RESUMEN
Major advances in the field of periodontal tissue engineering have favored the fabrication of biodegradable membranes with tunable physical and biological properties for guided bone regeneration (GBR). Herein, we engineered innovative nanoscale beta-tricalcium phosphate (ß-TCP)-laden gelatin methacryloyl/polycaprolactone (GelMA/PCL-TCP) photocrosslinkable composite fibrous membranes via electrospinning. Chemo-morphological findings showed that the composite microfibers had a uniform porous network and ß-TCP particles successfully integrated within the fibers. Compared with pure PCL and GelMA/PCL, GelMA/PCL-TCP membranes led to increased cell attachment, proliferation, mineralization, and osteogenic gene expression in alveolar bone-derived mesenchymal stem cells (aBMSCs). Moreover, our GelMA/PCL-TCP membrane was able to promote robust bone regeneration in rat calvarial critical-size defects, showing remarkable osteogenesis compared to PCL and GelMA/PCL groups. Altogether, the GelMA/PCL-TCP composite fibrous membrane promoted osteogenic differentiation of aBMSCs in vitro and pronounced bone formation in vivo. Our data confirmed that the electrospun GelMA/PCL-TCP composite has a strong potential as a promising membrane for guided bone regeneration.
Asunto(s)
Materiales Biocompatibles , Osteogénesis , Ratas , Animales , Materiales Biocompatibles/farmacología , Regeneración Ósea , Fosfatos de Calcio/farmacología , Poliésteres , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
Periodontitis is a ubiquitous chronic inflammatory, bacteria-triggered oral disease affecting the adult population. If left untreated, periodontitis can lead to severe tissue destruction, eventually resulting in tooth loss. Despite previous efforts in clinically managing the disease, therapeutic strategies are still lacking. Herein, melt electrowriting (MEW) is utilized to develop a compositionally and structurally tailored graded scaffold for regeneration of the periodontal ligament-to-bone interface. The composite scaffolds, consisting of fibers of polycaprolactone (PCL) and fibers of PCL-containing magnesium phosphate (MgP) were fabricated using MEW. To maximize the bond between bone (MgP) and ligament (PCL) regions, we evaluated two different fiber architectures in the interface area. These were a crosshatch pattern at a 0/90° angle and a random pattern. MgP fibrous scaffolds were able to promote in vitro bone formation even in culture media devoid of osteogenic supplements. Mechanical properties after MgP incorporation resulted in an increase of the elastic modulus and yield stress of the scaffolds, and fiber orientation in the interfacial zone affected the interfacial toughness. Composite graded MEW scaffolds enhanced bone fill when they were implanted in an in vivo periodontal fenestration defect model in rats. The presence of an interfacial zone allows coordinated regeneration of multitissues, as indicated by higher expression of bone, ligament, and cementoblastic markers compared to empty defects. Collectively, MEW-fabricated scaffolds having compositionally and structurally tailored zones exhibit a good mimicry of the periodontal complex, with excellent regenerative capacity and great potential as a defect-specific treatment strategy.
Asunto(s)
Ligamento Periodontal , Periodontitis , Ratas , Animales , Andamios del Tejido/química , Huesos , Osteogénesis , Poliésteres/química , Periodontitis/terapia , Ingeniería de Tejidos/métodos , Regeneración ÓseaRESUMEN
Periodontitis is a chronic inflammatory condition that often causes serious damage to tooth-supporting tissues. The limited successful outcomes of clinically available approaches underscore the need for therapeutics that cannot only provide structural guidance to cells but can also modulate the local immune response. Here, three-dimensional melt electrowritten (i.e., poly(ε-caprolactone)) scaffolds with tissue-specific attributes were engineered to guide differentiation of human-derived periodontal ligament stem cells (hPDLSCs) and mediate macrophage polarization. The investigated tissue-specific scaffold attributes comprised fiber morphology (aligned vs. random) and highly-ordered architectures with distinct strand spacings (small 250 µm and large 500 µm). Macrophages exhibited an elongated morphology in aligned and highly-ordered scaffolds, while maintaining their round-shape on randomly-oriented fibrous scaffolds. Expressions of periostin and IL-10 were more pronounced on the aligned and highly-ordered scaffolds. While hPDLSCs on the scaffolds with 500 µm strand spacing show higher expression of osteogenic marker (Runx2) over 21 days, cells on randomly-oriented fibrous scaffolds showed upregulation of M1 markers. In an orthotopic mandibular fenestration defect model, findings revealed that the tissue-specific scaffolds (i.e., aligned fibers for periodontal ligament and highly-ordered 500 µm strand spacing fluorinated calcium phosphate [F/CaP]-coated fibers for bone) could enhance the mimicking of regeneration of natural periodontal tissues.
RESUMEN
Fused Filament Fabrication (FFF)-based 3D printing is an efficient technique for developing medical implants, but it is not very useful in developing small yet mechanically robust design-specific fixtures such as dental implants (<15 mm). Specifically, it is challenging to 3D print robust Polyetheretherketone (PEEK) small implants due to PEEK's high melting temperature and melt viscosity. However, in this study, we efficiently utilize high-temperature FFF to develop the first-of-its-kind patient-specific robust PEEK dental implants with high print resolution. Specifically, we explore the effects of critical FFF processing conditions on the mechanical properties of the implants and subsequently determine an optimized set of processing conditions that are essential in developing durable dental implant systems. Our results indicate that the 3D printed dental implants exhibit good fatigue properties and suffice the clinical and industrial requirements for dental implants. Furthermore, we prove that the 3D printed implants exhibit adequate mechanical durability even after simulated (accelerated) aging of 30 years.
Asunto(s)
Implantes Dentales , Cetonas , Humanos , Éter , Impresión Tridimensional , Éteres de Etila , ÉteresRESUMEN
The primary goal of this study is to develop and analyze 3D printed structures based on a well-known composite known as ß-Tricalcium Phosphate (TCP)- polylactic acid (PLA). There are some interesting aspects of this study. First, we developed 3D printable TCP-PLA composite filaments in-house, with high reproducibility, by a one-step process method using a single screw extruder. Second, we explored the physicochemical properties of the developed TCP-PLA composite filaments. Third, we investigated the effect of an FDM-based nozzle temperature of 190 °C, 200 °C, 210 °C, and 220 °C on the composite's crystallinity and rheological and mechanical properties. Results confirmed the successful development of constant-diameter TCP-PLA composite filaments with a homogeneous distribution of TCP particles in the PLA matrix. We observed that a higher nozzle temperature in the FDM process increased the crystallinity of the printed PLA and TCP-PLA structures. As a result, it also helped to enhance the mechanical properties of the printed structures. The rheological studies were performed in the same temperature range used in the actual FDM process, and results showed an improvement in rheological properties at higher nozzle temperatures. The bare polymer and the composite polymer-ceramic melts exhibited lower viscosity and less rigidity at higher nozzle temperatures, which resulted in enhancing the polymer melt flowability and interlayer bonding between the printed layers. Overall, our results confirmed that 3D printable TCP-PLA filaments could be made in-house, and optimization of the nozzle temperature is essential to developing 3D printed composite parts with favorable mechanical properties.
RESUMEN
Periodontitis is a chronic inflammatory, bacteria-triggered disorder affecting nearly half of American adults. Although some level of tissue regeneration is realized, its low success in complex cases demands superior strategies to amplify regenerative capacity. Herein, highly ordered scaffolds are engineered via Melt ElectroWriting (MEW), and the effects of strand spacing, as well as the presence of a nanostructured fluorinated calcium phosphate (F/CaP) coating on the adhesion/proliferation, and osteogenic differentiation of human-derived periodontal ligament stem cells, are investigated. Upon initial cell-scaffold interaction screening aimed at defining the most suitable design, MEW poly(ε-caprolactone) scaffolds with 500 µm strand spacing are chosen. Following an alkali treatment, scaffolds are immersed in a pre-established solution to allow for coating formation. The presence of a nanostructured F/CaP coating leads to a marked upregulation of osteogenic genes and attenuated bacterial growth. In vivo findings confirm that the F/CaP-coated scaffolds are biocompatible and lead to periodontal regeneration when implanted in a rat mandibular periodontal fenestration defect model. In aggregate, it is considered that this work can contribute to the development of personalized scaffolds capable of enabling tissue-specific differentiation of progenitor cells, and thus guide simultaneous and coordinated regeneration of soft and hard periodontal tissues, while providing antimicrobial protection.
Asunto(s)
Osteogénesis , Andamios del Tejido , Animales , Periodoncio , Poliésteres , Ratas , Ingeniería de Tejidos , Cicatrización de HeridasRESUMEN
The ultimate goal of this paper is to develop novel ceramic-polymer-based biocomposite orthopedic scaffolds with the help of additive manufacturing. Specifically, we incorporate a bioceramic known as amorphous magnesium phosphate (AMP) into polylactic acid (PLA) with the help of the melt-blending technique. Magnesium phosphate (MgP) was chosen as the bioactive component as previous studies have confirmed its favorable biomaterial properties, especially in orthopedics. Special care was taken to develop constant diameter AMP-PLA composite filaments, which would serve as feedstock for a fused filament fabrication (FFF)-based three-dimensional (3D) printer. Before the filaments were used for FFF, a thorough set of characterization protocols comprising of phase analysis, microstructure evaluations, thermal analysis, rheological analysis, and in vitro degradation determinations was performed on the biocomposites. Scanning electron microscopy (SEM) results confirmed a homogenous dispersion of AMP particles in the PLA matrix. Rheological studies demonstrated good printability behavior of the AMP-PLA filaments. In vitro degradation studies indicated a faster degradation rate in the case of AMP-PLA filaments as compared to the single phase PLA filaments. Subsequently, the filaments were fed into an FFF setup, and tensile bars and design-specific macroporous AMP-PLA scaffolds were printed. The biocomposite exhibited favorable mechanical properties. Furthermore, in vitro cytocompatibility results revealed higher pre-osteoblast cell attachment and proliferation on AMP-PLA scaffolds as compared to single-phase PLA scaffolds. Altogether, this study provides a proof of concept that design-specific bioactive AMP-PLA biocomposite scaffolds fabricated by FFF can be potential candidates as medical implants in orthopedics.
Asunto(s)
Materiales Biocompatibles/química , Compuestos de Magnesio/química , Fosfatos/química , Poliésteres/química , Impresión Tridimensional , Células 3T3 , Animales , Adhesión Celular , Células Cultivadas , Ensayo de Materiales , Ratones , Tamaño de la Partícula , Porosidad , Propiedades de Superficie , Andamios del Tejido/químicaRESUMEN
This article demonstrates our efforts in developing and evaluating all-ceramic, biodegradable composites of calcium phosphate cements (CPCs) reinforced with silver (Ag)-doped magnesium phosphate (MgP) crystals. Two primary goals of this study were to 1) enhance CPC's poor mechanical properties with micro-platelet reinforcement, and 2) impart antibacterial functionalities in composites with the aim to inhibit surgical site infections (SSI). The work embodies three novel features. First, as opposed to well-known reinforcements with whisker or fiber-like morphology, we explored micro-platelets for the first time as the strengthening phase in the CPC matrix. Second, in contrast to conventional polymeric or calcium phosphate (CaP) fibrous reinforcements, newberyite (NB, MgHPO4.3H2O) micro-platelets belonging to the less explored yet promising MgP family, were evaluated as reinforcements for the first time. Third, NB micro-platelets were doped with Ag+ ions (AgNB, Ag content: 2 wt%) for enhancing antibacterial functionalities. Results indicated that 1 wt% of AgNB micro-platelet incorporation in the CPC matrix enhanced the compressive and flexural strengths by 200% and 140% respectively as compared to the un-reinforced ones. Besides, antibacterial assays revealed effective bactericidal functionalities (>99% bacteria kill) of the AgNB reinforced CPCs against Escherichia coli. Finally, cytocompatibility studies confirmed favorable pre-osteoblast cell proliferation and differentiation in vitro. Hence, this effort was successful in developing a self-setting and injectable AgNB reinforced CPC composition with favorable mechanical and antibacterial properties.
Asunto(s)
Cementos para Huesos , Plata , Antibacterianos/farmacología , Plaquetas , Fosfatos de Calcio , Magnesio , Compuestos de Magnesio , Ensayo de Materiales , FosfatosRESUMEN
This article reports, for the first time, the 'proof-of-concept' results on magnetic monetite (CaHPO4)-based calcium phosphate cements (CPCs) compositions developed for the hyperthermia treatment of bone tumors. Hyperthermia involves the heating of a tumor within a temperature range of 40-45 °C, inducing apoptosis in the tumor cells. This process holds promising potential in the field of cancer treatment and has been proven to be more effective than conventional therapeutics. Hence, we aimed to develop cement compositions that are capable of the hyperthermia treatment of bone tumors. To achieve that central goal, we incorporated iron oxide (Fe3O4), a ferromagnetic material, into monetite and hypothesized that, upon the application of a magnetic field, magnetite will generate heat and ablate the tumor cells near the implantation site. The results confirmed that an optimized content of magnetite incorporation in monetite can generate heat in the range of 40-45 °C upon the application of a magnetic field. Furthermore, the compositions were bioactive and cytocompatible with an osteoblastic cell line.
RESUMEN
One of the most damaging pathologies that affects the health of both soft and hard tissues around the tooth is periodontitis. Clinically, periodontal tissue destruction has been managed by an integrated approach involving elimination of injured tissues followed by regenerative strategies with bone substitutes and/or barrier membranes. Regrettably, a barrier membrane with predictable mechanical integrity and multifunctional therapeutic features has yet to be established. Herein, we report a fiber-reinforced hydrogel with unprecedented tunability in terms of mechanical competence and therapeutic features by integration of highly porous poly(ε-caprolactone) fibrous mesh(es) with well-controlled 3D architecture into bioactive amorphous magnesium phosphate-laden gelatin methacryloyl hydrogels. The presence of amorphous magnesium phosphate and PCL mesh in the hydrogel can control the mechanical properties and improve the osteogenic ability, opening a tremendous opportunity in guided bone regeneration (GBR). Results demonstrate that the presence of PCL meshes fabricated via melt electrowriting can delay hydrogel degradation preventing soft tissue invasion and providing the mechanical barrier to allow time for slower migrating progenitor cells to participate in bone regeneration due to their ability to differentiate into bone-forming cells. Altogether, our approach offers a platform technology for the development of the next-generation of GBR membranes with tunable mechanical and therapeutic properties to amplify bone regeneration in compromised sites. STATEMENT OF SIGNIFICANCE: In this study, we developed a fiber-reinforced hydrogel platform with unprecedented tunability in terms of mechanical competence and therapeutic features for guided bone regeneration. We successfully integrated highly porous poly(ε-caprolactone) [PCL] mesh(es) into amorphous magnesium phosphate-laden hydrogels. The stiffness of the engineered hydrogel was significantly enhanced, and this reinforcing effect could be modulated by altering the number of PCL meshes and tailoring the AMP concentration. Furthermore, the fiber-reinforced hydrogel showed favorable cellular responses, significantly higher rates of mineralization, upregulation of osteogenic-related genes and bone formation. In sum, these fiber-reinforced membranes in combination with therapeutic agent(s) embedded in the hydrogel offer a robust, highly tunable platform to amplify bone regeneration not only in periodontal defects, but also in other craniomaxillofacial sites.
Asunto(s)
Regeneración Ósea , Hidrogeles , Animales , Gelatina , Hidrogeles/farmacología , Masculino , Osteogénesis , Poliésteres , Ratas , Células MadreRESUMEN
Bioprinting, a promising field in regenerative medicine, holds great potential to create three-dimensional, defect-specific vascularized bones with tremendous opportunities to address unmet craniomaxillofacial reconstructive challenges. A cytocompatible bioink is a critical prerequisite to successfully regenerate functional bone tissue. Synthetic self-assembling peptides have a nanofibrous structure resembling the native extracellular matrix (ECM), making them an excellent bioink component. Amorphous magnesium phosphates (AMPs) have shown greater levels of resorption while maintaining high biocompatibility, osteoinductivity, and low inflammatory response, as compared to their calcium phosphate counterparts. Here, we have established a novel bioink formulation (ECM/AMP) that combines an ECM-based hydrogel containing 2% octapeptide FEFEFKFK and 98% water with AMP particles to realize high cell function with desirable bioprintability. We analyzed the osteogenic differentiation of dental pulp stem cells (DPSCs) encapsulated in the bioink, as well as in vivo bone regeneration, to define the potential of the formulated bioink as a growth factor-free bone-forming strategy. Cell-laden AMP-modified bioprinted constructs showed an improved cell morphology but similar cell viability (â¼90%) compared to their AMP-free counterpart. In functional assays, the cell-laden bioprinted constructs modified with AMP exhibited a high level of mineralization and osteogenic gene expression without the use of growth factors, thus suggesting that the presence of AMP-triggered DPSCs' osteogenic differentiation. Cell-free ECM-based bioprinted constructs were implanted in vivo. In comparison with the ECM group, bone volume per total volume for ECM/1.0AMP was approximately 1.7- and 1.4-fold higher at 4 and 8 weeks, respectively. Further, a significant increase in the bone density was observed in ECM/1.0AMP from 4 to 8 weeks. These results demonstrate that the presence of AMP in the bioink significantly increased bone formation, thus showing promise for in situ bioprinting strategies. We foresee significant potential in translating this innovative bioink toward the regeneration of patient-specific bone tissue for regenerative dentistry.
Asunto(s)
Regeneración Ósea/efectos de los fármacos , Matriz Extracelular/química , Hidrogeles/química , Tinta , Compuestos de Magnesio/química , Fosfatos/química , Cráneo/metabolismo , Animales , Bioimpresión/métodos , Diferenciación Celular/efectos de los fármacos , Masculino , Osteogénesis/efectos de los fármacos , Impresión Tridimensional , Prueba de Estudio Conceptual , Ratas Endogámicas F344 , Células Madre/metabolismo , Ingeniería de Tejidos/métodosRESUMEN
OBJECTIVE: The aim of this study was to develop bioactive and osseointegrable polyetheretherketone (PEEK)-based composite filaments melt-blended with novel amorphous magnesium phosphate (AMP) particles for 3D printing of dental and orthopedic implants. MATERIALS AND METHODS: A series of materials and biological analyses of AMP-PEEK were performed. Thermal stability, thermogravimetric and differential scanning calorimetry curves of as-synthesized AMP were measured. Complex viscosity, elastic modulus and viscous modulus were determined using a rotational rheometer. In vitro bioactivity was analyzed using SBF immersion method. SEM, EDS and XRD were used to study the apatite-forming ability of the AMP-PEEK filaments. Mouse pre-osteoblasts (MC3T3-E1) were cultured and analyzed for cell viability, proliferation and gene expression. For in vivo analyses, bare PEEK was used as the control and 15AMP-PEEK was chosen based on its in vitro cell-related results. After 4 or 12 weeks, animals were euthanized, and the femurs were collected for micro-computed tomography (µ-CT) and histology. RESULTS: The collected findings confirmed the homogeneous dispersion of AMP particles within the PEEK matrix with no phase degradation. Rheological studies demonstrated that AMP-PEEK composites are good candidates for 3D printing by exhibiting high zero-shear and low infinite-shear viscosities. In vitro results revealed enhanced bioactivity and superior pre-osteoblast cell function in the case of AMP-PEEK composites as compared to bare PEEK. In vivo analyses further corroborated the enhanced osseointegration capacity for AMP-PEEK implants. SIGNIFICANCE: Collectively, the present investigation demonstrated that AMP-PEEK composite filaments can serve as feedstock for 3D printing of orthopedic and dental implants due to enhanced bioactivity and osseointegration capacity.
Asunto(s)
Implantes Dentales , Animales , Benzofenonas , Cetonas , Compuestos de Magnesio , Ratones , Fosfatos , Polietilenglicoles , Polímeros , Impresión Tridimensional , Microtomografía por Rayos XRESUMEN
The main theme of this paper is to review microwave-assisted synthesis and processing of calcium and magnesium phosphate bioceramics. Microwave processing of advanced materials has been an active field of research for the last three decades and has been already reviewed in the literature. Microwave processing of bioceramics is being pursued for almost the same period of time. Unfortunately, to the best of our knowledge, we are not aware of any comprehensive review in the literature. Our group has been a significant contributor to the field, and we feel that it is an appropriate time for reviewing the state-of-the-art of the field. The paper is divided into several sections. After rationalizing the motivation behind writing this paper in the introduction, the second section builds on some fundamental aspects of microwave-matter interactions. The third section, representing the synthesis aspects, is subdivided into five sub-sections focusing on various calcium and magnesium phosphates in both crystalline and amorphous forms. The fourth section focuses on magnesium phosphate-based bioceramics. The fifth and the sixth section describe results on the utility of microwave assistance in developing multi-functional coatings on medical implants and orthopedic cements respectively. The subsequent section reviews results on microwave sintering of calcium and magnesium phosphates. The paper concludes with remarks on unresolved issues and future directions of research. It is expected that this comprehensive review on the interdisciplinary topic will further propel the exploration of other novel applications of microwave technology in processing biomaterials by a diverse group of scientists and engineers. STATEMENT OF SIGNIFICANCE: 1. This review highlights the broad-spectrum capabilities of microwave applications in processing orthopedic bioceramics. 2. The article covers "processing" in the broadest sense of the word, comprising of material synthesis, sintering, coating formation, and setting of orthopedic cements. It also expands beyond conventional calcium phosphates to include the emergent family of magnesium phosphates. 3. In vitro/in vivo responses of microwave-processed bioceramics are discussed thus providing an integral understanding of biological aspects of these materials. 4. The comprehensive review on this interdisciplinary topic will help researchers in various disciplines to appreciate the significance and usefulness of microwaves in biomaterials processing. Further, we also believe that it will propel the exploration of other novel applications of microwave technology in the biomaterials sector.
Asunto(s)
Compuestos de Magnesio , Microondas , Materiales Biocompatibles , Fosfatos de Calcio , FosfatosRESUMEN
This article reports for the first time our successful result in the synthesis of antibacterial single-phase newberyite (NB, MgHPO4 .3H2 O), an important magnesium phosphate (MgP) bioceramic. The prime novelty lies in the fact that we explore novel MgPs as next-generation orthopedic biomaterials as opposed to conventional calcium phosphates (CaP). While NB has already shown great promise, unlike its competitor struvite (ST, MgNH4 PO4 .6H2 O), NB is not intrinsically antibacterial. Given the havoc created by surgical site infections (SSI) in orthopedics, it would be worthwhile to explore if antibacterial NB can be synthesized cost-effectively. To accomplish that central goal, we used silver ion (Ag+ ) containing precursor solutions and exposed those to microwave irradiation. This action resulted in the rapid synthesis of NB microplatelets. Besides, three other specific objectives are addressed. First, Ag-doping was optimized to preserve the single-phase nature for sustained dopant release. Second, Ag+ release kinetics against common infection causing bacterial strains was analyzed. Finally, we inspected for any harmful effect of Ag-doped NB on MC3T3 preosteoblasts. Interestingly, the single-phase nature of NB microplatelets can be retained until 2 wt % Ag-doping and they exhibit good antibacterial and cytocompatible properties. Even though 3 wt % Ag-doped compositions (composites) were 100% antibacterial; they were cytotoxic.
Asunto(s)
Antibacterianos/química , Materiales Biocompatibles/química , Compuestos de Magnesio/química , Equipo Ortopédico , Fosfatos/química , Plata/química , Células 3T3 , Animales , Fosfatos de Calcio/química , Cerámica , Escherichia coli/efectos de los fármacos , Iones , Ensayo de Materiales , Ratones , Pruebas de Sensibilidad Microbiana , Microscopía Electrónica de Rastreo , Microondas , Ortopedia , Osteoblastos/metabolismo , Polvos , Staphylococcus aureus/efectos de los fármacos , Estruvita/química , Difracción de Rayos XRESUMEN
The electrospinning process has gained popularity due to its ease of use, simplicity and diverse applications. The properties of electrospun fibers can be controlled by modifying either process variables (e.g., applied voltage, solution flow rate, and distance between charged capillary and collector) or polymeric solution properties (e.g., concentration, molecular weight, viscosity, surface tension, solvent volatility, conductivity, and surface charge density). However, many variables affecting electrospinning are interdependent. An optimized electrospinning process is one in which these parameters remain constant and continuously produce nanofibers consistent in physicochemical properties. In addition, nozzle configurations, such as single nozzle, coaxial, multi-jet electrospinning, have an impact on the fiber characteristics. The polymeric solution could be aqueous, a polymeric melt or an emulsion, which in turn leads to different types of nanofiber formation. Nanofiber properties can also be modified by polarity inversion and by varying the collector design. The active moiety is incorporated into polymeric fibers by blending, surface modification or emulsion formation. The nanofibers can be further modified to deliver multiple drugs, and multilayer polymer coating allows sustained release of the incorporated active moiety. Electrospun nanofibers prepared from polymers are used to deliver antibiotic and anticancer agents, DNA, RNA, proteins and growth factors. This review provides a compilation of studies involving the use of electrospun fibers in biomedical applications with emphasis on nanoparticle-impregnated nanofibers.
RESUMEN
The present study is the first of its kind dealing with the development of a specific bioceramic which qualifies as a potential material in hard-tissue replacements. Specifically, we report the synthesis and evaluation of smart injectable calcium phosphate bone cement (CPC) which we believe will be suitable for various kinds of orthopedic and spinal-fusion applications. The smart nature of this next generation orthopedic implant is attained by incorporating piezoelectric barium titanate (BT) particles into monetite-based (dicalcium phosphate anhydrous, DCPA) CPC composition. The main goal is to take advantage of the piezoelectric properties of BT, as electromechanical effect plays a vital role in fracture healing at the defect site and bone integration with the implant. Furthermore, radiopacity of BT would help in easy detection of the CPC presence at the fracture site during surgery. Results reveal that BT addition favors important properties of bone cement such as good compressive strength, injectability, bioactivity, biocompatibility, and even washout resistance. Most importantly, the self-setting nature of the bone cements are not compromised with BT incorporation. The in vitro results confirm that the developed bone-cement abides by the standard orthopedic requirements making it apt for real-time prosthetic materials.
RESUMEN
Polyetheretherketone (PEEK) with great thermal and chemical stability, desirable mechanical properties and promising biocompatibility is being widely used as orthopedic and dental implant materials. However, the bioinert surface of PEEK can hinder direct osseointegration between the host tissue and PEEK based implants. The important signatures of this paper are as follows. First, we report for the formation of osseointegrable amorphous magnesium phosphate (AMP) coating on PEEK surface using microwave energy. Second, coatings consist of nano-sized AMP particles with a stacked thickness of 800nm. Third, coatings enhance bioactivity in-vitro and induce significantly high amount of bone-like apatite coating, when soaked in simulated body fluid (SBF). Fourth, the as-deposited AMP coatings present no cytotoxicity effects and are beneficial for cell adhesion at early stage. Finally, the high levels of expression of osteocalcin (OCN) in cells cultured on AMP coated PEEK samples indicate that AMP coatings can promote new bone formation and hence osseointegration.
Asunto(s)
Materiales Biocompatibles Revestidos/química , Cetonas/química , Compuestos de Magnesio/química , Microondas , Fosfatos/química , Polietilenglicoles/química , Animales , Benzofenonas , Diferenciación Celular/genética , Línea Celular , Supervivencia Celular , Humanos , Iones/sangre , Ratones , Osteoblastos/citología , Osteogénesis/genética , Polímeros , ARN Mensajero/genética , ARN Mensajero/metabolismo , Hidróxido de Sodio/química , Espectrometría por Rayos X , Espectroscopía Infrarroja por Transformada de Fourier , Ácidos Sulfúricos/química , Propiedades de Superficie , Agua/química , Difracción de Rayos XRESUMEN
Porous biomaterials have been widely used in a variety of orthopedic applications. Porous scaffolds stimulate the cellular responses and accelerate osteogenesis. The porous structure of scaffolds, as well as their compositions, dictate cellular responses such as their adhesion, penetration, differentiation, nutrition diffusion, and bone in-growth. During the last two decades, tremendous efforts have been devoted by researchers on innovative processing technologies of porous ceramics, metals, polymers, and glasses, resulting in a wide variety of porous architectures with substantial improvements in properties. Design and fabrication of porous scaffolds are complex issues that can jeopardize scaffolds' biological, mechanical, and physiochemical properties. This paper intends to comprehensively review the processing techniques used in fabricating porous biomaterials including ceramics, polymers, metals, and glasses along with correlating with their biological and mechanical performances. From a macroscopic perspective, pore size distribution, interconnectivity, pore morphology, and porosity play critical roles in bone formation in vivo. From a microscopic viewpoint, the adhesion-retention of proteins, which eventually affect some cellular fates, and absorption-delivery of therapeutic agents can be tailored by microtextured surfaces. Various processing techniques such as partial sintering, sacrificial fugitives, foaming, freeze casting, metal injection molding, rapid prototyping, etc., and their associated parameters in designing of porous biomaterials are reviewed, with specific examples of their applications. The remainder of the paper is organized as follows. First, the paper describes correlations of porosity characteristics with biological properties. Subsequently, mechanical properties of porous scaffolds are discussed. Finally, a summary of this review and future directions are presented.
RESUMEN
This Article reports the fabrication and evaluation of single-phase, silver-doped trimagnesium phosphate hydrate (Ag-TMPH) nanosheet coatings on polyetheretherketone (PEEK), a well-known material used to fabricate orthopedic and spinal implants. While PEEK has better biomechanical compatibility with bone compared to metallic implants, it is also quite inert. Therefore, it is a common practice to coat PEEK implants with conventional calcium phosphates (CaPs) to enhance cell attachment, proliferation and differentiation. As opposed to well-studied CaP compounds, relatively less-explored magnesium phosphates (MgPs) are also becoming interesting orthopedic biomaterials and is the prime focus in this research. The novel aspects of this paper are as follows. First, we report developing TMPH coatings within minutes with the help of microwave irradiation technology. Microwave irradiation plays an important role in the coating formation with accelerated kinetics. Scanning electron microscopy (SEM) confirmed the fabrication of approximately 650 nm thick TMPH coatings. The coatings resulted in submicron level surface roughness and in vitro cell studies confirmed enhanced MC3T3 cell adhesion within 4 h on such surfaces. The coatings also resulted in significant apatite formation after immersing in simulated body fluid for 7 days. Second, multifunctionality was achieved by doping TMPH coatings with Ag, thus rendering the coatings antibacterial. The antibacterial properties were evaluated against two most common infection-causing bacterial strains-Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. The results indicated good bacterial resistance and bactericidal properties of the Ag-TMPH coatings. Third, in spite of Ag doping, the single-phase nature of the coatings were retained (without forming composite systems) with the help of the low-processing temperature of the microwave irradiation. The inductive coupled plasma technique confirmed that the doped single-phase TMPH coatings supported a uniform and controlled release of Ag+ ions over a period of 3 weeks. MTT assay evaluations and SEM micrographs confirmed no signs of cytotoxicity and healthy proliferation of cells in all cases. Quantitative real time PCR (qRT-PCR) indicated a significant rise in collagen (Col1) and osteocalcin (OCN) gene expression levels in the case of TMPH coated PEEK. Thus, microwave irradiation was successfully employed in forming multifunctional, that is, bioactive, cytocompatible, and antibacterial MgP coatings on PEEK.
RESUMEN
Magnesium ions are directly involved in numerous biological mechanisms; for example, they play an important part in the regulation of ion channels, DNA stabilization, enzyme activation and stimulation of cell growth and proliferation. This alkaline earth metal has gained great popularity in orthopedic applications in recent years. Magnesium-based bioceramics include a large group of magnesium containing compounds such as oxides, phosphates and silicates, that are involved in orthopedic applications like bone cements, bone scaffolds or implant coatings. This article aims to give a comprehensive review on different magnesium-based bioceramics, e.g. magnesium phosphates (MgO-P2O5), calcium magnesium phosphates (CaO-MgO-P2O5), and magnesium glasses (SiO2-MgO) with a strong focus on the chemistry and properties of magnesium phosphate containing cements as the main application form. In addition, the processing of magnesium phosphate minerals into macroporous scaffolds for tissue engineering applications by either using traditional porogens or by additive manufacturing approaches are reflected. Finally, the biological in vitro and in vivo properties of magnesium phosphates for bone regeneration are summarized, which show promising results regarding the application as bone replacement material, but still lack in terms of testing in large animal models, load-bearing application sites and clinical data. STATEMENT OF SIGNIFICANCE: Though bone substitutes from calcium phosphates have been investigated for a long time, a new trend is visible in the biomaterials sector: magnesium based bioceramics from magnesium phosphates and silicates due to the special biological significance of magnesium ions in enzymatic activation, cell growth and proliferation, etc. In contrast to pure magnesium implants, such formulations do not release hydrogen during degradation. As with calcium based bioceramics, magnesium based bioceramics are used for the development of diverse applications such as cements, macroporous scaffolds and coatings. From this perspective, we present a systematic overview on diverse kinds of magnesium based bioceramics, their processing regimes for different clinical purposes and their behavior both in vitro and in vivo.