RESUMEN
Covalent organic frameworks (COFs) containing well-defined redox-active groups have become competitive materials for next-generation batteries. Although high potentials and rate performance can be expected, only a few examples of p-type COFs have been reported for charge storage to date with even fewer examples on the use of COFs in multivalent ion batteries. Herein, we report the synthesis of a p-type highly porous and crystalline azatruxene-based COF and its application as a positive electrode material in Li- and Mg-based batteries. When this material is used in Li-based half cells as a COF/carbon nanotube (CNT) electrode, a discharge potential of 3.9 V is obtained with discharge capacities of up to 70 mAh g-1 at a 2 C rate. In Mg batteries using a tetrakis(hexafluoroisopropyloxy)borate electrolyte, cycling proceeds with an average discharge voltage of 2.9 V. Even at a fast current rate of 5 C, the capacity retention amounts to 84% over 1000 cycles.
RESUMEN
Organic battery electrode materials offer the unique opportunity for full cells to operate in an anion-rocking chair mode. For this configuration a pair of p-type redox-active electrode materials is required with a substantial potential gap between their redox processes. We herein investigate viologen-functionalized polystyrenes as negative electrode paired with a phenothiazine polymer as positive electrode in all-organic full cells. The 10 % crosslinked viologen polymer X10 -PVBV gave better performance than the linear PVBV and was employed in a full cell as negative electrode with cross-linked poly(3-vinyl-N-methylphenothiazine) (X-PVMPT) as positive electrode. Three cell configurations regarding the voltage range were investigated, of which one with an operating potential of 0.9â V gave the highest performance. The full cell delivered a specific discharge capacity of 64â mA h g-1 (of X-PVMPT) in the first cycle and a capacity retention of 79 % after 100 cycles. This is one of only few reported anion rocking chair all-organic cells and the first employing a phenothiazine-based positive electrode material.
RESUMEN
Locally aromatic alkyl-N-substituted squarephaneic tetraimide (SqTI) conjugated macrocycles are four-electron reducible, owing to global aromaticity and presumed global Baird aromaticity of the dianion and tetraanion states, respectively. However, their good solubility inhibits their application as a battery electrode material. By applying sidechain removal as a strategy to reduce SqTI solubility, we report the development of its unsubstituted derivative SqTI-H, which was obtained directly from squarephaneic tetraanhydride by facile treatment with hexamethyldisilazane and MeOH. Compared to alkyl-N-substituted SqTI-Rs, SqTI-H exhibited further improved thermal stability and low neutral state solubility in most common organic solvents, owing to computationally demonstrated hydrogen-bonding capabilities emanating from each imide position on SqTI-H. Reversible solid state electrochemical reduction of SqTI-H to the globally aromatic dianion state was also observed at -1.25 V vs. Fc/Fc+, which could be further reduced in two stages. Preliminary testing of SqTI-H in composite electrodes for lithium-organic half cells uncovered imperfect cycling performance, which may be explained by persistent solubility of reduced states, necessitating further optimisation of electrode fabrication procedures to attain maximum performance.
RESUMEN
With their bent π-systems, cyclic conjugation and inherent cavities, conjugated nanohoops are attractive for organic electronics applications. For ease of processing and morphological stability, an incorporation into polymers is desirable, but to date was hampered with few exceptions by synthetic difficulties. We herein present a unique strategy for the synthesis of conjugated nanohoop polymers using a dibenzo[a,e]pentalene (DBP) as central connector. We demonstrate this versatility by synthesizing three electronically diverse copolymers with dithienyldiketo(pyrrolopyrrol), fluorene and carbazole comonomers, and report the first donor-acceptor nanohoop polymer. Optoelectronic investigations reveal the prevalence of cyclic or linear conjugation, depending on the comonomer unit, and ambipolar electrochemical properties through the antiaromatic character of the DBP units. As the first report on using conjugated nanohoops for charge storage as positive electrode materials, we show a significant improvement in battery performance in a nanohoop-containing polymer compared to an equivalent nanohoop-free reference polymer. We believe this study will pave the way for the synthesis of a diverse range of nanohoop polymers and further stimulate their exploration for charge storage in batteries.
RESUMEN
Despite their inherent instability, 4n π systems have recently received significant attention due to their unique optical and electronic properties. In dibenzopentalene (DBP), benzanellation stabilizes the highly antiaromatic pentalene core, without compromising its amphoteric redox behavior or small HOMO-LUMO energy gap. However, incorporating such molecules in organic devices as discrete small molecules or amorphous polymers can limit the performance (e.g., due to solubility in the battery electrolyte solution or low internal surface area). Covalent organic frameworks (COFs), on the contrary, are highly ordered, porous, and crystalline materials that can provide a platform to align molecules with specific properties in a well-defined, ordered environment. We synthesized the first antiaromatic framework materials and obtained a series of three highly crystalline and porous COFs based on DBP. Potential applications of such antiaromatic bulk materials were explored: COF films show a conductivity of 4 × 10-8 S cm-1 upon doping and exhibit photoconductivity upon irradiation with visible light. Application as positive electrode materials in Li-organic batteries demonstrates a significant enhancement of performance when the antiaromaticity of the DBP unit in the COF is exploited in its redox activity with a discharge capacity of 26 mA h g-1 at a potential of 3.9 V vs. Li/Li+. This work showcases antiaromaticity as a new design principle for functional framework materials.
RESUMEN
With the increased application of batteries in powering electric vehicles as well as potential contributions to utility-scale storage, there remains a need to identify and develop efficient and sustainable active materials for use in lithium (Li)- and sodium (Na)-ion batteries. Organic cathode materials provide a desirable alternative to inorganic counterparts, which often come with harmful environmental impact and supply chain uncertainties. Organic materials afford a sustainable route to active electrodes that also enable fine-tuning of electrochemical potentials through structural design. Here, we report a bis-anthraquinone-functionalized s-indacene-1,3,5,7(2H,6H)-tetraone (BAQIT) synthesized using a facile and inexpensive route as a high-capacity cathode material for use in Li- and Na-ion batteries. BAQIT provides multiple binding sites for Li- and Na-ions, while maintaining low solubility in commercial organic electrolytes. Electrochemical Li-ion cells demonstrate excellent stability with discharge capacities above 190 mAh g-1 after 300 cycles at a 0.1C rate. The material also displayed excellent high-rate performance with a reversible capacity of 142 mAh g-1 achieved at a 10C rate. This material affords high power capabilities superior to current state-of-the-art organic cathode materials, with values reaching 5.09 kW kg-1. The Na-ion performance was also evaluated, exhibiting reversible capacities of 130 mAh g-1 after 90 cycles at a 0.1C rate. This work offers a structural design to encourage versatile, high-power, and long cycle-life electrochemical energy-storage materials.
RESUMEN
Organic-based electrodes for Li- and Na-ion batteries present attractive alternatives to commonly applied inorganic counterparts which can often carry with them supply-chain risks, safety concerns with thermal runaway, and adverse environmental impact. The ability to chemically direct the structure of organic electrodes through control over functional groups is of particular importance, as this provides a route to fine-tune electrochemical performance parameters. Here, we report two benzo-dipteridine derivatives, BF-Me2 and BF-H2 , as high-capacity electrodes for use in Li- and Na-ion batteries. These moieties permit binding of multiple Li-ions per molecule while simultaneously ensuring low solubility in the supporting electrolyte, often a precluding issue with organic electrodes. Both display excellent electrochemical stability, with discharge capacities of 142 and 182 mAh g-1 after 100 cycles at a C/10 rate and Coulombic efficiencies of 96% and â¼ 100% demonstrated for BF-Me2 and BF-H2 , respectively. The application of a Na-ion cell has also been demonstrated, showing discharge capacities of 88.8 and 137 mAh g-1 after 100 cycles at a C/2 rate for BF-Me2 and BF-H2 , respectively. This work provides an encouraging precedent for these and related structures to provide versatile, high-energy density, and long cycle-life electrochemical energy storage materials.
RESUMEN
Conjugated porous polymers were used as precursors to prepare nitrogen and sulphur doped carbon atoms, which were then used for oxygen reduction and energy storage.