Systematic identification of trimethoprim metabolites in lettuce.

Antibiotics are some of the most widely used drugs. Their release in the environment is of great concern since their consumption is a major factor for antibiotic resistance, one of the most important threats to human health. Their occurrence and fate in agricultural systems have been extensively investigated in recent years. Yet whilst their biotic and abiotic degradation pathways have been thoroughly researched, their biotransformation pathways in plants are less understood, such as in case of trimethoprim. Although trimethoprim has been reported in the environment, its fate in higher plants still remains unknown. A bench-scale experiment was performed and 30 trimethoprim metabolites were identified in lettuce (Lactuca sativa L.), of which 5 belong to phase I and 25 to phase II. Data mining yielded a list of 1018 ions as possible metabolite candidates, which was filtered to a final list of 87 candidates. Molecular structures were assigned for 19 compounds, including 14 TMP metabolites reported for the first time. Alongside well-known biotransformation pathways in plants, additional novel pathways were suggested, namely, conjugation with sesquiterpene lactones, and abscisic acid as a part of phase II of plant metabolism. The results obtained offer insight into the variety of phase II conjugates and may serve as a guideline for studying the metabolization of other chemicals that share a similar molecular structure or functional groups with trimethoprim. Finally, the toxicity and potential contribution of the identified metabolites to the selective pressure on antibiotic resistance genes and bacterial communities via residual antimicrobial activity were evaluated.

Implications of the use of organic fertilizers for antibiotic resistance gene distribution in agricultural soils and fresh food products. A plot-scale study.

The spread of antibiotic resistance genes (ARG) into agricultural soils, products, and foods severely limits the use of organic fertilizers in agriculture. In order to help designing agricultural practices that minimize the spread of ARG, we fertilized, sown, and harvested lettuces and radish plants in experimental land plots for two consecutive agricultural cycles using four types of fertilizers: mineral fertilization, sewage sludge, pig slurry, or composted organic fraction of municipal solid waste. The analysis of the relative abundances of more than 200,000 ASV (Amplicon Sequence Variants) identified a small, but significant overlap (<10%) between soil's and fertilizer microbiomes. Clinically relevant ARG were found in higher loads (up to 100 fold) in fertilized soils than in the initial soil, particularly in those treated with organic fertilizers, and their loads grossly correlated to the amount of antibiotic residues found in the corresponding fertilizer. Similarly, low, but measurable ARG loads were found in lettuce (tetM, sul1) and radish (sul1), corresponding the lowest values to samples collected from minerally fertilized fields. Comparison of soil samples collected along the total period of the experiment indicated a relatively year-round stability of soil microbiomes in amended soils, whereas ARG loads appeared as unstable and transient. The results indicate that ARG loads in soils and foodstuffs were likely linked to the contribution of bacteria from organic fertilizer to the soil microbiomes, suggesting that an adequate waste management and good pharmacological and veterinarian practices may significantly reduce the presence of these ARGs in agricultural soils and plant products.

Occurrence and human health risk assessment of antibiotics and their metabolites in vegetables grown in field-scale agricultural systems.

The occurrence of antibiotics (ABs) in four types of commercially grown vegetables (lettuce leaves, tomato fruits, cauliflower inflorescences, and broad bean seeds) was analyzed to assess the human exposure and health risks associated with different agronomical practices. Out of 16 targeted AB residues, seven ABs belonging to three groups (i.e., benzyl pyrimidines, fluoroquinolones, and sulfonamides) were above the method detection limit in vegetable samples ranging from 0.09 ng g-1 to 3.61 ng g-1 fresh weight. Data analysis (quantile regression models, principal component and hierarchical cluster analysis) showed manure application, irrigation with river water (indirect wastewater reuse), and vegetable type to be the most significant factors for AB occurrence in the targeted crops. Metabolites were detected in 70 of the 80 vegetable samples analyzed, and their occurrence was both plant- and compound-specific. In 73 % of the total samples, the concentration of AB metabolites was higher than the concentration of their parent compound. Finally, the potential human health risk estimated using the hazard quotient approach, based on the acceptable daily intake and the estimated daily intake, showed a negligible risk for human health from vegetable consumption. However, canonical-correspondence analysis showed that detected ABs explained 54 % of the total variation in AB resistance genes abundance in the vegetable samples. Thus, further studies are needed to assess the risks of antibiotic resistance promotion in vegetables and the significance of the occurrence of their metabolites.

Effects of prescription antibiotics on soil- and root-associated microbiomes and resistomes in an agricultural context.

The use of treated wastewater for crop irrigation is rapidly increasing to respond to the ever-growing demands for water and food resources. However, this practice may contribute to the spread of antibiotic resistant bacteria (ARB) and antibiotic resistant genes (ARGs) in agricultural settings. To evaluate this potential risk, we analyzed microbiomes and resistomes of soil and Lactuca sativa L. (lettuce) root samples from pots irrigated with tap water spiked with 0, 20, or 100 µg L-1 of a mixture of three antibiotics (Trimethoprim, Ofloxacin, Sulfamethoxazole). The presence of antibiotics induced changes in bacterial populations, particularly in soil, as revealed by 16S rDNA sequence analysis. Parallel shotgun sequencing identified a total of 56 different ARGs conferring resistance against 14 antibiotic families. Antibiotic -treated samples showed increased loads of ARGs implicated in mutidrug resistance or in both direct and indirect acquired resistance. These changes correlated with the prevalence of Xantomonadales species in the root microbiomes. We interpret these data as indicating different strategies of soil and root microbiomes to cope with the presence of antibiotics, and as a warning that their presence may increase the loads of ARBs and ARGs in edible plant parts, therefore constituting a potential risk for human consumers.

Elucidating biotransformation pathways of ofloxacin in lettuce (Lactuca sativa L).

Antibiotics can be uptaken by plants from soil desorption or directly from irrigation water, but their metabolization pathways in plants are largely unknown. In this paper, an analytical workflow based on high-resolution mass spectrometry was applied for the systematic identification of biotransformation products of ofloxacin in lettuce. The targeted metabolites were selected by comparing the mass chromatograms of exposed with control samples using an advanced spectra-processing method (Fragment Ion Search). The innovative methodology presented allowed us to identify a total of 11 metabolites, including 5 ofloxacin metabolites that are being reported for the first time in plants. Accordingly, major transformation pathways were proposed revealing insight into how ofloxacin and related chemicals are metabolized in lettuce. Furthermore, the influence of biotransformation on potential residual antimicrobial activity of identified compounds was discussed. Human exposure to antibiotics at doses below the minimum inhibitory concentrations is crucial in human risk assessment, including food ingestion; however, in the case of ofloxacin presented results reveal that plant metabolites should also be considered so as not to underestimate their risk.

Effects of industrial pollution on the reproductive biology of Squalius laietanus (Actinopterygii, Cyprinidae) in a Mediterranean stream (NE Iberian Peninsula).

Mediterranean rivers are severely affected by pollutants from industry, agriculture and urban activities. In this study, we examined how industrial pollutants, many of them known to act as endocrine disruptors (EDCs), could disturb the reproduction of the Catalan chub (Squalius laietanus). The survey was conducted throughout the reproductive period of S. laietanus (from March to July 2014) downstream an industrial WWTP located in the River Ripoll (NE Iberian Peninsula). Eighty fish (28 females and 52 males) were caught by electrofishing upstream and 77 fish (33 females and 44 males) downstream a WWTP. For both sexes, the gonadosomatic index (GSI) and gonadal histology were examined and related to water chemical analysis and fish biomarkers. Female fecundity was assessed using the gravimetric method. Fish from the polluted site showed enhanced biomarker responses involved in detoxification. Also, in the polluted site, lower GSI values were attained in both sexes and females displayed lower numbers of vitellogenic oocytes. Gonadal histology showed that all maturation stages of testicles and ovaries were present at the two study sites but fish males from the polluted site had smaller diameter seminiferous tubules. Water chemical analysis confirmed greater presence of EDCs in the river downstream the industrial WWTP. The chemicals benzotriazole and benzothiazole could be partially responsible for the observed alterations in the reproductive biology of S. laietanus.

Ranking of crop plants according to their potential to uptake and accumulate contaminants of emerging concern.

The reuse of treated wastewater (TWW) for irrigation and the use of biosolids and manures as soil amendment constitute significant pathways for the introduction of the contaminants of emerging concern (CECs) to the agricultural environment. Consequently, CECs are routinely detected in TWW-irrigated agricultural soils and runoff from such sites, in biosolids- and manure-amended soils, and in surface and groundwater systems and sediments receiving TWW. Crop plants grown in such contaminated agricultural environments have been found to uptake and accumulate CECs in their tissues, constituting possible vectors of introducing CECs into the food chain; an issue that is presently considered of high priority, thus needing intensive investigation. This review paper aims at highlighting the responsible mechanisms for the uptake of CECs by plants and the ability of each crop plant species to uptake and accumulate CECs in its edible tissues, thus providing tools for mitigating the introduction of these contaminants into the food chain. Both biotic (e.g. plants' genotype and physiological state, soil fauna) and abiotic factors (e.g. soil pore water chemistry, physico-chemical properties of CECs, environmental perturbations) have been proven to influence the ability of crop plants to uptake and accumulate CECs. According to authors' estimates, based on the thorough elaboration of knowledge produced by existing relevant studies, the ability of crop plants to uptake and accumulate CECs decrease in the order of leafy vegetables > root vegetables > cereals and fodder crops > fruit vegetables; though, the uptake of CECs by important crop plants, such as fruit trees, is not yet evaluated. Overall, further studies must be performed to estimate the potential of crop plants to uptake and accumulate CECs in their edible tissues, and to characterize the risk for human health represented by their presence in human and livestock food products.

The potential implications of reclaimed wastewater reuse for irrigation on the agricultural environment: The knowns and unknowns of the fate of antibiotics and antibiotic resistant bacteria and resistance genes - A review.

The use of reclaimed wastewater (RWW) for the irrigation of crops may result in the continuous exposure of the agricultural environment to antibiotics, antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs). In recent years, certain evidence indicate that antibiotics and resistance genes may become disseminated in agricultural soils as a result of the amendment with manure and biosolids and irrigation with RWW. Antibiotic residues and other contaminants may undergo sorption/desorption and transformation processes (both biotic and abiotic), and have the potential to affect the soil microbiota. Antibiotics found in the soil pore water (bioavailable fraction) as a result of RWW irrigation may be taken up by crop plants, bioaccumulate within plant tissues and subsequently enter the food webs; potentially resulting in detrimental public health implications. It can be also hypothesized that ARGs can spread among soil and plant-associated bacteria, a fact that may have serious human health implications. The majority of studies dealing with these environmental and social challenges related with the use of RWW for irrigation were conducted under laboratory or using, somehow, controlled conditions. This critical review discusses the state of the art on the fate of antibiotics, ARB and ARGs in agricultural environment where RWW is applied for irrigation. The implications associated with the uptake of antibiotics by plants (uptake mechanisms) and the potential risks to public health are highlighted. Additionally, knowledge gaps as well as challenges and opportunities are addressed, with the aim of boosting future research towards an enhanced understanding of the fate and implications of these contaminants of emerging concern in the agricultural environment. These are key issues in a world where the increasing water scarcity and the continuous appeal of circular economy demand answers for a long-term safe use of RWW for irrigation.

Two important limitations relating to the spiking of environmental samples with contaminants of emerging concern: How close to the real analyte concentrations are the reported recovered values?

Occurrence and effects of contaminants of emerging concern pose a special challenge to environmental scientists. The investigation of these effects requires reliable, valid, and comparable analytical data. To this effect, two critical aspects are raised herein, concerning the limitations of the produced analytical data. The first relates to the inherent difficulty that exists in the analysis of environmental samples, which is related to the lack of knowledge (information), in many cases, of the form(s) of the contaminant in which is present in the sample. Thus, the produced analytical data can only refer to the amount of the free contaminant ignoring the amount in which it may be present in other forms; e.g., as in chelated and conjugated form. The other important aspect refers to the way with which the spiking procedure is generally performed to determine the recovery of the analytical method. Spiking environmental samples, in particular solid samples, with standard solution followed by immediate extraction, as is the common practice, can lead to an overestimation of the recovery. This is so, because no time is given to the system to establish possible equilibria between the solid matter-inorganic and/or organic-and the contaminant. Therefore, the spiking procedure need to be reconsidered by including a study of the extractable amount of the contaminant versus the time elapsed between spiking and the extraction of the sample. This study can become an element of the validation package of the method.

Emerging organic contaminants in vertical subsurface flow constructed wetlands: influence of media size, loading frequency and use of active aeration.

Four side-by-side pilot-scale vertical flow (VF) constructed wetlands of different designs were evaluated for the removal of eight widely used emerging organic contaminants from municipal wastewater (i.e. ibuprofen, acetaminophen, diclofenac, tonalide, oxybenzone, triclosan, ethinylestradiol, bisphenol A). Three of the systems were free-draining, with one containing a gravel substrate (VGp), while the other two contained sand substrate (VS1p and VS2p). The fourth system had a saturated gravel substrate and active aeration supplied across the bottom of the bed (VAp). All beds were pulse-loaded on an hourly basis, except VS2p, which was pulse-loaded every 2h. Each system had a surface area of 6.2m(2), received a hydraulic loading rate of 95 mm/day and was planted with Phragmites australis. The beds received an organic loading rate of 7-16 gTOC/m(2)d. The sand-based VF (VS1p) performed significantly better (p<0.05) than the gravel-based wetland (VGp) both in the removal of conventional water quality parameters (TSS, TOC, NH4-N) and studied emerging organic contaminants except for diclofenac (85 ± 17% vs. 74 ± 15% average emerging organic contaminant removal for VS1p and VGp, respectively). Although loading frequency (hourly vs. bi-hourly) was not observed to affect the removal efficiency of the cited conventional water quality parameters, significantly lower removal efficiencies were found for tonalide and bisphenol A for the VF wetland that received bi-hourly dosing (VS2p) (higher volume per pulse), probably due to the more reducing conditions observed in that system. However, diclofenac was the only contaminant showing an opposite trend to the rest of the compounds, achieving higher elimination rates in the wetlands that exhibited less-oxidizing conditions (VS2p and VGp). The use of active aeration in the saturated gravel bed (VAp) generally improved the treatment performance compared to the free-draining gravel bed (VGp) and achieved a similar performance to the free-draining sand-based VF wetlands (VS1p).

Attenuation of emerging organic contaminants in a hybrid constructed wetland system under different hydraulic loading rates and their associated toxicological effects in wastewater.

The capacity of a hybrid constructed wetland (CW) system consisting of two vertical flow (VF) CWs working alternatively (3m(2)), one horizontal flow (HF) CW (2m(2)) and one surface flow (FWS) CW (2m(2)) in series to eliminate 13 emerging organic contaminants (EOCs) under three different hydraulic loading rates (HLRs) (0.06, 0.13 and 0.18 m d(-1) considering the area of the two VF beds) was studied through a continuous injection experiment. General toxicity, dioxin-like activity, antimicrobial activity and estrogenicity were also measured under the highest hydraulic loading rate. The hybrid system was highly efficient on the removal of total injected EOCs (except for antibiotics, 43 ± 32%) at all three HLRs (87 ± 10%). The removal efficiency in the hybrid CW system showed to decrease as the HLR increased for most compounds. The VF wetlands removed most of the injected EOCs more efficiently than the other two CWs, which was attributable to the predominant aerobic degradation pathways of the VF beds (70 ± 21%). General toxicity was reduced up to 90% by the VF beds. Estrogenicity and dioxin-like activity were similarly reduced by the VF and the HF wetlands, whereas antimicrobial activity was mainly removed by the FWS wetland. Bearing this in mind, this injection study has demonstrated that the use of hybrid CW systems is a suitable wastewater technology for removing EOCs and toxicity even at high HLRs.

Emerging organic contaminant removal depending on primary treatment and operational strategy in horizontal subsurface flow constructed wetlands: influence of redox.

This study aimed at assessing the influence of primary treatment (hydrolytic upflow sludge blanket (HUSB) reactor vs. conventional settling) and operational strategy (alternation of saturated/unsaturated phases vs. permanently saturated) on the removal of various emerging organic contaminants (i.e. ibuprofen, diclofenac, acetaminophen, tonalide, oxybenzone, bisphenol A) in horizontal subsurface flow constructed wetlands. For that purpose, a continuous injection experiment was carried out in an experimental treatment plant for 26 days. The plant had 3 treatment lines: a control line (settler-wetland permanently saturated), a batch line (settler-wetland operated with saturate/unsaturated phases) and an anaerobic line (HUSB reactor-wetland permanently saturated). In each line, wetlands had a surface area of 2.95 m(2), a water depth of 25 cm and a granular medium D(60) = 7.3 mm, and were planted with common reed. During the study period the wetlands were operated at a hydraulic and organic load of 25 mm/d and about 4.7 g BOD/m(2)d, respectively. The injection experiment delivered very robust results that show how the occurrence of higher redox potentials within the wetland bed promotes the elimination of conventional quality parameters as well as emerging microcontaminants. Overall, removal efficiencies were always greater for the batch line than for the control and anaerobic lines, and to this respect statistically significantly differences were found for ibuprofen, diclofenac, oxybenzone and bisphenol A. As an example, ibuprofen, whose major removal mechanism has been reported to be biodegradation under aerobic conditions, showed a higher removal in the batch line (85%) than in the control (63%) and anaerobic (52%) lines. Bisphenol A showed also a great dependence on the redox status of the wetlands, finding an 89% removal rate for the batch line, as opposed to the control and anaerobic lines (79 and 65%, respectively). Furthermore, diclofenac showed a greater removal under a higher redox status (70, 48 and 32% in the batch, control and anaerobic lines). Average removal efficiencies of acetaminophen, oxybenzone and tonalide were almost >90% for the 3 treatment lines. The results of this study indicate that the efficiency of horizontal flow constructed wetland systems can be improved by using a batch operation strategy. Furthermore, we tentatively identified 4-hydroxy-diclofenac and carboxy-bisphenol A as intermediate degradation products. The higher abundance of the latter under the batch operation strategy reinforced biodegradation as a relevant bisphenol A removal pathway under higher redox conditions.

Evaluation of artificially-weathered standard fuel oil toxicity by marine invertebrate embryogenesis bioassays.

wWeathering of petroleum spilled in the marine environment may not only change its physical and chemical properties but also its effects on the marine ecosystem. The objective of this study was to evaluate the toxicity of the water-accommodated fraction (WAF) obtained from a standard fuel oil following an environmentally realistic simulated weathering process for a period of 80 d. Experimental flasks with 40 g L(-1) of fuel oil were incubated at 18°C with a 14 h light:10 h dark photoperiod and a photosynthetically active radiation (PAR) intensity of 70 µE m(-2) s(-1). Samples were taken at four weathering periods: 24 h, 7, 21 and 80 d. WAF toxicity was tested using the sea urchin (Paracentrotus lividus) and mussel (Mytilus galloprovincialis) embryo-larval bioassays and the aromatic hydrocarbons levels (AH) in the WAF were measured by gas chromatography/mass spectrometry. In contrast with the classic assumption of toxicity decrease with oil weathering, the present study shows a progressive increase in WAF toxicity with weathering, being the EC(50) after 80d eightfold lower than the EC(50) at day 1, whereas AH concentration slightly decreased. In the long term, inoculation of WAF with bacteria from a hydrocarbon chronically-polluted harbor slightly reduced toxicity. The differences in toxicity between fresh and weathered fuels could not be explained on the basis of the total AH content and the formation of oxidized derivatives is suggested to explain this toxicity increase.

Uptake of organic emergent contaminants in spath and lettuce: an in vitro experiment.

Although a myriad of organic microcontaminants may occur in irrigation waters, little attention has been paid to their incorporation in crops. In this work, a systematic approach to assess the final fate of both ionizable and neutral organic contaminants taken up by plants is described. In vitro uptake of triclosan (TCS), hydrocinnamic acid (HCA), tonalide (TON), ibuprofen (IBF), naproxen (NPX), and clofibric acid (CFA) were studied in lettuce ( Lactuca sativa L) and spath ( Spathiphyllum spp.) as model plants. After 30 days incubation, analyte depletion from the culture medium was 85-99% (lettuce) and 51-81% (spath). HCA, NPX, and CFA exhibited the highest depletion rate in both plant species. Lettuce plant tissue analysis revealed an accumulation of all compounds except for HCA. These compounds reached a peak in tissue concentration followed by a sudden drop, probably due to the plant detoxification system and analyte depletion from the culture medium. Kinetic characterization of the uptake and detoxification processes was fitted to a pseudo-first-order rate. Compounds with a carboxylic group in their structure exhibited higher uptake rates, possibly due to the contribution of an ion trap effect. Molecular weight and log K(ow) played a direct role in uptake in lettuce, as proven by the significant correlation of both properties to depletion and by the correlation of molecular weight to kinetic uptake rates.

Resolution and quantification of complex mixtures of polycyclic aromatic hydrocarbons in heavy fuel oil sample by means of GC × GC-TOFMS combined to multivariate curve resolution.

Comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry (GC × GC-TOFMS) combined to multivariate curve resolution-alternating least-squares (MCR-ALS) is proposed for the resolution and quantification of very complex mixtures of compounds such as polycyclic aromatic hydrocarbons (PAHs) in heavy fuel oil (HFO). Different GC × GC-TOFMS data slices acquired during the analysis of HFO samples and PAH standards were simultaneously analyzed using the MCR-ALS method to resolve the pure component elution profiles in the two chromatographic dimensions as well as their pure mass spectra. Outstandingly, retention time shifts within and between GC × GC runs were not affecting the results obtained using the proposed strategy and proper resolution of strongly coeluted compounds, baseline and background contributions was achieved. Calibration curves built up with standard samples of PAHs allowed the quantification of ten of them in HFO aromatic fractions. Relative errors in their estimated concentrations were in all cases below 6%. The obtained results were compared to those obtained by commercial software provided with GC × GC-TOFMS instruments and to Parallel Factor Analysis (PARAFAC). Inspection of these results showed improvement in terms of data fitting, elution process description, concentration relative errors and relative standard deviations.

Capacity of a horizontal subsurface flow constructed wetland system for the removal of emerging pollutants: an injection experiment.

A continuous injection experiment was implemented in a pilot-scale horizontal subsurface flow constructed wetland system to evaluate the behavior of four pharmaceuticals and personal care products (i.e. ibuprofen, naproxen, diclofenac and tonalide) and a phenolic estrogenic compound (i.e. bisphenol A). The treatment system consisted of an anaerobic reactor as a primary treatment, followed by two 0.65 m² wetlands (B1 and B2) working in parallel and connected to a 1.65 m² wetland (B3) operating in series. Overall removal efficiencies for the selected compounds ranged from 97% to 99%. The response curves of the injected pollutants show that the behavior of these compounds strongly depends on their sorption and biodegradation characteristics. While about 50% of ibuprofen was removed in B1 and B2, 99% was achieved at B3, where the dissolved oxygen concentration was significantly higher (B1-B2=0.5 mg L⁻¹ and B3=5.4 mg L⁻¹). Naproxen and diclofenac were efficiently removed (93%) in B1 and B2, revealing anaerobic degradation as a probable removal mechanism. Moreover, tonalide and bisphenol A were readily removed in the small wetlands (94% and 83%, respectively), where the removal of total suspended solids was 93%. Therefore, given their high hydrophobicity, sorption onto the particulate matter stands for the major removal mechanism. However, the tentative identification of carboxy-bisphenol A as an intermediate degradation product in B3 suggested biodegradation as a relevant bisphenol A removal pathway under aerobic prevailing conditions.

Characterization of benzothiazoles, benzotriazoles and benzosulfonamides in aqueous matrixes by solid-phase extraction followed by comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry.

Benzothiazoles, benzotriazoles and benzosulfonamides are high-production-volume chemicals found in various environmental aqueous samples that should be considered as emerging pollutants. This study examines the suitability of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC x GC-TOF-MS) for the characterization of benzothiazoles, benzotriazoles and benzosulfonamides in aqueous matrices. Solid-phase extraction was optimized in order to ensure the proper preconcentration of these contaminants prior to their analysis. Column selection, in both the first and second dimensions, was optimized to ensure a good chromatographic separation of the target analytes and of the potential interfering compounds extracted from the matrix. Several column phases were tested. The combined power of two-dimensional separation was fully illustrated by identifying minor compounds and avoiding the overestimations usually made by one-dimensional systems. Finally, the suitability of GC x GC-TOF-MS to quantify the aforementioned emerging pollutants was proven by determining those pollutants in several real samples such as river water, effluent from a wastewater treatment plant, and raw sewage.

Development of an analytical procedure for the determination of emerging and priority organic pollutants in leafy vegetables by pressurized solvent extraction followed by GC-MS determination.

A new multiresidue method for the determination of 13 emerging and priority pollutants in lettuce, including pesticides, pharmaceuticals, personal care products, polycyclic aromatic hydrocarbons (PAHs), and phenolic estrogens, has been developed using matrix solid-phase dispersion combined to pressurized fluid extraction (PFE) followed by gas chromatography coupled to mass spectrometry determination. A sequential optimization strategy based on solvent optimization first, followed by experimental design, was performed in order to maximize target analyte extraction with the aid of response surface methodology. Firstly, a full factorial design was applied to choose the significant variables in PFE; extraction time and temperature were found to have the biggest overall effect on response for most of analytes. They were later optimized performing a central composite design and the variable response of these factors was modeled for all analytes. It was found that marked differences in physicochemical nature exerted a strong influence on extraction conditions and yield. Therefore, the effect of parameters on the response was rather different for some compounds. To overcome this conflicting behavior, a multiple response simultaneous optimization was applied using the desirability function to achieve global optimal operating conditions. The optimal conditions were attained at 13.5 min (two extraction cycles) and 104 degrees C in the PFE by using hexane acetone mixture (1:1). Limit of detection and limit of quantitation values were found to be between 6.6 and 58 and 7.6 and 61.7 microg kg(-1), respectively.

Multi-biomarker responses in the freshwater mussel Dreissena polymorpha exposed to polychlorobiphenyls and metals.

Contaminant related changes in behavioral, phase I and II metabolizing enzymes and pro-oxidant/antioxidant processes in the freshwater mussels Dreissena polymorpha exposed to metals and PCBs were assessed. Behavioral and biochemical responses including filtering rates, key phase I, II and antioxidant enzymes and levels of metallothioneins, glutathione, lipid peroxidation and DNA strand breaks were determined in digestive glands of mussels after being exposed to sublethal levels of mercury chloride, methyl mercury, cadmium and Aroclor 1260 during 5 days. In 7 out of 12 responses analyzed, mussels showed significant differences across treatments. Unusual properties of measured ethoxyresorufin-O-deethylase (EROD) activities indicated that mussels lack an inducible CYP1A enzymatic activity. Despite of using similar exposure levels, inorganic and organic mercury showed different biomarker patterns of response with methyl mercury being more bio-available and unable to induce metallothionein proteins. Mussels exposed to Cd presented higher levels of metallothioneins and an enhanced metabolism of glutathione, whereas those exposed to Aroclor showed their antioxidant glutathione peroxidase related enzyme activities inhibited. Although there was evidence for increased lipid peroxidation under exposure to inorganic and organic mercury, only mussels exposed to Aroclor had significant greater levels than those in controls.

Toxicity and phototoxicity of water-accommodated fraction obtained from Prestige fuel oil and Marine fuel oil evaluated by marine bioassays.

Acute toxicity and phototoxicity of heavy fuel oil extracted directly from the sunken tanker Prestige in comparison to a standard Marine fuel oil were evaluated by obtaining the water-accommodated fraction (WAF) and using mussel Mytilus galloprovincialis and sea urchin Paracentrotus lividus embryogenesis bioassays, and copepod Acartia tonsa and fish Cyprinodon variegatus survival bioassays. Aromatic hydrocarbon (AH) levels in WAF were measured by gas chromatography. Prestige WAF was not phototoxic, its median effective concentrations (EC50) were 13% and 10% WAF for mussel and sea urchin respectively, and maximum lethal threshold concentrations (MLTC) were 12% and 50% for copepod and fish respectively. Marine WAF resulted phototoxic for mussel bioassay. EC50s of Marine WAF were 50% for sea urchin in both treatments and 20% for mussel under illumination. Undiluted Marine WAF only caused a 20% decrease in mussel normal larvae. Similar sensitivities were found among sea urchins, mussels and copepods, whilst fish were less sensitive. Unlike Marine WAF, Prestige WAF showed EC50 values at dilutions below 20%, and its toxicity was independent of lighting conditions. The differences in toxicity between both kinds of fuel could not be explained on the basis of total AH content.