Correction: Bartkiene et al. Challenges Associated with Byproducts Valorization-Comparison Study of Safety Parameters of Ultrasonicated and Fermented Plant-Based Byproducts. Foods 2020, 9, 614.

In the original publication [...].

The Impact of Freeze-Dried Tenebrio molitor Larvae on the Quality, Safety Parameters, and Sensory Acceptability of Wheat Bread.

The research context involves analyzing the potential benefits derived from integrating insect protein into everyday food items. Utilizing methods consistent with established food science protocols, wheat bread was prepared with variations of 0%, 5%, 10%, and 15% Tenebrio molitor larvae powder, derived from larvae cultivated on brewery spent grain. A substrate selected for its superior nutritional content and a substrate with agar-agar gels were used. The tests included basic bread tests; sugar, acrylamide, amino, and fatty acid (FA) tests; and sensory acceptability. The results have shown that the acrylamide levels in bread with larvae remained below harmful thresholds, suggesting that using T. molitor can be a safe alternative protein source. The incorporation of powdered T. molitor larvae (p-TMLs) into bread was observed to increase certain sugar levels, such as glucose, particularly at higher larval concentrations. The addition of T. molitor significantly raised the protein and fat levels in bread. The inclusion of larvae enriched the bread with essential amino acids, enhancing the nutritional value of the bread significantly. The FA profile of the bread was altered by the inclusion of p-TMLs, increasing the levels of monounsaturated FAs. Despite the nutritional benefits, higher concentrations of larvae decreased the sensory acceptability of the bread. This suggests that there is a balance to be found between enhancing the nutritional content and maintaining consumer appeal. These findings highlight the potential for using p-TMLs as a sustainable, nutritious ingredient in bread making, although the sensory qualities at higher concentrations might limit consumer acceptance.

Impact of resistant starch: Absorption of dietary minerals, glycemic index and oxidative stress in healthy rats.

BACKGROUND & AIMS: Resistant starch (RS) is a prebiotic fiber that has been scientifically shown to control the development of obesity. Prebiotic role of RS has also seen to be very important as it helps gut bacteria to regulate fermentation and fatty acid production. This study aimed to check the different levels of RS on glycemic index, oxidative stress and mineral absorption rate in healthy rat models. To evaluate these objectives, the trial was conducted for 40 days of follow up; 10 days were the adjustment period and the collection period over 30 days. METHODS: Thirty-six healthy female Wistar rats were divided into 4 groups of (9 animals each) NC (Normal Control: without resistant starch), RS0.20 (resistant starch: 0.20 g/kg body weight), RS0.30 (resistant starch: 0.30 g/kg body weight), RS0.40 (resistant starch: 0.40 g/kg body weight). All the diets were isocaloric and isonitroginous. RESULTS: The impact of different levels of RS on the dry-matter intake (DMI) presented statistically significant results (p ≤ 0.05): DMI was reduced in RS (0.02) fed rats as compared to NC rats in first 3 weeks; and after 4th and 5th weeks, there was a DMI reduction of 28% in RS (0.04) fed rats. Moreover, there was no significant increase in the nutrient intake in all RS diets. The dry-matter (DM) digestibility was statistically significantly (P ≤ 0·05), which increased in all rats fed with different level of RS. The weight loss showed statistically significant results: RS (0.04) exhibited 19 g reduction in weight as compared with NC rats. Significant increase was observed in total oxidant status (TOS), in all the RS fed rats when compared with NC rats. The levels of Mg, Ca, Fe and Zn were shown to be decrease in feces analysis, which proves their better absorbance in gut. Statistically significant increase was observed in antioxidant capacity, whereas significant decrease was observed in the total weight of the animals, showing the role of RS in controlling obesity. CONCLUSIONS: Overall, significant results were found in all dosage level of RS but long term administration of the higher dosage level (RS0.40) may need to be studied for enhanced results. RS can help improve insulin sensitivity in overweight adults.

Consumers' Perceptions about Edible Insects' Nutritional Value and Health Effects: Study Involving 14 Countries.

Insects have been consumed for time immemorial in many regions of the globe. However, in other parts, they are not traditionally eaten. Because they are a more sustainable source of animal protein and provide valuable nutrients as well as bioactive compounds with beneficial effects on the human body, their consumption is encouraged. Knowledge can serve as a tool for better acceptance of insects as food. In this context, the present work investigated the knowledge about the nutritional value and health effects of edible insects in different countries. Data were collected by employing a questionnaire survey translated into the different languages of all participating countries and were treated using statistical tools. A total of 7222 responses were obtained. The results indicated that for many issues, the participants manifested a neutral opinion (neither agree nor disagree), but the participants who manifested agreement/disagreement were generally well informed. They were also able to identify untrue facts and answer accordingly by disagreeing. Factor analysis showed four groups of questions: nutritive value, negative perception and risks, safety and benefits of insects and contamination and harmful components. Finally, significant differences were observed according to the sociodemographic variables studies (sex, age, education, living environment and country), with age and country being the most influential of the sociodemographic factors on knowledge. Therefore, increasing knowledge is envisaged as an essential factor in augmenting the recognition of edible insects as a nutritional food, presenting health benefits apart from being a more sustainable source of animal protein when compared with beef or pork meats.

Lactic Acid Fermentation Ameliorates Intrinsic Toxicants in Brassica campestris L. Leaves Harvested at Different Growth Stages.

Brassica campestris (syn. Brassica rapa) is often known as mustard and is grown worldwide owing to its health-promoting characteristics associated with the presence of nutrients and phytochemicals. Along with the nutritional components, B. campestris also contains anti-nutrients (phytates, oxalates, tannins, alkaloids, saponins) that can cause adverse severe health effects to consumers, including rashes, nausea, headaches, bloating and nutritional deficiencies. In the present study, heating (blanching) and fermentation (Lactiplantibacillus plantarum) treatments were applied to reduce the load of the anti-nutrients of B. campestris leaves harvested at three different growth stages: the first stage (fourth week), the second stage (sixth week) and the third stage (eighth week). Results revealed that fermentation treatment using Lp. plantarum increases the ash (5.4 to 6%), protein (9 to 10.4%) and fiber (9.6 to 10.7%) contents, whereas moisture (0.91 to 0.82%), fat (9.9 to 9.1%) and carbohydrate (64.5 to 64.2%) contents decreased among B. campestris samples, and the trend was similar for all three stages. Blanching and fermentation lead to the reduction in phytates (46, 42%), saponins (34, 49%), tannins (1, 10%), oxalates (15, 7%) and alkaloids (10, 6%), separately as compared to raw samples of B. campestris leaves. In contrast, fermentation had no considerable effect on phytochemical contents (total phenolic and total flavonoids) and antioxidant potential (DPPH and FRAP). The action of blanching followed by fermentation caused more decline in the aforementioned toxicants load as compared to blanching or fermentation alone. Structural modifications in blanching and the biochemical conversions in fermentation lead to enhanced stability of nutrients and antioxidant potential. Taken together, these findings suggest blanching followed by fermentation treatments as a reliable, cost-effective and safer approach to curtail the anti-nutrient load without affecting the proximate composition, phytochemical attributes and antioxidant activity.

Physical and Chemical Characteristics of Droppings as Sensitive Markers of Chicken Health Status.

The aim of this study was to analyze the physical and chemical characteristics of chicken droppings (n = 73), which were collected during different age periods and classified by visual inspection into normal (N) and abnormal (A). Significant differences were found in the texture, pH, dry matter (DM), fatty acids (FAs), short-chain fatty acids (SCFAs), and volatile compounds (VCs) between the tested dropping groups (p ≤ 0.05). The age period of the chicken had a significant influence on the color coordinates, texture, pH, DM, and SCFA contents in N and A as well as on all FAs content in N (p ≤ 0.05). Droppings from the N group had a harder texture, lower values of a* and b* color coordinates, higher DM content, higher level of linoleic FA, and lower level of α-linolenic FA than the droppings from the A group in each age period (p ≤ 0.05). The predominant SCFA was acetic acid, the content of which was significantly lower in the N group compared to that of the A group. The alcohol and organic acid contents were the highest in most of the A group at different age periods, while ketones dominated in the N and A groups. In conclusion, the majority of the tested dropping characteristics were influenced by the age period. While certain characteristics demonstrate differences between N and A, a likely broader range of droppings is required to provide more distinct trends regarding the distribution of characteristics across different droppings.

Valorization of Dairy and Fruit/Berry Industry By-Products to Sustainable Marinades for Broilers' Wooden Breast Meat Quality Improvement.

The study aims to improve the quality of wooden breast meat (WBM) via the use of newly developed marinades based on selected strains of lactic acid bacteria (LAB) in combination with the by-products of the dairy and fruit/berry industries. Six distinct marinades were produced based on milk permeate (MP) fermented with Lacticaseibacillus casei (Lc) and Liquorilactobacillus uvarum (Lu) with the addition of apple (ApBp) and blackcurrant (BcBp) processing by-products. The microbiological and acidity parameters of the fermented marinades were evaluated. The effects of marinades on the microbiological, technical, and physicochemical properties of meat were assessed following 24 and 48 h of WBM treatment. It was established that LAB viable counts in marinades were higher than 7.00 log10 colony-forming units (CFU)/mL and, after 48 h of marination, enterobacteria and molds/yeasts in WBM were absent. Marinated (24 and 48 h) WBM showed lower dry-matter and protein content, as well as water holding capacity, and exhibited higher drip loss (by 8.76%) and cooking loss (by 12.3%) in comparison with controls. After WBM treatment, biogenic amines decreased; besides, the absence of spermidine and phenylethylamine was observed in meat marinated for 48 h with a marinade prepared with Lu. Overall, this study highlights the potential advantages of the developed sustainable marinades in enhancing the safety and quality attributes of WBM.

Changes in Chemical Composition of Lentils, Including Gamma-Aminobutyric Acid and Volatile Compound Formation during Submerged and Solid-State Fermentation with Pediococcus acidilactici.

The aim of this study was to evaluate and compare the characteristics of non-treated and fermented [via submerged (SMF) and solid-state (SSF) fermentation using Pediococcus acidilactici] lentils (Lens culinaris) grown either in pure stands (L) or relay intercropped with winter rye (LR). It was observed that the lentils were suitable substrate for lacto-fermentation. Most of the free amino acid concentrations increased in lentils after both fermentations. The highest concentration of γ-aminobutyric acid was found in SSF LR samples. However, fermentation led to higher biogenic amines (BA) content in lentils. The most abundant fatty acid in lentils was C18:2. SSF lentils showed more complex volatile compound (VC) profiles (with between nine and seventeen new VCs formed), whereas, in SMF samples, between two and five newly VCs were formed. When comparing lentil grown types, L contained significantly higher concentrations of Na, K, Ca, P, Mn, and Se, while LR contained significantly higher concentrations of Fe and Ni. To sum up, fermentation with lactic acid bacteria (LAB) contributed to the improved biological value of lentils; still, the quantity of BA needs to be considered. Further investigations into the P. acidilactici metabolism of certain compounds (such as phenolic and antinutritional compounds) in lentils during fermentation ought to be carried out.

Mycotoxins and pyrrolizidine alkaloids in herbal dietary supplements.

The market demand for herbal dietary supplements is rapidly growing and such products are becoming more common and accessible to consumers. However, the knowledge about their safety remains incomplete. Herbal dietary supplements are one of the food groups that can contribute significantly to human health concerns arising from chronic exposure to pyrrolizidine alkaloids and mycotoxins. This study aimed to simultaneously determine 79 natural contaminants, including mycotoxins, as well as pyrrolizidine and tropane alkaloids in herbal dietary supplements in one analytical run. Exposure assessment and human health risks were assessed for all compounds included in this study. The total concentration of naturally occurring contaminants in herbal dietary supplements reached 5.3 mg kg-1 and the most frequently detected mycotoxins were tentoxin and alternariol monomethyl ether. The latter was detected with the highest frequency, reaching concentrations up to 2.5 mg kg-1. The obtained results indicate a potential risk to public health related to herbal dietary supplement consumption.

An Occurrence Study of Mycotoxins in Plant-Based Beverages Using Liquid Chromatography-Mass Spectrometry.

Mycotoxins are toxic mold metabolites that can adversely affect human and animal health. More than 400 mycotoxins have been identified so far. Cereals and nuts are the predominant mycotoxin-contaminated foodstuffs. Plant-based drinks produced from cereals, nuts, and legumes have grown in popularity. The mycotoxins accumulated in these crops may transfer to these beverages. A liquid chromatography-tandem mass spectrometry method was developed and optimized for the assessment of 22 mycotoxins in commercially available plant-based drinks in Latvia and Lithuania. A total of 64% of the seventy-two analyzed beverages were positive for one to sixteen mycotoxins, with deoxynivalenol, beauvericin, and enniatins A, B, B1, T-2, and HT-2 toxins detected most frequently. The European Commission has not yet set guidelines for the maximum mycotoxin concentrations in plant-based beverages, nor has the European Food Safety Authority conducted a risk assessment. Therefore, acute exposure studies were provided for the Latvian population based on the assumed replacement of dairy milk with plant-based beverages to ascertain the safety of plant-based milk substitutes. Based on the observed levels of mycotoxin prevalence and contamination levels and assumed exposure, it can be concluded that tested plant-based beverages may be relatively safe. However, exposure to emerging mycotoxins should be considered.

Influence of Limosilactobacillus fermentum IAL 4541 and Wickerhamomyces anomalus IAL 4533 on the growth of spoilage fungi in bakery products.

Fungi are the main microorganisms responsible for the spoilage of bakery products, and their control and subsequent reduction of food waste are significant concerns in the agri-food industry. Synthetic preservatives are still the most used compounds to reduce bakery product spoilage. On the other hand, studies have shown that biopreservation can be an attractive approach to overcoming food and feed spoilage and increasing their shelf-life. However, limited studies show the preservation effects on real food matrices. Therefore, this study aimed to investigate the influence of microorganisms such as lactic acid bacteria (LAB) and yeasts on the growth of spoilage filamentous fungi (molds) on bread and panettones. In general, on conventional and multigrain bread, treatments containing Limosilactobacillus fermentum IAL 4541 and Wickerhamomyces anomalus IAL 4533 showed similar results when compared to the negative control (calcium propionate) in delaying the fungal growth of the tested species (Aspergillus chevalieri, Aspergillus montevidensis, and Penicillium roqueforti). Different from bread, treatments with W. anomallus in panettones delayed the A. chevalieri growth up to 30 days, 13 days longer than observed on negative control (without preservatives). This study showed that biopreservation is a promising method that can extend bakery products' shelf-life and be used as an alternative to synthetic preservatives.

Antimicrobial and Mycotoxin Reducing Properties of Lactic Acid Bacteria and Their Influence on Blood and Feces Parameters of Newborn Calves.

The aim of this study was to evaluate the influence of in acid whey (AW) multiplied Lactiplantibacillus plantarum LUHS135 (L.pl135), Lacticaseibacillus paracasei LUHS244 (L.pc244), and their biomass combination on newborn calves' feces and blood parameters. Additionally, the antimicrobial and mycotoxin-reducing properties and the resistance to antibiotics of the tested lactic acid bacteria (LAB) strains were analyzed. In order to ensure effective biomass growth in AW, technological parameters for the supplement preparation were selected. Control calves were fed with a standard milk replacer (SMR) and treated groups (from the 2nd day of life until the 14th day) were supplemented with 50 mL of AWL.pl135, AWL.pc244, and AWL.pl135×L.pc244 (25 mL AWL.pl135 + 25 mL AWL.pc244) in addition to SMR. It was established that L.pl135 and L.pc244 possess broad antimicrobial activities, are non-resistant to the tested antibiotics, and reduce mycotoxin concentrations in vitro. The optimal duration established for biomass growth was 48 h (LAB count higher than 7.00 log10 CFU mL-1 was found after 48 h of AW fermentation). It was established that additional feeding of newborn calves with AWL.pl135, AWL.pc244, and AWL.pl135×L.pc244 increased lactobacilli (on average by 7.4%), and AWL.pl135 and AWL.pc244 reduced the numbers of Enterobacteriaceae in calves' feces. The tested supplements also reduced the lactate concentration (on average, by 42.5%) in calves' blood. Finally, the tested supplements had a positive influence on certain health parameters of newborn calves; however, further research is needed to validate the mechanisms of the beneficial effects.

Psyllium husk gel used as an alternative and more sustainable scalding technology for wheat bread quality improvement and acrylamide reduction.

This study aimed at evaluating the influence of different amounts (5, 10, 15, 20, and 25%) of psyllium husk gel (PHG) on wheat bread (WB) characteristics - chiefly, overall acceptability (OA), porosity, specific volume (v), mass loss after baking (ML), shape retention coefficient, crust and crumb color coordinates, bread crumb hardness during storage, saccharides content, and acrylamide (AA) concentration. PHG was prepared by mixing 100 g of psyllium husk powder with 800 mL of warm water. It was established that the amount of psyllium husk gel is a significant factor in dough redness (a*) (p < 0.001). A moderate positive correlation (r) was found between acrylamide content in wheat bread and maltose concentration in dough (r = 0.567). The psyllium husk gel increased the overall acceptability and specific volume of wheat bread. Wheat bread porosity showed a moderate positive correlation with mass loss after baking (r = 0.567) and a strong positive correlation with texture hardness (r = 0.664). Lower acrylamide content was obtained in wheat bread prepared with 5, 10, 15, 20, and 25% of psyllium husk gel (1.53, 2.34, 3.80, 2.69, and 3.62 times lower than the control wheat bread, respectively). Acrylamide content showed a strong positive correlation with the porosity of wheat bread (r = 0.672), with crust brightness (L*), and yellowness/blueness (b*) coordinates, as well as with crumb brightness, redness, and yellowness coordinates. Overall, psyllium husk gel hydrocolloids reduced acrylamide formation in wheat bread and can be recommended for the quality improvement of wheat bread.

Essential Components from Plant Source Oils: A Review on Extraction, Detection, Identification, and Quantification.

Oils derived from plant sources, mainly fixed oils from seeds and essential oil from other parts of the plant, are gaining interest as they are the rich source of beneficial compounds that possess potential applications in different industries due to their preventive and therapeutic actions. The essential oils are used in food, medicine, cosmetics, and agriculture industries as they possess antimicrobial, anticarcinogenic, anti-inflammatory and immunomodulatory properties. Plant based oils contain polyphenols, phytochemicals, and bioactive compounds which show high antioxidant activity. The extractions of these oils are a crucial step in terms of the yield and quality attributes of plant oils. This review paper outlines the different modern extraction techniques used for the extraction of different seed oils, including microwave-assisted extraction (MAE), pressurized liquid extraction (PLE), cold-pressed extraction (CPE), ultrasound-assisted extraction (UAE), supercritical-fluid extraction (SFE), enzyme-assisted extraction (EAE), and pulsed electric field-assisted extraction (PEF). For the identification and quantification of essential and bioactive compounds present in seed oils, different modern techniques-such as high-performance liquid chromatography (HPLC), gas chromatography-mass spectrometry (GC-MS), Fourier transform infrared spectroscopy (FTIR), gas chromatography-infrared spectroscopy (GC-IR), atomic fluorescence spectroscopy (AFS), and electron microscopy (EM)-are highlighted in this review along with the beneficial effects of these essential components in different in vivo and in vitro studies and in different applications. The primary goal of this research article is to pique the attention of researchers towards the different sources, potential uses and applications of oils in different industries.

Fatty Acid Profile, Volatile Organic Compound, and Physical Parameter Changes in Chicken Breast Meat Affected by Wooden Breast and White Striping Myopathies.

The aim of this research was to determine the impact of pectoralis major myopathies on the physical parameters, fatty acid (FA) profile, and volatile organic compound (VOC) composition of chicken breast meat. Samples were collected from pectoralis major of broilers with varying severity scores (normal, mild, and severe) of wooden breast (WB) and white striping (WS) myopathies. Chicken breast meat affected by severe myopathies expressed higher cooking loss, drip loss (p < 0.001), and yellowness (p < 0.05) compared to those of samples that were taken from broilers without myopathies (normal). The amount of monounsaturated fatty acids (MUFAs) was significantly higher in samples affected by mild and severe myopathies than in those without myopathies (p < 0.05). There was significantly more aldehyde hexanal in muscles affected by mild and severe myopathies than in muscles without myopathies (p < 0.05). In conclusion, WB and WS myopathies of the breast muscle not only affected the physical parameters of broiler meat but also may have influenced its FA profile and VOC composition. Additionally, an elevated amount of hexanal in muscles affected by WB together with WS suggests that oxidative stress could be important in the etiopathogenesis of WB and WS myopathies. Therefore, poultry meat affected by myopathies have the potential to alter breast meat flavor and composition.

Ascertaining the Influence of Lacto-Fermentation on Changes in Bovine Colostrum Amino and Fatty Acid Profiles.

The aim of this study was to collect samples of bovine colostrum (BCOL) from different sources (agricultural companies A, B, C, D and E) in Lithuania and to ascertain the influence of lacto-fermentation with Lactiplantibacillus plantarum strain 135 and Lacticaseibacillus paracasei strain 244 on the changes in bovine colostrum amino (AA), biogenic amine (BA), and fatty acid (FA) profiles. It was established that the source of the bovine colostrum, the used LAB, and their interaction had significant effects (p < 0.05) on AA contents; lactic acid bacteria (LAB) used for fermentation was a significant factor for aspartic acid, threonine, glycine, alanine, methionine, phenylalanine, lysine, histidine, and tyrosine; and these factor's interaction is significant on most of the detected AA concentrations. Total BA content showed significant correlations with glutamic acid, serine, aspartic acid, valine, methionine, phenylalanine, histidine, and gamma amino-butyric acid content in bovine colostrum. Despite the differences in individual FA contents in bovine colostrum, significant differences were not found in total saturated (SFA), monounsaturated (MUFA), and polyunsaturated (PUFA) fatty acids. Finally, the utilization of bovine colostrum proved to be challenging because of the variability on its composition. These results suggest that processing bovine colostrum into value-added formulations for human consumption requires the adjustment of its composition since the primary production stage. Consequently, animal rearing should be considered in the employed bovine colostrum processing technologies.

Biodiversity and biotechnological properties of lactic acid bacteria isolated from traditional Moroccan sourdoughs.

The present study aimed at characterizing lactic acid bacteria (LAB) strains isolated from traditional sourdoughs collected in different regions of Morocco. Isolated strains were firstly identified using Gram staining and catalase reaction test. Presumptive LAB strains were then checked for various phenotypical properties including growth at 45 °C, resistance to NaCl, enzyme production, acidification capacity, diacetyl and exopolysaccharide (EPS) production, and antifungal activity. Finally, selected LAB strains were identified using 16S rDNA sequencing. Results showed that 32.1% of the isolates were thermophilic (45 °C) and 83.9% were resistant to NaCl (6.5%). Moreover, 51.7 and 37.5% were able to produce diacetyl and EPS, respectively. Regarding enzyme production, 55.3 and 7.1% of the isolates showed lipolytic and proteolytic activities, respectively. Low pH values (3.37-3.76) were obtained after 24 h of incubation of LAB strains in de Man, Rogosa and Sharpe (MRS) broth. Antifungal activity test against Aspergillus flavus, Aspergillus niger and Penicillium spp. showed an inhibition rate up to 50%. Bacterial DNA sequencing showed that LAB isolates belong to seven species, chiefly Levilactobacillus brevis, Lentilactobacillus parabuchneri, Lactiplantibacillus plantarum, Pediococcus pentosaceus, Enterococcus hirae, Bifidobacterium pseudocatenulatum, and Companilactobacillus paralimentarius. These findings, for the first time in Moroccan sourdoughs, indicate that the isolated LAB strains have good multifunctional properties and could be suitable as good starters for sourdough bread production under controlled conditions.

The Biochemical, Microbiological, Antioxidant and Sensory Characterization of Fermented Skimmed Milk Drinks Supplemented with Probiotics Lacticaseibacillus casei and Lacticaseibacillus rhamnosus.

A variety of foods fermented with lactic acid bacteria (LAB) serve as dietary staples in many countries. The incorporation of health-promoting probiotics into fermented milk products can have profound effects on human health. Considering the health benefits of Yakult, the current study was undertaken to develop an enriched Yakult-like fermented skimmed milk drink by the addition of two probiotic strains, namely Lacticaseibacillus casei (Lc) and Lacticaseibacillus rhamnosus (Lr). The prepared drinks were compared in terms of various parameters, including their physicochemical properties, proximate chemical composition, mineral estimation, microbial viable count, antioxidant activity, and sensory evaluation. Each strain was employed at five different concentrations, including 1% (T1), 1.5% (T2), 2% (T3), 2.5% (T4), and 3% (T5). The prepared Yakult samples were stored at 4 °C and analyzed on days 0, 7, 14, 21, and 28 to evaluate biochemical changes. The findings revealed that the concentration of the starter culture had a significant (p ≤ 0.05) impact on the pH value and moisture and protein contents, but had no marked impact on the fat or ash content of the developed product. With the Lc strain, Yakult's moisture content ranged from 84.25 ± 0.09 to 85.65 ± 0.13%, whereas with the Lr strain, it was from 84.24 ± 0.08 to 88.75 ± 0.13%. Protein levels reached their highest values with T5 (3% concentration). The acidity of all treatments increased significantly due to fermentation and, subsequently, pH showed a downward trend (p ≤ 0.05). The total soluble solids (TSS) content decreased during storage with Lc as compared to Lr, but the presence of carbohydrates had no appreciable impact. The drink with Lc exhibited a more uniform texture and smaller pore size than Yakult with Lr. Except for the iron values, which showed an increasing trend, the contents of other minerals decreased in increasing order of the added probiotic concentration used: 1% (T1), 1.5% (T2), 2% (T3), 2.5% (T4), and 3% (T5). The highest lactobacilli viable count of 8.69 ± 0.43 colony-forming units (CFU)/mL was observed with the T1 Lr-containing drink at the end of the storage period. Regarding the storage stability of the drink, the highest value for DPPH (88.75 ± 0.13%) was found with the T1 Lc drink on day 15, while the highest values for FRAP (4.86 ± 2.80 mmol Fe2+/L), TPC (5.97 ± 0.29 mg GAE/mL), and TFC (3.59 ± 0.17 mg GAE/mL) were found with the T5 Lr drink on day 28 of storage. However, the maximum value for ABTS (3.59 ± 0.17%) was noted with the T5 Lr drink on the first day of storage. The results of this study prove that Lc and Lr can be used in dairy-based fermented products and stored at refrigerated temperatures.

Effect of Lactiplantibacillus plantarum on the Conversion of Linoleic Acid of Vegetable Oil to Conjugated Linoleic Acid, Lipolysis, and Sensory Properties of Cheddar Cheese.

Conjugated linoleic acid (CLA) is perceived to protect the body from metabolic diseases. This study was conducted to determine the effect of Lactiplantibacillus plantarum (Lp. plantarum) on CLA production and sensory characteristics of cheddar cheese. Lp. plantarum can convert linoleic acid (LA) to CLA. To increase CLA in cheddar cheese and monitor the conversion of LA to CLA by Lp. plantarum, the LA content of cheese milk (3.4% fat) was increased by partially replacing fat with safflower oil (85% LA of oil) at 0, 3, 6, and 9% concentrations (T1, T2, T3, and T4). Furthermore, Lp. plantarum 108 colony-forming units (CFU)/mL (8 log CFU mL-1) was added in all treatments along with traditional cheddar cheese culture (Lactococcus lactis ssp. lactis and L. lactis ssp. cremoris). After 30 days of ripening, Lp. plantarum in T1, T2, T3, and T4 was 6.75, 6.72, 6.65, and 6.55 log CFU g-1. After 60 days of ripening, Lp. plantarum in T1, T2, T3, and T4 was 6.35, 6.27, 6.19, and 6.32 log CFU g-1. After 60 days of ripening, Lp. plantarum in T1, T2, T3, and T4 was 6.41, 6.25, 6.69, and 6.65 log CFU g-1. GC-MS analysis showed that concentrations of CLA in the 90 days' control, T1, T2, T3, and T4 were 1.18, 2.73, 4.44, 6.24, and 9.57 mg/100 g, respectively. HPLC analysis revealed that treatments containing Lp. plantarum and LA presented higher concentrations of organic acids than the control sample. The addition of safflower oil at all concentrations did not affect cheese composition, free fatty acids (FFA), and the peroxide value (POV) of cheddar cheese. Color flavor and texture scores of experimental cheeses were not different from the control cheese. It was concluded that Lp. plantarum and safflower oil can be used to increase CLA production in cheddar cheese.

On the Molecular Selection of Exopolysaccharide-Producing Lactic Acid Bacteria from Indigenous Fermented Plant-Based Foods and Further Fine Chemical Characterization.

Exopolysaccharides (EPSs) produced by lactic acid bacteria present a particular interest for the food industry since they can be incorporated in foods via in situ production by selected starter cultures or applied as natural additives to improve the quality of various food products. In the present study, 43 strains were isolated from different plant-based fermented foods and identified by molecular methods. The species found were distinctively specific according to the food source. Only six Lactiplantibacillus plantarum strains, all isolated from sauerkraut, showed the ability to produce exopolysaccharide (EPS). The utilization of glucose, fructose and sucrose was explored with regard to EPS and biomass accumulation by the tested strains. Sucrose was clearly the best carbon source for EPS production by most of the strains, yielding up to 211.53 mg/L by strain Lactiplantibacillus plantarum ZE2, while biomass accumulation reached the highest levels in the glucose-based culture medium. Most strains produced similar levels of EPS with glucose and fructose, while fructose was utilized more poorly for biomass production, yielding about 50% of biomass compared to glucose for most strains. Composition analysis of the EPSs produced by strain Lactiplantibacillus plantarum ZE2 from glucose (EPS-1) and fructose (EPS-2) revealed that glucose (80-83 mol%) and protein (41% w/w) predominated in both analyzed EPSs. However, the yield of EPS-1 was twice higher than that of EPS-2, and differences in the levels of all detected sugars were found, which shows that even for the same strain, EPS yield and composition vary depending on the carbon source. These results may be the basis for the development of tailored EPS-producing starter cultures for food fermentations, as well as technologies for the production of EPS for various applications.