RNA:RNA interaction in ternary complexes resolved by chemical probing.

RNA regulation can be performed by a second targeting RNA molecule, such as in the microRNA regulation mechanism. Selective 2'-hydroxyl acylation analyzed by primer extension (SHAPE) probes the structure of RNA molecules and can resolve RNA:protein interactions, but RNA:RNA interactions have not yet been addressed with this technique. Here, we apply SHAPE to investigate RNA-mediated binding processes in RNA:RNA and RNA:RNA-RBP complexes. We use RNA:RNA binding by SHAPE (RABS) to investigate microRNA-34a (miR-34a) binding its mRNA target, the silent information regulator 1 (mSIRT1), both with and without the Argonaute protein, constituting the RNA-induced silencing complex (RISC). We show that the seed of the mRNA target must be bound to the microRNA loaded into RISC to enable further binding of the compensatory region by RISC, while the naked miR-34a is able to bind the compensatory region without seed interaction. The method presented here provides complementary structural evidence for the commonly performed luciferase-assay-based evaluation of microRNA binding-site efficiency and specificity on the mRNA target site and could therefore be used in conjunction with it. The method can be applied to any nucleic acid-mediated RNA- or RBP-binding process, such as splicing, antisense RNA binding, or regulation by RISC, providing important insight into the targeted RNA structure.

Mutate-and-chemical-shift-fingerprint (MCSF) to characterize excited states in RNA using NMR spectroscopy.

It is important to understand the dynamics and higher energy structures of RNA, called excited states, to achieve better understanding of RNA function. R1ρ relaxation dispersion NMR spectroscopy (RD) determines chemical shift differences between the most stable, ground state and the short-lived, low-populated excited states. We describe a procedure for deducing the excited state structure from these chemical shift differences using the mutate-and-chemical-shift-fingerprint (MCSF) method, which requires ~2-6 weeks and moderate understanding of NMR and RNA structure. We recently applied the MCSF methodology to elucidate the excited state of microRNA 34a targeting the SIRT1 mRNA and use this example to demonstrate the analysis. The protocol comprises the following steps: (i) determination of the secondary structure of the excited state from RD chemical shift data, (ii) design of trapped excited state RNA, (iii) validation of the excited state structure by NMR, and (iv) MCSF analysis comparing the chemical shifts of the trapped excited state with the RD-derived chemical shift differences. MCSF enables observation of the short-lived RNA structures, which can be functionally and structurally characterized by entrapment.

Production of Structured RNA Fragments by In Vitro Transcription and HPLC Purification.

The understanding of the functional importance of RNA has increased enormously in the last decades. This has required research on the RNA molecules themselves, with the concomitant need for obtaining purified RNA samples, such as for structural studies by NMR or other methods. The main method to create labeled and unlabeled RNA, T7 in vitro transcription, suffers from sequence-dependent yield and often low homogeneity for short constructs (<100 nt) and requires laborious purification. Additionally, the design of structured RNA fragments mimicking the structure of a larger biological RNA is often not straightforward. Secondary structure simulations can be used to make reliable predictions about the folding of a particular RNA fragment. In this article, we describe how to design an RNA construct of interest from a larger sequence, and we combine several previously published improvements of the in vitro transcription method, such as the use of 2'-methoxy modifications and dimethyl sulfoxide or the use of tandem repeats, to increase yield and purity of in vitro-transcribed RNA. Together with a high-performance liquid chromatography (HPLC) purification procedure using both reversed-phase ion-pairing and ion-exchange HPLC, we provide a robust protocol to obtain highly pure RNA of short to intermediate length in large quantities. The protocol optimizes yield, especially for RNA starting with nucleotides other than G. At the same time, it is simplified, and the required time is reduced. The protocols described here constitute a versatile pipeline for the production of purified RNA samples and are suitable for users with little experience in liquid chromatography. © 2021 The Authors. Basic Protocol 1: RNA construct design Basic Protocol 2: DNA template production and in vitro transcription Alternate Protocol: Tandem transcription and RNase H cleavage Basic Protocol 3: Reversed-phase ion-pairing HPLC purification Basic Protocol 4: Ion-exchange HPLC purification.

Base-pair conformational switch modulates miR-34a targeting of Sirt1 mRNA.

MicroRNAs (miRNAs) regulate the levels of translation of messenger RNAs (mRNAs). At present, the major parameter that can explain the selection of the target mRNA and the efficiency of translation repression is the base pairing between the 'seed' region of the miRNA and its counterpart mRNA1. Here we use R1ρ relaxation-dispersion nuclear magnetic resonance2 and molecular simulations3 to reveal a dynamic switch-based on the rearrangement of a single base pair in the miRNA-mRNA duplex-that elongates a weak five-base-pair seed to a complete seven-base-pair seed. This switch also causes coaxial stacking of the seed and supplementary helix fitting into human Argonaute 2 protein (Ago2), reminiscent of an active state in prokaryotic Ago4,5. Stabilizing this transient state leads to enhanced repression of the target mRNA in cells, revealing the importance of this miRNA-mRNA structure. Our observations tie together previous findings regarding the stepwise miRNA targeting process from an initial 'screening' state to an 'active' state, and unveil the role of the RNA duplex beyond the seed in Ago2.

A robust and versatile method for production and purification of large-scale RNA samples for structural biology.

Recent findings in genome-wide transcriptomics revealed that RNAs are involved in almost every biological process, across all domains of life. The characterization of native RNAs of unknown function and structure is particularly challenging due to their typical low abundance in the cell and the inherent sensitivity toward ubiquitous RNA degrading enzymes. Therefore, robust in vitro synthesis and extensive work-up methods are often needed to obtain samples amenable for biochemical, biophysical, and structural studies. Here, we present a protocol that combines the most recent advances in T7 in vitro transcription methodology with reverse phase ion pairing and ion exchange HPLC purification of RNAs for the production of yield-optimized large-scale samples. The method is easy to follow, robust and suitable for users with little or no experience within the field of biochemistry or chromatography. The complete execution of this method, for example, for production of isotopically labeled NMR samples, can be performed in less than a week.

One-Pot Production of RNA in High Yield and Purity Through Cleaving Tandem Transcripts.

There is an increasing demand for efficient and robust production of short RNA molecules in both pharmaceutics and research. A standard method is in vitro transcription by T7 RNA polymerase. This method is sequence-dependent on efficiency and is limited to products longer than ~12 nucleotides. Additionally, the native initiation sequence is required to achieve high yields, putting a strain on sequence variability. Deviations from this sequence can lead to side products, requiring laborious purification, further decreasing yield. We here present transcribing tandem repeats of the target RNA sequence followed by site-specific cleavage to obtain RNA in high purity and yield. This approach makes use of a plasmid DNA template and RNase H-directed cleavage of the transcript. The method is simpler and faster than previous protocols, as it can be performed as one pot synthesis and provides at the same time higher yields of RNA.

A two-dimensional replica-exchange molecular dynamics method for simulating RNA folding using sparse experimental restraints.

We present a 2D replica exchange protocol incorporating secondary structure information to dramatically improve 3D RNA folding using molecular dynamics simulations. We show that incorporating base-pairing restraints into all-atom, explicit solvent simulations enables the accurate recapitulation of the global tertiary fold for 4 representative RNAs ranging in length from 24 to 68 nt. This method can potentially utilize base-pairing information from a wide variety of experimental inputs to predict complex RNA tertiary folds including pseudoknots, multi-loop junctions, and non-canonical interactions.

A guide to large-scale RNA sample preparation.

RNA is becoming more important as an increasing number of functions, both regulatory and enzymatic, are being discovered on a daily basis. As the RNA boom has just begun, most techniques are still in development and changes occur frequently. To understand RNA functions, revealing the structure of RNA is of utmost importance, which requires sample preparation. We review the latest methods to produce and purify a variation of RNA molecules for different purposes with the main focus on structural biology and biophysics. We present a guide aimed at identifying the most suitable method for your RNA and your biological question and highlighting the advantages of different methods. Graphical abstract In this review we present different methods for large-scale production and purification of RNAs for structural and biophysical studies.

Fragment-Based NMR Study of the Conformational Dynamics in the bHLH Transcription Factor Ascl1.

The Achaete-scute homolog 1 (Ascl1) protein regulates a large subset of genes that leads neuronal progenitor cells to distinctive differentiation pathways during human brain development. Although it is well known that Ascl1 binds DNA as a homo- or heterodimer via its basic helix-loop-helix (bHLH) motif, little is known about the conformational sampling properties of the DNA-free full-length protein, and in particular about the bHLH domain-flanking N- and C-terminal segments, which are predicted to be highly disordered in solution. The structural heterogeneity, low solubility, and high aggregation propensity of Ascl1 in aqueous buffer solutions make high-resolution studies of this protein a challenging task. Here, we have adopted a fragment-based strategy that allowed us to obtain high-quality NMR data providing, to our knowledge, the first comprehensive high-resolution information on the structural propensities and conformational dynamics of Ascl1. The emerging picture is that of an overall extended and highly dynamic polypeptide chain comprising three helical segments and lacking persistent long-range interactions. We also show that the C-terminal helix of the bHLH domain is involved in intermolecular interactions, even in the absence of DNA. Our results contribute to a better understanding of the mechanisms of action that govern the regulation of proneural transcription factors.

Dynamics of the intrinsically disordered C-terminal domain of the nipah virus nucleoprotein and interaction with the x domain of the phosphoprotein as unveiled by NMR spectroscopy.

We provide an atomic-resolution description based on NMR spectroscopy, of the intrinsically disordered C-terminal domain of the Nipah virus nucleoprotein (NTAIL ), both in its isolated state and within the nucleocapsid (NC). Within the NC the second half of NTAIL retains conformational behavior similar to that of isolated NTAIL , whereas the first half of NTAIL becomes much more rigid. In spite of the mostly disordered nature of NTAIL , chemical shifts and relaxation measurements show a significant degree of α-helical sampling in the molecular recognition element (MoRE) involved in binding to the X domain (XD) of the phosphoprotein, with this preconfiguration being more pronounced than in the NTAIL domain from the cognate Hendra virus. Outside the MoRE, an additional region exhibiting reduced flexibility was identified within NTAIL and found to be involved in binding to the XD. (1) H- and (13) C-detected titration NMR experiments support a highly dynamic binding of NTAIL at the surface of the XD.