RESUMEN
Electro-coagulation floatation (ECF) is a foam-floatation dewatering method that has been shown to be a highly effective, rapid, and scalable separation methodology. In this manuscript, an in-depth analysis of the gas and flocculant levels observed during the process is provided, with microbubbles observed in the 5-80⯵m size range at a concentration of 102-103 bubbles mL-1. Electrolysis of microalgae culture was then observed, demonstrating both effective separation using aluminium electrodes (nine microalgal species tested, 1-40⯵m size range, motile and non-motile, marine and freshwater), and sterilisation of culture through bleaching with inert titanium electrodes. Atomic force microscopy was used to visualise floc formation in the presence and absence of algae, showing nanoscale structures on the magnitude of 40-400â¯nm and entrapped microalgal cells. Improvements to aid industrial biotechnology processing were investigated: protein-doping was found to improve foam stability without inducing cell lysis, and an oxalate buffer wash regime was found to dissolve the flocculant whilst producing no observable difference in the final algal lipid or pigment profiles, leaving the cells viable at the end of the process. ECF separated microalgal culture had an algal biomass loading of 13% and as such was ideal for direct down-stream processing through hydrothermal liquefaction. High bio-crude yields were achieved, though this was reduced slightly on addition of the Al(OH)3 after ECF, with carbon being distributed away to the aqueous and solid residue phases. The amenability and compatibility of ECF to integration with, or replacement of, existing centrifugation and settling processes suggests this process may be of significant interest to the biotechnology industry.
RESUMEN
A polyhydroxybutyrate (PHB) producing cyanobacteria was converted through hydrothermal liquefaction (HTL) into propylene and a bio-oil suitable for advanced biofuel production. HTL of model compounds demonstrated that in contrast to proteins and carbohydrates, no synergistic effects were detected when converting PHB in the presence of algae. Subsequently, Synechocystis cf. salina, which had accumulated 7.5wt% PHB was converted via HTL (15% dry weight loading, 340°C). The reaction gave an overall propylene yield of 2.6%, higher than that obtained from the model compounds, in addition to a bio-oil with a low nitrogen content of 4.6%. No propylene was recovered from the alternative non-PHB producing cyanobacterial strains screened, suggesting that PHB is the source of propylene. PHB producing microorganisms could therefore be used as a feedstock for a biorefinery to produce polypropylene and advanced biofuels, with the level of propylene being proportional to the accumulated amount of PHB.