Edible Long-Afterglow Photoluminescent Materials for Bioimaging.

Confining luminophores into modified hydrophilic matrices or polymers is a straightforward and widely used approach for afterglow bioimaging. However, the afterglow quantum yield and lifetime of the related material remain unsatisfactory, severely limiting the using effect especially for deep-tissue time-resolved imaging. This fact largely stems from the dilemma between material biocompatibility and the quenching effect of water environment. Herein an in situ metathesis promoted doping strategy is presented, namely, mixing ≈10-3 weight ratio of organic-emitter multicarboxylates with inorganic salt reactants, followed by metathesis reactions to prepare a series of hydrophilic but water-insoluble organic-inorganic doping afterglow materials. This strategy leads to the formation of edible long-afterglow photoluminescent materials with superior biocompatibility and excellent bioimaging effect. The phosphorescence quantum yield of the materials can reach dozens of percent (the highest case: 66.24%), together with the photoluminescent lifetime lasting for coupes of seconds. Specifically, a long-afterglow barium meal formed by coronene salt emitter and BaSO4 matrix is applied into animal experiments by gavage, and bright stomach afterglow imaging is observed by instruments or mobile phone after ceasing the photoexcitation with deep tissue penetration. This strategy allows a flexible dosage of the materials during bioimaging, facilitating the development of real-time probing and theranostic technology.

Platinum group nanoparticles doped BCN matrix: Efficient catalysts for the electrocatalytic reduction of nitrate to ammonia.

The effective treatment of nitrate (NO3-) in water as a nitrogen source and electrocatalytic NO3- reduction to ammonia (NH3) (NRA) have become preferred methods for NO3--to-NH3 conversion. Achieving efficient NO3--to-NH3 conversion requires the design and development of electrode materials with high activity and efficiency for the electrocatalytic NRA reaction. Herein, based on the special properties of dodecahydro-closo-dodecaborate anions, a BCN matrix, loaded with platinum-group nanoparticles (namely, Pd/BCN, Pt/BCN, and Ru/BCN), was prepared using a simple method for the electrocatalytic NRA reaction. Results showed that Pd/BCN exerts the best catalytic effect on the NRA reaction. The NH3 production rate reached 12.71 mg h-1 mgcat.-1 at -1.0 V vs. RHE. Faraday efficiency reached 91.79 %, which can be attributed to the more uniform distribution of the nanoparticles. Furthermore, Pd/BCN exhibited high cycling stability and resistance to ionic interference. Moreover, the density functional theory calculations indicated that small and well-distributed Pd nanoclusters in the BCN matrix have a large active surface area and promote the catalytic process. This study provides a new strategy to design catalysts for green ammonia synthesis.

Mono- and bis-Pd(ii) complexes of N-confused dithiahexaphyrin(1.1.1.1.1.0) with the absorption and aromaticity modulated by Pd(ii) coordination, macrocycle contraction and ancillary ligands.

To further enrich the coordination chemistry of hexaphyrins and probe the underlying property-structural correlations, N-confused dithiahexaphyrin(1.1.1.1.1.0) (1) with 26 π-electron Hückel aromaticity was synthesized. Based on its unprecedented two unsymmetrical cavities, five palladium complexes 2, 3, 4-Ph, 4-Cl and 5 have been successfully synthesized under various coordinations. Thus, two mono-Pd(ii) complexes 2 and 3 with the Pd(ii) atom coordinated in the two different cavities were obtained by treating 1 with palladium reagents PdCl2, and (PPh3)2PdCl2 respectively. On this basis, bis-Pd(ii) complexes 4-Ph and 4-Cl were synthesized by treating 2 and 3 with (PPh3)2PdCl2 and PdCl2, respectively. As a result, both 4-Ph and 4-Cl contain two Pd(ii) atoms coordinated within the two cavities, with one of the Pd(ii) atoms further coordinated to a triphenylphosphine ligand in addition to an anionic ancillary ligand of Ph- and Cl-, respectively. Notably, a further contracted mono-Pd(ii) complex 5 was synthesized by treating 1 with Pd(PPh3)4 by eliminating one of the meso-carbon atoms together with the corresponding C6F5 moiety. These complexes present tunable 26 π aromaticity and NIR absorption up to 1060 nm. This work provides an effective approach for developing distinctive porphyrinoid Pd(ii) complexes from a single porphyrinoid, without resorting to tedious syntheses of a series of porphyrinoid ligands.

Hydrophilic Cocrystals with Water Switched Luminescence.

Utilizing water molecules to regulate the luminescence properties of solid materials is highly challenging. Herein, we develop a strategy to produce water-triggered luminescence-switching cocrystals by coassembling hydrophilic donors with electron-deficient acceptors, where 1,2,4,5-Tetracyanobenzene (TCNB) was used as the electron acceptor and pyridyl benzimidazole derivatives were used as the electron donors enabling multiple hydrogen-bonds. Two cocrystals, namely 2PYTC and 4PYTC were obtained and showed heat-activated emission, and such emission could be quenched or weakened by adding water molecules. The cocrystal structure exhibited the donor molecule that can form multiple hydro bonds with water and acceptor molecules due to the many nitrogen atoms of them. The analyses of the photophysical data, powder X-ray diffraction, and other data confirmed the reversible fluorescence "on-off" effects were caused by eliminating and adding water molecules in the crystal lattice. The density functional theory calculations indicate that the vibration of the O-H bond of water molecules in the cocrystal can absorb the excitation energy and suppress fluorescence. Furthermore, the obtained cocrystals also showed temperature, humidity, and H+ /NH4 + responsive emission behavior, which allows their applications as thermal and humidity sensors, and multiple information encryptions. This research paves the way for preparing intelligent hydrophilic organic cocrystal luminescent materials.

Charge inversion under plasma-nanodroplet reaction conditions excludes Fischer esterification for unsaturated fatty acids: a chemical approach for type II isobaric overlap.

Direct infusion ionization methods provide the highest throughput strategy for mass spectrometry (MS) analysis of low-volume samples. But the trade-off includes matrix effects, which can significantly reduce analytical performance. Herein, we present a novel chemical approach to tackle a special type of matrix effect, namely type II isobaric overlap. We focus on detailed investigation of a nanodroplet-based esterification chemistry for differentiating isotopologue [M + 2] signal due to unsaturated fatty acid (FA) from the monoisotopic signal from a saturated FA. The method developed involves the online fusion of nonthermal plasma with charged nanodroplets, enabling selective esterification of saturated FAs. We discovered that unsaturated FAs undergo spontaneous intramolecular reaction via a novel mechanism based on a carbocation intermediate to afford a protonated lactone moiety (resonance stabilized cyclic carbonium ion), whose mass is the same as the original protonated unsaturated FA. Therefore, the monoisotopic signal from any saturated FA can be selectively shifted away from the mass-to-charge position where the isobaric interference occurs to enable effective characterization by MS. The mechanism governing the spontaneous intramolecular reactions for unsaturated FAs was validated with DFT calculations, experimentation with standards, and isotope labeling. This novel insight achieved via the ultrafast plasma-nanodroplet reaction environment provides a potentially useful synthetic pathway to achieve catalyst-free lactone preparation. Analytically, we believe the performance of direct infusion MS can be greatly enhanced by combining our approach with prior sample enrichment steps for applications in biomedicine and food safety. Also, combination with portable mass spectrometers can improve the efficiency of field studies since front-end separation is not possible under such conditions.

Engineering Tunable Ratiometric Dual Emission in Single Emitter-based Amorphous Systems.

Molecular emitters with multi-emissive properties are in high demand in numerous fields, while these properties basically depend on specific molecular conformation and packing. For amorphous systems, special molecular arrangement is unnecessary, but it remains challenging to achieve such luminescent behaviors. Herein, we present a general strategy that takes advantage of molecular rigidity and S1 -T1 energy gap balance for emitter design, which enables fluorescence-phosphorescence dual-emission properties in various solid forms, whether crystalline or amorphous. Subsequently, the amorphism of the emitters based polymethyl methacrylate films endowed an in situ regulation of the dual-emissive characteristics. With the ratiometric regulation of phosphorescence by external stimuli and stable fluorescence as internal reference, highly controllable luminescent color tuning (yellow to blue including white emission) was achieved. There properties together with a persistent luminous behavior is of benefit for an irreplaceable set of optical information combination, featuring an ultrahigh-security anti-counterfeiting ability. Our research introduces a concept of eliminating the crystal-form and molecular-conformational dependence of complex luminescent properties through emitter molecular design. This has profound implications for the development of functional materials.

Syntheses of Thiophene-Thiophene-Linked Corrorin Dimers with Tunable Near-Infrared Absorption and Distinctive Reactivity.

Thiahexaphyrinone 1 and thia-dipyrrin-appended corrorin 2 have been synthesized. Surprisingly, further oxidation of compound 2 with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) in dichloromethane afforded dimer 3 with two molecules of compound 2 linked at the α-carbon atoms of the thienyl units. Treatment of compound 3 with DDQ in MeOH and SnCl2 in tetrahydrofuran/H2O afforded the dimethoxy-attached dimer 4 and hydrogenated dihydroxy-attached dimer 5, respectively. These results provide the first examples for synthesizing thiophene-linked porphyrinoid dimers with tunable near-infrared absorption and chirality.

Applications of Boron Cluster Supramolecular Frameworks as Metal-Free Chemodynamic Therapy Agents for Melanoma.

Chemodynamic therapy (CDT) is a highly targeted approach to treat cancer since it converts hydrogen peroxide into harmful hydroxyl radicals (OH·) through Fenton or Fenton-like reactions. However, the systemic toxicity of metal-based CDT agents has limited their clinical applications. Herein, a metal-free CDT agent: 2,4,6-tri(4-pyridyl)-1,3,5-triazine (TPT)/ [closo-B12 H12 ]2- (TPT@ B12 H12 ) is reported. Compared to the traditional metal-based CDT agents, TPT@B12 H12 is free of metal avoiding cumulative toxicity during long-term therapy. Density functional theory (DFT) calculation revealed that TPT@B12 H12 decreased the activation barrier more than 3.5 times being a more effective catalyst than the Fe2+ ion (the Fenton reaction), which decreases the barrier about twice. Mechanismly, the theory calculation indicated that both [B12 H12 ]-· and [TPT-H]2+ have the capacity to decompose hydrogen into 1 O2 , OH·, and O2 -· . With electron paramagnetic resonance and fluorescent probes, it is confirmed that TPT@B12 H12 increases the levels of 1 O2 , OH·, and O2 -· . More importantly, TPT@B12 H12 effectively suppress the melanoma growth both in vitro and in vivo through 1 O2 , OH·, and O2 -· generation. This study specifically highlights the great clinical translational potential of TPT@B12 H12 as a CDT reagent.

Synthesis of iron-boride/carbon-nitride composites and their applications in chemodynamic therapy.

Chemodynamic therapy (CDT) is an emerging treatment strategy that inhibits tumor growth by catalyzing the generation of reactive oxygen species (ROS), such as hydroxyl radicals (•OH), using specific nanomaterials. Herein, we have developed a new class of iron-based nanomaterials, i.e., iron-based borides (FeB), using the superchaotropic effect of a boron cluster (closo-[B12H12]2-) and organic ligands, followed by high-temperature calcination. Experimental data and theoretical calculations revealed that FeB nanoparticles exhibit a Fenton-like effect, efficiently decomposing hydrogen peroxide into •OH and thus increasing the concentration of ROS. FeB nanomaterials demonstrate excellent catalytic performance, efficiently generate ROS, and exert significant antitumor effects in cell experiments and animal models. Therefore, FeB nanomaterials have considerable potential for application in tumor treatment and offer new insights for the development of novel and efficient cancer therapy strategies.

Thermally activated delayed fluorescence in a deep red dinuclear iridium(iii) complex: a hidden mechanism for short luminescence lifetimes.

The high luminescence efficiency of cyclometallated iridium(iii) complexes, including those widely used in OLEDs, is typically attributed solely to the formally spin-forbidden phosphorescence process being facilitated by spin-orbit coupling with the Ir(iii) centre. In this work, we provide unequivocal evidence that an additional mechanism can also participate, namely a thermally activated delayed fluorescence (TADF) pathway. TADF is well-established in other materials, including in purely organic compounds, but has never been observed in iridium complexes. Our findings may transform the design of iridium(iii) complexes by including an additional, faster fluorescent radiative decay pathway. We discover it here in a new dinuclear complex, 1, of the form [Ir(N^C)2]2(µ-L), where N^C represents a conventional N^C-cyclometallating ligand, and L is a bis-N^O-chelating bridging ligand derived from 4,6-bis(2-hydroxyphenyl)-pyrimidine. Complex 1 forms selectively as the rac diastereoisomer upon reaction of [Ir(N^C)2(µ-Cl)]2 with H2L under mild conditions, with none of the alternative meso isomer being separated. Its structure is confirmed by X-ray diffraction. Complex 1 displays deep-red luminescence in solution or in polystyrene film at room temperature (λem = 643 nm). Variable-temperature emission spectroscopy uncovers the TADF pathway, involving the thermally activated re-population of S1 from T1. At room temperature, TADF reduces the photoluminescence lifetime in film by a factor of around 2, to 1 µs. The TADF pathway is associated with a small S1-T1 energy gap ΔEST of approximately 50 meV. Calculations that take into account the splitting of the T1 sublevels through spin-orbit coupling perfectly reproduce the experimentally observed temperature-dependence of the lifetime over the range 20-300K. A solution-processed OLED comprising 1 doped into the emitting layer at 5 wt% displays red electroluminescence, λEL = 625 nm, with an EQE of 5.5% and maximum luminance of 6300 cd m-2.

Photoinduced Carbonyl Radical Luminescence in Host-Guest Systems.

Developing a free radical emission system in different states, especially in water, is highly challenging and desired. Herein, a host-guest coassembly strategy was used to protect the in situ photoactivated radical emission of carbonyl compounds in solid and aqueous solutions by doping them into a series of small molecules with hydroxyl groups. The intermolecular interactions between host and guest and the electron-donating ability of the hydroxyl group can significantly promote the formation and stabilization of luminescence by carbonyl radicals. Accordingly, the stimuli-responsive property of the free radical system was investigated in detail, and the self-assembled aggregates showed photoactive and thermoresponsive behaviors. In addition, an advanced ammonia compound identification system can be built based on a radical emission system. Our design strategy sheds light on developing free radical systems that can emit in various states, which will greatly broaden the application range of free radicals.

Highly Efficient Room-Temperature Light-Induced Synthesis of Polymer Dots: A Programming Control Paradigm of Polymer Nanostructurization from Single-Component Precursor.

Polymer dots (PDs) have raised considerable research interest due to their advantages of designable nanostructures, high biocompatibility, versatile photoluminescent properties, and recyclability as nanophase. However, there remains a lack of in situ, real-time, and noncontact methods for synthesizing PDs. Here we report a rational strategy to synthesize PDs through a well-designed single-component precursor (an asymmetrical donor-acceptor-donor' molecular structure) by photoirradiation at ambient temperature. In contrast to thermal processes that normally lack atomic economy, our method is mild and successive, based on an aggregation-promoted sulfonimidization triggered by photoinduced delocalized intrinsic radical cations for polymerization, followed by photooxidation for termination with structural shaping to form PDs. This synthetic approach excludes any external additives, rendering a conversion rate of the precursor exceeding 99%. The prepared PDs, as a single entity, can realize the integration of nanocore luminescence and precursor-transferred luminescence, showing 41.5% of the total absolute luminescence quantum efficiency, which is higher than most reported PD cases. Based on these photoluminescent properties, together with the superior biocompatibility, a unique membrane microenvironmental biodetection could be exemplified. This strategy with programming control of the single precursor can serve as a significant step toward polymer nanomanufacturing with remote control, high-efficiency, precision, and real-time operability.

Charge carrier dynamics in conducting polymer PEDOT using ab initio molecular dynamics simulations.

As conducting polymers become increasingly important in electronic devices, understanding their charge transport is essential for material and device development. Various semi-empirical approaches have been used to describe temporal charge carrier dynamics in these materials, but there have yet to be any theoretical approaches utilizing ab initio molecular dynamics. In this work, we develop a computational technique based on ab initio Car-Parrinello molecular dynamics to trace charge carrier temporal motion in archetypical conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT). Particularly, we analyze charge dynamics in a single PEDOT chain and in two coupled chains with different degrees of coupling and study the effect of temperature. In our model we first initiate a positively charged polaron (compensated by a negative counterion) at one end of the chain, and subsequently displace the counterion to the other end of the chain and trace polaron dynamics in the system by monitoring bond length alternation in the PEDOT backbone and charge density distribution. We find that at low temperature (T = 1 K) the polaron distortion gradually disappears from its initial location and reappears near the new position of the counterion. At the room temperature (T = 300 K), we find that the distortions induced by polaron, and atomic vibrations are of the same magnitude, which makes tracking the polaron distortion challenging because it is hidden behind the temperature-induced vibrations. The novel approach developed in this work can be used to study polaron mobility along and between the chains, investigate charge transport in highly doped polymers, and explore other flexible polymers, including n-doped ones.

Mononuclear copper(I) complexes bearing a 3-phenyl-5-(pyridin-4-yl)-1,2,4-triazole ligand: synthesis, crystal structure, TADF-luminescence, and mechanochromic effects.

Three new mononuclear heteroleptic copper(I) halide complexes, [CuL(PPh3)2X] (X = Cl, Br, I), based on 3-phenyl-5-(pyridin-4-yl)-1,2,4-triazole (L) and triphenylphosphine (PPh3) ligands, have been prepared by reaction of CuX (X = Cl, Br, I), L and PPh3 in a molar ratio of 1 : 1 : 2 in MeCN solutions. The synthesized complexes exhibit blue light emission in solutions and bright green emission in the crystal state with quantum yields of up to 100%. The luminescence decay analysis and density functional theory calculations revealed that the emission of solid samples at room temperature corresponds to the thermally activated delayed fluorescence, while that at 77 K is assigned to phosphorescence. Utilizing the studied complexes in OLED heterostructures resulted in high-performing green-emitting devices with an external quantum efficiency of up to 13.4%.

Photo-physical characterization of high triplet yield brominated fluoresceins by transient state (TRAST) spectroscopy.

Photo-induced dark transient states of fluorophores can pose a problem in fluorescence spectroscopy. However, their typically long lifetimes also make them highly environment sensitive, suggesting fluorophores with prominent dark-state formation yields to be used as microenvironmental sensors in bio-molecular spectroscopy and imaging. In this work, we analyzed the singlet-triplet transitions of fluorescein and three synthesized carboxy-fluorescein derivatives, with one, two or four bromines linked to the anthracence backbone. Using transient state (TRAST) spectroscopy, we found a prominent internal heavy atom (IHA) enhancement of the intersystem crossing (ISC) rates upon bromination, inferred by density functional theory calculations to take place via a higher triplet state, followed by relaxation to the lowest triplet state. A corresponding external heavy atom (EHA) enhancement was found upon adding potassium iodide (KI). Notably, increased KI concentrations still resulted in lowered triplet state buildup in the brominated fluorophores, due to relatively lower enhancements in ISC, than in the triplet decay. Together with an antioxidative effect on the fluorophores, adding KI thus generated a fluorescence enhancement of the brominated fluorophores. By TRAST measurements, analyzing the average fluorescence intensity of fluorescent molecules subject to a systematically varied excitation modulation, dark state transitions within very high triplet yield (>90%) fluorophores can be directly analyzed under biologically relevant conditions. These measurements, not possible by other techniques such as fluorescence correlation spectroscopy, opens for bio-sensing applications based on high triplet yield fluorophores, and for characterization of high triplet yield photodynamic therapy agents, and how they are influenced by IHA and EHA effects.

Derivatives of 2-Pyridone Exhibiting Hot-Exciton TADF for Sky-Blue and White OLEDs.

Development of emissive materials for utilization in organic light-emitting diodes (OLEDs) remains a highly relevant research field. One of the most important aspects in the development of efficient emitters for OLEDs is the efficiency of triplet-to-singlet exciton conversion. There are many concepts proposed for the transformation of triplet excitons to singlet excitons, among which thermally activated delayed fluorescence (TADF) is the most efficient and widespread. One of the variations of the TADF concept is the hot exciton approach according to which the process of exciton relaxation into the lowest energy electronic state (internal conversion as usual) is slower than intersystem crossing between high-lying singlets and triplets. In this paper, we present the donor-acceptor materials based on 2-pyridone acceptor coupled to the different donor moieties through the phenyl linker demonstrating good performance as components of sky-blue, green-yellow, and white OLEDs. Despite relatively low photoluminescence quantum yields, the compound containing 9,9-dimethyl-9,10-dihydroacridine donor demonstrated very good efficiency in sky-blue OLED with the single emissive layer, which showed an external quantum efficiency (EQE) of 3.7%. It also forms a green-yellow-emitting exciplex with 4,4',4″-tris[phenyl(m-tolyl)amino]triphenylamine. The corresponding OLED showed an EQE of 6.9%. The white OLED combining both exciplex and single emitter layers demonstrated an EQE of 9.8% together with excellent current and power efficiencies of 16.1 cd A-1 and 6.9 lm W-1, respectively. Quantum-chemical calculations together with the analysis of photoluminescence decay curves confirm the ability of all of the studied compounds to exhibit TADF through the hot exciton pathway, but the limiting factor reducing the efficiency of OLEDs is the low photoluminescence quantum yields caused mainly by nonradiative intersystem crossing dominating over the radiative fluorescence pathway.

Bright Free-Radical Emission in Ionic Liquids.

It is challenging to achieve stable and efficient radical emissions under ambient conditions. Herein, we present a rational design strategy to protect photoinduced carbonyl free radical emission through electrostatic interaction and spin delocalization effects. The host-guest system is constructed from tricarbonyl-substituted benzene molecules and a series of imidazolium ionic liquids as the guest and host, respectively, whereby the carbonyl anion radical emission can be in situ generated under the light irradiation and further stabilized by electrostatic interaction. More importantly, the anion species and the alkyl chain length of imidazolium ionic liquids show a noticeable effect on luminescence efficiency, with the highest radical emission efficiency is as high as 53.3 % after optimizing the imidazole ionic liquid's structure, which is about four times higher than the polymer-protected radical system. Theoretical calculations confirm the synergistic effect of strong electrostatic interactions and that the spin delocalization effect significantly stabilizes the radical emission. Moreover, such a radical emission system also could be integrated with a fluorescent dye to induce multi-color or even white light emission with reversible temperature-responsive characteristics. The radical emission system can also be used to detect different amine compounds on the basis of the emission changes and photoactivation time.

Photoisomerization of Heptamethine Cyanine Dyes Results in Red-Emissive Species: Implications for Near-IR, Single-Molecule, and Super-Resolution Fluorescence Spectroscopy and Imaging.

Photoisomerization kinetics of the near-infrared (NIR) fluorophore Sulfo-Cyanine7 (SCy7) was studied by a combination of fluorescence correlation spectroscopy (FCS) and transient state (TRAST) excitation modulation spectroscopy. A photoisomerized state with redshifted emission was identified, with kinetics consistent with a three-state photoisomerization model. Combining TRAST excitation modulation with spectrofluorimetry (spectral-TRAST) further confirmed an excitation-induced redshift in the emission spectrum of SCy7. We show how this red-emissive photoisomerized state contributes to the blinking kinetics in different emission bands of NIR cyanine dyes, and how it can influence single-molecule, super-resolution, as well as Förster resonance energy transfer (FRET) and multicolor readouts. Since this state can also be populated at moderate excitation intensities, it can also more broadly influence fluorescence readouts, also readouts not relying on high excitation conditions. However, this additional red-emissive state and its photodynamics, as identified and characterized in this work, can also be used as a strategy to push the emission of NIR cyanine dyes further into the NIR and to enhance photosensitization of nanoparticles with absorption spectra further into the NIR. Finally, we show that the photoisomerization kinetics of SCy7 and the formation of its redshifted photoisomer depend strongly on local environmental conditions, such as viscosity, polarity, and steric constraints, which suggests the use of SCy7 and other NIR cyanine dyes as environmental sensors. Such environmental information can be monitored by TRAST, in the NIR, with low autofluorescence and scattering conditions and on a broad range of samples and experimental conditions.

The Accumulation of Electrical Energy Due to the Quantum-Dimensional Effects and Quantum Amplification of Sensor Sensitivity in a Nanoporous SiO2 Matrix Filled with Synthetic Fulvic Acid.

A heterostructured nanocomposite MCM-41 was formed using the encapsulation method, where a silicon dioxide matrix-MCM-41 was the host matrix and synthetic fulvic acid was the organic guest. Using the method of nitrogen sorption/desorption, a high degree of monoporosity in the studied matrix was established, with a maximum for the distribution of its pores with radii of 1.42 nm. According to the results of an X-ray structural analysis, both the matrix and the encapsulate were characterized by an amorphous structure, and the absence of a manifestation of the guest component could be caused by its nanodispersity. The electrical, conductive, and polarization properties of the encapsulate were studied with impedance spectroscopy. The nature of the changes in the frequency behavior of the impedance, dielectric permittivity, and tangent of the dielectric loss angle under normal conditions, in a constant magnetic field, and under illumination, was established. The obtained results indicated the manifestation of photo- and magneto-resistive and capacitive effects. In the studied encapsulate, the combination of a high value of ε and a value of the tgδ of less than 1 in the low-frequency range was achieved, which is a prerequisite for the realization of a quantum electric energy storage device. A confirmation of the possibility of accumulating an electric charge was obtained by measuring the I-V characteristic, which took on a hysteresis behavior.

Pyrrolylmethylene Appended Corrorin: Peripheral Coordination and Transformation to Pyridyl Incorporated Hemiporphycene Analogue.

A pyrrolylmethylene appended corrorin 1 was synthesized and coordinated with [Rh(CO)2Cl]2 to afford 1-Rh with unique RhI-η2-CC bonding in addition to the coordination of the dipyrrin-like unit and a carbonyl ligand. Further oxidation of 1 afforded 2, exhibiting a hydrocorrorinone core, and it can be further transformed into pyrrolo[3,2-c]pyridine incorporated hemiporphycene analogue 3 upon treatment with HOAc. The side chain modifies the reactivity of corrorin and effectively tunes the NIR absorption of the resulting porphyrinoids.