Mechanical Memory Impairs Adipose-Derived Stem Cell (ASC) Adipogenic Capacity After Long-Term In Vitro Expansion.

INTRODUCTION: Adipose derived stem cells (ASCs) hold great promise for clinical applications such as soft tissue regeneration and for in vitro tissue models and are notably easy to derive in large numbers. Specifically, ASCs provide an advantage for in vitro models of adipose tissue, where they can be employed as tissue specific cells and for patient specific models. However, ASC in vitro expansion may unintentionally reduce adipogenic capacity due to the stiffness of tissue culture plastic (TCPS). METHODS: Here, we expanded freshly isolated ASCs on soft and stiff substrates for 4 passages before adipogenic differentiation. At the last passage we swapped the substrate from stiff to soft, or soft to stiff to determine if short term exposure to a different substrate altered adipogenic capacity. RESULTS: Expansion on stiff substrates reduced adipogenic capacity by 50% which was not rescued by swapping to a soft substrate for the last passage. Stiff substrates had greater nuclear area and gene expression of nesprin-2, a protein that mediates the tension of the nuclear envelope by tethering it to the actin cytoskeleton. Upon swapping to a soft substrate, the nuclear area was reduced but nesprin-2 levels did not fully recover, which differentially regulated cell commitment transcriptional factors. CONCLUSION: Therefore, in vitro expansion on stiff substrates must be carefully considered when the end-goal of the expansion is for adipose tissue or soft tissue applications.

Hypoxia induces stress fiber formation in adipocytes in the early stage of obesity.

In obese adipose tissue (AT), hypertrophic expansion of adipocytes is not matched by new vessel formation, leading to AT hypoxia. As a result, hypoxia inducible factor-1⍺ (HIF-1⍺) accumulates in adipocytes inducing a transcriptional program that upregulates profibrotic genes and biosynthetic enzymes such as lysyl oxidase (LOX) synthesis. This excess synthesis and crosslinking of extracellular matrix (ECM) components cause AT fibrosis. Although fibrosis is a hallmark of obese AT, the role of fibroblasts, cells known to regulate fibrosis in other fibrosis-prone tissues, is not well studied. Here we have developed an in vitro model of AT to study adipocyte-fibroblast crosstalk in a hypoxic environment. Further, this in vitro model was used to investigate the effect of hypoxia on adipocyte mechanical properties via ras homolog gene family member A (RhoA)/Rho-associated coiled-coil kinases (ROCK) signaling pathways. We confirmed that hypoxia creates a diseased phenotype by inhibiting adipocyte maturation and inducing actin stress fiber formation facilitated by myocardin-related transcription factor A (MRTF-A/MKL1) nuclear translocation. This work presents new potential therapeutic targets for obesity by improving adipocyte maturation and limiting mechanical stress in obese AT.

Collagen Stiffness and Architecture Regulate Fibrotic Gene Expression in Engineered Adipose Tissue.

Adipose tissue (AT) has a dynamic extracellular matrix (ECM) surrounding adipocytes that allows for remodeling during metabolic fluctuations. During the progression of obesity, AT has increased ECM deposition, stiffening, and remodeling, resulting in a pro-fibrotic dysfunctional state. Here, the incorporation of ethylene glycol-bis-succinic acid N-hydroxysuccinimide ester (PEGDS) allows for control over 3D collagen hydrogel stiffness and architecture to investigate its influence on adipocyte metabolic and fibrotic function. Upon stiffening and altering ECM architecture, adipocytes did not alter their expression of key adipokines, leptin, and adiponectin. However, they do increase actin cytoskeletal fiber formation, pro-fibrotic gene expression, ECM deposition, and remodeling within a stiffer, 3D collagen hydrogel. For example, COL6A3 gene expression is upregulated approximately twofold, resulting in increased deposition of pericellular collagen VI alpha 3 surrounding adipocytes. Furthermore, inhibition of actin contractility results in a reversal of pro-fibrotic gene expression and ECM deposition, indicating that adipocytes are mediating mechanical cues through actin cytoskeletal networks. This study demonstrates that ECM stiffness and architecture plays a critical regulatory role in adipocyte fibrotic function and contributes to the overall pro-fibrotic dysfunctional state of AT during the progression of obesity and AT fibrosis.

Endothelial cell crosstalk improves browning but hinders white adipocyte maturation in 3D engineered adipose tissue.

Central to the development of adipose tissue (AT) engineered models is the supporting vasculature. It is a key part of AT function and long-term maintenance, but the crosstalk between adipocytes and endothelial cells is not well understood. Here, we directly co-culture the two cell types at varying ratios in a 3D Type I collagen gel. Constructs were evaluated for adipocyte maturation and function and vascular network organization. Further, these constructs were treated with forskolin, a beta-adrenergic agonist, to stimulate lipolysis and browning. Adipocytes in co-cultures were found to be less mature than an adipocyte-only control, shown by smaller lipid droplets and downregulation of key adipocyte-related genes. The most extensive vascular network formation was found in the 1:1 co-culture, supported by vascular endothelial growth factor (VEGF) upregulation. After forskolin treatment, the presence of endothelial cells was shown to upregulate PPAR coactivator 1 alpha (PGC-1α) and leptin, but not uncoupling protein 1 (UCP1), suggesting a specific crosstalk that enhances early stages of browning.

Injectable silk foams for soft tissue regeneration.

Soft tissue fillers are needed for restoration of a defect or augmentation of existing tissues. Autografts and lipotransfer have been under study for soft tissue reconstruction but yield inconsistent results, often with considerable resorption of the grafted tissue. A minimally invasive procedure would reduce scarring and recovery time as well as allow the implant and/or grafted tissue to be placed closer to existing vasculature. Here, the feasibility of an injectable silk foam for soft tissue regeneration is demonstrated. Adipose-derived stem cells survive and migrate through the foam over a 10-d period in vitro. The silk foams are also successfully injected into the subcutaneous space in a rat and over a 3-month period integrating with the surrounding native tissue. The injected foams are palpable and soft to the touch through the skin and returning to their original dimensions after pressure is applied and then released. The foams readily absorb lipoaspirate making the foams useful as a scaffold or template for existing soft tissue filler technologies, useful either as a biomaterial alone or in combination with the lipoaspirate.

Forms, forces, and stem cell fate.

Cells change their shape and mechanics dramatically during development and tissue healing in response to morphogens, cell-cell contact, adhesion to extracellular matrix, and more. Several regulatory links have been described between cell shape, cytoskeletal tension, matrix adhesiveness and stiffness, and recent studies have begun to uncover how these mechanotransduction pathways can impact transcriptional signaling and cell fate decision. The integrated mechanisms linking cell forces, form and fate are likely critical for driving normal morphogenesis, tissue development, and healing. Dysregulation of these mechanisms may also tip the scale from normal to diseased states. Here, we highlight mechanisms that alter cell shape and mechanics, and the pathways affected by these changes.

Prevention of peritoneal adhesions using polymeric rheological blends.

The effectiveness of rheological blends of high molecular weight hyaluronic acid (HA) and low molecular weight hydroxypropyl methylcellulose (HPMC) in the prevention of peritoneal adhesions post-surgery is demonstrated. The physical mixture of the two carbohydrates increased the dwell time in the peritoneum while significantly improving the injectability of the polymer compared with HA alone. HA-HPMC treatment decreased the total adhesion area by ∼ 70% relative to a saline control or no treatment in a repeated cecal injury model in the rabbit. No significant cytotoxicity and minimal inflammation were associated with the blend. Furthermore, no chemical or physical processing was required prior to their use beyond simple mixing.

Sustained volume retention in vivo with adipocyte and lipoaspirate seeded silk scaffolds.

Current approaches to soft tissue regeneration include the use of fat grafts, natural or synthetic biomaterials as filler materials. Fat grafts and natural biomaterials resorb too quickly to maintain tissue regeneration, while synthetic materials do not degrade or regenerate tissue. Here, we present a simple approach to volume stable filling of soft tissue defects. In this study, we combined lipoaspirate with a silk protein matrix in a subcutaneous rat model. Silk biomaterials can be tailored to fit a variety of needs, and here were processed silk biomaterials into a porous sponge format to allow for tissue ingrowth while remaining mechanically robust. Over an 18 month period, the lipoaspirate seeded silk protein matrix regenerated subcutaneous adipose tissue while maintaining the original implanted volume. A silk protein matrix alone was not sufficient to regenerate adipose tissue, but yielded a fibrous tissue, although implanted volume was maintained. This work presents a significant improvement to the standard approaches to filling soft tissue defects by matching biomaterial degradation and tissue regeneration profiles.

Sustainable three-dimensional tissue model of human adipose tissue.

The need for physiologically relevant sustainable human adipose tissue models is crucial for understanding tissue development, disease progression, in vitro drug development and soft tissue regeneration. The coculture of adipocytes differentiated from human adipose-derived stem cells, with endothelial cells, on porous silk protein matrices for at least 6 months is reported, while maintaining adipose-like outcomes. Cultures were assessed for structure and morphology (Oil Red O content and CD31 expression), metabolic functions (leptin, glycerol production, gene expression for GLUT4, and PPARγ) and cell replication (DNA content). The cocultures maintained size and shape over this extended period in static cultures, while increasing in diameter by 12.5% in spinner flask culture. Spinner flask cultures yielded improved adipose tissue outcomes overall, based on structure and function, when compared to the static cultures. This work establishes a tissue model system that can be applied to the development of chronic metabolic dysfunction systems associated with human adipose tissue, such as obesity and diabetes, due to the long term sustainable functions demonstrated here.

Noninvasive metabolic imaging of engineered 3D human adipose tissue in a perfusion bioreactor.

The efficacy and economy of most in vitro human models used in research is limited by the lack of a physiologically-relevant three-dimensional perfused environment and the inability to noninvasively quantify the structural and biochemical characteristics of the tissue. The goal of this project was to develop a perfusion bioreactor system compatible with two-photon imaging to noninvasively assess tissue engineered human adipose tissue structure and function in vitro. Three-dimensional (3D) vascularized human adipose tissues were engineered in vitro, before being introduced to a perfusion environment and tracked over time by automated quantification of endogenous markers of metabolism using two-photon excited fluorescence (TPEF). Depth-resolved image stacks were analyzed for redox ratio metabolic profiling and compared to prior analyses performed on 3D engineered adipose tissue in static culture. Traditional assessments with H&E staining were used to qualitatively measure extracellular matrix generation and cell density with respect to location within the tissue. The distribution of cells within the tissue and average cellular redox ratios were different between static and perfusion cultures, while the trends of decreased redox ratio and increased cellular proliferation with time in both static and perfusion cultures were similar. These results establish a basis for noninvasive optical tracking of tissue structure and function in vitro, which can be applied to future studies to assess tissue development or drug toxicity screening and disease progression.

Functionalized silk biomaterials for wound healing.

Silk protein-biomaterial wound dressings with epidermal growth factor (EGF) and silver sulfadiazine were studied with a cutaneous excisional mouse wound model. Three different material designs and two different drug incorporation techniques were studied to compare wound healing responses. Material formats included silk films, lamellar porous silk films and electrospun silk nanofibers, each studied with the silk matrix alone and with drug loading or drug coatings on the silk matrices. Changes in wound size and histological assessments of wound tissues showed that the functionalized silk biomaterial wound dressings increased wound healing rate, including reepithelialization, dermis proliferation, collagen synthesis and reduced scar formation, when compared to air-permeable Tegaderm tape (3M) (- control) and a commercial wound dressing, Tegaderm Hydrocolloid dressing (3M) (+ control). All silk biomaterials were effective for wound healing, while the lamellar porous films and electrospun nanofibers and the incorporation of EGF/silver sulfadiazine, via drug loading or coating, provided the most rapid wound healing responses. This systematic approach to evaluating functionalized silk biomaterial wound dressings demonstrates a useful strategy to select formulations for further study towards new treatment options for chronic wounds.

In vitro 3D full-thickness skin-equivalent tissue model using silk and collagen biomaterials.

Current approaches to skin equivalents often only include the epidermis and dermis. Here, a full-thickness skin equivalent is described including epidermis, dermis, and hypodermis, that could serve as an in vitro model for studying skin biology or as a platform for consumer product testing. The construct is easy to handle and is maintained for >14 d while expressing physiological morphologies of the epidermis and dermis, seen by keratin 10, collagens I and IV expression. The skin equivalent produces glycerol and leptin, markers of adipose metabolism. This work serves as a foundation for understanding a few necessary factors needed to develop a stable, functional model of full-thickness skin.

Characterization of metabolic changes associated with the functional development of 3D engineered tissues by non-invasive, dynamic measurement of individual cell redox ratios.

Non-invasive approaches to assess tissue function could improve significantly current methods to diagnose diseases and optimize engineered tissues. In this study, we describe a two-photon excited fluorescence microscopy approach that relies entirely on endogenous fluorophores to dynamically quantify functional metabolic readouts from individual cells within three-dimensional engineered tissues undergoing adipogenic differentiation over six months. Specifically, we employ an automated approach to analyze 3D image volumes and extract a redox ratio of metabolic cofactors. We identify a decrease in redox ratio over the first two months of culture that is associated with stem cell differentiation and lipogenesis. In addition, we demonstrate that the presence of endothelial cells facilitate greater cell numbers deeper within the engineered tissues. Since traditional assessments of engineered tissue structure and function are destructive and logistically intensive, this non-destructive, label-free approach offers a potentially powerful high-content characterization tool for optimizing tissue engineering protocols and assessing engineered tissue implants.

Lipolytic function of adipocyte/endothelial cocultures.

The rising incidence of adipose-related disorders such as obesity has prompted increased interest in the in vitro development of functional human soft tissues to study the disease and treatment options. Further, soft tissues maintained in vitro with a capacity to resemble in vivo tissues in structure and metabolic function would help gain insight into mechanisms involved in adipose tissue development. In the current study, the metabolic potential of adipose/endothelial cocultures on three-dimensional silk fibroin scaffolds was studied. Endothelial contributions to adipose lipogenesis and lipolysis were the focus of the study. Triglyceride accumulation, adipogenic gene transcript expression, and basal lipolysis measurements demonstrated the ability of this coculture system to retain metabolic levels obtained in adipocyte monocultures. Additionally, basal lipolysis was stimulated in mono- and coculture systems to a similar extent at 1.6- and 1.9-fold over controls, respectively. The ability to maintain adipose functions in these cocultures represents a step forward in the development of a tissue-engineered adipose tissue system exhibiting both endothelial lumens and metabolic functions.

Adipogenic differentiation of human adipose-derived stem cells on 3D silk scaffolds.

Current treatment modalities for soft tissue defects due to various pathologies and trauma include autologous grafting and the use of commercially available fillers. However, these treatment methods are associated with a number of limitations, such as donor site morbidity and volume loss over time. As such, improved therapeutic options are needed. Tissue engineering techniques offer novel solutions to these problems through development of bioactive tissue constructs that can regenerate adipose tissue with an appropriate structure and function. The recent advances in the derivation and characterization of hASCs have led to numerous studies of soft tissue reconstruction. In this chapter, we discuss methods in which our laboratory has used hASCs and silk scaffolds for adipose tissue engineering. The use of naturally occurring and clinically acceptable materials such as silk protein for tissue-engineering applications poses advantages with respect to biocompatibility and mechanical and biological properties.

Rheological blends for drug delivery. II. Prolongation of nerve blockade, biocompatibility, and in vitro-in vivo correlations.

Rheological polymer blends of hyaluronic acid (HA) and hydroxypropylmethyl cellulose (HPMC) were evaluated as prolonged duration delivery vehicles for local anesthetics using a rat sciatic nerve blockade model. HA-HPMC blends extended the duration of sensory block approximately threefold compared to that achieved using a bupivacaine solution. Blending HA and HPMC facilitated the injection of higher polymer concentration delivery vehicles and reduced the rate of polymer hydration compared to HA solutions, enabling prolonged drug release. The duration of effective nerve block was correlated with each of the zero shear viscosity, polymer concentration, yield stress, and gel point frequency of the blends, while a two-parameter model correlating duration of nerve block with zero shear viscosity and humectancy provided improved fits to the in vivo data compared to any single variable alone. The blends exhibited no cytotoxicity and induced only a mild short-term inflammatory reaction in vivo at the site of injection, with all blends largely resorbed 4 days postinjection.

Effect of chemical permeation enhancers on nerve blockade.

Chemical permeation enhancers (CPEs) have the potential to improve access of local anesthetics to the nerve, thereby improving nerve block performance. We assessed the effects of six CPEs on nerve blockade from tetrodotoxin (TTX) and from bupivacaine. Each of the six surfactants, representing three CPE subgroups (anionic, cationic, and nonionic surfactants) was coinjected with TTX or bupivacaine at the sciatic nerve of Sprague-Dawley rats. Myotoxicity of CPEs, alone and with TTX, was assessed in vitro in C2C12 myotubes and in vivo via histological analysis. All enhancers produced marked concentration-dependent improvements in the frequency and duration of block with TTX but not bupivacaine. An in vitro toxicity assay showed a wide range of CPE myotoxicity, but in vivo histological assessment showed no signs of muscle or nerve damage at concentrations of CPEs that produced a half-maximal increase in the duration of block of TTX (except in the case of the cationic surfactant DDAB). This study demonstrates that CPEs can provide marked prolongation of nerve blockade from TTX but not bupivacaine, without apparent local tissue toxicity. These results may enhance the clinical applicability of TTX for prolonged-duration local anesthesia.

Microparticles for inhalational delivery of antipseudomonal antibiotics.

Chronic pseudomonal bronchopulmonary infections in cystic fibrosis patients are frequently controlled with inhaled antibiotics. Dry-powder inhalable antibiotics are an attractive alternative to nebulized medications. We produced and evaluated microparticles composed of dipalmitoylphosphatidylcholine, albumin, and lactose as a model system for intrapulmonary delivery of ceftazidime, ciprofloxacin, and several combinations of the two, none of which is presently available for inhalation. Microparticles containing one or both antibiotics were prepared by spray-drying. Their Anderson cascade impactor deposition profiles showed 10-30% fine particle fractions of the nominal dose. Microparticles containing varying amounts of each antibiotic showed statistically different deposition profiles. Aerodynamics and deposition of microparticles co-encapsulating both antibiotics were similar to those of single-drug microparticles with the same proportion of ciprofloxacin alone. The antipseudomonal activities of microparticles co-encapsulating half of the 50% effective concentration (EC(50)) of both ceftazidime and ciprofloxacin (5 mg of particles containing 5% ceftazidime and 10% ciprofloxacin) were at least additive compared to particles containing the EC(50) of each antibiotic separately (5 mg of particles containing 10% ceftazidime or 5 mg of particles containing 20% ciprofloxacin). Co-encapsulation of the antibiotics in microparticles ensures co-deposition at desired ratios, improves the particles' aerodynamics and fine particle fraction, as compared to microparticles with equivalent amounts of ceftazidime alone, and achieves additive antipseudomonal activity.

Local myotoxicity from sustained release of bupivacaine from microparticles.

BACKGROUND: Sustained release of local anesthetics is frequently associated with myotoxicity. The authors investigated the role of particulate delivery systems and of the pattern of drug release in causing myotoxicity. METHODS: Rats were given sciatic nerve blocks with bupivacaine solutions, two types of bupivacaine-containing microparticles (polymeric microspheres and lipid-protein-sugar particles), or blank particles with or without bupivacaine in the carrier fluid. Myotoxicity was scored in histologic sections of the injection sites. Bupivacaine release kinetics from the particles were measured. Myotoxicity of a range of bupivacaine concentrations from exposures up to 3 weeks was assessed in C2C12 myotubes, with or without microparticles. RESULTS: Both types of bupivacaine-loaded microparticles, but not blank particles, were associated with myotoxicity. Whereas 0.5% bupivacaine solution caused little myotoxicity, a concentration of bupivacaine that mimicked the amount of bupivacaine released initially from particles caused myotoxicity. Local anesthetics showed both concentration and time-dependent myotoxicity in C2C12s. Importantly, even very low concentrations that were nontoxic over brief exposures became highly toxic after days or weeks of exposure. The presence of particles did not increase bupivacaine myotoxicity in vitro but did in vivo. Findings applied to both particle types. CONCLUSIONS: Whereas the release vehicles themselves were not myotoxic, both burst and extended release of bupivacaine were. A possible implication of the latter finding is that myotoxicity is an inevitable concomitant of sustained release of local anesthetics. Particles, and perhaps other vehicles, may enhance local toxicity through indirect mechanisms.

Spray-dried lipid-hyaluronan-polymethacrylate microparticles for drug delivery in the peritoneum.

Application of controlled release technology to the peritoneum would allow for sustained drug levels. However, some polymeric systems either create adhesions, or rapidly exit the peritoneum; neither result is desirable. Here we have produced particles based on sphyngomyelin, a phospholipid that occurs naturally in the peritoneum, along with hyaluronic acid and the polymethacrylate Eudragit E100 (to modulate drug release). Particles with a low proportion of E100 (5% (w/w); "high SPM") release albumin rapidly over 2 days, then more slowly; increasing the E100 to 20% (w/w; high "E100") slowed drug release markedly. When injected in the murine peritoneum, high SPM particles were disseminated as free particles, without forming collections. There was a mild inflammatory response but no formation of adhesions. High E100 particles formed collections in all animals, with an intense inflammatory response. Even so, there were very few adhesions. These results suggest that microparticulate formulations can be produced that have acceptable drug-releasing properties and are suitable for use in the peritoneum from the standpoint of biocompatibility.