Osteoformation potential of an allogenic partially demineralized bone matrix in critical-size defects in the rat calvarium.

Allogenic demineralized bone matrix has been developed as a reliable alternative to the autologous bone graft. In the present study, we assessed the osteoformation potential of a partially demineralized bone matrix (PDBM) in a paste form obtained without an added carrier. This formulation included the preparation of cancelous bone from femoral heads after decellularision, delipidation, demineralization in HCl and autoclaving at 121 °C. Structural and biochemical characteristics of PDBM were determined using FTIR (Fourier transform infrared spectroscopy), hydroxyproline, DNA content assays, and optical ellipsometry. The osteoformation potential was evaluated in 8-, 6-, and 4-mm-diameter rat-calvarial bone defects by in vivo micro-CT analysis, performed immediately after surgery on days 0, 15, 30, 45, and 60. Moreover, histological and histomorphometric analyses were done on day 60. PDBM was compared to cancelous bone powder (BP) before its partial demineralization. The expression levels of selected inflammation-, angiogenesis-, and bone-related genes were also investigated by RT-PCR, 3, 7, and 14 days after surgery. Compared to the control group, the PDBM group exhibited a significant increase (p < 0.05) in radiopacity in 8-mm- and 6-mm-diameter defects at all time points tested. On day 60, the amount of newly-formed bone was greater (16 and 1.6 folds; p < 0.001; respectively) compared to that in control defects. No bone formation was observed in defects filled with BP regardeless of the size. In 8-mm-diameter defect, PDBM was effective enough to induce the upregulation of genes pertinent to inflammation (i.e., TNFα, IL-6, and IL-8), angiogenesis (i.e., VEGF, VWF), and osteogenesis (ALP, RUNX2, BGLAP, SP7) by day 3 after surgery. This study showed that the tested PDBM deeply influences the early critical events involved in bone regeneration and exhibits efficient osteoformation capacity, making it an attractive graft option for treating defects in periodontal and maxillofacial areas.

New Generation of Hybrid Materials Based on Gelatin and Bioactive Glass Particles for Bone Tissue Regeneration.

Hybrid scaffolds based on bioactive glass (BAG) particles (<38 µm), covalently linked to gelatin (G*) using 3-glycidoxypropyltrimethoxysilane (GPTMS), have been studied for bone bioengineering. In this study, two glass compositions (13-93 and 13-93B20 (where 20% of the SiO2 was replaced with B2O3)) were introduced in the gelatin matrix. The Cfactor (gelatin/GPTMS molar ratio) was kept constant at 500. The hybrids obtained were found to be stable at 37 °C in solution, the condition in which pure gelatin is liquid. All hybrids were characterized by in vitro dissolution in Tris(hydroxymethyl)aminomethane (TRIS) solution (for up to 4 weeks) and Simulated Body Fluid (SBF) (for up to 2 weeks). Samples processed with 13-93B20 exhibited faster initial dissolution and significantly faster precipitation of a hydroxyapatite (HA) layer. The faster ion release and HA precipitation recorded from the G*/13-93B20 samples are attributable to the higher reactivity of borosilicate compared to silicate glass. The MC3T3-E1 cell behavior in direct contact with the hybrids was investigated, showing that the cells were able to proliferate and spread on the developed biomaterials. Tailoring the glass composition allows us to better control the material's dissolution, biodegradability, and bioactivity. Bioactive (especially with 13-93B20 BAG) and biocompatible, the hybrids are promising for bone application.

Polyol-Made Luminescent and Superparamagnetic ß-NaY0.8Eu0.2F4@γ-Fe2O3 Core-Satellites Nanoparticles for Dual Magnetic Resonance and Optical Imaging.

Red luminescent and superparamagnetic ß-NaY0.8Eu0.2F4@γ-Fe2O3 nanoparticles, made of a 70 nm-sized ß-NaY0.8Eu0.2F4 single crystal core decorated by a 10 nm-thick polycrystalline and discontinuous γ-Fe2O3 shell, have been synthesized by the polyol process. Functionalized with citrate ligands they show a good colloidal stability in water making them valuable for dual magnetic resonance and optical imaging or image-guided therapy. They exhibit a relatively high transverse relaxivity r2 = 42.3 mM-1·s-1 in water at 37 °C, for an applied static magnetic field of 1.41 T, close to the field of 1.5 T applied in clinics, as they exhibit a red emission by two-photon excited fluorescence microscopy. Finally, when brought into contact with healthy human foreskin fibroblast cells (BJH), for doses as high as 50 µg·mL-1 and incubation time as long as 72 h, they do not show evidence of any accurate cytotoxicity, highlighting their biomedical applicative potential.

Coating of cobalt chrome substrates with thin films of polar/hydrophobic/ionic polyurethanes: Characterization and interaction with human immunoglobulin G and fibronectin.

Biomaterial implants often lead to specific tissue reactions that could compromise their bio-integration and/or optimal cellular interactions. Polyurethanes (PU) are of particular interest as coatings to mask CoCr's bioactivity, since they are generally more biocompatible than metal substrates, present a broad range of chemistry, and have highly tunable-mechanical properties. In the current work, complex polyvinyl-urethanes (referred to as D-PHI materials) are studied for their surface phase structures: specifically, an original D-PHI polymer (O-D-PHI) and a differential formulation with relatively higher hydrophobic and ionic content (HHHI) are of interest. The PUs are diluted in tetrahydrofuran (THF) to generate thin films which differentially influence the physical and chemical properties of the D-PHI coatings. AFM images over time show the gradual appearance of domains exhibiting crystalline organisation, and whose shape and size were dependent on D-PHI thickness (thin films vs non-solvent cast resin materials). After three weeks, a complete stabilization of the crystal state is observed. The thin coatings are stable in an aqueous and 37 °C environment. The adsorption of two human plasmatic proteins Immunoglobulin G (IgG) and Fibronectin (Fn), involved in inflammation and coagulation, was studied. The exposure of specific protein sequences (IgG-Fab, Fn-Cell Binding Domain and Fn-N-terminal domain) were dramatically reduced on both D-PHI materials when compared to bare metal CoCr. The implications of these findings would be relevant to defining coating strategies used to improve the blood clotting and immune cell reactivity to CoCr implant materials.

The first one-pot synthesis of undoped and Eu doped ß-NaYF4 nanocrystals and their evaluation as efficient dyes for nanomedicine.

Polygonal-shaped about 75 nm sized and highly crystallized Eu3+-doped ß-NaYF4 particles were directly prepared under mild conditions using the polyol process. A set of operating parameters were optimized for such a purpose. A conventional heating under reflux for 30 min of a mixture of Y(III) and Eu(III) acetate, ammonium fluoride, sodium hydroxide and oleic acid (OA) dissolved in ethyleneglycol offered a pertinent material processing route if a large excess of NH4F and an enough amount of OA were used. Typically, the former parameter provides an exclusive stabilization of the desired ß allotropic form, while the latter allows a significant size decrease of the particles. Thanks to their coating by a double OA layer, the produced particles exhibited a hydrophilic surface feature when dispersed in water and when excited under UV light they emitted a very intense red photoluminescence. Additionally, they did not evidence any accurate cytotoxicity when incubated with healthy human foreskin fibroblast (BJH) cells for doses as high as 50 µg·mL-1 and contact time as long as 48 h, highlighting the ability of the prepared particles to be used as efficient down-converter light sources for cell labelling.

Behaviour of silica nanoparticles in dermis-like cellularized collagen hydrogels.

A model of the fate of colloidal silica in the dermis was designed based on the diffusion of fluorescent silica nanoparticles through collagen hydrogels. The diffusion process was found to depend on particle size (10-200 nm) and surface charge, as well as on collagen concentration (1.5-5 mg mL-1). The presence of human dermal fibroblasts within the hydrogels also significantly impacted on the behaviour of the particles. In particular, the simultaneous monitoring of particulate and soluble forms of silica showed that both the hydrogel network and the cellular activity have a strong influence on the solubilization process of the silica particles, through a combination of surface sorption, uptake and intracellular dissolution. Interactions between silica and collagen in 3D environments also lower the cytotoxicity of 10 nm particles compared to traditional 2D cultures. The results emphasize the complexity of silica chemistry in living tissues and specifically indicate the need for further investigations of the in vivo behaviour of its soluble forms.

Design of Magnetic Gelatine/Silica Nanocomposites by Nanoemulsification: Encapsulation versus in Situ Growth of Iron Oxide Colloids.

The design of magnetic nanoparticles by incorporation of iron oxide colloids within gelatine/silica hybrid nanoparticles has been performed for the first time through a nanoemulsion route using the encapsulation of pre-formed magnetite nanocrystals and the in situ precipitation of ferrous/ferric ions. The first method leads to bi-continuous hybrid nanocomposites containing a limited amount of well-dispersed magnetite colloids. In contrast, the second approach allows the formation of gelatine-silica core-shell nanostructures incorporating larger amounts of agglomerated iron oxide colloids. Both magnetic nanocomposites exhibit similar superparamagnetic behaviors. Whereas nanocomposites obtained via an in situ approach show a strong tendency to aggregate in solution, the encapsulation route allows further surface modification of the magnetic nanocomposites, leading to quaternary gold/iron oxide/silica/gelatine nanoparticles. Hence, such a first-time rational combination of nano-emulsion, nanocrystallization and sol-gel chemistry allows the elaboration of multi-component functional nanomaterials. This constitutes a step forward in the design of more complex bio-nanoplatforms.

Long-term fate of silica nanoparticles interacting with human dermal fibroblasts.

The long-term fate of fluorescent non-porous FITC-SiO(2) nanoparticles of various sizes (10-200 nm) and charge is studied in the presence of human dermal fibroblasts. Particle aggregates are formed in the culture medium and uptaken, at least partially, by macropinocytosis. The smallest particles have a strong impact on cell viability and genotoxic effects can be observed for negatively-charged colloids 10 nm in size. Largest particles do not impact on cellular activity and can be monitored in cellulo via fluorescence and transmission electron microscopy studies over two weeks. These observations reveal a significant decrease in the size of silica particles located in endocytic vesicles. The dissolution process is confirmed by monitoring the cell culture medium that contains both colloidal and soluble silica species. Such dissolution can be explained on the sole basis of silica solubility and has great implication for the use of non-porous silica particles as intra-cellular drug release systems.

Adsorption of alexa-labeled Bt toxin on mica, glass, and hydrophobized glass: study by normal scanning confocal fluorescence.

We studied the kinetics of adsorption of alexa-labeled Bt toxin Cry1Aa, in monomer and oligomer states, on muscovite mica, acid-treated hydrophilic glass, and hydrophobized glass, in the configuration of laminar flow of solution in a slit. Normal confocal fluorescence through the liquid volume allows the visualization of the concentration in solution over the time of adsorption, in addition to the signal due to the adsorbed molecules at the interface. The solution signal is used as calibration for estimation of interfacial concentration. We found low adsorption of the monomer compared to oligomers on the three types of surface. The kinetic adsorption barrier for oligomers increases in the order hydrophobized glass, muscovite mica, acid-treated hydrophilic glass. This suggests enhanced immobilization in soil if toxin is under oligomer state.

Potentialities of silica/alginate nanoparticles as hybrid magnetic carriers.

The possibility to associate traditional bio-organic capsules, such as polymer nanoparticles or liposomes, with silica has been recently demonstrated, opening the route to the design of novel nanocomposites that exhibit promising properties as drug carriers. In this context, we describe here the elaboration of silica/alginate nanoparticles incorporating magnetic iron oxide colloids and fluorescent carboxy-fluoroscein. These nanocomposites were characterized by electron microscopy, X-ray diffraction and magnetic measurements. The release of the fluorophore was investigated in vitro and was demonstrated to occur in 3T3 fibroblast cells. Further grafting of organic moieties on particle surface is also described. These data suggest that hybrid nanoparticles are flexible platforms for the developments of multi-functional bio-capsules.

Design of iron oxide/silica/alginate hybrid magnetic carriers (HYMAC).

A large number of natural and synthetic polymers have already been evaluated for the design of nanomaterials incorporating magnetic nanoparticles for biomedical applications. The possibility to use hybrid (bio)-organic/inorganic nano-carriers have been much less studied. Here we describe the design of Hybrid MAgnetic Carriers (HYMAC) consisting of alginate/silica nanocomposites incorporating magnetite nanoparticles, based on a spray-drying approach. Transmission electron microscopy and X-ray energy dispersive spectrometry confirm the successful incorporation of magnetic colloids within homogeneous hybrid capsules. X-ray diffraction data suggest that surface iron ions are partially desorbed by the spray-drying process, leading to the formation of lepidocrocite and of an iron silicate phase. Magnetic measurements show that the resulting nanocomposites exhibit a superparamagnetic behaviour with a blocking temperature close to 225 K. Comparison with un-silicified capsules indicate that the mineral phase enhances the thermal stability of the polymer network and do not modify of the amount of incorporated iron oxide nanoparticles. Moreover, evaluation of nanocomposite up-take by fibroblasts indicates their possible internalization. A selective intracellular alginate degradation is observed, suggesting that these HYMAC nanomaterials may exhibit interesting properties for the design of drug delivery devices.

Sol-gel chemistry in medicinal science.

The sol-gel process is an inorganic polymerization process taking place in mild conditions, allowing the association of mineral phases with organic or biological systems. The possibility to immobilize drugs, enzymes, antibodies and even whole cells without loss of their biological activity led to the development of diagnostic tools, drug delivery carriers as well as new hosts for artificial organ design. These systems take profit from the wide variety of chemical compositions, dimensions and forms that can be achieved via sol-gel chemistry. Recent advances involve multi-functional "smart" devices combining biocompatibility, biological activity and stimuli-responsive materials. The design of such novel devices with significant added value when compared to current products is probably a key factor when foreseeing industrial developments of sol-gel materials in medicinal science.