RESUMEN
OBJECTIVE: Exercise monitoring with low-cost wearables could improve the efficacy of remote physical-therapy prescriptions by tracking compliance and informing the delivery of tailored feedback. While a multitude of commercial wearables can detect activities of daily life, such as walking and running, they cannot accurately detect physical-therapy exercises. The goal of this study was to build open-source classifiers for remote physical-therapy monitoring and provide insight on how data collection choices may impact classifier performance. METHODS: We trained and evaluated multi-class classifiers using data from 19 healthy adults who performed 37 exercises while wearing 10 inertial measurement units (IMUs) on the chest, pelvis, wrists, thighs, shanks, and feet. We investigated the effect of sensor density, location, type, sampling frequency, output granularity, feature engineering, and training-data size on exercise-classification performance. RESULTS: Exercise groups (n = 10) could be classified with 96% accuracy using a set of 10 IMUs and with 89% accuracy using a single pelvis-worn IMU. Multiple sensor modalities (i.e., accelerometers and gyroscopes), high sampling frequencies, and more data from the same population did not improve model performance, but in the future data from diverse populations and better feature engineering could. CONCLUSIONS: Given the growing demand for exercise monitoring systems, our sensitivity analyses, along with open-source tools and data, should reduce barriers for product developers, who are balancing accuracy with product formfactor, and increase transparency and trust in clinicians and patients.
Asunto(s)
Acelerometría , Ejercicio Físico , Dispositivos Electrónicos Vestibles , Humanos , Adulto , Masculino , Femenino , Ejercicio Físico/fisiología , Acelerometría/métodos , Adulto Joven , Monitoreo Ambulatorio/métodos , Monitoreo Ambulatorio/instrumentación , Procesamiento de Señales Asistido por ComputadorRESUMEN
PURPOSE: This study aimed to evaluate patellar tendon loading profiles (loading index, based on loading peak, loading impulse, and loading rate) of rehabilitation exercises to develop clinical guidelines to incrementally increase the rate and magnitude of patellar tendon loading during rehabilitation. METHODS: Twenty healthy adults (10 females/10 males, 25.9 ± 5.7 yr) performed 35 rehabilitation exercises, including different variations of squats, lunge, jumps, hops, landings, running, and sports specific tasks. Kinematic and kinetic data were collected, and a patellar tendon loading index was determined for each exercise using a weighted sum of loading peak, loading rate, and cumulative loading impulse. Then the exercises were ranked, according to the loading index, into tier 1 (loading index ≤0.33), tier 2 (0.33 < loading index <0.66), and tier 3 (loading index ≥0.66). RESULTS: The single-leg decline squat showed the highest loading index (0.747). Other tier 3 exercises included single-leg forward hop (0.666), single-leg countermovement jump (0.711), and running cut (0.725). The Spanish squat was categorized as a tier 2 exercise (0.563), as was running (0.612), double-leg countermovement jump (0.610), single-leg drop vertical jump (0.599), single-leg full squat (0.580), double-leg drop vertical jump (0.563), lunge (0.471), double-leg full squat (0.428), single-leg 60° squat (0.411), and Bulgarian squat (0.406). Tier 1 exercises included 20 cm step up (0.187), 20 cm step down (0.288), 30 cm step up (0.321), and double-leg 60° squat (0.224). CONCLUSIONS: Three patellar tendon loading tiers were established based on a combination of loading peak, loading impulse, and loading rate. Clinicians may use these loading tiers as a guide to progressively increase patellar tendon loading during the rehabilitation of patients with patellar tendon disorders and after anterior cruciate ligament reconstruction using the bone-patellar tendon-bone graft.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior , Ligamento Rotuliano , Traumatismos de los Tendones , Masculino , Adulto , Femenino , Humanos , Terapia por Ejercicio , Ejercicio Físico , PosturaRESUMEN
The early postnatal period represents a critical window for the maturation and development of orthopedic tissues, including those within the knee joint. To understand how mechanical loading impacts the maturational trajectory of the meniscus and other tissues of the hindlimb, perturbation of postnatal weight bearing was achieved through surgical resection of the sciatic nerve in neonatal mice at 1 or 14 days old. Sciatic nerve resection (SNR) produced significant and persistent disruptions in gait, leading to reduced tibial length and reductions in Achilles tendon mechanical properties. However, SNR resulted in minimal disruptions in morphometric parameters of the menisci and other structures in the knee joint, with no detectable differences in Col1a1-YFP or Col2a1-CFP expressing cells within the menisci. Furthermore, micromechanical properties of the meniscus and cartilage (as assessed by atomic force microscopy-based nanoindentation testing) were not different between experimental groups. In contrast to our initial hypothesis, reduced hindlimb weight bearing via neonatal SNR did not significantly impact the growth and development of the knee meniscus. This unexpected finding demonstrates that the input mechanical threshold required to sustain meniscus development may be lower than previously hypothesized, though future studies incorporating skeletal kinematic models coupled with force plate measurements will be required to calculate the loads passing through the affected hindlimb and precisely define these thresholds. Collectively, these results provide insight into the mechanobiological responses of the meniscus to alterations in load, and contribute to our understanding of the factors that influence normal postnatal development.
Asunto(s)
Menisco , Ratones , Animales , Articulación de la Rodilla/fisiología , Cartílago , Marcha/fisiología , Soporte de Peso , Meniscos Tibiales/cirugíaRESUMEN
The purpose of this study is to develop a wearable paradigm to accurately monitor Achilles tendon loading and walking speed using wearable sensors that reduce subject burden. Ten healthy adults walked in an immobilizing boot under various heel wedge conditions (30°, 5°, 0°) and walking speeds. Three-dimensional motion capture, ground reaction force, and 6-axis inertial measurement unit (IMU) signals were collected. We used a Least Absolute Shrinkage and Selection Operator (LASSO) regression to predict peak Achilles tendon load and walking speed. The effects of altering sensor parameters were also explored. Walking speed models (mean absolute percentage error (MAPE): 8.81 ± 4.29%) outperformed tendon load models (MAPE: 34.93 ± 26.3%). Models trained with subject-specific data performed better than models trained without subject-specific data. Removing the gyroscope, decreasing the sampling frequency, and using combinations of sensors did not change the usability of the models, having inconsequential effects on model performance. We developed a simple monitoring paradigm that uses LASSO regression and wearable sensors to accurately predict (MAPE ≤ 12.6%) Achilles tendon loading and walking speed while ambulating in an immobilizing boot. This paradigm provides a clinically implementable strategy to longitudinally monitor patient loading and activity while recovering from Achilles tendon injuries.
Asunto(s)
Tendón Calcáneo , Dispositivos Electrónicos Vestibles , Adulto , Humanos , Velocidad al Caminar , Caminata , Aprendizaje Automático , Fenómenos Biomecánicos , MarchaRESUMEN
Motion analysis is essential for assessing in-vivo human biomechanics. Marker-based motion capture is the standard to analyze human motion, but the inherent inaccuracy and practical challenges limit its utility in large-scale and real-world applications. Markerless motion capture has shown promise to overcome these practical barriers. However, its fidelity in quantifying joint kinematics and kinetics has not been verified across multiple common human movements. In this study, we concurrently captured marker-based and markerless motion data on 10 healthy study participants performing 8 daily living and exercise movements. We calculated the correlation (Rxy) and root-mean-square difference (RMSD) between markerless and marker-based estimates of ankle dorsi-plantarflexion, knee flexion, and three-dimensional hip kinematics (angles) and kinetics (moments) during each movement. Estimates from markerless motion capture matched closely with marker-based in ankle and knee joint angles (Rxy ≥ 0.877, RMSD ≤ 5.9°) and moments (Rxy ≥ 0.934, RMSD ≤ 2.66 % height × weight). High outcome comparability means the practical benefits of markerless motion capture can simplify experiments and facilitate large-scale analyses. Hip angles and moments demonstrated more differences between the two systems (RMSD: 6.7-15.9° and up to 7.15 % height × weight), especially during rapid movements such as running. Markerless motion capture appears to improve the accuracy of hip-related measures, yet more research is needed for validation. We encourage the biomechanics community to continue verifying, validating, and establishing best practices for markerless motion capture, which holds exciting potential to advance collaborative biomechanical research and expand real-world assessments needed for clinical translation.
Asunto(s)
Extremidad Inferior , Captura de Movimiento , Humanos , Fenómenos Biomecánicos , Cinética , Movimiento , Movimiento (Física) , Articulación de la RodillaRESUMEN
Achilles tendon injuries are treated with progressive weight bearing to promote tendon healing and restore function. Patient rehabilitation progression are typically studied in controlled, lab settings and do not represent the long-term loading experienced during daily living. The purpose of this study is to develop a wearable paradigm to accurately monitor Achilles tendon loading and walking speed using low-cost sensors that reduce subject burden. Ten healthy adults walked in an immobilizing boot under various heel wedge conditions (30°, 5°, 0°) and walking speeds. Three-dimensional motion capture, ground reaction force, and 6-axis inertial measurement unit (IMU) signals were collected per trial. We used Least Absolute Shrinkage and Selection Operator (LASSO) regression to predict peak Achilles tendon load and walking speed. The effects of using only accelerometer data, different sampling frequency, and multiple sensors to train the model were also explored. Walking speed models outperformed (mean absolute percentage error (MAPE): 8.41 ± 4.08%) tendon load models (MAPE: 33.93 ± 23.9%). Models trained with subject-specific data performed significantly better than generalized models. For example, our personalized model that was trained with only subject-specific data predicted tendon load with a 11.5 ± 4.41% MAPE and walking speed with a 4.50 ± 0.91% MAPE. Removing gyroscope channels, decreasing sampling frequency, and using combinations of sensors had inconsequential effects on models performance (changes in MAPE < 6.09%). We developed a simple monitoring paradigm that uses LASSO regression and wearable sensors to accurately predict Achilles tendon loading and walking speed while ambulating in an immobilizing boot. This paradigm provides a clinically implementable strategy to longitudinally monitor patient loading and activity while recovering from Achilles tendon injuries.
RESUMEN
BACKGROUND: Exercises that provide progressive therapeutic loading are a central component of patellofemoral pain rehabilitation, but quantitative evidence on patellofemoral joint loading is scarce for a majority of common weightbearing rehabilitation exercises. PURPOSE: To define a loading index to quantify, compare, rank, and categorize overall loading levels in the patellofemoral joint across 35 types of weightbearing rehabilitation exercises and activities of daily living. STUDY DESIGN: Descriptive laboratory study. METHODS: Model-estimated knee flexion angles and extension moments based on motion capture and ground-reaction force data were used to quantify patellofemoral joint loading in 20 healthy participants who performed each exercise. A loading index was computed via a weighted sum of loading peak and cumulative loading impulse for each exercise. The 35 rehabilitation exercises and daily living activities were then ranked and categorized into low, moderate, and high "loading tiers" according to the loading index. RESULTS: Overall patellofemoral loading levels varied substantially across the exercises and activities, with loading peak ranging from 0.6 times body weight during walking to 8.2 times body weight during single-leg decline squat. Most rehabilitation exercises generated a moderate level of patellofemoral joint loading. Few weightbearing exercises provided low-level loading that resembled walking or high-level loading with both high magnitude and duration. Exercises with high knee flexion tended to generate higher patellofemoral joint loading compared with high-intensity exercises. CONCLUSION: This study quantified patellofemoral joint loading across a large collection of weightbearing exercises in the same cohort. CLINICAL RELEVANCE: The visualized loading index ranks and modifiable worksheet may assist clinicians in planning patient-specific exercise programs for patellofemoral pain rehabilitation.
Asunto(s)
Articulación Patelofemoral , Síndrome de Dolor Patelofemoral , Humanos , Actividades Cotidianas , Fenómenos Biomecánicos , Terapia por Ejercicio , Soporte de Peso , Peso Corporal , Articulación de la RodillaRESUMEN
Motion analysis is essential for assessing in-vivo human biomechanics. Marker-based motion capture is the standard to analyze human motion, but the inherent inaccuracy and practical challenges limit its utility in large-scale and real-world applications. Markerless motion capture has shown promise to overcome these practical barriers. However, its fidelity in quantifying joint kinematics and kinetics has not been verified across multiple common human movements. In this study, we concurrently captured marker-based and markerless motion data on 10 healthy subjects performing 8 daily living and exercise movements. We calculated the correlation (R xy ) and root-mean-square difference (RMSD) between markerless and marker-based estimates of ankle dorsi-plantarflexion, knee flexion, and three-dimensional hip kinematics (angles) and kinetics (moments) during each movement. Estimates from markerless motion capture matched closely with marker-based in ankle and knee joint angles (R xy ≥ 0.877, RMSD ≤ 5.9°) and moments (R xy ≥ 0.934, RMSD ≤ 2.66 % height × weight). High outcome comparability means the practical benefits of markerless motion capture can simplify experiments and facilitate large-scale analyses. Hip angles and moments demonstrated more differences between the two systems (RMSD: 6.7° - 15.9° and up to 7.15 % height × weight), especially during rapid movements such as running. Markerless motion capture appears to improve the accuracy of hip-related measures, yet more research is needed for validation. We encourage the biomechanics community to continue verifying, validating, and establishing best practices for markerless motion capture, which holds exciting potential to advance collaborative biomechanical research and expand real-world assessments needed for clinical translation.
RESUMEN
High-density surface electromyography (HDsEMG) allows noninvasive muscle monitoring and disease diagnosis. Clinical translation of current HDsEMG technologies is hampered by cost, limited scalability, low usability, and minimal spatial coverage. Here, this study presents, validates, and demonstrates the broad clinical applicability of dry wearable MXene HDsEMG arrays (MXtrodes) fabricated from safe and scalable liquid-phase processing of Ti3 C2 Tx . The fabrication scheme allows easy customization of array geometry to match subject anatomy, while the gel-free and minimal skin preparation enhance usability and comfort. The low impedance and high conductivity of the MXtrode arrays allow detection of the activity of large muscle groups at higher quality and spatial resolution than state-of-the-art wireless electromyography sensors, and in realistic clinical scenarios. To demonstrate the clinical applicability of MXtrodes in the context of neuromuscular diagnostics and rehabilitation, simultaneous HDsEMG and biomechanical mapping of muscle groups across the whole calf during various tasks, ranging from controlled contractions to walking is shown. Finally, the integration of HDsEMG acquired with MXtrodes with a machine learning pipeline and the accurate prediction of the phases of human gait are shown. The results underscore the advantages and translatability of MXene-based wearable bioelectronics for studying neuromuscular function and disease, as well as for precision rehabilitation.
Asunto(s)
Dispositivos de Autoayuda , Dispositivos Electrónicos Vestibles , Humanos , Electromiografía/métodos , Músculo Esquelético/fisiologíaRESUMEN
Plantar flexor functional deficits measured using joint dynamometry are associated with poor outcomes in patients following Achilles tendon rupture. In this study, we developed a small animal dynamometer to quantify functional deficits in a rat Achilles tendon rupture model. Like our reported plantar flexor deficits in patients recovering from Achilles tendon ruptures, we found in our small animal model functional deficits across the ankle range of motion, resulting in an average 34% less positive work being done compared to the uninjured contralateral limb. These functional deficits are similar to 38% less plantar flexor work done by patients who were treated non-surgically in our prior research. Further, these torque deficits were greater in plantar flexion than dorsiflexion, which agree with clinical complaints of limited function during tasks like jumping and hiking. These findings serve as compelling evidence that our Sprague Dawley rat model of an Achilles tendon rupture recapitulates the functional deficits we observed in patients treated nonsurgically. We provide thorough documentation for other groups to build their own dynamometers, which can be modified to meet unique experimental criteria.
Asunto(s)
Tendón Calcáneo , Animales , Ratas , Ratas Sprague-Dawley , Tendón Calcáneo/lesiones , LágrimasRESUMEN
Researchers often estimate joint loading using musculoskeletal models to solve the inverse dynamics problem. This approach is powerful because it can be done non-invasively, however, it relies on assumptions and physical measurements that are prone to measurement error. The purpose of this study was to determine the impact of these errors - specifically, segment mass and shear ground reaction force - have on analyzing joint loads during activities of daily living. We performed traditional marker-based motion capture analysis on 8 healthy adults while they completed a battery of exercises on 6 degree of freedom force plates. We then scaled the mass of each segment as well as the shear component of the ground reaction force in 5% increments between 0 and 200% and iteratively performed inverse dynamics calculations, resulting in 1681 mass-shear combinations per activity. We compared the peak joint moments of the ankle, knee, and hip at each mass-shear combination to the 100% mass and 100% shear combination to determine the percent error. We found that the ankle was most resistant to changes in both mass and shear and the knee was resistant to changes in mass while the hip was sensitive to changes in both mass and shear. These results can help guide researchers who are pursuing lower-cost or more convenient data collection setups.
Asunto(s)
Actividades Cotidianas , Extremidad Inferior , Adulto , Articulación del Tobillo , Fenómenos Biomecánicos , Articulación de la Cadera , Humanos , Articulación de la RodillaRESUMEN
BACKGROUND: Deficits in sporting performance after Achilles tendon repair may be due to changes in musculotendinous unit structure, including tendon elongation and muscle fascicle shortening. PURPOSE/HYPOTHESIS: The purpose was to discern whether Achilles tendon rupture reduces triceps surae muscle force generation, alters functional ankle range of motion, or both during sports-related tasks. We hypothesized that individuals who have undergone Achilles tendon repair lack the functional ankle range of motion needed to complete sports-related tasks. STUDY DESIGN: Descriptive laboratory study. METHODS: The study included individuals 1 to 3 years after treatment of Achilles tendon rupture with open repair. Participants (n = 11) completed a heel-rise task and 3 jumping tasks. Lower extremity biomechanics were analyzed using motion capture. Between-limb differences were tested using paired t test. RESULTS: Pelvic vertical displacement was reduced during the heel-rise (mean difference, -12.8%; P = .026) but not during the jumping task (P > .1). In the concentric phase of all tasks, peak ankle plantarflexion angle (range of mean difference, -19.2% to -48.8%; P < .05) and total plantar flexor work (defined as the area under the plantar flexor torque - ankle angle curve) (range of mean difference, -9.5% to -25.7%; P < .05) were lower on the repaired side relative to the uninjured side. No significant differences were seen in peak Achilles tendon load or impulse with any of the tasks. There were no differences in plantar flexor work or Achilles tendon load parameters during eccentric phases. CONCLUSION: Impaired task performance or increased demands on proximal joints were observed on the repaired side in tasks isolating ankle function. Tasks that did not isolate ankle function appeared to be well recovered, although functional ankle range of motion was reduced with rupture. Reduced plantar flexor muscle-tendon unit work supports previous reports that an elongated tendon and shorter muscle fascicles caused by Achilles tendon rupture constrain functional capacity. Achilles tendon peak load and impulse were not decreased, suggesting that reduced and shifted functional ankle range of motion (favoring dorsiflexion) underlies performance deficits. CLINICAL RELEVANCE: These findings point to the need to reduce tendon elongation and restore muscle length of the triceps surae after Achilles tendon rupture in order to address musculature that is short but not necessarily weak for improved performance with sports-related activities.
Asunto(s)
Tendón Calcáneo , Tendón Calcáneo/cirugía , Tobillo , Articulación del Tobillo/cirugía , Talón , Humanos , Músculo Esquelético , Rango del Movimiento Articular , Rotura/cirugíaRESUMEN
Markerless motion capture using deep learning approaches have potential to revolutionize the field of biomechanics by allowing researchers to collect data outside of the laboratory environment, yet there remain questions regarding the accuracy and ease of use of these approaches. The purpose of this study was to apply a markerless motion capture approach to extract lower limb angles in the sagittal plane during the vertical jump and to evaluate agreement between the custom trained model and gold standard motion capture. We performed this study using a large open source data set (N = 84) that included synchronized commercial video and gold standard motion capture. We split these data into a training set for model development (n = 69) and test set to evaluate capture performance relative to gold standard motion capture using coefficient of multiple correlations (CMC) (n = 15). We found very strong agreement between the custom trained markerless approach and marker-based motion capture within the test set across the entire movement (CMC > 0.991, RMSE < 3.22°), with at least strong CMC values across all trials for the hip (0.853 ± 0.23), knee (0.963 ± 0.471), and ankle (0.970 ± 0.055). The strong agreement between markerless and marker-based motion capture provides evidence that markerless motion capture is a viable tool to extend data collection to outside of the laboratory. As biomechanical research struggles with representative sampling practices, markerless motion capture has potential to transform biomechanical research away from traditional laboratory settings into venues convenient to populations that are under sampled without sacrificing measurement fidelity.
Asunto(s)
Articulación del Tobillo , Laboratorios , Fenómenos Biomecánicos , Articulación de la Rodilla , Movimiento (Física)RESUMEN
Given its complex shape and relatively small size, the trapezium surface at the trapeziometacarpal (TMC) joint is a particularly attractive target for anatomic biologic joint resurfacing, especially given its propensity to develop osteoarthritis, and the limited and sub-optimal treatment options available. For this to advance to clinical translation, however, an appropriate large animal model is required. In this study, we explored the porcine accessory carpal bone (ACB) as a model for the human trapezium. We characterized ACB anatomy, geometry, joint and tissue-scale mechanics, and composition across multiple donors. We showed that the ACB is similar both in size, and in the saddle shape of the main articulating surface to the human trapezium, and that loads experienced across each joint are similar. Using this information, we then devised a fabrication method and workflow to produce patient-specific tissue-engineered replicas based on CT scans, and showed that when such replicas are implanted orthotopically in an ex vivo model, normal loading is restored. Data from this study establish the porcine ACB as a model system in which to evaluate function of engineered living joint resurfacing strategies. STATEMENT OF SIGNIFICANCE: Biologic joint resurfacing, or the replacement of a joint with living tissue as opposed to metal and plastic, is the holy grail of orthopaedic tissue engineering. However, despite marked advances in engineering native-like osteochondral tissues and in matching patient-specific anatomy, these technologies have not yet reached clinical translation. Given its propensity for developing osteoarthritis, as well as its small size and complex shape, the trapezial surface of the trapeziometacarpal joint at the base of the thumb presents a unique opportunity for pursuing a biologic joint resurfacing strategy. This work establishes the porcine accessory carpal bone as an animal model for the human trapezium and presents a viable test-bed for evaluating the function of engineered living joint resurfacing strategies.
Asunto(s)
Artroplastia de Reemplazo , Productos Biológicos , Huesos del Carpo , Osteoartritis , Hueso Trapecio , Animales , Humanos , Osteoartritis/cirugía , Porcinos , Hueso Trapecio/cirugíaRESUMEN
Purpose: The purpose of this study was to compare the active range of motion in patients with thumb carpometacarpal (CMC) arthritis to healthy controls. A secondary objective of this study was to examine the feasibility of using wearable motion sensors in a clinical setting. Methods: Asymptomatic controls and patients with radiographic and clinical evidence of thumb CMC joint arthritis were recruited. The experimental setup allowed participants to rest their forearm in neutral pronosupination with immobilization of the second through fifth CMC joints. An electromagnetic motion sensor was embedded into a thumb interphalangeal joint immobilizer, and participants were asked to complete continuous thumb circumduction movements. Data were continuously recorded, and circumduction curves were created based on degrees of motion. Peak thumb abduction and extension angles were also extracted from the data. Results: A total of 29 extremities with thumb CMC arthritis and 18 asymptomatic extremities were analyzed. Bilateral disease was present in 64% of patients. Patient age range was 35-83 years, and the control group age range was 26-83 years. The most affected extremities had Eaton stage 3 disease (38%, N = 11). The average maximum thumb abduction was 53.9° ± 19.6° in affected extremities and 70.8° ± 10.1° for controls. Average maximum thumb extension was 50.0° ± 15.2° in affected extremities and 58.4° ± 9.1° for controls. When comparing patients with Eaton stage 3 and 4 disease to controls, average maximum abduction and extension decreased with increasing disease stage (42.3°, 46.1°, and 70.8° for abduction, respectively, and 58.4°, 43.3°, and 41.3° for extension, respectively). Conclusions: We observed more severe motion limitations with increasing Eaton stage, and statistically significant differences were seen with stage 3 and 4 disease. A wearable motion sensor using a portable experimental setup was used to obtain measurements in a clinical setting. Type of study/level of evidence: Diagnostic II.
RESUMEN
PURPOSE: The purposes of our study were to evaluate Achilles tendon loading profiles of various exercises and to develop guidelines to incrementally increase the rate and magnitude of Achilles tendon loading during rehabilitation. METHODS: Eight healthy young adults completed a battery of rehabilitation exercises. During each exercise, we collected three-dimensional motion capture and ground reaction force data to estimate Achilles tendon loading biomechanics. Using these loading estimates, we developed an exercise progression that incrementally increases Achilles tendon loading based on the magnitude, duration, and rate of tendon loading. RESULTS: We found that Achilles tendon loading could be incrementally increased using a set of either isolated ankle movements or multijoint movements. Peak Achilles tendon loads varied more than 12-fold, from 0.5 bodyweights during a seated heel raise to 7.3 bodyweights during a forward single-leg hop. Asymmetric stepping movements like lunges, step ups, and step downs provide additional flexibility for prescribing tendon loading on a side-specific manner. CONCLUSION: By establishing progressions for Achilles tendon loading, rehabilitative care can be tailored to address the specific needs of each patient. Our comprehensive data set also provides clinicians and researchers guidelines on how to alter magnitude, duration, and rate of loading to design new exercises and exercise progressions based on the clinical need.
Asunto(s)
Tendón Calcáneo/fisiología , Terapia por Ejercicio/métodos , Ejercicio Físico/fisiología , Soporte de Peso , Tendón Calcáneo/lesiones , Adulto , Articulación del Tobillo/fisiología , Fenómenos Biomecánicos , Femenino , Humanos , Extremidad Inferior/fisiología , Masculino , Estudios de Tiempo y MovimientoRESUMEN
Isokinetic dynamometers are the gold standard tools used to assess in vivo joint and muscle function in human subjects, however, the large size and high cost of these devices prevents their widespread use outside of traditonal biomechanics labs. In this study, we developed a mobile dynamometer to allow for field measurements of joint level function. To ensure subject safety, we designed a new "isodamping" dynamometer that acted as passive energy sink which constrains velocity by forcing incompressible oil through an orifice with an adjustable diameter. We validated the performance of this device by testing plantar flexor function in six healthy adults on both a commercial isokinetic dynamometer and this novel device at three velocities/damper settings and at three different effort levels. During maximal effort contraction, measurements of peak moment and velocity at peak moment of the novel device and the commercial device were strongly correlated along the predicted quadratic line (R2 > 0.708, p ≤ 0.008). The setting of the damper prescribed the relationship between peak moment and velocity at peak moment across all subjects and effort levels (R2 > 0.910, p < 0.001). The novel device was significantly smaller (0.75 m2 footprint), lighter (30 kg), and lower cost (~$2,200 US Dollars) than commercial devices compared to commercially-available isokinetic dynamometers (5.95 m2 footprint, 450 kg, and ~$40,000 US Dollars respectively).
Asunto(s)
Articulación del Tobillo , Contracción Isométrica , Adulto , Fenómenos Biomecánicos , Terapia por Ejercicio , Humanos , Movimiento , Músculo EsqueléticoRESUMEN
Achilles tendon ruptures are common injuries that lead to functional deficits in two-thirds of patients. Progressively loading the healing tendon has been associated with superior outcomes, but the loading profiles that patients experience throughout rehabilitation have not yet been established. In this study, we developed and calibrated an instrumented immobilizing boot paradigm that is aimed at longitudinally quantifying patient loading biomechanics to develop personalized rehabilitation protocols. We used a 3-part instrumented insole to quantify the ankle loads generated by the Achilles tendon and secured a load cell inline with the posterior strut of the immobilizing boot to quantify boot loading. We then collected gait data from five healthy young adults to demonstrate the validity of this instrumented immobilizing boot paradigm to assess Achilles tendon loading during ambulation. We developed a simple calibration procedure to improve the measurement fidelity of the instrumented insole needed to quantify Achilles tendon loading while ambulating with an immobilizing boot. By assessing Achilles tendon loading with the ankle constrained to 0 degrees and 30 degrees plantar flexion, we confirmed that walking with the foot supported in plantar flexion decreased Achilles tendon loading by 60% (P < 0.001). This instrumented immobilizing boot paradigm leverages commercially available sensors and logs data using a small microcontroller secured to the boot and a handheld device, making our paradigm capable of continuously monitoring biomechanical loading outside of the lab or clinic.
Asunto(s)
Tendón Calcáneo , Traumatismos de los Tendones , Pie , Marcha , Humanos , Rotura , Caminata , Adulto JovenRESUMEN
BACKGROUND: Plantar flexion is critical for ambulatory function but there are few wearable solutions to monitor loading. RESEARCH QUESTION: The purpose of this study was to develop and validate a method to calculate plantar flexion moment using a commercially-available instrumented insole. METHODS: Seven healthy young adults completed a battery of functional activities to characterize a range of plantar flexion loading which included single leg heel raise, step down, and drop jump as well as walking and running at comfortable speeds. Lower extremity trajectories were captured using motion capture and ground reaction forces were recorded with embedded force plates as well as the instrumented insole. We compared plantar flexion moment calculated by the instrumented insole to 'gold standard' inverse dynamics. RESULTS: We found that estimating plantar flexion moment using our instrumented insole algorithm compared favorably to moments calculated using inverse dynamics across all activities. Errors in the maximum plantar flexion moments were less than 10 % for all activities, averaging 4.9 %. Root mean square errors across the entire activity were also small, averaging 1.0 % bodyweight * height. Additionally, the calculated wave forms were strongly correlated with inverse dynamics (Rxy > 0.964). SIGNIFICANCE: Our findings demonstrate the utility and fidelity of a simple method for estimating plantar flexion moment using a commercially available instrumented insole. By leveraging this simple methodology, it is now feasible to prospectively track and eventually prescribe plantar flexion loading outside of the clinic to improve patient outcomes.
Asunto(s)
Algoritmos , Placa Plantar/fisiopatología , Rango del Movimiento Articular , Zapatos , Caminata , Adulto , Fenómenos Biomecánicos , Femenino , Humanos , Masculino , Reproducibilidad de los ResultadosRESUMEN
Achilles tendon disorders are among the most difficult sports-related injuries to predict with current diagnostic tools. The purpose of this study was to identify a clinically useful marker for early tendon damage. We hypothesized that alterations in mean echogenicity are linked with changes in vitro tendon mechanics. To test our hypothesis, we harvested Achilles tendons from 10 fresh-frozen cadaveric feet and cyclically fatigued them using a universal test frame while we continuously acquired ultrasound images. Throughout this fatigue protocol, we applied 2 stress tests every 500 loading cycles to quantify changes in ultrasound imaging echogenicity. We continued this fatigue protocol until each tendon either failed completely or survived 150,000 cycles. Tendons that failed during the fatigue loading (6/10) underwent greater changes in mean echogenicity compared to tendons that did not fail (P = 0.031). These tendons that failed during fatigue loading demonstrated greater changes in mean echogenicity that surpassed 1.0%; whereas survivor tendons exhibited less than 0.5% changes in mean echogenicity. We found that changes in mean echogenicity measured with ultrasound increased proportionally with increased tendon damage. The magnitude of these changes was relatively small (<1.5% change in mean echogenicity) but may be an effective predictor of tendon failure. Mean echogenicity is a promising marker for quantifying fatigue damage in cadaveric Achilles tendons during a stress test. Although these changes cannot be detected with the naked eye, computer-based predictive models may effectively assess risk of tendon damage in physically active adults.