RESUMEN
l-Threonine aldolases (LTAs) employing pyridoxal phosphate (PLP) as cofactor can convert low-cost achiral substrates glycine and aldehyde directly into valuable ß-hydroxy-α-amino acids such as (2R,3S)-2-amino-3-hydroxy-3-(4-nitrophenyl) propanoic acid ((R,S)-AHNPA), which is utilized broadly as crucial chiral intermediates for bioactive compounds. However, LTAs' stereospecificity towards the ß carbon is rather moderate and their activity and stability at high substrate load is low, which limits their industrial application. Here, computer-aided directed evolution was applied to improve overall activity, selectivity and stability under desired process conditions of a l-threonine aldolase in the asymmetric synthesis of (R,S)-AHNPA. Selectivity and stability determining regions were computationally identified for structure-guided directed evolution of LTA-variants under efficient biocatalytic process conditions using 40% ethanol as cosolvent. We applied molecular modeling to rationalize selectivity improvement and design focused libraries targeting the substrate binding pocket, and we also used MD simulations in nonaqueous process environment as an effective and promising method to predict potential unstable loop regions near the tetramer interface which are hot-spots for cosolvent resistance. An excellent LTA variant EM-ALDO031 with 18 mutations was obtained, which showed â¼ 30-fold stability improvement in 40% ethanol and diastereoselectivity (de) raised from 31.5% to 85% through a three-phase evolution campaign. Our fast and efficient data-driven methodology utilizing a combination of experimental and computational tools enabled us to evolve an aldolase variant to achieve the target of 90% conversion at up to 150 g/L substrate load in 40% ethanol, enabling the biocatalytic production of ß-hydroxy-α-amino acids from cheap achiral precursors at multi-ton scale.
Asunto(s)
Cloranfenicol , Glicina Hidroximetiltransferasa , Aminoácidos/química , Computadores , Etanol , Glicina Hidroximetiltransferasa/química , Glicina Hidroximetiltransferasa/genética , Glicina Hidroximetiltransferasa/metabolismo , Hidrolasas/metabolismo , Especificidad por SustratoRESUMEN
In nature, enzymes conventionally operate under aqueous conditions. Because of this, aqueous buffers are often the choice for reaction media when enzymes are applied in chemical synthesis. However, to meet the demands of an industrial application, due to the poor water solubility of many industrially relevant compounds, an aqueous reaction system will often not be able to provide sufficient substrate loadings. A switch to a non-aqueous solvent system can provide a solution, which is already common for lipases, but more challenging for biocatalysts from other enzyme classes. The choices in solvent types and systems, however, can be overwhelming. Furthermore, some engineering of the protein structure of biocatalyst formulation is required. In this review, a guide for those working with biocatalysts, who look for a way to increase their reaction productivity, is presented. Examples reported clearly show that bulk water is not necessarily required for biocatalytic reactions and that clever solvent systems design can support increased product concentrations thereby decreasing waste formation. Additionally, under these conditions, enzymes can also be combined in cascades with other, water-sensitive, chemical catalysts. Finally, we show that the application of non-aqueous solvents in biocatalysis can actually lead to more sustainable processes. At the hand of flowcharts, following simple questions, one can quickly find what solvent systems are viable.
RESUMEN
The zinc-dependent medium-chain alcohol dehydrogenase from Rhodococcus erythropolis (ReADH) is one of the most versatile biocatalysts for the stereoselective reduction of ketones to chiral alcohols. Despite its known broad substrate scope, ReADH only accepts carbonyl substrates with either a methyl or an ethyl group adjacent to the carbonyl moiety; this limits its use in the synthesis of the chiral alcohols that serve as a building blocks for pharmaceuticals. Protein engineering to expand the substrate scope of ReADH toward bulky substitutions next to carbonyl group (ethyl 2-oxo-4-phenylbutyrate) opens up new routes in the synthesis of ethyl-2-hydroxy-4-phenylbutanoate, an important intermediate for anti-hypertension drugs like enalaprilat and lisinopril. We have performed computer-aided engineering of ReADH toward ethyl 2-oxo-4-phenylbutyrate and octanone derivatives. W296, which is located in the small binding pocket of ReADH, sterically restricts the access of ethyl 2-oxo-4-phenylbutyrate, octan-3-one or octan-4-one toward the catalytic zinc ion and thereby limits ReADH activity. Computational analysis was used to identify position W296 and site-saturation mutagenesis (SSM) yielded an improved variant W296A with a 3.6-fold improved activity toward ethyl 2-oxo-4-phenylbutyrate when compared to WT ReADH (ReADH W296A: 17.10â U/mg and ReADH WT: 4.7â U/mg). In addition, the regioselectivity of ReADH W296A is shifted toward octanone substrates. ReADH W296A has a more than 16-fold increased activity toward octan-4-one (ReADH W296A: 0.97â U/mg and ReADH WT: 0.06â U/mg) and a more than 30-fold decreased activity toward octan-2-one (ReADH W296A: 0.23â U/mg and ReADH WT: 7.69â U/mg). Computational and experimental results revealed the role of position W296 in controlling the substrate scope and regiopreference of ReADH for a variety of carbonyl substrates.
Asunto(s)
Alcohol Deshidrogenasa/metabolismo , Complejos de Coordinación/metabolismo , Octanos/metabolismo , Rhodococcus/enzimología , Zinc/metabolismo , Alcohol Deshidrogenasa/química , Biocatálisis , Complejos de Coordinación/química , Modelos Moleculares , Simulación del Acoplamiento Molecular , Estructura Molecular , Octanos/química , Ingeniería de Proteínas , Zinc/químicaRESUMEN
Photosynthetic organisms employ two different enzymes for the reduction of the C17 = C18 double bond of protochlorophyllide (Pchlide), yielding the chlorophyll precursor chlorophyllide. First, a nitrogenase-like, light-independent (dark-operative) Pchlide oxidoreductase and secondly, a light-dependent Pchlide oxidoreductase (LPOR). For the latter enzyme, despite decades of research, no structural information is available. Here, we use protein structure modelling, molecular dynamics (MD) simulations combined with multi-wavelength analytical ultracentrifugation (MWA-AUC) and small angle X-ray scattering (SAXS) experiments to derive a consensus model of the LPOR apoprotein and the substrate/cofactor/LPOR ternary complex. MWA-AUC and SAXS experiments independently demonstrate that the apoprotein is monomeric, while ternary complex formation induces dimerization. SAXS-guided modelling studies provide a full-length model of the apoprotein and suggest a tentative mode of dimerization for the LPOR ternary complex, supported by published cross-link constraints. Our study provides a first impression of the LPOR structural organization.
Asunto(s)
Cianobacterias/fisiología , Oxidorreductasas actuantes sobre Donantes de Grupo CH-CH/metabolismo , Fotosíntesis , Pigmentos Biológicos/metabolismo , Apoproteínas/química , Apoproteínas/metabolismo , Modelos Moleculares , Estructura Molecular , Oxidorreductasas actuantes sobre Donantes de Grupo CH-CH/química , Pigmentos Biológicos/química , Multimerización de Proteína , Relación Estructura-ActividadRESUMEN
High sequence and structural homology between mature human insulin-like growth factors IGF-1 and IGF-2 makes serological discrimination by immunodiagnostic IGF tests a challenging task. There is an urgent need for highly specific IGF-1 and IGF-2 antibodies, yet only a short sequence element, i.e. the IGF loop, provides enough difference in sequence to discriminate between the two molecules. We sought to address this unmet demand by investigating novel chimeric immunogens as carriers for recombinant peptide motif grafting. We found Thermus thermophilus sensitive to lysis D (SlyD) and Thermococcus gammatolerans SlyD FK-506-binding protein (FKBP) domains suitable for presentation of the predefined epitopes, namely the IGF-1 and IGF-2 loops. Chimeric SlyD-IGF proteins allowed for the development of exceptionally specific IGF-1 and IGF-2 monoclonal antibodies. The selected antibodies bound with high affinity to the distinct IGF epitopes displayed on the protein scaffolds, as well as on the mature human IGF isoforms. The respective SlyD scaffolds display favorable engineering properties in that they are small, monomeric, and cysteine-free and can be produced in high yields in a prokaryotic host, such as Escherichia coli In conclusion, FKBP domains from thermostable SlyD proteins are highly suitable as a generic scaffold platform for epitope grafting.
Asunto(s)
Anticuerpos Monoclonales/inmunología , Epítopos/inmunología , Factor II del Crecimiento Similar a la Insulina/inmunología , Factor I del Crecimiento Similar a la Insulina/inmunología , Temperatura , Humanos , Simulación de Dinámica MolecularRESUMEN
Downstream processing to obtain enantiopure compounds from a racemic mixture relies mainly on crystallization. Natural transporters can specifically translocate enantiomers through membranes. Here a ß-barrel transmembrane protein FhuA is re-engineered into a chiral channel protein (FhuAF4) to resolve racemic mixtures of d-/l-arginine. The engineered FhuAF4 variant exhibits an enantioselectivity (E-value) of 1.92 and an enantiomeric excess percentage (ee%) of 23.91 at 52.39% conversion. OmniChange mutant libraries at the computationally identified "filter-regions" likely help to identify FhuA variants for enantiomeric separation of other compounds.
Asunto(s)
Arginina/química , Arginina/aislamiento & purificación , Proteínas de la Membrana Bacteriana Externa/química , Proteínas de Escherichia coli/química , Nanoestructuras , Ingeniería de Proteínas , EstereoisomerismoRESUMEN
The enzyme protochlorophyllide oxidoreductase (LPOR) catalyzes the light-driven reduction of protochlorophyllide (Pchlide), a crucial step in chlorophyll biosynthesis. Molecular understanding of the photocatalytic mechanism of LPOR is essential for harnessing light energy to mediate enzymatic reactions. The absence of X-ray crystal structure has promoted the development of LPOR homology models that lack a catalytically competent active site and could not explain the variously reported spectroscopic evidence, including time-resolved optical spectroscopy data. We have refined previous structural models to account for the catalytic active site and the characteristic experimental spectral features of Pchlide binding, including the 26 cm-1 red shift of the C13(1) carbonyl stretch vibration in the mid-infrared (IR) and the 12 nm red shift of the Q x electronic band. A hierarchy of theoretical methods, including homology modeling, molecular dynamics simulations, hybrid quantum mechanics [(TD-)DFT]/molecular mechanics [AMBER] calculations, and computational vibrational and electronic spectroscopies, have been combined in an iterative protocol to reproduce experimental evidence and to predict ultrafast transient IR spectroscopic fingerprints associated with the catalytic process. The successful application to the LPOR enzyme indicates that the presented hierarchical protocol provides a general workflow to protein structure refinement.
Asunto(s)
Simulación de Dinámica Molecular , Oxidorreductasas actuantes sobre Donantes de Grupo CH-CH/química , Biocatálisis , Dominio Catalítico , Cianobacterias/metabolismo , Oxidorreductasas actuantes sobre Donantes de Grupo CH-CH/metabolismo , Teoría Cuántica , Espectrofotometría InfrarrojaRESUMEN
Glucose oxidase (GOx) is of high industrial interest for glucose sensing because of its high ß-d-glucose specificity. The efficient and specific electrochemical communication between the redox center and electrodes is crucial to ensure accurate glucose determination. The efficiency of the electron transfer rates (ETR) with GOx, together with quinone diamine based mediators, is low and differs even among mediator derivatives. To design optimized enzyme-mediator couples and to describe a mediator binding model, a joint experimental and computational study was performed based on an oxygen-independent GOx variant V7 and two quinone diimine based electron mediators (QDM-1 and QDM-2), which differ in polarity and size, and ferrocenemethanol (FM). A site saturation library at position 414 was screened with all three mediators and yielded four beneficial substitutions Tyr, Met, Leu, and Val. The variants showed increased mediator activity for the more polar QDM-2 with a simultaneously decreased activity for the less polar and smaller QDM-1 and for FM. The variant GOx V7-I414Y exhibited the biggest change for the quinone diimine derivatives compared with V7 (QDM-1: 55.9 U/mg V7, 33.2 U/mg V7-I414Y; QDM-2: 2.7 U/mg V7, 12.9 U/mg V7-I414Y). Theoretical ETR calculated based on the Marcus theory were in good agreement with the experimental results. Molecular docking studies revealed a preferable binding of the two QD mediators directly in the active site, 3.5 Å away from the N5 atom of the flavin adenine dinucleotide (FAD) and in direct vicinity to position 414. In summary, position 414 in the active site was identified to modulate the electron shuttling from the FAD of the GOx to small water-soluble mediators dependent on the polarity and size of residue 414 and on the polarity and size of the mediator. The presented mediator binding model offers a promising possibility for the design of optimized enzyme-mediator couples.
Asunto(s)
Benzoquinonas/química , Glucosa Oxidasa/química , Glucosa/química , Simulación del Acoplamiento Molecular , Oxígeno/química , Ingeniería de Proteínas , Dominio Catalítico , Transporte de Electrón , Glucosa Oxidasa/genética , Proteínas Recombinantes/química , Proteínas Recombinantes/genéticaRESUMEN
Understanding of the structural and dynamic properties of enzymes in non-aqueous media (e.g., ionic liquids, ILs) is highly attractive for protein engineers and synthetic biochemists. Despite a growing number of molecular dynamics (MD) simulation studies on the influence of different ILs on wild-type enzymes, the effects of various amino acid substitutions on the stability and activity of enzymes in ILs remain to be unraveled at the molecular level. Herein, we selected fifty previously reported Bacillus subtilis lipase A (BSLA) variants with increased resistance towards an IL (15 vol% 1-butyl-3-methylimidazolium trifluoromethanesulfonate; [Bmim][TfO]), and also ten non-resistant BSLA variants for a MD simulation study to identify the underlying molecular principles. Some important properties differentiating resistant and non-resistant BSLA variants from wild-type were elucidated. Results show that, in 15 vol% [Bmim][TfO] aqueous solution, 40% and 60% of non-resistant variants have lower and equal probabilities to form a catalytically important hydrogen bond between S77 and H156 compared to wild-type, whereas 36% and 56% of resistant variants show increased and equal probabilities, respectively. Introducing positively charged amino acids close to the substrate-binding cleft for instance I12R is beneficial for the BSLA resistance towards 15 vol% [Bmim][TfO], likely due to the reduced probability of [Bmim]+ cations clustering near the cleft. In contrast, substitution with a large hydrophobic residue like I12F can block the cleft through hydrophobic interaction with a neighboring nonpolar loop 134-137 or/and an attractive π-π interaction with [Bmim]+ cations. In addition, the resistant variants having polar substitutions on the surface show higher ability to stabilize the surface water molecule network in comparison to non-resistant variants. This study can guide experimentalists to rationally design promising IL-resistant enzymes, and contribute to a deeper understanding of protein-IL interactions at the molecular level.
Asunto(s)
Líquidos Iónicos/química , Lipasa/química , Simulación de Dinámica Molecular , Sustitución de Aminoácidos , Bacillus subtilis , Transporte Biológico , Catálisis , Cationes , Enlace de Hidrógeno , Interacciones Hidrofóbicas e Hidrofílicas , Imidazoles/química , Mesilatos/química , Conformación Proteica , Relación Estructura-ActividadRESUMEN
Protein engineering of enzyme loop regions is an effective strategy to improve enzymatic properties. Previous studies that aimed to boost the activity of PpADI (an arginine deiminase from Pseudomonas plecoglossicida) under physiological conditions yielded several significantly improved variants that harbor substitutions predominantly located in active-site-decorating loops. A multi-site saturation mutagenesis at four positions in loop 1 (37, 38, 42, and 43) and three positions in loop 4 (402, 403, and 404) was performed to elucidate the importance of these loops in modulating the substrate affinity of PpADI. The identified "best" variant (M6-L1-4) showed a decreased S0.5 ('KM') of 0.48â¯mM compared with the parent M6 (0.81â¯mM). Subsequently, a rational design to recombine beneficial substitutions within loops 1 and 4 yielded variant L6 with a substantially decreased S0.5 value (0.17â¯mM). A comprehensive simulation analysis resulted in a conclusion that high loop flexibility (especially the gating residue Arg400) is beneficial for substrate affinity due to less efficient blocking of the active site.
Asunto(s)
Dominio Catalítico , Hidrolasas/química , Hidrolasas/metabolismo , Ingeniería de Proteínas , Pseudomonas/enzimología , Secuencia de Aminoácidos , Cinética , Simulación de Dinámica Molecular , Proteínas Mutantes/química , Estructura Secundaria de Proteína , Homología Estructural de Proteína , Relación Estructura-Actividad , Especificidad por SustratoRESUMEN
Enzyme-catalyzed ring-opening polymerization of lactones is a method of increasing interest for the synthesis of polyesters. In the present work, we investigated which changes in the structure of Candida antarctica lipase B (CaLB) shift the catalytic equilibrium between esterification and hydrolysis towards polymerization. Therefore, we present two concepts: (i) removing the glycosylation of CaLB to increase the surface hydrophobicity; and (ii) introducing a hydrophobic lid adapted from Pseudomonas cepacia lipase (PsCL) to enhance the interaction of a growing polymer chain to the elongated lid helix. The deglycosylated CaLB (CaLB-degl) was successfully generated by site-saturation mutagenesis of asparagine 74. Furthermore, computational modeling showed that the introduction of a lid helix at position Ala148 was structurally feasible and the geometry of the active site remained intact. Via overlap extension PCR the lid was successfully inserted, and the variant was produced in large scale in Pichia pastoris with glycosylation (CaLB-lid) and without (CaLB-degl-lid). While the lid variants show a minor positive effect on the polymerization activity, CaLB-degl showed a clearly reduced hydrolytic and enhanced polymerization activity. Immobilization in a hydrophobic polyglycidol-based microgel intensified this effect such that a higher polymerization activity was achieved, compared to the "gold standard" Novozym® 435.
RESUMEN
P450 BM3 is a multi-domain heme-containing soluble bacterial monooxygenase. P450 BM3 and variants are known to oxidize structurally diverse substrates. Crystal structures of individual domains of P450 BM3 are available. However, the spatial organization of the full-length protein is unknown. In this study, crystal structures of the P450 BM3 M7 heme domain variant with and without cobalt (III) sepulchrate are reported. Cobalt (III) sepulchrate acts as an electron shuttle in an alternative cofactor system employing zinc dust as the electron source. The crystal structure shows a binding site for the mediator cobalt (III) sepulchrate at the entrance of the substrate access channel. The mediator occupies an unusual position which is far from the active site and distinct from the binding of the natural redox partner (FAD/NADPH binding domain).
Asunto(s)
Bacillus megaterium/química , Proteínas Bacterianas/química , Cobalto/química , Coenzimas/química , Sistema Enzimático del Citocromo P-450/química , Electrones , Hemo/química , NADPH-Ferrihemoproteína Reductasa/química , NADP/química , Bacillus megaterium/enzimología , Proteínas Bacterianas/genética , Proteínas Bacterianas/metabolismo , Dominio Catalítico , Clonación Molecular , Cobalto/metabolismo , Coenzimas/metabolismo , Cristalografía por Rayos X , Sistema Enzimático del Citocromo P-450/genética , Sistema Enzimático del Citocromo P-450/metabolismo , Escherichia coli/genética , Escherichia coli/metabolismo , Expresión Génica , Hemo/metabolismo , Modelos Moleculares , NADP/metabolismo , NADPH-Ferrihemoproteína Reductasa/genética , NADPH-Ferrihemoproteína Reductasa/metabolismo , Unión Proteica , Conformación Proteica en Hélice alfa , Conformación Proteica en Lámina beta , Dominios y Motivos de Interacción de Proteínas , Proteínas Recombinantes/química , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Especificidad por Sustrato , Zinc/química , Zinc/metabolismoRESUMEN
Directed evolution of limonene epoxide hydrolase (LEH), which catalyzes the hydrolytic desymmetrization reactions of cyclopentene oxide and cyclohexene oxide, results in (R,R)- and (S,S)-selective mutants. Their crystal structures combined with extensive theoretical computations shed light on the mechanistic intricacies of this widely used enzyme. From the computed activation energies of various pathways, we discover the underlying stereochemistry for favorable reactions. Surprisingly, some of the most enantioselective mutants that rapidly convert cyclohexene oxide do not catalyze the analogous transformation of the structurally similar cyclopentene oxide, as shown by additional X-ray structures of the variants harboring this slightly smaller substrate. We explain this puzzling observation on the basis of computational calculations which reveal a disrupted alignment between nucleophilic water and cyclopentene oxide due to the pronounced flexibility of the binding pocket. In contrast, in the stereoselective reactions of cyclohexene oxide, reactive conformations are easily reached. The unique combination of structural and computational data allows insight into mechanistic details of this epoxide hydrolase and provides guidance for future protein engineering in reactions of structurally different substrates.
Asunto(s)
Biocatálisis , Ciclohexenos/metabolismo , Epóxido Hidrolasas/química , Epóxido Hidrolasas/metabolismo , Proteínas Mutantes/química , Proteínas Mutantes/metabolismo , Mutación , Terpenos/metabolismo , Epóxido Hidrolasas/genética , Limoneno , Simulación de Dinámica Molecular , Estructura Molecular , Proteínas Mutantes/genética , Teoría Cuántica , EstereoisomerismoRESUMEN
Blue-light absorption by the flavin chromophore in light, oxygen, voltage (LOV) photoreceptors triggers photochemical reactions that lead to the formation of a flavin-cysteine adduct. While it has long been assumed that adduct formation is essential for signaling, it was recently shown that LOV photoreceptor variants devoid of the photoactive cysteine can elicit a functional response and that flavin photoreduction to the neutral semiquinone radical is sufficient for signal transduction. Currently, the mechanistic basis of the underlying electron- (eT) and proton-transfer (pT) reactions is not well understood. We here reengineered pT into the naturally not photoreducible iLOV protein, a fluorescent reporter protein derived from the Arabidopsis thaliana phototropin-2 LOV2 domain. A single amino-acid substitution (Q489D) enabled efficient photoreduction, suggesting that an eT pathway is naturally present in the protein. By using a combination of site-directed mutagenesis, steady-state UV/Vis, transient absorption and electron paramagnetic resonance spectroscopy, we investigate the underlying eT and pT reactions. Our study provides strong evidence that several Tyr and Trp residues, highly conserved in all LOV proteins, constitute the eT pathway for flavin photoreduction, suggesting that the propensity for photoreduction is evolutionary imprinted in all LOV domains, while efficient pT is needed to stabilize the neutral semiquinone radical.
Asunto(s)
Cisteína/metabolismo , Transporte de Electrón , Células Fotorreceptoras/metabolismo , Proteínas/metabolismo , Mononucleótido de Flavina/química , Mononucleótido de Flavina/metabolismo , Genes Reporteros , Concentración de Iones de Hidrógeno , Luz , Oxígeno/metabolismo , Procesos Fotoquímicos , Células Fotorreceptoras/efectos de la radiación , Proteínas/química , Proteínas/genética , Proteínas Recombinantes de Fusión , Análisis EspectralRESUMEN
Covering hydrophobic regions with stabilization agents to solubilize purified transmembrane proteins is crucial for their application in aqueous media. The small molecule 2-methyl-2,4-pentanediol (MPD) was used to stabilize the transmembrane protein Ferric hydroxamate uptake protein component A (FhuA) utilized as host for the construction of a rhodium-based biohybrid catalyst. Unlike commonly used detergents such as sodium dodecyl sulfate or polyethylene polyethyleneglycol, MPD does not form micelles in solution. Molecular dynamics simulations revealed the effect and position of stabilizing MPD molecules. The advantage of the amphiphilic MPD over micelle-forming detergents is demonstrated in the polymerization of phenylacetylene, showing a ten-fold increase in yield and increased molecular weights.
RESUMEN
Expanding the substrate scope of enzymes opens up new routes for synthesis of valuable chemicals. Ketone-functionalized fatty acid derivatives and corresponding chiral alcohols are valuable building blocks for the synthesis of a variety of chemicals including pharmaceuticals. The alcohol dehydrogenase from Candida parapsilosis (cpADH5) catalyzes the reversible oxidations of chiral alcohols and has a broad substrate range; a challenge for cpADH5 is to convert alcohols with small substituents (methyl or ethyl) next to the oxidized alcohol moiety. Molecular docking studies revealed that W286 is located in the small binding pocket and limits the access to substrates that contain aliphatic chains longer than ethyl substituent. In the current manuscript, we report that positions L119 and W286 are key residues to boost oxidation of medium chain methyl 3-hydroxy fatty acids; interestingly the enantiopreference toward methyl 3-hydroxybutyrate was inverted. Kinetic characterization of W286A showed a 5.5 fold increase of Vmax and a 9.6 fold decrease of Km values toward methyl 3-hydroxyhexanoate (Vmax : 2.48â U mg- and Km : 4.76â mm). Simultaneous saturation at positions 119 and 286 library yielded a double mutant (L119M/W286S) with more than 30-fold improved activity toward methyl 3-hydroxyoctanoate (WT: no conversion; L119M/W286S: 30 %) and inverted enantiopreference (S-enantiomer ≥99 % activity decrease and R-enantiomer >20-fold activity improvement) toward methyl 3-hydroxybutyrate.
RESUMEN
The high interfacial activity of protein-polymer conjugates has inspired their use as stabilizers for Pickering emulsions, resulting in many interesting applications such as synthesis of templated micro-compartments and protocells or vehicles for drug and gene delivery. In this study we report, for the first time, the stabilization of Pickering emulsions with conjugates of a genetically modified transmembrane protein, ferric hydroxamate uptake protein component A (FhuA). The lysine residues of FhuA with open pore (FhuA ΔCVFtev) were modified to attach an initiator and consequently controlled radical polymerization (CRP) carried out via the grafting-from technique. The resulting conjugates of FhuA ΔCVFtev with poly(N-isopropylacrylamide) (PNIPAAm) and poly((2-dimethylamino)ethyl methacrylate) (PDMAEMA), the so-called building blocks based on transmembrane proteins (BBTP), have been shown to engender larger structures. The properties such as pH-responsivity, temperature-responsivity and interfacial activity of the BBTP were analyzed using UV-Vis spectrophotometry and pendant drop tensiometry. The BBTP were then utilized for the synthesis of highly stable Pickering emulsions, which could remain non-coalesced for well over a month. A new UV-crosslinkable monomer was synthesized and copolymerized with NIPAAm from the protein. The emulsion droplets, upon crosslinking of polymer chains, yielded micro-compartments. Fluorescence microscopy proved that these compartments are of micrometer scale, while cryo-scanning electron microscopy and scanning force microscopy analysis yielded a thickness in the range of 11.1 ± 0.6 to 38.0 ± 18.2 nm for the stabilizing layer of the conjugates. Such micro-compartments would prove to be beneficial in drug delivery applications, owing to the possibility of using the channel of the transmembrane protein as a gate and the smart polymer chains as trigger switches to tune the behavior of the capsules.
Asunto(s)
Proteínas de la Membrana Bacteriana Externa/química , Proteínas de Escherichia coli/química , Nanoestructuras/química , Polímeros/química , Concentración de Iones de Hidrógeno , Lisina , Modelos Moleculares , Dominios Proteicos , TemperaturaRESUMEN
The quality of amino acid substitution patterns in random mutagenesis libraries is decisive for the success in directed evolution campaigns. In this manuscript, we provide a detailed analysis of the amino acid substitutions by analyzing 3000 mutations of three random mutagenesis libraries (1000 mutations each; epPCR with a low-mutation and a high-mutation frequency and SeSaM-Tv P/P) employing lipase A from Bacillus subtilis (bsla). A comparison of the obtained numbers of beneficial variants in the mentioned three random mutagenesis libraries with a site saturation mutagenesis (SSM) (covering the natural diversity at each amino acid position of BSLA) concludes the diversity analysis. Seventy-six percent of the SeSaM-Tv P/P-generated substitutions yield chemically different amino acid substitutions compared to 64% (epPCR-low) and 69% (epPCR-high). Unique substitutions from one amino acid to others are termed distinct amino acid substitutions. In the SeSaM-Tv P/P library, 35% of all theoretical distinct amino acid substitutions were found in the 1000 mutation library compared to 25% (epPCR-low) and 26% (epPCR-high). Thirty-six percent of distinct amino acid substitutions found in SeSaM-Tv P/P were unobtainable by epPCR-low. Comparison with the SSM library showed that epPCR-low covers 15%, epPCR-high 18%, and SeSaM-Tv P/P 21% of obtainable beneficial amino acid positions. In essence, this study provides first insights on the quality of epPCR and SeSaM-Tv P/P libraries in terms of amino acid substitutions, their chemical differences, and the number of obtainable beneficial amino acid positions.
Asunto(s)
Sustitución de Aminoácidos , Biblioteca de Genes , Mutagénesis , Mutación , Bacillus subtilis/enzimología , Análisis Mutacional de ADN , Evolución Molecular Dirigida/métodos , Lipasa/genética , Reacción en Cadena de la Polimerasa/métodos , Ingeniería de Proteínas/métodosRESUMEN
OBJECTIVES: To explore systemic effects of mutations in the UDP-N-acetylmuramoylalanyl-D-glutamate 2,6-diaminopimelate ligase (MurE) of Corynebacterium glutamicum, that leads to extracellular L-lysine accumulation by this bacterium. RESULTS: The analysis of a mutant cohort of C. glutamicum strains carrying all possible 20 amino acids at position 81 of MurE revealed unexpected effects on cellular properties. With increasing L-lysine accumulation the growth rate of the producing strain is reduced. A dynamic flux balance analysis including the flux over MurE fully supports this finding and suggests that further reductions at this flux control point would enhance L-lysine accumulation even further. The strain carrying the best MurE variant MurE-G81K produces 37 mM L-lysine with a yield of 0.17 g/g (L-lysine·HCl/glucose·H2O), bearing no other genetic modification. Interestingly, among the strains with high L-lysine titers, strain variants occur which, despite possessing the desired amino acid substitutions in MurE, have regained close to normal growth and correspondingly lower L-lysine accumulation. Genome analyses of such variants revealed the transposition of mobile genetic elements which apparently annulled the favorable consequences of the MurE mutations on L-lysine formation. CONCLUSION: MurE is an attractive target to achieve high L-lysine accumulation, and product formation is inversely related to the specific growth rate. Moreover, single point mutations leading to elevated L-lysine titers may cause systemic effects on different levels comprising also major genome modifications. The latter caused by the activity of mobile genetic elements, most likely due to the stress conditions being characteristic for microbial metabolite producers.
Asunto(s)
Proteínas Bacterianas/metabolismo , Corynebacterium glutamicum/enzimología , Corynebacterium glutamicum/metabolismo , Lisina/metabolismo , Péptido Sintasas/metabolismo , Proteínas Bacterianas/genética , Péptido Sintasas/genéticaRESUMEN
The research on protein-polymer conjugates by grafting from the surface of proteins has gained significant interest in the last decade. While there are many studies with globular proteins, membrane proteins have remained untouched to the best of our knowledge. In this study, we established the conjugate formation with a class of transmembrane proteins and grow polymer chains from the ferric hydroxamate uptake protein component A (FhuA; a ß-barrel transmembrane protein of Escherichia coli). As the lysine residues of naturally occurring FhuA are distributed over the whole protein, FhuA was reengineered to have up to 11 lysines, distributed symmetrically in a rim on the membrane exposed side (outside) of the protein channel and exclusively above the hydrophobic region. Reengineering of FhuA ensures a polymer growth only on the outside of the ß-barrel and prevents blockage of the channel as a result of the polymerization. A water-soluble initiator for controlled radical polymerization (CRP) was consecutively linked to the lysine residues of FhuA and N-isopropylacrylamide (NIPAAm) polymerized under copper-mediated CRP conditions. The conjugate formation was analyzed by using MALDI-ToF mass spectrometry, SDS-PAGE, circular dichroism spectroscopy, analytical ultracentrifugation, dynamic light scattering, transmission electron microscopy and size exclusion chromatography. Such conjugates combine the specific functions of the transmembrane proteins, like maintaining membrane potential gradients or translocation of substrates with the unique properties of synthetic polymers such as temperature and pH stimuli handles. FhuA-PNIPAAm conjugates will serve as functional nanosized building blocks for applications in targeted drug delivery, self-assembly systems, functional membranes and transmembrane protein gated nanoreactors.