The Growth Performance and Nutrient Composition of Black Soldier Fly (Hermetia illucens) Larvae Fed Slaughtered Bovine Blood.

The disposal of slaughterhouse blood poses significant environmental challenges due to its biological instability and high nutrient content. We used a gradient of 10% blood increments (0-100%) to feed BSFL, and the correlation between the proportion of bovine blood and the BSFL weight gain, mortality rate, fatty acid content, and amino acid content was researched. Results indicate a positive correlation between the bovine blood content and BSFL mortality, with survival rates above 95% for blood proportions below 60%. Larval weight exhibited a negative correlation as the bovine blood content increased. Nutritional analysis revealed that the crude protein content in BSFL increased proportionally with bovine blood (14.75-25.45 g/100 g), while the crude fat content decreased correspondingly (10.70-4.66 g/100 g). The sugar content remained relatively constant across groups. Fatty acid analysis showed increased levels of C16:0, C14:0, and C16:1 and decreased levels of C18:1, C18:2, and C18:3 with higher bovine blood contents. The amino acid content generally increased with higher blood proportions. This study highlights the bioconversion potential of BSFL for bovine blood and underscores the impact of protein, lipid, and sugar concentrations in feed on BSFL growth. These findings provide valuable insights for utilizing slaughterhouse waste in BSFL rearing, contributing to the development of more sustainable waste management and animal feed production methods.

Validation of Renal Function using Multiphasic Ratios between Renal Cortex and Medulla in Kidney Recipients.

OBJECTIVE: To verify the multiphase ratio of Computer Tomography-value between the renal cortex and renal medulla, which can be used to concisely evaluate renal function in kidney recipients. METHODS: Fifty-eight kidney recipients were retrospectively enrolled and divided into the Normal group(eGFR≥90 mL/min/1.73m2) and Abnormal group(eGFR<90 mL/min/1.73m2) according to Chronicle Kidney Disease Epidemiology Collaboration (eGFR(CKD-EPI)) and the Modular of Diet in Renal Disease (eGFR(MDRD)) formulas respectively. The multiphasic ratios between the renal cortex and medulla in the arterial phase and venous phase were noted as A(RatioC/M) and V(RatioC/M), and the difference between those two was recorded as D(RatioC/M). Correlation/regression analysis, student t-test, and ROC curves analysis were used to test the ability of multiphasic ratios to assess renal function. RESULTS: Both A(RatioC/M) and V(RatioC/M) were moderately correlated with eGFR(CKD-EPI) (Y =20.41*X + 28.20, r=0.40 (95%Cl, 0.13-0.58), P<0.01; Y =-16.57*X + 109.8, r=-0.29 (95%Cl, -0.51--0.04), P=0.03) and eGFR(MDRD) (Y =23.72*X + 23.52, r=0.38 (95%Cl, 0.13-0.58), P<0.01; Y =-19.88*X + 119.5, r=-0.30 (95%Cl, -0.52--0.05), P=0.02). However, D(RatioC/M) was strongly positive correlated with eGFR(CKD-EPI) (Y = 30.95*X + 60.71, r=0.61 (95%Cl,0.42-0.75), P<0.001) and eGFR(MDRD) (Y = 36.47*X + 61.01, r=0.62 (95%Cl, 0.44-0.76), P<0.001), respectively, and both regression lines were not significant different (slope: P=0.496, intercept: P=0.378). The differences in D(RatioC/M) between the two groups were significant (all P<0.05). The ROC curve analysis provided the cutoff values of D(RatioC/M) for assessing eGFR (AUC:0.863 and AUC:0.822, all P<0.001). CONCLUSION: The D(RatioC/M) can be used to assess renal function for kidney recipients.

Internal urethral sphincter reconstruction with anterior bladder neck tube for robotic and laparoscopic radical prostatectomy: improving early return of continence.

Background: In recent years, despite several surgical techniques having been applied, the early incontinence rate after radical prostatectomy (RP) remains high. In this study, we reconstructed an internal urethral sphincter (IUS) with anterior bladder neck tube (ABNT) to improve early return of continence and find a more effective technique for early urinary incontinence after RP. Methods: In this study, 96 previous patients who did not receive an ABNT between October 2018 and May 2020 were compared as historical controls (the control group). A total of 210 consecutive patients underwent robotic or laparoscopic RP with ABNT between May 2020 and February 2023 (the ABNT group). The inclusion criteria included Eastern Cooperative Oncology Group (ECOG) score 0-1 and localized prostate cancer (clinical stages cT1-3, cN0, cM0). The exclusion criteria included patients with diabetes, neurologic diseases, previous pelvic operations, symptoms of urinary incontinence, prior radiation, focal therapy, or androgen deprivation therapy for prostate cancer. ABNT was reconducted with a U-shaped flap from the anterior wall of the bladder neck, and was then anastomosed with the urethra. In the control group, the bladder outlet was directly anastomosed with the urethra. Continence, as defined if 0 pads were used per day and International Consultation on Incontinence Questionnaire-Short Form (ICIQ-SF) score ≤6, was assessed at 1, 4, 8, 12, and 24 weeks after catheter removal. At 2 weeks after catheter removal, urethral pressure profilometry (UPP) and upright urethrography were performed to evaluate the function of ABNT in the ABNT group. Results: More patients in the ABNT group were continent than those in the control group at 1 week (85.2% vs. 22.9%, P<0.001), 4 weeks (91.4% vs. 27.1%, P<0.001), 8 weeks (95.2% vs. 40.6%, P<0.001), 12 weeks (100% vs. 71.9%, P<0.001), and at 24 weeks (100% vs. 87.5%, P<0.001) after catheter removal. Stricture was presented in 5.2% and 2.1% (P=0.34) in the ABNT group and control group, respectively. UPP showed that a functional IUS was reconstructed with ABNT. Upright urethrography showed that the ABNT was filled with contrast medium in the urination period and with no contrast medium during the storage period and interruption of urination. Conclusions: The ABNT technique significantly improved early return of continence in comparison with the no ABNT technique, especially the immediate continence. The ABNT technique reconstructed the functional IUS with acceptable urethral stricture. The limitations of the present study include that the comparison was conducted retrospectively with a historical cohort and lack of randomization, and the single center setting. A prospective, randomized, and multicenter evaluation is expected.

Evaluation of left ventricular blood flow kinetic energy in patients with acute myocardial infarction by 4D Flow MRI: a preliminary study.

PURPOSE: To evaluate the intracavity left ventricular (LV) blood flow kinetic energy (KE) parameters using four-dimensional (4D) flow cardiovascular magnetic resonance (CMR) in patients with acute myocardial infarction (AMI). METHODS: Thirty AMI patients and twenty controls were examined via CMR, which included cine imaging, late gadolinium enhancement (LGE) and global heart 4D flow imaging. The KE parameters were indexed to LV end-diastolic volume (EDV) to obtain average, systolic and diastolic KE as well as the proportion of LV in-plane KE (%). These parameters were compared between the AMI patients and controls and between the two subgroups. RESULTS: Analysis of the LV blood flow KE parameters at different levels of the LV cavity and in different segments of the same level showed that the basal level had the highest blood flow KE while the apical level had the lowest in the control group. There were no significant differences in diastolic KE, systolic in-plane KE and diastolic in-plane KE between the anterior wall and posterior wall (p > 0.05), only the systolic KE had a significant difference between them (p < 0.05). Compared with those in the control group, the average (10.7 ± 3.3 µJ/mL vs. 14.7 ± 3.6 µJ/mL, p < 0.001), systolic (14.6 ± 5.1 µJ/mL vs. 18.9 ± 3.9 µJ/mL, p = 0.003) and diastolic KE (7.9 ± 2.5 µJ/mL vs. 10.6 ± 3.8 µJ/mL, p = 0.018) were significantly lower in the AMI group. The average KE in the infarct segment was lower than that in the noninfarct segment in the AMI group (49.5 ± 18.7 µJ/mL vs. 126.3 ± 50.7 µJ/mL, p < 0.001), while the proportion of systolic in-plane KE increased significantly (61.8%±11.5 vs. 42.9%±14.4, p = 0.001). CONCLUSION: The 4D Flow MRI technique can be used to quantitatively evaluate LV regional hemodynamic parameters. There were differences in the KE parameters of LV blood flow at different levels and in different segments of the same level in healthy people. In AMI patients, the average KE of the infarct segment decreased, while the proportion of systolic in-plane KE significantly increased.

Three-dimensional arterial spin labeling for the evaluation of the cerebral hemodynamics in ischemic and hemorrhagic Moyamoya disease.

INTRODUCTION: Moyamoya disease (MMD) is a vascular disease with significant risk of mortality due to ischemia or hemorrhage in the brain. The goal of the study was to explore three-dimensional arterial spin labeling (3D-ASL) to improve evaluation of cerebral hemodynamics in patients with MMD. METHODS: Our study included 54 cases of ischemic MMD and 42 cases of hemorrhagic MMD. Dynamic susceptibility contrast-enhanced perfusion weighted imaging (DSC-PWI) and 3D-ASL were performed at 3.0 T. Based on these scans, cerebral blood flow (CBF), mean transit time (MTT) and time to peak (TTP) were calculated and compared between patients with different disease subtypes. Receiver operating characteristics (ROC) analysis was used to assess the diagnostic sensitivity and specificity of different imaging procedures and parameters. RESULTS: Our data suggested that CBF in the lesion area was more severely reduced in patients with hemorrhagic MMD than in those with ischemic MMD. The CBF parameter in 3D-ASL diagnosed hemorrhagic and ischemic MMD with a significant sensitivity and specificity of 80.59% and 57.41% respectively, with an area under the curve (AUC) of 0.75. We also found that the relative CBF (rCBF) of 3D-ASL was more pronounced decreased and the relative MTT and TTP of DSC-PWI were significantly increased in patients with hemorrhagic MMD than those with ischemic MMD. Specificity and sensitivity, and AUC of 3D-ASL were better than the comparison of absolute values from DSC-PWI scans. DISCUSSION/CONCLUSION: Our study indicated that 3D-ASL is powerful in differentiating patients with cerebral ischemic or hemorrhagic MMD, providing another diagnostic tool that could potentially improve precision medicine to monitoring MMD patients.

High-efficiency all fluorescence white OLEDs with high color rendering index by manipulating excitons in co-host recombination layers.

All fluorescence white organic light-emitting diodes (WOLEDs) based on thermally activated delayed fluorescence (TADF) emitters are an attractive route to realize highly efficient and high color quality white light sources. However, harvesting triplet excitons in these devices remains a formidable challenge, particularly for WOLEDs involving conventional fluorescent emitters. Herein, we report a universal design strategy based on a co-host system and a cascaded exciton transfer configuration. The co-host system furnishes a broad and charge-balanced exciton generation zone, which simultaneously endows the devices with low efficiency roll-off and good color stability. A yellow TADF layer is put forward as an intermediate sensitizer layer between the blue TADF light-emitting layer (EML) and the red fluorescence EML, which not only constructs an efficient cascaded Förster energy transfer route but also blocks the triplet exciton loss channel through Dexter energy transfer. With the proposed design strategy, three-color all fluorescence WOLEDs reach a maximum external quantum efficiency (EQE) of 22.4% with a remarkable color rendering index (CRI) of 92 and CIE coordinates of (0.37, 0.40). Detailed optical simulation confirms the high exciton utilization efficiency. Finally, by introducing an efficient blue emitter 5Cz-TRZ, a maximum EQE of 30.1% is achieved with CIE coordinates of (0.42, 0.42) and a CRI of 84 at 1000 cd m-2. These outstanding results demonstrate the great potential of all fluorescence WOLEDs in solid-state lighting and display panels.

Microwave ablation of multifocal primary liver cancer guided by real-time 3.0T MRI.

OBJECTIVE: To investigate the feasibility and efficacy of real-time 3.0 T magnetic resonance imaging (MRI) guided percutaneous microwave ablation (MWA) in the treatment of multifocal liver cancer. METHODS: A total of 76 lesions in 26 patients with multifocal liver cancer who underwent 3.0 T MRI-guided microwave ablation in our hospital from April 2020 to April 2022 were retrospectively analyzed. The technical success rate, average operation time, average ablation time, and complications were evaluated. The upper abdomen was reviewed by pre- and post-contrast enhanced MRI scan every 1 months after the operation. The short-term curative effect was evaluated according to the modified Response Evaluation Criteria in Solid Tumors (mRECIST) criteria (2020 version), and the local control rate was calculated. RESULTS: All 76 lesions were successfully operated. The technical success rate was 100%, the average operation time was 103.58 ± 18.57 min, the average ablation time of a single lesion was 11.00 ± 4.05 min, and the average ablation power was 43.03 ± 4.45 W. There were no serious complications such as massive bleeding, liver failure, and infection after the operation, except in one case with a small amount of pleural effusion and one case with right upper abdominal pain. The average follow-up time was 13.88 ± 6.62 months. One patient died due to liver failure, and one lesion developed a local recurrence. The local control rate was 98.7%. CONCLUSIONS: MWA of multifocal liver cancer guided by real-time 3.0 T MRI is a safe and feasible technique and has excellent short-term efficacy.

dMIL-Transformer: Multiple Instance Learning Via Integrating Morphological and Spatial Information for Lymph Node Metastasis Classification.

Automated classification of lymph node metastasis (LNM) plays an important role in the diagnosis and prognosis. However, it is very challenging to achieve satisfactory performance in LNM classification, because both the morphology and spatial distribution of tumor regions should be taken into account. To address this problem, this article proposes a two-stage dMIL-Transformer framework, which integrates both the morphological and spatial information of the tumor regions based on the theory of multiple instance learning (MIL). In the first stage, a double Max-Min MIL (dMIL) strategy is devised to select the suspected top-K positive instances from each input histopathology image, which contains tens of thousands of patches (primarily negative). The dMIL strategy enables a better decision boundary for selecting the critical instances compared with other methods. In the second stage, a Transformer-based MIL aggregator is designed to integrate all the morphological and spatial information of the selected instances from the first stage. The self-attention mechanism is further employed to characterize the correlation between different instances and learn the bag-level representation for predicting the LNM category. The proposed dMIL-Transformer can effectively deal with the thorny classification in LNM with great visualization and interpretability. We conduct various experiments over three LNM datasets, and achieve 1.79%-7.50% performance improvement compared with other state-of-the-art methods.

The value of CMR Left ventricular strain analysis in evaluating ICM.

The purpose of this article is to investigate the value of cardiac magnetic resonance imaging (CMR) derived left ventricular strain parameters in evaluation of ischemic cardiomyopathy (ICM). Thirty-one ICM patients and nineteen non-cardiomyopathy (non-CM) patients who performed CMR examinations during the same period were selected for this retrospective study. The basic clinical data, CMR left ventricular function parameters, left ventricular strain parameters were compared among the left ventricular ejection fraction (LVEF) preserved ICM group, the LVEF impaired ICM group and the non-CM group. The differences of MyoGCS (-21.9 ± 1.9 vs. -18.9 ± 2.7 P<0.001), MyoGLS (-20.8 ± 2.3 vs. -17.0 ± 2.9 P<0.001) and EndoGLS (-22.2 ± 3.1 vs. -17.6 ± 3.7 P<0.001) between LVEF preserved ICM group and non-CM group were statistically significant, while the differences of left heart function parameters between the two groups were not statistically significant (P > 0.05). The left ventricular strain analysis can be used to assess cardiac functional and morphological alterations in ICM patients prior to changes of left ventricular function parameters, which has high clinical significance.

Facile Synthesis of NixCo3-xS4 Microspheres for High-Performance Supercapacitors and Alkaline Aqueous Rechargeable NiCo-Zn Batteries.

Electrochemical energy storage devices (EESDs) have caused widespread concern, ascribed to the increasing depletion of traditional fossil energy and environmental pollution. In recent years, nickel cobalt bimetallic sulfides have been regarded as the most attractive electrode materials for super-performance EESDs due to their relatively low cost and multiple electrochemical reaction sites. In this work, NiCo-bimetallic sulfide NixCo3-xS4 particles were synthesized in a mixed solvent system with different proportion of Ni and Co salts added. In order to improve the electrochemical performance of optimized Ni2.5Co0.5S4 electrode, the Ni2.5Co0.5S4 particles were annealed at 350 °C for 60 min (denoted as Ni2.5Co0.5S4-350), and the capacity and rate performance of Ni2.5Co0.5S4-350 was greatly improved. An aqueous NiCo-Zn battery was assembled by utilizing Ni2.5Co0.5S4-350 pressed onto Ni form as cathode and commercial Zn sheet as anode. The NiCo-Zn battery based on Ni2.5Co0.5S4-350 cathode electrode delivers a high specific capacity of 232 mAh g-1 at 1 A g-1 and satisfactory cycling performance (65% capacity retention after 1000 repeated cycles at 8 A g-1). The as-assembled NiCo-Zn battery deliver a high specific energy of 394.6 Wh kg-1 and long-term cycling ability. The results suggest that Ni2.5Co0.5S4-350 electrode has possible applications in the field of alkaline aqueous rechargeable electrochemical energy storage devices for supercapacitor and NiCo-Zn battery.

High-Intensity Focused Ultrasound Enhanced Anti-Tumor Activities of Paclitaxel in Breast Cancer in vitro and in vivo.

Background: Paclitaxel (PTX) is an important oncologic chemotherapeutic agent against breast cancer, but breast cancer patients develop significant resistance to PTX during chemotherapy. Alterations in tubulin and associated proteins have been implicated in resistance to PTX. High-intensity focused ultrasound (HIFU) induces deep tumor penetration of anti-tumor agents in solid tumors. Methods: We investigated the influence of HIFU on the anti-tumor activities of PTX in breast cancer. Both in vivo and in vitro experiments were performed in this research: mice were treated with 2 mg/Kg PTX through tail vein injection, while breast cancer cells were treated with 400 nM PTX. Cell viability was analyzed through Cell Counting Kit-8. Cell apoptosis was evaluated through Annexin-V/PI Apoptosis Analysis Kit. The activities of catalase (CAT) and superoxide dismutase (SOD) and the concentration of malondialdehyde (MDA) were evaluated by relative commercial kits. Results: HIFU enhanced PTX-inhibited breast cancer cell viability and PTX-induced cell apoptosis. Simultaneous treatment of HIFU and PTX decreased the activities of CAT and SOD and increased the concentration of MDA. In mice bearing MDA-MB-231 tumors, the treatment of HIFU and PTX significantly decreased tumor size, increased body weight and elevated animal survival. HIFU enhanced the distribution of PTX in tumor tissues. Conclusion: The performance of HIFU promoted the distribution of PTX and enhanced its anti-tumor activities in breast cancer.

[Bladder wall neourethra technique improves early urinary continence after laparoscopic radical prostatectomy].

OBJECTIVE: To study the effect of the bladder wall neourethra (BWN) technique on early urinary continence after laparoscopic radical prostatectomy (LRP). METHODS: We prospectively selected 40 cases of LRP performed in our hospital from August 2020 to August 2021 and randomly divided them into a BWN group (n = 20) and a control group (n = 20). We recorded the urinary continence rate of the two groups of patients at 7, 30, 90 and 180 days, and measured the maximum urethral pressure (MUP), functional urethral length (FUL) and functional urethral area (UFA) and observed the shape of the neourethra closure by MRI at 1 month after catheter removal. RESULTS: The urinary continence rates were significantly higher in the BWN than in the control group at 7 days (90.0% vs 25.0%, P < 0.001), 30 days (95.0% vs 35.0%, P < 0.001), 90 days (100% vs 60.0%, P < 0.05) and 180 days (100% vs 90.0%, P > 0.05) after catheter removal. No statistically significant difference was observed in MUP between the two groups (P > 0.05). FUL and FUA were remarkably higher in the BWN than in the control group (P < 0.01). MRI showed tight closure of the neourethra in the BWN group in the urine storage period. CONCLUSION: The BWN technique can significantly prolong FUL and improve early urinary continence after LRP.

Fabrication of a Chalcogenide Glass Microlens Array for Infrared Laser Beam Homogenization.

Infrared (IR) microlens arrays (MLA) have attracted increasing interest for use in infrared micro-optical devices and systems. However, the beam homogenization of IR laser light is relatively difficult to achieve because most materials absorb strongly in the IR wavelength band. In this paper, we present a new method for the application of double-sided quasi-periodic chalcogenide glass (ChG) MLAs to infrared laser homogenization systems. These are non-regular arrays of closely spaced MLAs. The double-sided MLAs were successfully prepared on the ChG surface using a single-pulse femtosecond laser-assisted chemical etching technique and a precision glass molding technique. More than two million close-packed microlenses on the ChG surface were successfully fabricated within 200 min. By taking advantage of ChG's good optical performance and transmittance (60%) in the infrared wavelength band (1~11 µm), the homogenization of the IR beam was successfully achieved using the ChG quasi-periodic MLA.

Application of Three-dimensional Visualization Fused with Ultrasound for Percutaneous Renal Puncture.

We present here the three-dimensional (3D) visualization fused with ultrasound and to evaluate its clinical application effect preliminarily. One hundred and eighteen patients with renal calculi in our hospital from September 2017 to December 2019 were prospectively randomized into two groups. The experimental group was treated with percutaneous renal puncture guided by the 3D visualization fused with ultrasound. The control group was treated with percutaneous renal puncture guided by B-ultrasonography (B-US). The puncture time in the experimental versus control group was 4.36 ± 1.28 min versus 10.72 ± 2.94 min (P = 0.000), operation time was 65.85 ± 10.63 min versus 81.34 ± 12.52 min (P = 0.000), and the loss of hemoglobin was 8.55 ± 3.76 g/L min versus 13.33 ± 5.81 g/L(P = 0.000), and the success rate of establishing the channel at one time was 98.41% versus 81.82% (P = 0.002), and the coincidence rate between the channel and the longitudinal axis of the target renal calyx was 88.89% versus 60.00% (P = 0.000). The 3D visualization fused with ultrasound could guide precise puncture to target calyces, reduce operation time, bleeding, and difficulty of puncture.

Rapid Fabrication of Large-Area Concave Microlens Array on ZnSe.

A rapid and single-step method for the fabrication of a zinc selenide (ZnSe) concave microlens array through the high-speed line-scanning of a femtosecond laser pulse is presented. Approximately 1.1 million microlenses, with minimized volume and high transparency at wavelengths between approximately 0.76-20 µm were fabricated within 36 min. More importantly, the size of the microlenses can be controlled by adjusting the laser power. Their high-quality infrared optical performance was also demonstrated. This method holds great promise for the development of ZnSe-based micro-optical devices.

Immobilization of Ni (â ¡) at three levels of contaminated soil by rhamnolipids modified nano zero valent iron (RL@nZVI): Effects and mechanisms.

A kind of biosurfactant rhamnolipid modified zero-valent iron nanoparticles have been synthesized and applied to evaluate the immobilization efficiency of Ni (Ⅱ) contaminated soil at three concentration levels (200Ni, 600Ni and 1800Ni). The results of SEM and XRD were clearly indicative of the well-attached phenomenon of rhamnolipid on the nZVI, featuring better stability and dispersity, and FTIR analysis proposed the interactions between rhamnolipid and nZVI through monodentate chelating between carboxylate groups and nZVI or hydrogen bonding with Fe-O groups on the surface. Sequential extraction procedures (SEP) analysis illustrated that the majority of labile fractions had been transformed into less accessible fractions (Fe-Mn oxide-bound fractions and residual fractions) after 28 days of incubation. And for low-concentrations polluted soil, soil self-remediation played a dominant role, while RL@nZVI exhibited a more significant stabilizing effect for medium and high-concentrations pollution. Furthermore, XPS and XRD analyses of Ni-adsorbed RL@nZVI identified the formation of NiO, Ni(OH)2 and revealed the possible interaction mechanisms including reduction, adsorption and precipitation/co-precipitation. These results confirmed that RL@nZVI presented a promising prospect for the immobilization of Ni polluted soil.

Computational study and optimization experiment of nZVI modified by anionic and cationic polymer for Cr(VI) stabilization in soil: Kinetics and response surface methodology (RSM).

Nanoscale zero-valent iron (nZVI) modified by cationic polyquaternium-7 (M550-nZVI) or anionic carboxymethyl cellulose (CMC-nZVI) were freshly synthesized, and followed by the successful applicability for the stabilization of Cr(VI) in soil. Scanning electron microscope (SEM) showed that the sizes of M550-nZVI and CMC-nZVI were 42-170 nm and 66-200 nm, respectively. X-ray diffraction (XRD) confirmed the presence of Fe0 and Fe3C in the as-synthesized composites. The kinetics were well fitted with pseudo-second order model (R2 > 0.99), indicating that the process was principally chemical reduction. Additionally, we observed that M550-nZVI had better resistance to oxidation than that of CMC-nZVI. Besides, RSM experiments showed that acetate ion (AA) could promote the Cr(VI) removal but humic acid ion (HA) and carbonate ion (CA) resulted in negative effects. Moreover, the modeling predication revealed that the optimum Cr(VI) removal of 92.44% by CMC-nZVI was available, being 22.52% higher than that of M550-nZVI. In conclusion, this work demonstrated that the inoxidizability of M550-nZVI had a dominant advantage, while CMC-nZVI had the more excellent reactivity than M550-nZVI. We believe that our conducted research work will open the new avenues for effective removal of heavy metals from the soil.

Fabrication of Three-Dimensional Microvalves of Internal Nested Structures Inside Fused Silica.

Nested structures inside the hard material play a pivotal role in the microfluidics systems, such as the microvalve and the micropump. In this article, we demonstrate a novel and facile method of fabricating nested structures inside the fused silica with a two-step process femtosecond laser wet etching (FLWE) process. Inside fused silica, a spherical structure was made with a diameter of nearly 80 µm in a square chamber. In addition, we designed a simple microvalve with this sphere controlling the current's flow. The novel microvalve structure can be easily integrated into the functional microfluidics systems and will be widely applied in the Lab-on-chip (LOC) system.

Mini-Review on Bioinspired Superwetting Microlens Array and Compound Eye.

Microlens arrays (MLAs) and MLA-based artificial compound eyes (ACEs) are the important miniaturized optical components in modern micro-optical systems. However, their optical performance will seriously decline once they are wetted by water droplets (such as fog, dew, and rain droplets) or are polluted by contaminations in a humid environment. In this mini-review, we summarize the research works related to the fabrication of superwetting MLAs and ACEs and show how to integrate superhydrophobic and superoleophobic microstructures with an MLA. The fabrication strategy can be split into two categories. One is the hybrid pattern composed of the MLA domain and the superwetting domain. Another is the direct formation of superwetting nanostructures on the surface of the microlenses. The superhydrophobicity or superoleophobicity endows the MLAs and ACEs with liquid repellence and self-cleaning function besides excellent optical performance. We believe that the superwetting MLAs and ACEs will have significant applications in various optical systems that are often used in the humid or liquid environment.

Femtosecond laser hybrid fabrication of a 3D microfluidic chip for PCR application.

Microfluidic chips have gradually become a focus of scientific research. However, the fabrication of key functional components in microfluidic chips is always limited by the existing processing methods. The microfluidic chip is difficult to be three-dimensional (3D) and integrated. In response to the key problems of 3D integrated microfluidic chip fabrication, this paper presents a hybrid method for fabricating a microfluidic chip integrated 3D microchannels and metal microstructures by femtosecond laser wet etch technology and liquid metal injection. The integrated microfluidic chip fabricated by this method is expected to be applied to the core reaction unit of integrated PCR devices.