Quality attributes and evaluation of pharmaceutical glass containers for parenterals.

Pharmaceutical containers for parenterals have been predominantly manufactured using glass as a packaging material of choice, especially Type-I glass, since it has been regarded as a chemically inert and an effective container closure system (CCS). Nevertheless, there have been reports and recalls related to glass quality issues, such as breakage, flakes, and particles observed in marketed products. The novelty of this research is based on the knowledge gathered from our previously conducted risk assessments and establishing a comprehensive testing platform focused on risk factors for glass container failure modes and applicability to other types of pharmaceutical containers. The evaluation of container quality attributes was performed for three model glass vials using a mechanical and chemical durability testing platform: freeze-thaw, lyophilization, compression, scratch tests; visual inspection, pH, particle size analyses, extractable, leachable and imaging studies that were conducted under normal (4 and 25 °C), and stress condition (60 °C), respectively. The performance between the glass containers tested under certain stress conditions (failure modes) were variable and differentiated. The systematic platform testing approach shows the importance of lab-based risk evaluation in assessing common failure modes of pharmaceutical containers, since the quality attributes for injectable products are complex and can impact final product quality.

Novel and rapid LC-MS/MS method for quantitative analysis of methylphenidate in dried blood spots.

AIM: Development and validation of a novel, sensitive, specific and rapid dried blood spots (DBS)-LC-MS/MS method for methylphenidate (MPH), an attention-deficit hyperactivity disorder drug. Methodology & results: Protein precipitation with acetonitrile was used to extract MPH from the DBS cards. Chromatographic separation was achieved on a Zorbax C18 column using an isocratic mobile phase composed of acetonitrile and 5 mM ammonium formate buffer (20:80, v/v) at a flow rate of 0.5 ml/min. MPH was quantified over a linear range of 200-25,000 pg/ml. CONCLUSION: The clinical DBS-LC-MS/MS method was successfully validated as per the US FDA's Bioanalytical Method Validation Guidance to support an ongoing pediatric pharmacokinetic study.

Determination of Non-Transferrin Bound Iron, Transferrin Bound Iron, Drug Bound Iron and Total Iron in Serum in a Rats after IV Administration of Sodium Ferric Gluconate Complex by Simple Ultrafiltration Inductively Coupled Plasma Mass Spectrometric Detection.

A rapid, sensitive and specific ultrafiltration inductively-coupled plasma mass spectrometry (UF-ICP-MSICP-MS) method was developed and validated for the quantification of non-transferrin bound iron (NTBI), transferrin bound iron (TBI), drug bound iron (DI) and total iron (TI) in the same rat serum sample after intravenous (IV) administration of iron gluconate nanoparticles in sucrose solution (Ferrlecit®). Ultrafiltration with a 30 kDa molecular cut-off filter was used for sample cleanup. Different elution solvents were used to separate each form of iron from sample serum. Isolated fractions were subjected to inductively-coupled mass spectrometric analysis after microwave digestion in 4% nitric acid. The reproducibility of the method was evaluated by precision and accuracy. The calibration curve demonstrated linearity from 5-500 ng/mL with a regression (r²) of more than 0.998. This method was effectively implemented to quantify rat pharmacokinetic study samples after intravenous administration of Ferrlecit®. The method was successfully applied to a pharmacokinetic (PK) study of Ferrlecit in rats. The colloidal iron followed first order kinetics with half-life of 2.2 h and reached background or pre-dose levels after 12 h post-dosing. The drug shown a clearance of 0.31 mL/min/kg and volume of distribution of 0.05 L/kg. 19.4 ± 2.4 mL/h/kg.

Comparative Evaluation of U.S. Brand and Generic Intravenous Sodium Ferric Gluconate Complex in Sucrose Injection: Biodistribution after Intravenous Dosing in Rats.

Relative biodistribution of FDA-approved innovator and generic sodium ferric gluconate (SFG) drug products was investigated to identify differences in tissue distribution of iron after intravenous dosing to rats. Three equal cohorts of 42 male Sprague-Dawley rats were created with each cohort receiving one of three treatments: (1) the innovator SFG product dosed intravenously at a concentration of 40 mg/kg; (2) the generic SFG product dosed intravenously at a concentration of 40 mg/kg; (3) saline dosed intravenously at equivalent volume to SFG products. Sampling time points were 15 min, 1 h, 8 h, 1 week, two weeks, four weeks, and six weeks post-treatment. Six rats from each group were sacrificed at each time point. Serum, femoral bone marrow, lungs, brain, heart, kidneys, liver, and spleen were harvested and evaluated for total iron concentration by ICP-MS. The ICP-MS analytical method was validated with linearity, range, accuracy, and precision. Results were determined for mean iron concentrations (µg/g) and mean total iron (whole tissue) content (µg/tissue) for each tissue of all groups at each time point. A percent of total distribution to each tissue was calculated for both products. At any given time point, the overall percent iron concentration distribution did not vary between the two SFG drugs by more than 7% in any tissue. Overall, this study demonstrated similar tissue biodistribution for the two SFG products in the examined tissues.

Investigating Differences in Gas-Phase Conformations of 25-Hydroxyvitamin D3 Sodiated Epimers using Ion Mobility-Mass Spectrometry and Theoretical Modeling.

Drift tube ion mobility coupled with mass spectrometry was used to investigate the gas-phase structure of 25-hydroxyvitamin D3 (25OHD3) and D2 (25OHD2) epimers, and to evaluate its potential in rapid separation of these compounds. Experimental results revealed two distinct drift species for the 25OHD3 sodiated monomer, whereas only one of these conformations was observed for its epimer (epi25OHD3). The unique species allowed 25OHD3 to be readily distinguished, and the same pattern was observed for 25OHD2 epimers. Theoretical modeling of 25OHD3 epimers identified energetically stable gas-phase structures, indicating that both compounds may adopt a compact "closed" conformation, but that 25OHD3 may also adopt a slightly less energetically favorable "open" conformation that is not accessible to its epimer. Calculated theoretical collision cross-sections for these structures agreed with experimental results to <2%. Experimentation indicated that additional energy in the ESI source (i.e., increased temperature, spray voltage) affected the ratio of 25OHD3 conformations, with the less energetically favorable "open" conformation increasing in relative intensity. Finally, LC-IM-MS results yielded linear quantitation of 25OHD3, in the presence of the epimer interference, at biologically relevant concentrations. This study demonstrates that ion mobility can be used in tandem with theoretical modeling to determine structural differences that contribute to drift separation. These separation capabilities provide potential for rapid (<60 ms) identification of 25OHD3 and 25OHD2 in mixtures with their epimers. Graphical Abstract ᅟ.

Portable FAIMS: Applications and Future Perspectives.

Miniaturized mass spectrometry (MMS) is optimal for a wide variety of applications that benefit from field-portable instrumentation. Like MMS, field asymmetric ion mobility spectrometry (FAIMS) has proven capable of providing in situ analysis, allowing researchers to bring the lab to the sample. FAIMS compliments MMS very well, but has the added benefit of operating at atmospheric pressure, unlike MS. This distinct advantage makes FAIMS uniquely suited for portability. Since its inception, FAIMS has been envisioned as a field-portable device, as it affords less expense and greater simplicity than many similar methods. Ideally, these are simple, robust devices that may be operated by non-professional personnel, yet still provide adequate data when in the field. While reducing the size and complexity tends to bring with it a loss of performance and accuracy, this is made up for by the incredibly high throughput and overall convenience of the instrument. Moreover, the FAIMS device used in the field can be brought back to the lab, and coupled to a conventional mass spectrometer to provide any necessary method development and compound validation. This work discusses the various considerations, uses, and applications for portable FAIMS instrumentation, and how the future of each applicable field may benefit from the development and acceptance of such a device.

Ion Mobility in Clinical Analysis: Current Progress and Future Perspectives.

BACKGROUND: Ion mobility spectrometry (IMS) is a rapid separation tool that can be coupled with several sampling/ionization methods, other separation techniques (e.g., chromatography), and various detectors (e.g., mass spectrometry). This technique has become increasingly used in the last 2 decades for applications ranging from illicit drug and chemical warfare agent detection to structural characterization of biological macromolecules such as proteins. Because of its rapid speed of analysis, IMS has recently been investigated for its potential use in clinical laboratories. CONTENT: This review article first provides a brief introduction to ion mobility operating principles and instrumentation. Several current applications will then be detailed, including investigation of rapid ambient sampling from exhaled breath and other volatile compounds and mass spectrometric imaging for localization of target compounds. Additionally, current ion mobility research in relevant fields (i.e., metabolomics) will be discussed as it pertains to potential future application in clinical settings. SUMMARY: This review article provides the authors' perspective on the future of ion mobility implementation in the clinical setting, with a focus on ambient sampling methods that allow IMS to be used as a "bedside" standalone technique for rapid disease screening and methods for improving the analysis of complex biological samples such as blood plasma and urine.