Do Organism Profile and Resistance Patterns Change between First and Subsequent Two-Stage Revision for Periprosthetic Joint Infection?

Increasing antibiotic resistance has been reported as an issue in the treatment of periprosthetic joint infection (PJI). A repeat two-stage revision for recurrent PJI is at high risk of reinfection. However, it is unclear if the microorganism profile plays a role with potentially more resistant or polymicrobial infections. This is a retrospective, single-center analysis of two-stage revisions performed between 2011 and 2017. We identified 46 patients who underwent a repeat resection arthroplasty for recurrent PJI of the same joint after a previous two-stage revision of the same joint at the same department. All microbiological findings were analyzed focusing on microbiological spectrum and resistance testing as well as the potential impact on reinfection-free survival. The most common organism found at the time of recurrent PJI were coagulase-negative Staphylococci (39%) followed by Gram-negative organisms (28%). The risk of polymicrobial infections, difficult-to-treat resistant organisms, and Gram-negative infections increased significantly. Among staphylococcal infections, there was a high percentage of methicillin-resistant species and resistance to oral antibiotics. Patients with Gram-negative organisms had a reduced infection-free survivorship, while resistant organisms were not associated with decreased survival. Patients who undergo a repeat two-stage revision for recurrent PJI have more polymicrobial and resistant organisms, although the impact on survivorship is unclear.

An Ergonomic Golf Grip Leads to Lower Forearm Muscle Activity - A Prospective Case Series of 30 Right-Handed Amateur and Professional Golfers.

BACKGROUND: The elbow is a common site for overuse injuries in golfers. Tendinopathies, such as medial and lateral epicondylitis, are frequently diagnosed in amateur and professional golfers. The aim of our study was to determine the effect of an ergonomic golf grip on forearm muscle activity during the five phases of the golf swing. METHODS: Thirty right-handed golfers with a mean age of 32 years (range, 18-70 years) and a mean handicap of 15 (range, 0-43) performed 10 golf swings with a standard and ergonomic golf grip respectively. The mean and maximum muscle activity of the Musculus (M.) extensor carpi radialis brevis (ECRB), M. flexor carpi ulnaris (FCU), M. pronator teres (PT) and M. biceps brachii (BB) of the lead and trail arms were assessed during the five phases of the golf swing using surface electromyography (EMG). Subgroup analyses were performed regarding sex, playing ability (handicap < 10 vs. ≥10), weekly playing time (≤ 5 h, 5-20 h, > 20 h) and preexisting elbow pain during golfing (VAS < 2 vs. VAS ≥ 2). Significance was set at p < 0.05. RESULTS: An ergonomic golf grip resulted in a reduction in muscle activity in at least one but up to three consecutive phases of the golf swing for the ECRB, FCU and PT of the lead arm and for the PT of the trail arm. Amateurs, a playing time < 20 h per week and golfers without preexisting elbow pain were factors that were associated with greater reductions in muscle activity. CONCLUSION: Forearm muscle activity can be decreased using an ergonomic golf grip, indicating the possible role of an ergonomic golf grip as a preventive measure against overuse syndromes such as medial and lateral epicondylitis. TRIAL REGISTRATION NUMBER: This study was retrospectively registered at the German Clinical Trials Register DRKS-ID: DRKS00033732 (01/03/2024).

Surgical Management of Periprosthetic Joint Infections in Hip and Knee Megaprostheses.

Periprosthetic joint infection is a feared complication after the megaprosthetic reconstruction of oncologic and non-oncologic bone defects of including the knee or hip joint. Due to the relative rarity of these procedures, however, optimal management is debatable. Considering the expanding use of megaprostheses in revision arthroplasty and the high revision burden in orthopedic oncology, the risk of PJI is likely to increase over the coming years. In this non-systematic review article, we present and discuss current management options and the associated results focusing on studies from the last 15 years and studies from dedicated centers or study groups. The indication, surgical details and results in controlling infection are presented for debridement, antibiotics, irrigation and retention (DAIR) procedure with an exchange of the modular components, single-stage implant exchange, two-stage exchanges and ablative procedures.

Can the Current Thresholds for Synovial Cell Count and Neutrophil Percentage to Diagnose Prosthetic Joint Infection be Applied to Metal-on-Metal Rotating Hinge Total Knee Arthroplasty?

BACKGROUND: Synovial leukocyte count analysis is an important tool in the diagnosis of PJI. However, results can be poor if metallosis is present. The issue of metallosis was established for some rotating hinge knee arthroplasty designs. METHODS: This was a retrospective single-center analysis that included 108 patients who had a single-design metal-on-metal rotating hinge knee arthroplasty who underwent revision surgery and had prior synovial fluid analysis performed. The diagnostic accuracy of leukocyte count and the percentage of polymorphonuclear neutrophiles (% PMN) were investigated. RESULTS: Patients who had a PJI had a higher median leukocyte count and % PMN compared to aseptic revisions (7,905/µL (interquartile range (IQR) 2,419 to 37,400) and 85% (IQR 70.3 to 93.8) versus 450 (IQR 167 to 1,215) and 46% (IQR 28.5 to 67.4%), P < .001). The respective areas under the curves were 0.916 (95% confidence interval 0.862 to 0.970) for leukocyte count and 0.821 (95% confidence interval 0.739 to 0.902) for % PMN. We calculated an optimal cut-off value of 1,200 leukocytes/µL (Sensitivity 94.5%/specificity 75.5%) and 63% PMN (Sensitivity 85.5%/specificity 73.6%) to define PJI. Established thresholds were less sensitive, but more specific. The "infection likely" scenario of the European Bone and Joint Infection Society (EBJIS) definition was closest to the calculated thresholds. CONCLUSION: Currently used thresholds for leukocyte cell count and %PMN to define PJI were less sensitive and specific in the diagnosis of PJI in metal-on-metal RHK knees. Surgeons must consider lower cut-off values when evaluating such implants for PJI.

Good Mid-Term Implant Survival of a Novel Single-Design Rotating-Hinge Total Knee Arthroplasty.

BACKGROUND: Rotating-hinge knee (RHK) implants are an option for knee arthroplasty in cases of instability or severe bone loss. However, the revision rate can be increased compared to unconstrained implants which mandate improvements in implant design. This study investigates a novel RHK design for total knee arthroplasty (TKA). METHODS: Retrospective analysis of a single design RHK TKA (GenuX MK, Implantcast) implanted between 2015 and 2019 including 133 patients (21 primary TKA, 112 revisions). The main indication for revision TKA was second-stage reimplantation following infection. The median follow-up amounted to 30 months (IQR 22-47). RESULTS: In total, 13% (18/133) of patients underwent revision surgery after a mean time of 1 month (IQR 0-6). The main reason for the revision was (re-) infection in 8% of patients. All revisions were performed following revision TKA and none following primary TKA. There were no revision surgeries for loosening or instability. The revision-free implant survival of 83% was (95% CI 75-91%) after five years. A higher number of previous surgeries was associated with a greater revision risk (p = 0.05). CONCLUSION: Revision and complex primary TKA using a single-design RHK implant results in good implant survival at mid-term follow-up although infection remains a major concern.

Two-Stage Revision Arthroplasty for Resistant Gram-Positive Periprosthetic Joint Infections Using an Oral Linezolid-Based Antibiotic Regime.

BACKGROUND: Increasing antibiotic resistance has been reported as an issue in the systemic treatment of periprosthetic joint infection (PJI). Linezolid offers the advantages of high oral bioavailability and little resistance; however, efficacy in the treatment of PJI varies considerably, and studies reporting consistent surgical treatment are scarce. METHODS: This is a retrospective, single-center analysis of two-stage revisions performed between 2008 and 2017. We identified 111 patients who met the inclusion criteria. Oral linezolid was given for 28 days following 14 days of intravenous tailored antibiotics in resistant gram-positive PJI. A total of 64% of the patients had methicillin-resistant coagulase-negative staphylococci. The median follow-up was 43 (interquartile range (IQR) 30-57) months. RESULTS: 22% (24/111) of the patients underwent surgery for subsequent infection. The 5-year infection-free survival probability was 77% (95% confidence interval (CI) 69-85). A total of 5% of the patients (6/111) had the same organism at the time of reinfection. The patients with infections caused by other organisms than Coagulase-negative staphylococci tended to have a worse reinfection-free survivorship at five years (70% vs. 81%, p = 0.09). Furthermore, the patients with obesity tended to have reduced reinfection-free survivorship at five years (69% vs. 84%, p = 0.08). Overall, 5% (6/111) of the patients had blood count abnormalities with no treatment discontinuations. CONCLUSION: Two-stage revision arthroplasty with systemic oral linezolid treatment for resistant gram-positive PJI results in an infection control of 77% at the mid-term.

Risk Factors of Proximal Junctional Kyphosis in Adolescent Idiopathic Scoliosis-The Spinous Processes and Proximal Rod Contouring.

Proximal junctional kyphosis (PJK), as one of the most discussed problems after corrective surgery in adolescent idiopathic scoliosis (AIS), is still not fully clarified and seems to be multifactorial. Biomechanical and a few clinical studies have shown the influence of destruction of posterior ligaments by resection of spinous processes and some parameters concerning rod contouring as risk factors for PJK. To verify these results, 192 patients with AIS and corrective surgery via a posterior approach between 2009 and 2017 were included. Radiographic parameters were analyzed preoperatively (preOP), postoperatively (postOP), and with a mean follow up (FU) of 27 months. The participants were divided into two groups (PJK group and non-PJK group). The incidence of PJK was 15.6%. Contrary to the results of biomechanical studies, we could not find any significant influence of the spinous process resection. However, the PJK group had significantly larger preOP T4-T12 kyphosis (31.1° ± 13.93° vs. 23.3° ± 14.93°, p = 0.016). Furthermore, the PJK group showed a significantly larger rod contour angle (RCA) (8.0° ± 4.44° vs. 5.9° ± 3.28°, p = 0.003) and mismatch of postOP proximal junctional angle (PJA) and RCA (3.5° ± 5.72° vs. 0.9° ± 4.86°, p = 0.010) compared to the non-PJK group. An increase in the mismatch of postOP PJA and RCA (OR = 1.14, p = 0.008) and a high RCA are risk factors for PJK and need to be focused on by surgeons.

Effectiveness of Radial Extracorporeal Shockwave Therapy in Patients with Acute Low Back Pain-Randomized Controlled Trial.

The aim of this study was to investigate the effect of radial extracorporeal shockwave therapy (rESWT) primarily on acute lumbar back pain (aLBP), and secondarily on physical function and quality of life. This randomized, placebo-controlled, single-blinded trial with 12-week follow-up (FU) randomized 63 patients with aLBP 1:1 into two groups receiving either rESWT (intervention) or sham rESWT (placebo) with a manipulated shockwave head not delivering any shockwaves. Both, rESWT and sham procedure were carried out eight times for four weeks. Both groups received additional analgesics and physiotherapy twice a week. Primary patient-reported outcome measure (PROM) was the visual analogue scale for aLBP (VAS-LBP). Secondary PROMs included the Oswestry disability index (ODI), Roland and Morris Disability Questionnaire (RDQ), EuroQol EQ-5D-3L, and the Beck Depression Index (BDI-II). Primary endpoint was a between-arm comparison of mean changes in VAS-LBP from baseline to final FU. At randomization, there were no differences between the two groups in relation to age and PROMs. Both groups showed significant improvement in all PROMs at final FU. VAS-LBP declined by 60.7% (p < 0.001) in the intervention and by 86.4% (p < 0.001) in the sham group. The intervention group showed significantly less pain relief after 4 and 12 weeks. The EQ-5D submodality pain showed significantly inferior results for the intervention (1.5 (0.58)) compared to the sham group (1.1 (0.33)) (p < 0.014) after eight weeks. No significant intergroup differences were observed for RDQ, ODI or BDI-II. Additional rESWT alongside conventional guideline therapy in aLBP does not have any significant effects on pain intensity, physical function, or quality of life. To the best of our knowledge, this is the first study with a high level of evidence reporting the efficacy of rESWT in aLBP treatment and will be a future basis for decision-making.

Complex Bone Tumors of the Trunk-The Role of 3D Printing and Navigation in Tumor Orthopedics: A Case Series and Review of the Literature.

The combination of 3D printing and navigation promises improvements in surgical procedures and outcomes for complex bone tumor resection of the trunk, but its features have rarely been described in the literature. Five patients with trunk tumors were surgically treated in our institution using a combination of 3D printing and navigation. The main process includes segmentation, virtual modeling and build preparation, as well as quality assessment. Tumor resection was performed with navigated instruments. Preoperative planning supported clear margin multiplanar resections with intraoperatively adaptable real-time visualization of navigated instruments. The follow-up ranged from 2-15 months with a good functional result. The present results and the review of the current literature reflect the trend and the diverse applications of 3D printing in the medical field. 3D printing at hospital sites is often not standardized, but regulatory aspects may serve as disincentives. However, 3D printing has an increasing impact on precision medicine, and we are convinced that our process represents a valuable contribution in the context of patient-centered individual care.

[E-scooter - a new source of danger in tumor endoprosthetics]. / E-Scooter ­ eine neue Gefahrenquelle in der Tumorendoprothetik.

A 24-year-old male patient who suffered a periprosthetic fracture of the left distal femur due to an e­scooter accident was referred to the outpatient department of tumor orthopedics. The patient had been diagnosed with Ewing's sarcoma of the left proximal tibia 11 years previously that was treated with a tumor endoprosthetic reconstruction. The current periprosthetic fracture required a further bony resection of the distal femur as well as a reconstruction with a knee revision implant. The aim of this case report is to raise awareness for a new potential source of danger in the presented risk group.