RESUMEN
Tailoring a material's surface with hierarchical structures from the micro- to the nanoscale is key for fabricating highly sensitive detection platforms. To achieve this, the fabrication method should be simple, inexpensive, and yield materials with a high density of surface features. Here, using benchtop fabrication techniques, gold surfaces with hierarchically structured roughness are generated for sensing applications. Hierarchical gold electrodes are prepared on pre-stressed polystyrene substrates via electroless deposition and amperometric pulsing. Electrodes fabricated using 1 mm H[AuCl4] and roughened with 80 pulses revealed the highest electroactive surface area. These electrodes are used for enzyme-free detection of glucose in the presence of bovine serum albumin and achieved a limit of detection of 0.36 mm, below glucose concentrations in human blood. The surfaces nanoroughened with 100 pulses also showed excellent surface-enhanced Raman scattering (SERS) response for the detection of rhodamine 6G, with an enhancement factor of ≈2 × 106 compared to detection in solution, and for the detection of a self-assembled monolayer of thiophenol, with an enhancement factor of ≈30 compared to the response from microstructured gold surfaces. It is envisioned that the simplicity and low fabrication cost of these gold-roughened structures will expedite the development of electrochemical and SERS sensing devices.
RESUMEN
A key challenge for sensor miniaturization is to create electrodes with smaller footprints, while maintaining or increasing sensitivity. In this work, the electroactive surface of gold electrodes was enhanced 30-fold by wrinkling followed by chronoamperometric (CA) pulsing. Electron microscopy showed increased surface roughness in response to an increased number of CA pulses. The nanoroughened electrodes also showed excellent fouling resistance when submerged in solutions containing bovine serum albumin. The nanoroughened electrodes were used for electrochemical detection of Cu2+ in tap water and of glucose in human blood plasma. In the latter case, the nanoroughened electrodes allowed highly sensitive enzyme-free sensing of glucose, with responses comparable to those of two commercial enzyme-based sensors. We anticipate that this methodology to fabricate nanostructured electrodes can accelerate the development of simple, cost-effective, and high sensitivity electrochemical platforms.
