High-Resolution Characterization of Enamel Remineralization using Time-of-Flight Secondary Ion Mass Spectrometry and Electron Microscopy.

The aim of this in vitro study was to assess the suitability of high-resolution time-of-flight secondary-ion mass spectrometry (ToF-SIMS) for visualizing cross-sectional changes in human enamel microstructure and chemical composition during treatment and remineralization cycling of artificially generated caries lesions underneath an artificial plaque. Treatments consisted of exposure to twice daily toothpaste/water slurries prepared from 0, 1100, and 5000 µg/g fluoride (F) NaF/Silica toothpastes. In addition, treatments with slurries prepared from 1100 µg/g F SnF2/Silica toothpastes were done using 44Ca in the remineralization solution to allow for differentiation of newly formed mineral and exploration of incorporated metal dopants using ToF-SIMS. Complementary microhardness, scanning electron microscopy, and high-resolution transmission electron microscopy (HR-TEM) investigations were performed on enamel cross-sections. HR-TEM was used for the first time to determine the change in crystallinity during remineralization revealing distinct microstructural zones within one lesion. Chemical mapping using ToF-SIMS demonstrated that the distribution of F, while observed primarily in the new mineral phase, was widespread throughout the lesion with 44Ca substantially limited to the remineralizing mineral. Both penetrated the inter-rod spaces of the sound enamel illustrating how acid damage propagates into the native mineral as the caries lesion deepens. HR-TEM examination revealed different regions within the lesion characterized by distinct micro- and ultra-structures. Importantly, HR-TEM revealed a return of crystallinity following remineralization. Fluoride dose response observations verified the ability of these high-resolution techniques to differentiate remineralization efficacy. The collective results provided new insights such as the visualization of fluoride or calcium penetration pathways, as well as new tools to study the caries process.

Material-specific high-resolution table-top extreme ultraviolet microscopy.

Microscopy with extreme ultraviolet (EUV) radiation holds promise for high-resolution imaging with excellent material contrast, due to the short wavelength and numerous element-specific absorption edges available in this spectral range. At the same time, EUV radiation has significantly larger penetration depths than electrons. It thus enables a nano-scale view into complex three-dimensional structures that are important for material science, semiconductor metrology, and next-generation nano-devices. Here, we present high-resolution and material-specific microscopy at 13.5 nm wavelength. We combine a highly stable, high photon-flux, table-top EUV source with an interferometrically stabilized ptychography setup. By utilizing structured EUV illumination, we overcome the limitations of conventional EUV focusing optics and demonstrate high-resolution microscopy at a half-pitch lateral resolution of 16 nm. Moreover, we propose mixed-state orthogonal probe relaxation ptychography, enabling robust phase-contrast imaging over wide fields of view and long acquisition times. In this way, the complex transmission of an integrated circuit is precisely reconstructed, allowing for the classification of the material composition of mesoscopic semiconductor systems.

Sr[Li2Al2O2N2]:Eu2+-A high performance red phosphor to brighten the future.

Innovative materials for phosphor converted white light-emitting diodes are in high demand owing to the huge potential of the light-emitting diode technology to reduce energy consumption worldwide. As the primary blue diode is already highly optimized, the conversion phosphors are of crucial importance for any further improvements. We report on the discovery of the high performance red phosphor Sr[Li2Al2O2N2]:Eu2+ meeting all requirements for a phosphor's optical properties. It combines the optimal spectral position for a red phosphor, as defined in the 2016 Research & Development-plan of the United States government, with an exceptionally small spectral full width at half maximum and excellent thermal stability. A white mid-power phosphor-converted light-emitting diode prototype utilising Sr[Li2Al2O2N2]:Eu2+ shows an increase of 16% in luminous efficacy compared to currently available commercial high colour-rendering phosphor-converted light-emitting diodes, while retaining excellent high colour rendition. This phosphor enables a big leap in energy efficiency of white emitting phosphor-converted light-emitting-diodes.

Redox effects and formation of gold nanoparticles for the nucleation of low thermal expansion phases from BaO/SrO/ZnO/SiO2 glasses.

Glasses in the system BaO/SrO/ZnO/SiO2 containing 0.01 and 0.1 mol% gold were used to study the formation of gold nanoparticles with the aim to use them as nucleation agents. In order to promote gold clustering, the glasses were additionally doped with 0.5 mol% Sb2O3. Depending on the heat treatment schedule, Au particle sizes were in the range from 6 to above 50 nm. In contrast to many other gold ruby glass systems, the clustering is completely prevented by the absence of antimony; then the glasses remain colorless. Surprisingly, at higher temperatures, a re-dissolution of gold clusters was also observed, which now allows the formulation of a more comprehensive model concerning the redox and clustering behavior. This growth model is completed by the fact that a high gold concentration enables the stabilization of much smaller Au clusters. Mie theory with the aid of quantum confined size-dependent dielectric functions was successfully used to describe the optical behavior of the gold nanoparticles also for sizes below 10 nm. These results were confirmed using high resolution scanning transmission electron microscopy, including energy dispersive X-ray spectroscopy. It could also be shown that small gold particles up to a size of 50 nm are not effective as nucleating agents.

Synergistic Toxicity of Copper and Gold Compounds in Cupriavidus metallidurans.

The bacterium Cupriavidus metallidurans can reduce toxic gold(I/III) complexes and biomineralize them into metallic gold (Au) nanoparticles, thereby mediating the (trans)formation of Au nuggets. In Au-rich soils, most transition metals do not interfere with the resistance of this bacterium to toxic mobile Au complexes and can be removed from the cell by plasmid-encoded metal efflux systems. Copper is a noticeable exception: the presence of Au complexes and Cu ions results in synergistic toxicity, which is accompanied by an increased cytoplasmic Cu content and formation of Au nanoparticles in the periplasm. The periplasmic Cu-oxidase CopA was not essential for formation of the periplasmic Au nanoparticles. As shown with the purified and reconstituted Cu efflux system CupA, Au complexes block Cu-dependent release of phosphate from ATP by CupA, indicating inhibition of Cu transport. Moreover, Cu resistance of Au-inhibited cells was similar to that of mutants carrying deletions in the genes for the Cu-exporting PIB1-type ATPases. Consequently, Au complexes inhibit export of cytoplasmic Cu ions, leading to an increased cellular Cu content and decreased Cu and Au resistance. Uncovering the biochemical mechanisms of synergistic Au and Cu toxicity in C. metallidurans explains the issues this bacterium has to face in auriferous environments, where it is an important contributor to the environmental Au cycle.IMPORTANCEC. metallidurans lives in metal-rich environments, including auriferous soils that contain a mixture of toxic transition metal cations. We demonstrate here that copper ions and gold complexes exert synergistic toxicity because gold ions inhibit the copper-exporting P-type ATPase CupA, which is central to copper resistance in this bacterium. Such a situation should occur in soils overlying Au deposits, in which Cu/Au ratios usually are ≫1. Appreciating how C. metallidurans solves the problem of living in environments that contain both Au and Cu is a prerequisite to understand the molecular mechanisms underlying gold cycling in the environment, and the significance and opportunities of microbiota for specific targeting to Au in mineral exploration and ore processing.

Morphological Characterization of the Self-Assembly of Virus Movement Proteins into Nanotubes in the Absence of Virus Particles.

One infection mechanism of plant viruses is the generation of nanotubes by viral movement proteins, allowing cell-to-cell virus particle transport. Previously, it was assumed that viral nanotubes extend directly from the host-cell plasma membrane. In virus-infected plants, these nanotubes reach an extraordinary diameter:length ratio (≈100 nm:µm or mm range). Here, viral nanotubes are produced in a transient protoplast system; the coding sequence for alfalfa mosaic virus movement protein is translationally fused to green fluorescent protein. The maximum extension of viral nanotubes into the culture medium is achieved 24-48 h posttransfection, with lengths in the micro- and millimeter ranges. Scanning electron microscopy and transmission electron microscopy show that strong inhomogeneous viral nanotubes are formed compared to particle-filled systems. The nanotubes have similar length, but fluctuating wall thickness and diameter and are susceptible to entanglement and recombination. Indirect methods demonstrate that movement proteins assemble independently at the top of the nanotube. These viral nanotubes grow distinctly from previously known natural particle-filled systems and are a unique biological tubular nanomaterial that has the potential for micro- or nanoapplications as a mechanically stable structural component.

A Descriptive in vitro Electron Microscopic Study of Acidic Fluoride-Treated Enamel: Potential Anti-Erosion Effects.

This study aimed to investigate the surface zones of acidic fluoride-treated enamel. Human teeth were each divided into three or four enamel specimens that were treated for 10 min with solutions of 0.2 and 0.4% HF (pH 3.09 and 2.94), 1.74% SnF2 (pH 2.9), 0.68% TiF4 (pH 1.6) and 0.84% NaF (pH 4.5). Untreated specimens functioned as negative controls. The microstructure and elemental composition of the surface zones were studied by scanning electron microscopy/energy-dispersive X-ray (EDX) analysis, transmission electron microscopy (TEM) and nanospot-EDX following cross-sectional preparation using focused ion beam technology. TEM/EDX analyses of NaF-treated specimens showed a 500-nm-thick closed surface film containing 20-40 at% (atomic percent) F. HF-treated specimens had a distinct surface film 200-600 nm thick (dense, not globular) containing 45-47 at% F. TiF4-treated specimens had a surface film of 200-300 nm in thickness containing 8-11 at% Ti but no detectable fluoride. SnF2-treated specimens had a modified surface enamel layer varying in thickness from 200 to 800 nm with an inhomogeneous distribution of Sn. Local spots were detected with as high as 8 at% Sn (30 wt%, weight percent). The results suggest that the reaction mechanisms of SnF2 and TiF4 solutions with dental enamel differ from those occurring after enamel exposure to acidulated NaF and HF solutions. While the HF and NaF treatments resulted in the formation of CaF2-like material as shown by EDX, no significant surface fluoridation was found for SnF2 and TiF4 solutions within the TEM/EDX detection limits. These results suggest that the erosion-protective mechanisms of these latter compounds probably relate more to the formation of hardly soluble and acid-resistant reaction surface films and less to surface fluoride incorporation.