Interlaboratory study of a supercritical fluid chromatography method for the determination of pharmaceutical impurities: Evaluation of multi-systems reproducibility.

Modern supercritical fluid chromatography (SFC) is now a well-established technique, especially in the field of pharmaceutical analysis. We recently demonstrated the transferability and the reproducibility of a SFC-UV method for pharmaceutical impurities by means of an inter-laboratory study. However, as this study involved only one brand of SFC instrumentation (Waters®), the present study extends the purpose to multi-instrumentation evaluation. Specifically, three instrument types, namely Agilent®, Shimadzu®, and Waters®, were included through 21 laboratories (n = 7 for each instrument). First, method transfer was performed to assess the separation quality and to set up the specific instrument parameters of Agilent® and Shimadzu® instruments. Second, the inter-laboratory study was performed following a protocol defined by the sending lab. Analytical results were examined regarding consistencies within- and between-laboratories criteria. Afterwards, the method reproducibility was estimated taking into account variances in replicates, between-days and between-laboratories. Reproducibility variance was larger than that observed during the first study involving only one single type of instrumentation. Indeed, we clearly observed an 'instrument type' effect. Moreover, the reproducibility variance was larger when considering all instruments than each type separately which can be attributed to the variability induced by the instrument configuration. Nevertheless, repeatability and reproducibility variances were found to be similar than those described for LC methods; i.e. reproducibility as %RSD was around 15 %. These results highlighted the robustness and the power of modern analytical SFC technologies to deliver accurate results for pharmaceutical quality control analysis.

Adsorption of carbon dioxide, methane, and their mixtures in porous carbons: effect of surface chemistry, water content, and pore disorder.

The adsorption of carbon dioxide, methane, and their mixtures in nanoporous carbons in the presence of water is studied using experiments and molecular simulations. Both the experimental and numerical samples contain polar groups that account for their partially hydrophilicity. For small amounts of adsorbed water, although the shape of the adsorption isotherms remain similar, both the molecular simulations and experiments show a slight decrease in the CO2 and CH4 adsorption amounts. For large amounts of adsorbed water, the experimental data suggest the formation of methane or carbon dioxide clathrates in agreement with previous work. In contrast, the molecular simulations do not account for the formation of such clathrates. Another important difference between the simulated and experimental data concerns the number of water molecules that desorb upon increasing the pressure of carbon dioxide and methane. Although the experimental data indicate that water remains adsorbed upon carbon dioxide and methane adsorption, the molecular simulations suggest that 40 to 75% of the initial amount of adsorbed water desorbs with carbon dioxide or methane pressure. Such discrepancies show that differences between the simulated and experimental samples are crucial to account for the rich phase behavior of confined water-gas systems. Our simulations for carbon dioxide-methane coadsorption in the presence of water suggest that the pore filling is not affected by the presence of water and that adsorbed solution theory can be applied for pressures as high as 15 MPa.

An experimental and molecular simulation study of the adsorption of carbon dioxide and methane in nanoporous carbons in the presence of water.

The adsorption of carbon dioxide and methane in nanoporous carbons in the presence of water is studied using experiments and molecular simulations. For all amounts of adsorbed water molecules, the adsorption isotherms for carbon dioxide and methane resemble those obtained for pure fluids. The pore filling mechanism does not seem to be affected by the presence of the water molecules. Moreover, the pressure at which the maximum adsorbed amount of methane or carbon dioxide is reached is nearly insensitive to the loading of preadsorbed water molecules. In contrast, the adsorbed amount of methane or carbon dioxide decreases linearly with the number of guest water molecules. Typical molecular configurations obtained using molecular simulation indicate that the water molecules form isolated clusters within the host porous carbon due to the nonfavorable interaction between carbon dioxide or methane and water.