry and radiofrequency susceptometry.

Nanophotonic optomechanical devices allow the observation of nanoscale vibrations with a sensitivity that has dramatically advanced the metrology of nanomechanical structures and has the potential to impact studies of nanoscale physical systems in a similar manner. Here we demonstrate this potential with a nanophotonic optomechanical torque magnetometer and radiofrequency (RF) magnetic susceptometer. Exquisite readout sensitivity provided by a nanocavity integrated within a torsional nanomechanical resonator enables observations of the unique net magnetization and RF-driven responses of single mesoscopic magnetic structures in ambient conditions. The magnetic moment resolution is sufficient for the observation of Barkhausen steps in the magnetic hysteresis of a lithographically patterned permalloy island. In addition, significantly enhanced RF susceptibility is found over narrow field ranges and attributed to thermally assisted driven hopping of a magnetic vortex core between neighbouring pinning sites. The on-chip magnetosusceptometer scheme offers a promising path to powerful integrated cavity optomechanical devices for the quantitative characterization of magnetic micro- and nanosystems in science and technology.

Fluid-fluid interfacial mobility from random walks.

Dual control volume grand canonical molecular dynamics is used to perform the first calculation of fluid-fluid interfacial mobilities. The mobility is calculated from one-dimensional random walks of the interface by relating the diffusion coefficient to the interfacial mobility. Three different calculation methods are employed: one using the interfacial position variance as a function of time, one using the mean-squared interfacial displacement, and one using the time-autocorrelation of the interfacial velocity. The mobility is calculated for two liquid-liquid interfaces and one liquid-vapor interface to examine the robustness of the methods. Excellent agreement between the three calculation methods is shown for all the three interfaces, indicating that any of them could be used to calculate the interfacial mobility.

Effects of fabrication methods on spin relaxation and crystallite quality in Tm-doped Y3AI5O12 powders studied using spectral hole burning.

High-quality rare-earth-ion (REI) doped materials are a prerequisite for many applications such as quantum memories, ultra-high-resolution optical spectrum analyzers and information processing. Compared to bulk materials, REI doped powders offer low-cost fabrication and a greater range of accessible material systems. Here we show that crystal properties, such as nuclear spin lifetime, are strongly affected by mechanical treatment, and that spectral hole burning can serve as a sensitive method to characterize the quality of REI doped powders. We focus on the specific case of thulium doped Y3AI5O12 (Tm:YAG). Different methods for obtaining the powders are compared and the influence of annealing on the spectroscopic quality of powders is investigated on a few examples. We conclude that annealing can reverse some detrimental effects of powder fabrication and, in certain cases, the properties of the bulk material can be reached. Our results may be applicable to other impurities and other crystals, including color centers in nano-structured diamond.

Possible existence of optical communication channels in the brain.

Given that many fundamental questions in neuroscience are still open, it seems pertinent to explore whether the brain might use other physical modalities than the ones that have been discovered so far. In particular it is well established that neurons can emit photons, which prompts the question whether these biophotons could serve as signals between neurons, in addition to the well-known electro-chemical signals. For such communication to be targeted, the photons would need to travel in waveguides. Here we show, based on detailed theoretical modeling, that myelinated axons could serve as photonic waveguides, taking into account realistic optical imperfections. We propose experiments, both in vivo and in vitro, to test our hypothesis. We discuss the implications of our results, including the question whether photons could mediate long-range quantum entanglement in the brain.

Diamond photonics platform enabled by femtosecond laser writing.

Diamond is a promising platform for sensing and quantum processing owing to the remarkable properties of the nitrogen-vacancy (NV) impurity. The electrons of the NV center, largely localized at the vacancy site, combine to form a spin triplet, which can be polarized with 532 nm laser light, even at room temperature. The NV's states are isolated from environmental perturbations making their spin coherence comparable to trapped ions. An important breakthrough would be in connecting, using waveguides, multiple diamond NVs together optically. However, still lacking is an efficient photonic fabrication method for diamond akin to the photolithographic methods that have revolutionized silicon photonics. Here, we report the first demonstration of three dimensional buried optical waveguides in diamond, inscribed by focused femtosecond high repetition rate laser pulses. Within the waveguides, high quality NV properties are observed, making them promising for integrated magnetometer or quantum information systems on a diamond chip.

Mass-flow-rate-controlled fluid flow in nanochannels by particle insertion and deletion.

A nonequilibrium molecular dynamics method to induce fluid flow in nanochannels, the insertion-deletion method (IDM), is introduced. IDM inserts and deletes particles within distinct regions in the domain, creating locally high and low pressures. The benefits of IDM are that it directly controls a physically meaningful quantity, the mass flow rate, allows for pressure and density gradients to develop in the direction of flow, and permits treatment of complex aperiodic geometries. Validation of IDM is performed, yielding good agreement with the analytical solution of Poiseuille flow in a planar channel. Comparison of IDM to existing methods indicates that it is best suited for gases, both because it intrinsically accounts for compressibility effects on the flow and because the computational cost of particle insertion is lowest for low-density fluids.

High-Q/V Monolithic Diamond Microdisks Fabricated with Quasi-isotropic Etching.

Optical microcavities enhance light-matter interactions and are essential for many experiments in solid state quantum optics, optomechanics, and nonlinear optics. Single crystal diamond microcavities are particularly sought after for applications involving diamond quantum emitters, such as nitrogen vacancy centers, and for experiments that benefit from diamond's excellent optical and mechanical properties. Light-matter coupling rates in experiments involving microcavities typically scale with Q/V, where Q and V are the microcavity quality-factor and mode-volume, respectively. Here we demonstrate that microdisk whispering gallery mode cavities with high Q/V can be fabricated directly from bulk single crystal diamond. By using a quasi-isotropic oxygen plasma to etch along diamond crystal planes and undercut passivated diamond structures, we create monolithic diamond microdisks. Fiber taper based measurements show that these devices support TE- and TM-like optical modes with Q > 1.1 × 10(5) and V < 11(λ/n) (3) at a wavelength of 1.5 µm.

Optical design of split-beam photonic crystal nanocavities.

We design high-quality-factor photonic crystal nanobeam cavities formed by two mechanically isolated cantilevers. These "split-beam" cavities have a physical gap at the center, allowing mechanical excitations of one or both of the cavity halves. They are designed by analyzing the optical band structures and mode profiles of waveguides perforated by elliptical holes and rectangular gaps and are predicted to support optical resonances with quality factors exceeding 10(6) at wavelengths of ~1.6 µm.

Discovery of novel hepatoselective HMG-CoA reductase inhibitors for treating hypercholesterolemia: a bench-to-bedside case study on tissue selective drug distribution.

The design of drugs with selective tissue distribution can be an effective strategy for enhancing efficacy and safety, but understanding the translation of preclinical tissue distribution data to the clinic remains an important challenge. As part of a discovery program to identify next generation liver selective HMG-CoA reductase inhibitors we report the identification of (3R,5R)-7-(4-((3-fluorobenzyl)carbamoyl)-5-cyclopropyl-2-(4-fluorophenyl)-1H-imidazol-1-yl)-3,5-dihydroxyheptanoic acid (26) as a candidate for treating hypercholesterlemia. Clinical evaluation of 26 (PF-03491165), as well as the previously reported 2 (PF-03052334), provided an opportunity for a case study comparison of the preclinical and clinical pharmacokinetics as well as pharmacodynamics of tissue targeted HMG-CoA reductase inhibitors.

Lipoatrophy in GH deficient patients treated with a long-acting pegylated GH.

OBJECTIVE: Changes observed during adult GH deficiency (GHD) are most often reversed with the administration of recombinant human GH (rhGH). To avoid daily injections, a long-acting GH molecule has been obtained by covalent binding of polyethylene glycol (PEG) with rhGH (PEG-GH), allowing weekly s.c. injections. This study was designed to assess its efficacy and safety, in adult GHD subjects. DESIGN AND METHODS: This was a randomized, double-blind, placebo-controlled, multiple-dose, parallel group study. Subjects were recruited from 34 centers. A total of 105 subjects with GHD were assigned a treatment. They received 6 weekly injections of either PEG-GH or placebo. Subjects were randomized into one out of four treatment groups (Groups A-D) or placebo (Group E). Groups A, B, and C received 1, 3, and 4 mg PEG-GH respectively, for the first 3 weeks followed by 2, 6, and 8 mg PEG-GH respectively, for the remaining 3 weeks. Group D received 4 mg PEG-GH for 6 weeks. Group E received placebo. The study was suspended because of the development of lipoatrophy in certain subjects and restarted with an injection rotation plan, before being terminated due to further subjects developing lipoatrophy. RESULTS: A total of 13 cases of injection-site lipoatrophy were reported, of which ten were in females and three occurred after the first injection; all cases were independent of PEG-GH dose or IGF1 levels, either basal or under treatment. CONCLUSION: The unpredictable occurrence of injection-site lipoatrophy with weekly long-acting pegylated GH molecules may be a limiting factor for their development.

Hybrid photonic crystal cavity and waveguide for coupling to diamond NV-centers.

A design for an ultra-high Q photonic crystal nanocavity engineered to interact with nitrogen-vacancy (NV) centers located near the surface of a single crystal diamond sample is presented. The structure is based upon a nanowire photonic crystal geometry, and consists of a patterned high refractive index thin film, such as gallium phosphide (GaP), supported by a diamond substrate. The nanocavity supports a mode with quality factor Q > 1.5 x 10(6) and mode volume V < 0.52(lambda/nGaP)(3), and promises to allow Purcell enhanced collection of spontaneous emission from an NV located more than 50 nm below the diamond surface. The nanowire photonic crystal waveguide can be used to efficiently couple light into and out of the cavity, or as an efficient broadband collector of NV phonon sideband emission. The proposed structures can be fabricated using existing materials and processing techniques.