CROATIAN VERSION OF THE QUALITY OF RECOVERY QUESTIONNAIRE (QoR-40): TRANSCULTURAL ADAPTATION AND VALIDATION.

The Quality of Recovery-40 (QoR-40) questionnaire is a psychometric instrument designed to quantify postoperative recovery. It has been translated and validated in several countries but not in Croatia. The aim was to translate, cross-culturally adapt, and validate Croatian version of the QoR-40. The QoR-40 was translated from English by two independent translators, back-translated by a native speaker, and approved by an expert committee. The questionnaire was administered to 106 patients who underwent general anesthesia before elective spinal surgery, post-surgery in the operating room, and 30 days after surgery. Internal consistency was assessed using the Cronbach's alpha coefficient. Construct validity was assessed by evaluating correlation between the QoR-40 and hand grip strength. The mean preoperative global QoR-40 score was 177.6 (95% CI 174.9-180.3) and postoperative 168.9 (95% CI 165.8-171.9); the mean change was -8.8 (95% CI -11.9 to -5.6). Internal consistency was good for global QoR-40 score (Cronbach α=0.896), acceptable across all domains (8>α≥7). There was a significant correlation between grip strength and total QoR-40 score, pain, and physical independence, but not with other domains. In conclusion, the Croatian version of the QoR-40 has acceptable properties and can be used in the assessment of postoperative recovery in Croatian patients.

Biomechanical stability analysis of transpedicular screws combined with sublaminar hook-rod system using the finite element method.

AIM: To develop and test a new posterior stabilization system by augmenting the posterior hook-rod system with screws and rods. METHODS: A biomechanical analysis was performed using the finite element method. The anatomical structures were modeled based on computed tomography data. Instrumentation (hooks, rods, and screws) was modeled based on the data obtained by 3D scanning. The discretized model was verified by converging solutions and validated against data from a previously published experiment. A Th12-L1 spinal segment was modeled and modified by removing the body of the L1 vertebra (corpectomy) and the entire L1 vertebra (spondylectomy). The model was additionally modified by incorporating stabilization systems: i) posterior stabilization (transpedicular screws and rods); ii) combined posterior stabilization with sublaminar hooks; and iii) combined anterior (titanium cage) and posterior (sublaminar hooks) stabilization. The rotation angles in each group, and the strains on each part of the three stabilization constructs, were analyzed separately. RESULTS: The combined anterior and posterior stabilization system was the stiffest, except in the case of lateral bending, where combined posterior stabilization was superior. Stress analysis showed that the posterior stabilization system was significantly unloaded when augmented with a hook-rod system. A significant strain concentration was calculated in the cranially placed hooks. CONCLUSION: Stiffness analysis showed comparable stiffness between the tested and proposed stabilization construct. Stress analysis showed luxation tendency of the cranially placed hooks, which would most likely lead to system failure.

Polymethylmethacrylate cranioplasty using low-cost customised 3D printed moulds for cranial defects - a single Centre experience: technical note.

We report our experience with 3D customised cranioplasties for large cranial defects. They were made by casting bone cement in custom made moulds at the time of surgery. Between October 2015 and January 2018, 29 patients underwent the procedure; 25 underwent elective cranioplasties for large cranial defects and four were bone tumour resection and reconstruction cases. The majority of patients (96.5%) reported a satisfactory aesthetic outcome. No infections related to the surgical procedure were observed in the follow-up period. The method proved to be effective and affordable.

Validation of the Croatian version of the Oswestry Disability Index.

PURPOSE: To translate, cross-culturally adapt, and validate the Croatian version of the Oswestry Disability Index (ODI). METHODS: The original English-language ODI was cross-culturally adapted into Croatian and then evaluated in a group of 114 patients with chronic low back pain (LBP) at the Department of Neurosurgery, Zagreb University School of Medicine. Confirmatory factor analysis (CFA) was conducted with three models: two were theory driven (unidimensional and two dimensional-static and dynamic factors); the other was based on our exploratory factor analysis (EFA). Internal consistency and test-retest reliability were evaluated using Cronbach's α and the intraclass correlation coefficient (ICC), respectively. Construct validity was assessed by evaluating the correlation between the ODI and Visual Analogue Scale (VAS), and between the ODI and 36-item short form survey (SF-36) scores. RESULTS: The EFA-derived two-dimensional structure explained 82.7% of the total variance and was significantly better than the other models (P < 0.001); however, none of the models had acceptable fit. Internal consistency (Cronbach α = 0.84) and test-retest reliability (ICC = 0.94) were satisfactory. The ODI was positively correlated with VAS (rs = 0.54, P < 0.001) and negatively correlated with all of the SF-36 sections (rs = - 0.35 to - 0.64, P < 0.001, all), apart from the role-physical (rs = - 0.02, P = 0.767). CONCLUSIONS: The Croatian version of the ODI has acceptable psychometric properties. It appears to be suitable for assessment of LBP and treatment outcomes in Croatian-speaking patients. Overall, there was no evidence to reject the original unidimensional structure in favor of a two-factor solution. As such, the unidimensional structure should continue to be used in future studies. These slides can be retrieved under Electronic Supplementary Material.

Tentorial alignment and its relationship to cisternal dimensions of the pineal region: MRI anatomical study with surgical implications using the new clivotentorial method.

OBJECTIVES: Tentorial alignment and dimensions of posterior fossa cisterns are measurements whose variability can decrease surgical freedom if not taken into account when choosing the approach to the pineal region. The aim is to provide quantitative anatomical information regarding these dimensions, and to discuss their relevance in two most commonly used approaches to this region: the occipital transtentorial and supracerebellar-infratentorial approach. PATIENTS AND METHODS: A retrospective study of midsagittal T1-weighted MRI images of 410 randomly selected healthy subjects was performed. The clivus-tentorium (C-T) angle was measured to assess tentorial alignment. The following distances were used as craniocaudal cisternal measurements: quadrigeminal cistern = superior colliculi - inferior part of the splenium of corpus callosum (SC-ISCC), and superior cerebellar cistern = vermis - inferior part of the splenium of corpus callosum (VER-ISCC). RESULTS: Median C-T angle value was 19 ±â€¯7°, the quadrigeminal cistern height 6.7 ±â€¯1.6 cm, and the superior cerebellar cistern height 10.4 ±â€¯2.6 cm. The C-T angle was negatively correlated with the SC-ISCC distance (r = -0.271; p <  0.001) and the VER-ISCC distance (r = -0.052, p >  0.001). The SC-ISCC distance was positively correlated with the VER-ISCC distance (r = 0.282; p < 0.001). CONCLUSION: Our new method of measuring tentorial alignment provides a simple and effective aid in preoperative planning. For the first time, we present data on craniocaudal dimensions of posterior fossa cisterns, their relationship with tentorial alignment, and discuss their relevance in SCIT and OT approaches.

Scarcity of Implants Has Partially Replaced Cervical Spondylotic Myelopathy Decompression and Instrumented Fusion with Implant-Less Expansile Cervical Laminoplasty: Poverty Teaches all the Arts.

OBJECTIVE: The scarcity of implants during the economic crisis partially has replaced decompression and instrumented fusion for the treatment of cervical spondylotic myelopathy with implant-less expansile cervical laminoplasty (ECL). The aim of the study was to compare the results obtained with instrumented anterior cervical corpectomy and fusion with implant-less ECL. METHODS: Patients suffering from cervical spondylotic myelopathy Nurick 3-5 with preoperative tethering and postoperative untethering were included. Exclusion criterion was kyphosis more than 10°. Patients were assessed according to 30-meter walking track (30mWT), Nurick, and modified Japanese Orthopaedic Association scale scores. Kinematic magnetic resonance imaging 3-dimensional subaxial spinal cord reconstructions were 3 dimensionally modeled to confirm preoperative pincer clamping and follow-up unclamping to measure subaxial spinal cord length and pia envelope area (PEA). RESULTS: A total of 35 patients divided in the ECL (n = 19) and the anterior cervical corpectomy and fusion (n = 16) groups were selected from 534 patients operated on between September 1, 2008, and August 31, 2013 as the result of degenerative cervical disorders. Patients improved according to Nurick and modified Japanese Orthopaedic Association scores without differences between groups. Follow-up 30mWT analysis showed greater decrease in steps number and time in ECL group, creating the basis for further imaging analysis. Magnetic resonance imaging analysis showed that spinal cord length (mm) shortened more (4.47 ± 1.87 vs. 1.5 ± 2.5, t = -4.02; P = 0.0003) and PEA (mm2) shrank more (95.58 ± 43.73 vs. 22.94 ± 33.11, t = -5.45, P < 0.0001) in the ECL group. Multivariate logistic analysis showed that Δ 30mWT-time and Δ PEA were a very predictive model when area under the receiver operating characteristic curve is 0.98. CONCLUSIONS: Our results created a nidus for further research of postdecompression spinal cord relaxation.

First report of KPC-producing Klebsiella pneumoniae in Croatia.

In February 2011, a 78-year-old male patient was admitted to Clinical Hospital Center Zagreb with subdural haematoma. Klebsiella pneumoniae with reduced susceptibility to carbapenems was isolated. PCR revealed the presence of bla(KPC), bla(TEM), and bla(SHV) genes. Sequencing of bla(KPC) gene identified K. pneumoniae carbapenemase (KPC)-2 beta-lactamase. The strain belonged to ST37 clone by multilocus sequence typing. Infection control efforts limited the spread of KPC-producing clone of K. pneumoniae in our hospital so far. To our knowledge, this is the first report of a KPC-producing K. pneumoniae in Croatia.

Spread of CTX-M-15 positive Providencia spp. causing urinary tract infections at the University Hospital Split in Croatia.

AIM: During 2010-2011, six Providencia spp. (five Providencia stuartii and one Providencia rettgeri) urine isolates with unusual resistance phenotype were collected from various hospital units at the University Hospital Split in Croatia. The aim of the study was to analyze the mechanisms of resistance to expanded-spectrum cephalosporins. METHODS: The antimicrobial susceptibility to a wide range of antibiotics was determined by broth microdilution method according to CLSI guidelines. A double-disk-synergy test (DDST) was performed to detect ESBLs. The transferability of cefotaxime resistance was determined by conjugation. The presence of genes encoding ESBLs was determined by PCR while genotyping of the isolates was performed by PFGE. RESULTS: All strains were positive for ESBL production by DDST. They were uniformly resistant to amoxycillin alone and combined with clavulanate, cefazoline, cefuroxime, ceftazidime, cefotaxime, ceftriaxone, gentamicin and ciprofloxacin. P. stuartii strains transferred cefotaxime resistance to E. coli recipient strain with frequency ranging from 10-5 to 5x10-4. Five P. stuartii strains were positive for TEM and CTX-M ß-lactamases while P. rettgeri was positive only for TEM ß-lactamases. Five CTX-M producing isolates were shown to be clonally related. CONCLUSIONS: Continuous surveillance in tracking CTX-M-15- producing P. stuartii in the hospitals is necessary to prevent their spread to other hospitals and community. Global spread of ESBL positive Providencia spp all over the world is of great clinical concern.

Emergence of CTX-M group 1 extended-spectrum beta-lactamase-producing Klebsiella pneumoniae strains in the community.

AIM: Molecular characterization of ESBL-producing K. pneumoniae strains isolated from urine of outpatients in Zagreb region during the last five years. METHODS: During the five-year study period a total of 2, 651 K. pneumoniae strains were isolated from urine of nonhospitalized patients with significant bacteriuria. ESBL production was detected by double-disk diffusion technique and by > or = 3-dilution reduction in the minimal inhibitory concentration of ceftazidime in the presence of clavulanate. A total of 441 ESBL-producing K. pneumoniae strains (15.5%) were collected and 17 strains were further characterised. Double-disk synergy test was used to detect ESBLs. Minimum inhibitory concentrations (MICs) were determined by broth microdilution method according to CLSI. The transferability of cefotaxime resistance was tested by conjugation (broth mating method). PCR was used to detect alleles encoding ESBL enzymes. The genotypes of the strains were compared by pulsed-field gel electrophoresis (PFGE) of Xba I-digested genomic DNA. RESULTS: A significant difference in frequencies of ESBL isolates was observed. In the first year of study only 4.9% of isolated strains were ESBL producers, while in the second year 17.% ESBL-positive strains were detected (p < 0.01), and the frequency remained stabile within following years. All strains yielded an amplicon with primers specific for SHV beta-lactamases and CTX-M beta-lactamases. Based on sequencing of bla(CTX-M) genes enzymes of nine strains were identified as CTX-M 15 beta -lactamase and three as CTX-M-14. Isolates were not clonally related. CONCLUSION: The study demonstrated community-associated emergence of CTX-M 1 beta-lactamase-producing K. pneumoniae strains.