RESUMEN
Although the amount of amorphous content in lactose is low, its impact on the performance of a dry powder inhalation formulation might be high. Many formulators and regulatory agencies believe that the levels of amorphous content should be controlled once there is a relationship with the final product performance. This is however not an easy task. The current paper elaborates on multiple challenges and complexities that are related to the control of the amorphous content in lactose. The definition and quantification methods of amorphous lactose are reviewed, as well as challenges related to thermodynamic instability. Additionally, current monographs and recent position papers considering this parameter are discussed to provide an overview of the regulatory landscape. Development of a control strategy is recommended, provided that the amorphous content at a specific moment in the process has shown to have an impact on the performance of the dry powder inhaler.
RESUMEN
Hand sanitizers represent a primary measure for the prevention of transmissible infections, whose use has been greatly increased during CoViD-19 pandemic. Most of the commercially available products are hydrogels, employing carbomers as thickening agents. However, few information is still available regarding performances of carbomers in hydroalcoholic media containing a percentage of alcohols ≥ 60% v/v as recommended for disinfection. The aim of this study was to investigate the colloidal behaviour of carbomer 974 and carbomer 980 in hydroalcoholic media containing from 50 to 80% w/w of alcohol (ethanol or isopropanol) and neutralised with triethanolamine or aminomethyl propanol. Both carbomers provide transparent hydrogels in water, but carbomer 980 should be preferred for the formulation of hydrogel with a percentage of alcohol ≥ 50% w/w for its better solvation. The critical alcohol concentration (CAlC), above which polymer precipitation occurs, depends on the type of alcohol and base used. Carbomer dispersions with a higher content of alcohol can be prepared using aminomethyl propanol rather than triethanolamine. The choice of the more suitable components is fundamental for the isopropanol-based dispersions since the CAlC is closer to the recommended concentrations for disinfection. Overall, these results provide helpful insights for the correct preparation of alcohol-based hand sanitizers using carbomers.
Asunto(s)
COVID-19 , Desinfectantes para las Manos , Resinas Acrílicas , Etanol , Humanos , Pandemias , Reología , SARS-CoV-2 , ViscosidadRESUMEN
Cellulosic-based thickeners are commonly used in the preparation of hydro-alcoholic hand sanitisers. Yet, little is known about the behaviour of these polymeric dispersions in hydro-alcoholic mixtures. Here, we studied the dispersion ability and rheology of hydroxyethyl cellulose, hydroxypropyl cellulose, hydroxypropyl methylcellulose and sodium carboxymethyl cellulose in water-ethanol mixtures. Hydroxypropyl cellulose formed transparent dispersions across the entire range of ethanol concentrations, while a critical ethanol concentration (CEC), above which dispersions became turbid, was found for all the other polymers. At and below the CEC, all the rheological parameters followed a bell-like shape profile as a function of ethanol concentration. Moreover, the molecular weight and degree of substitution of the polymers influenced the rheological properties. The CEC and rheological behaviour of the dispersions were both dependent on the ethanol/polymer and water/polymer interactions. As hand disinfectants should contain 60-95% ethanol, polymers of higher CEC, such as hydroxypropyl cellulose and hydroxypropyl methylcellulose, are recommended.
Asunto(s)
Desinfectantes para las Manos , Geles , Derivados de la Hipromelosa , Reología , ViscosidadRESUMEN
Disintegration is the de-aggregation of particles within tablets upon exposure to aqueous fluids. Being an essential step in the bioavailability cascade, disintegration is a fundamental quality attribute of immediate release tablets. Although the disintegration phenomenon has been studied for over six decades, some gaps of knowledge and research questions still exist. Three reviews, published in 2015, 2016 and 2017, have discussed the literature relative to tablet disintegration and summarised the understanding of this topic. Yet, since then more studies have been published, adding to the established body of knowledge. This article guides a step forward towards the comprehension of disintegration by reviewing, concisely, the most recent scientific updates on this topic. Initially, we revisit the mechanisms of disintegration with relation to the three most used superdisintegrants, namely sodium starch glycolate, croscarmellose sodium and crospovidone. Then, the influence of formulation, storage, manufacturing and media conditions on disintegration is analysed. This is followed by an excursus on novel disintegrants. Finally, we highlight unanswered research questions and envision future research venues in the field.
Asunto(s)
Química Farmacéutica , Excipientes , Carboximetilcelulosa de Sodio , Povidona , Solubilidad , Almidón , ComprimidosRESUMEN
This study evaluates the potential use of zein as an excipient in hot-melt extrusion for controlled delivery of diclofenac sodium (DS). Mixtures of zein, polyethylene glycol and drug were hot melt extruded and cut into 2 mm extrudates. Extrudates were characterised using differential scanning calorimetry, X-ray powder diffraction and scanning electron microscopy. The drug in the extrudates was found to be in the non-crystalline state, independent of the drug loading. Moreover, the drug release from extrudates was investigated. The release was directly dependent on the drug loading: a controlled and nearly zero-order release was obtained at the lowest drug loading (12.5% w/w), whereas almost immediate release was achieved at higher drug loadings, i.e. 25% and 37.5%. The release was inversely dependent on the ionic strength of the medium. The influence of digestive enzymes on drug release was also studied. Pancreatin, but not pepsin, was found to have a significant influence on the drug release as well as on the microstructure of zein extrudates. These data therefore support the potential use of zein as excipient in hot melt extrusion for controlled release purposes.
Asunto(s)
Diclofenaco/administración & dosificación , Sistemas de Liberación de Medicamentos/métodos , Tecnología de Extrusión de Fusión en Caliente/métodos , Zeína/química , Rastreo Diferencial de Calorimetría , Preparaciones de Acción Retardada , Liberación de Fármacos , Excipientes/química , Polietilenglicoles/química , Solubilidad , Difracción de Rayos XRESUMEN
Disintegration is the first event in the bioavailability cascade after the ingestion of immediate release tablets. Although the influence of various physico-chemical parameters of media on tablet disintegration has been investigated in depth, the role of temperature has received much less attention. Probing the effect of temperature on disintegration is important in order to understand if previous in vitro studies conducted at room temperature can be related to those performed at body temperature. Moreover, from a biorelevant point of view, a tablet could be co-ingested with a cold or hot drink, inducing transient variations of intragastric temperature; state of fever could also elevate body temperature. Here, we studied the effect of temperature on disintegration of directly compressed tablets made of disintegrants alone and in combination with commonly used diluents and binders, using an image analysis technique as well as a compendial disintegration apparatus. Our results indicate that temperature in the range of 23°C to 41°C had a positive effect on disintegration: tablets tested at higher temperatures exhibited up to 2.9-fold faster disintegration than those tested at lower temperatures. The extent of temperature effect on disintegration time was significantly influenced by the composition of the formulations. Overall, the findings of this study suggest that disintegration results obtained in vitro at room temperature can be qualitatively, but not quantitatively, compared to those obtained at body temperature. We also speculate that although temperature had a moderate influence on in vitro disintegration, the magnitude of this effect is unlikely to impact the oral bioavailability in vivo.
Asunto(s)
Excipientes , Composición de Medicamentos , Solubilidad , Comprimidos , TemperaturaRESUMEN
The world is facing a medical crisis amid the CoViD-19 pandemic and the role of adequate hygiene and hand sanitisers is inevitable in controlling the spread of infection in public places and healthcare institutions. There has been a great surge in demand for hand sanitisation products leading to shortages in their supply. A consequent increase of substandard products in the market has raised safety concerns. This article, therefore, presents a critical review of hand sanitation approaches and products available on the market in light of the scientific evidence available to date. This review also provides a range of hand sanitisation product formulations, and manufacturing instructions to allow for extemporaneous preparations at the community and hospital pharmacies during this urgent crisis. In addition, this emergent situation is expected to continue, hence hand sanitisers will be in demand for an extended time, and the availability and purchase of substandard products on the market create an ongoing safety concern. Therefore, this article shall also provide various commercial organisations, interested in stepping forward the production and marketing of hand sanitisers, with a guide on the development of products of standardised ingredients and formulations.
Asunto(s)
Alcoholes/química , Infecciones por Coronavirus/prevención & control , Desinfectantes/química , Composición de Medicamentos , Desinfección de las Manos/métodos , Higiene de las Manos/métodos , Pandemias/prevención & control , Neumonía Viral/prevención & control , COVID-19 , Desinfectantes/uso terapéutico , HumanosRESUMEN
Zein is an insoluble, yet swellable, biopolymer that has been extensively studied for its applications in drug delivery. Here, we screened the effect of co-excipients on the swelling and drug release of zein tablets. All throughout the study the behavior of zein was benchmarked against that of hydroxypropyl methylcellulose (HPMC) and ethylcellulose (EC). Tablets containing either zein, HPMC, or EC alone or in combination with co-excipients, namely lactose, dicalcium phosphate (DCP), microcrystalline cellulose (MCC), polyvinylpyrrolidone (PVP), or sodium lauryl sulfate (SLS) were prepared by direct compression. Matrix swelling was studied by taking continuous pictures of the tablets over 20 h, using a USB microscope connected to a PC. The overall size change and the axial and radial expansion of the tablets were automatically extrapolated from the pictures by image analysis. Moreover, drug release from tablets containing ternary mixtures of zein, co-excipients and 10% propranolol HCl was also studied. Results showed that zein matrices swelled rapidly at first, but then a plateau was reached, resulting in an initial rapid drug burst followed by slow drug release. HPMC tablets swelled to a greater extent and more gradually, providing a more constant drug release rate. EC did not practically swell, giving a nearly constant drug release pattern. Among the additives studied, only MCC increased the swelling of zein up to nearly three-fold, and thus suppressed drug burst from zein matrices and provided a nearly constant drug release over the test duration. Overall, the incorporation of co-excipients influenced the swelling behavior of zein to a greater extent compared to that of HPMC and EC, indicating that the molecular interactions of zein and additives are clearly more complex and distinct.
RESUMEN
Here we investigated the disintegration action of the natural superdisintegrant soy polysaccharide (SP) and benchmarked it against sodium starch glycolate (SSG) and crospovidone (XPVP). Kinetics and mechanism of disintegration of various tablet formulations were monitored using a USB microscope connected to a computer, followed by image analysis. SP acts mainly by a swelling mechanism and it is most effective at concentrations of 4-8%. Its disintegration action is comparable with that of SSG and XPVP, in most cases. However, SP underperforms compared with these superdisintegrants, in extremely hard tablets containing a hydrophobic component. Moreover, it is more negatively affected by the concentration of magnesium stearate than SSG and XPVP. The disintegration action of SP is not affected by pH and ionic strength of the medium, but it is compromised by the presence of ethanol. This indicates that the concomitant administration of alcoholic beverages might hamper the disintegration of SP-containing tablets. Overall, SP is a promising tablet disintegrant for pharmaceutical and nutraceutical products.
Asunto(s)
Glycine max/química , Polisacáridos/química , Povidona/química , Composición de Medicamentos , Excipientes/química , Interacciones Hidrofóbicas e Hidrofílicas , Cinética , Concentración Osmolar , Solubilidad , Comprimidos/química , Resistencia a la TracciónRESUMEN
Press-coating (also called compression coating or dry coating) consists of a second compression of an outer layer of material over a preformed tablet core. Despite being old, this technology has returned to popularity due to its widespread use in preparation of chronotherapeutic dosage forms. The literature available on press-coated tablets has mainly investigated drug release kinetics, while there is a lack of information about their mechanical properties. Here we study, for the first time, the effect of material properties and manufacturing parameters on the mechanical characteristics of press-coated tablets. Firstly, we show that the stiffness of the bare core tablets depends on the material type and, in case of viscoelastic materials, also depends on the compression pressure. We then demonstrate that less stiff (i.e. more viscoelastic) core tablets deform to a greater extent upon the second compression and thus allow the formation of less porous, harder coats and with a more homogenous density distribution. Finally, we find that changes in the mechanical properties of press-coated tablets over one month storage are almost negligible. Our data suggest that viscoelastic rather than stiff cores should be used in dry coating, as they promote the formation of more homogenous coats and with better mechanical properties.
Asunto(s)
Comprimidos/química , Adsorción , Liberación de Fármacos , Estabilidad de Medicamentos , Dureza , Cinética , Porosidad , Presión , Reología , Solubilidad , Propiedades de Superficie , Resistencia a la TracciónRESUMEN
Disintegration of immediate release tablets originates from the volume expansion of disintegrants within the formulation. Here, we study the impact of ethanol on the disintegrant expansion and on tablets disintegration. The three most commonly used superdisintegrants, namely sodium starch glycolate (SSG), crospovidone (PVPP) and croscarmellose sodium (CCS) were investigated alone and incorporated in dicalcium phosphate and in drug-containing tablets. High (i.e. 40%), but not moderate (i.e. 10%), aqueous ethanol concentrations reduce the size expansion of the three disintegrants compared to water. This "ethanol effect" is the greatest for SSG, followed by CCS and then PVPP. Moreover, the presence of ethanol in the media can significantly influence the disintegration time of drug-containing tablets via affecting both the disintegrant action itself and the drug solubility. For example, the disintegration time of theophylline tablets containing SSG is 8.1-fold greater in 40% aqueous ethanol compared to water. Overall, this study brought to light the existence of a potentially significant interference of alcohol with the disintegration phenomenon, suggesting that the concomitant administration of tablets and intake of alcoholic beverages may affect, in some cases, tablets disintegration. More studies are now needed to verify the importance of the "ethanol effect" on disintegration of commercial dosage forms. Our findings also suggest that PVPP is the disintegrant that is the least affected by alcohol.
Asunto(s)
Etanol/química , Comprimidos/química , Fosfatos de Calcio/química , Carboximetilcelulosa de Sodio/química , Química Farmacéutica/métodos , Excipientes/química , Povidona/química , Solubilidad/efectos de los fármacos , Almidón/análogos & derivados , Almidón/química , Agua/químicaRESUMEN
This study describes the preparation of free films of zein with and without acetylated high amylose maize starch (HAS) and their corresponding coated tablets as a novel approach to colonic drug delivery. We hypothesise that the embedding of a digestible starch component within the inert zein would allow the film to remain intact until the large intestine is reached. Free films of zein alone and starch/zein were prepared and characterized. SEM and AFM images of film surface showed that films were morphologically inhomogeneous, particularly at lower HAS/Zein ratios; however, nanothermal analysis data suggested that these differences in appearance within the same film are not compositional differences. Moreover, FT-IR could detect no molecular interaction between the two polymers. Paracetamol tablets were coated with HAS/Zein aqueous based coatings of different compositions to a TWG of 20%. Drug release from zein alone and 1:5 HAS/Zein coated tablets under upper gastrointestinal conditions (pH 1.2, pH 6.8 with pepsin and pancreatin included) was very similar (for example approximately 12% and 14% of the drug was released, respectively, after 6â¯h in a sequential in vitro test), suggesting that release in this region is limited and is not influenced by the presence of HAS in the ratio to zein under study. Studies using an in vitro colon model showed that under simulated colonic conditions, the drug release was significantly (pâ¯<â¯0.05) more rapid from 1:5â¯HAS/Zein, compared to the zein alone coating formulation. These data therefore support the potential use of zein-starch mixed films for colonic targeting purposes.
Asunto(s)
Amilosa/química , Colon/metabolismo , Sistemas de Liberación de Medicamentos , Zeína/química , Acetaminofén/administración & dosificación , Acetaminofén/química , Acetilación , Administración Oral , Química Farmacéutica/métodos , Liberación de Fármacos , Humanos , Concentración de Iones de Hidrógeno , Polímeros , Espectroscopía Infrarroja por Transformada de Fourier , Almidón/química , Zea mays/químicaRESUMEN
Tablets disintegration is often the result of a size expansion of the tablets. In this study, we quantified the extent and direction of size expansion of tablets during disintegration, using readily available techniques, that is, a digital camera and public domain image analysis software. After validating the method, the influence of disintegrants concentration and diluents type on kinetics and mechanisms of disintegration were studied. Tablets containing diluent, disintegrant (sodium starch glycolate, crospovidone, or croscarmellose sodium), and lubricant were prepared by direct compression. Projected area and aspect ratio of the tablets were monitored using image analysis techniques. The developed method could describe the kinetics and mechanisms of disintegration qualitatively and quantitatively. Sodium starch glycolate and crospovidone acted purely by swelling and shape recovery mechanisms. Instead, croscarmellose sodium worked by a combination of both mechanisms, the extent of which changed depending on its concentration and the diluent type. We anticipate that the method described here could provide a framework for the routine screening of tablets disintegration using readily available equipment.
Asunto(s)
Comprimidos/química , Tecnología Farmacéutica/métodos , Carboximetilcelulosa de Sodio/química , Química Farmacéutica/métodos , Excipientes/química , Cinética , Povidona/química , Programas Informáticos , Solubilidad , Almidón/análogos & derivados , Almidón/química , Agua/químicaRESUMEN
Zein is the main storage protein of corn and it has several industrial applications. Mainly in the last 10-15 years, zein has emerged as a potential pharmaceutical excipient with unique features. Zein is a natural, biocompatible and biodegradable material produced from renewable sources. It is insoluble, yet due to its amphiphilic nature, it has self-assembling properties, which have been exploited for the formation of micromicroparticle and nanoparticle and films. Moreover, zein can hydrate so it has been used in swellable matrices for controlled drug release. Other pharmaceutical applications of zein in oral drug delivery include its incorporation in solid dispersions of poorly soluble drugs and in colonic drug delivery systems. This review describes the features of zein significant for its use as a pharmaceutical excipient for oral drug delivery, and it summaries the literature relevant to macroscopic zein-based oral dosage forms, i.e. tablets, capsules, beads and powders. Particular attention is paid to the most novel formulations and applications of zein. Moreover, gaps of knowledge as well as possible venues for future investigations on zein are highlighted.
Asunto(s)
Sistemas de Liberación de Medicamentos , Excipientes/química , Zeína/química , Administración Oral , ComprimidosRESUMEN
In this study, we evaluate the influence of zein aggregation in aqueous ethanol dispersions on the properties of zein films. The effects of zein concentration, ethanol content and temperature on transmittance of zein dispersions were investigated. Dynamic light scattering was used to measure the degree of zein aggregation in the dispersions. The results indicate that particle size of zein increased with higher zein concentration, lower ethanol level and at lower temperatures. Zein films were prepared by casting from 70% and 90% aqueous ethanol dispersions at different drying temperatures and were evaluated for appearance, thermomechanical and mechanical properties. Higher ethanol levels and higher drying temperatures promoted the formation of more homogenous films. Films made from higher ethanol dispersions had lower glass transition temperatures than those made from lower ethanol dispersions. Moreover, the fragility factor classified the films as strong systems. Mechanical properties of films were measured at different drying temperatures. Stiffer and more resistant films were developed as the drying temperature increased. In conclusion, film properties can be tailored by controlling the composition of the film casting solvent and the drying temperature. Differences in film properties were found to relate to differences in initial degree of aggregation of zein dispersions.
Asunto(s)
Etanol/química , Agregado de Proteínas , Agua/química , Zeína/química , Embalaje de Alimentos/métodos , Humanos , Tamaño de la Partícula , Suspensiones , Resistencia a la Tracción , Temperatura de Transición , Zea mays/química , Zeína/aislamiento & purificaciónRESUMEN
The immersion cell is an in vitro performance test of drug release from semisolids. Several studies made use of immersion cells to investigate drug release from thermosensitive Poloxamer-based gels; however, specifications on the parameter setting are not yet available. Therefore, the aim of this study was to evaluate the influence of testing parameters on tramadol (a model drug) release, release rate, and dissolution efficiency (DE) from Poloxamer gels, using immersion cells. The thermosensitive gelling formulation showed batch-to-batch uniformity of gelling behavior, drug content, and drug release. The use of a membrane in the immersion cell resulted in slower drug release as compared to the absence of a membrane. Moreover, the faster the paddle rotation, the faster the drug release was. Membrane thickness showed a strong and significant linear relationship with corresponding DE values (Pearson's correlation coefficient, r = -0.9470; p = 0.004). Factors that did not influence drug release include paddle position, i.e., distance between paddle and membrane, as well as membrane mean pore size. This study sets forth the importance of carefully controlling the following parameters including presence/absence of membrane, paddle rotation speed, and membrane thickness during the setup of release experiments from gels using immersion cells.