Methacrylate Polymers With "Flipped External" Ester Groups: A Review.

Current resin composites have favorable handling and upon polymerization initial physical properties that allow for efficient material replacement of removed carious tooth structure. Dental resin composites have long term durability limitations due to the hydrolysis of ester bonds within the methacrylate based polymer matrix. This article outlines the importance of ester bonds positioned internal to the carbon-carbon double bond in current methacrylate monomers. Water and promiscuous salivary/bacterial esterase activity can initiate ester bond hydrolysis that can sever the polymer backbone throughout the material. Recent studies have custom synthesized, with the latest advances in modern organic chemical synthesis, a novel molecule named ethylene glycol bis (ethyl methacrylate) (EGEMA). EGEMA was designed to retain the reactive acrylate units. Upon intermolecular polymerization of vinyl groups, EGEMA ester groups are positioned outside the backbone of the polymer chain. This review highlights investigation into the degradation resistance of EGEMA using buffer, esterase, and microbial storage assays. Material samples of EGEMA had superior final physical and mechanical properties than traditional ethylene glycol dimethacrylate (EGDMA) in all degradation assays. Integrating bioinformatics-based biodegradation predictions to the experimental results of storage media analyzed by LC/GC-MS revealed that hydrolysis of EGEMA generated small amounts of ethanol while preserving the strength bearing polymer backbone. Prior studies support investigation into additional custom synthesized methacrylate polymers with "flipped external" ester groups. The long term goal is to improve clinical durability compared to current methacrylates while retaining inherent advantages of acrylic based chemistry, which may ease implementation of these novel methacrylates into clinical practice.

Utilizing a degradation prediction pathway system to understand how a novel methacrylate derivative polymer with flipped external ester groups retains physico-mechanical properties following esterase exposure.

OBJECTIVE: The region of failure for current methacrylates (i.e. derivatives of acrylates) are ester bond linkages that hydrolyze in the presence of salivary and bacterial esterases that break the polymer network backbone. This effect decreases the mechanical properties of methacrylate-based materials. METHODS: The ethylene glycol dimethacrylate (EGDMA) or novel ethylene glycol ethyl methacrylate (EGEMA) discs were prepared using 40 µL of the curing mixture containing photo/co-initiators for 40 s in a PTFE mold at 1000 mW/cm2. The degree of conversion was used as a quality control measure for the prepared discs, followed by physical, mechanical, and chemical characterization of discs properties before and after cholesterol esterase treatment. RESULTS: After 9 weeks of standardized cholesterol esterase (CEase) exposure, EGDMA discs showed exponential loss of material (p = 0.0296), strength (p = 0.0014) and increased water sorption (p = 0.0002) compared to EGEMA discs. We integrated a degradation prediction pathway system to LC/MS and GC/MS analyses to elucidate the degradation by-products of both EGEMA and EGDMA polymers. GC/MS analysis demonstrated that the esterase catalysis was directed to central polymer backbone breakage, producing ethylene glycol, for EGDMA, and to side chain breakage, producing ethanol, for EGEMA. The flipped external ester group linkage design is attributed to EGEMA showing higher resistance to esterase biodegradation and changes in mechanical and physical properties than EGDMA. SIGNIFICANCE: EGEMA is a potential substitute for common macromer diluents, such as EGDMA, based on its resistance to biodegradation effects. This work inspires the flipped external group design to be applied to analogs of current larger, hydrophobic strength bearing macromers used in future dental material formulations.

A novel methacrylate derivative polymer that resists bacterial cell-mediated biodegradation.

This study tests biodegradation resistance of a custom synthesized novel ethylene glycol ethyl methacrylate (EGEMA) with ester bond linkages that are external to the central polymer backbone when polymerized. Ethylene glycol dimethacrylate (EGDMA) with internal ester bond linkages and EGEMA discs were prepared in a polytetrafluoroethylene (PTFE) mold using 40 µl macromer and photo/co-initiator mixture cured for 40 s at 1000 mW/cm2 . The discs were stored in the constant presence of Streptococcus mutans (S. mutans) in Todd Hewitt Yeast + Glucose (THYE+G) media up to 9 weeks (n = 8 for each macromer type) and physical/mechanical properties were assessed. Initial measurements EGEMA versus EGDMA polymer discs showed equivalent degree of conversion (45.69% ± 2.38 vs. 46.79% ± 4.64), diametral tensile stress (DTS; 8.12± 2.92 MPa vs. 6.02 ± 1.48 MPa), and low subsurface optical defects (0.41% ± 0.254% vs. 0.11% ± 0.074%). The initial surface wettability (contact angle) was slightly higher (p ≤ .012) for EGEMA (62.02° ± 3.56) than EGDMA (53.86° ± 5.61°). EGDMA showed higher initial Vicker's hardness than EGEMA (8.03 ± 0.88 HV vs. 5.93 ± 0.69 HV; p ≤ .001). After 9 weeks of S. mutans exposure, EGEMA (ΔDTS-1.30 MPa) showed higher resistance to biodegradation effects with a superior DTS than EGDMA (ΔDTS-6.39 MPa) (p = .0039). Visible and scanning electron microscopy images of EGEMA show less surface cracking and defects than EGDMA. EGDMA had higher loss of material (18.9% vs. 8.5%, p = .0009), relative changes to fracture toughness (92.5% vs. 49.2%, p = .0022) and increased water sorption (6.1% vs. 1.9%, p = .0022) compared to EGEMA discs. The flipped external ester group linkage design is attributed to EGEMA showing higher resistance to bacterial degradation effects than an internal ester group linkage design methacrylate.

A Novel Dental Polymer with a Flipped External Ester Group Design that Resists Degradation via Polymer Backbone Preservation.

Current dental sealants with methacrylate based chemistry are prone to hydrolytic degradation. A conventional ethylene glycol dimethacrylate (EGDMA) was compared to a novel methacrylate monomer with a flipped external ester group (ethylene glycol ethyl methacrylate - EGEMA) that was designed to resist polymer degradation effects. Fourier transform infrared spectroscopy and water contact angle confirmed a comparable degree of initial conversion and surface wettability for EGDMA and EGEMA. EGDMA disks initially performed better compared to EGEMA as suggested by higher surface hardness and 1.5 times higher diametral tensile strength (DTS). After 15 weeks of hydrolytic and accelerated aging, EGDMA and EGEMA DTS was reduced by 88% and 44% respectively. This accelerated aging model resulted in 3.3 times higher water sorption for EDGMA than EGEMA disks. EGDMA had an increase in grain boundary defects and visible erosion sites with accelerated aging, while for EGEMA the changes were not significant.

Cell Internalization Studies of Gadofullerene-(ZME-018) Immunoconjugates into A375m Melanoma Cells.

Fullerene (C(60))-monoclonal antibody (mAb) immunoconjugates have been determined to internalize into target cells using water-soluble Gd(3+) ion-filled metallofullerenes (Gd@C(60)[OH](x)). Two separate conjugations of Gd@C(60)(OH)(x) with the antibody ZME-018 and a murine antibody mixture (MuIgG) were performed in a 1:5 mAb/Gd@C(60) ratio. Characterization of the immunoconjugates was established using inductively coupled plasma mass spectrometry (ICP-MS) for Gd(3+) and UV-Vis spectrometry (for Gd@C(60) + C(60)). Once conjugated, enzyme-linked immunosorbent assays showed little change in the specific binding of ZME-018. Each immunoconjugate was exposed to two cancer cell lines, A375m (antigen positive), and T24, bladder carcinoma (antigen negative). Internalization levels of the immunoconjugate were determined at various time points during 24 hours by harvesting and digesting the cells with 70% HNO(3) for Gd(3+) ion analysis by ICP-MS. These results are the first to demonstrate the practicality of a targeted cancer therapy based on fullerene immunotherapy.

Geometrical confinement of gadolinium-based contrast agents in nanoporous particles enhances T1 contrast.

Magnetic resonance imaging contrast agents are currently designed by modifying their structural and physiochemical properties to improve relaxivity and to enhance image contrast. Here, we show a general method for increasing relaxivity by confining contrast agents inside the nanoporous structure of silicon particles. Magnevist, gadofullerenes and gadonanotubes were loaded inside the pores of quasi-hemispherical and discoidal particles. For all combinations of nanoconstructs, a boost in longitudinal proton relaxivity r(1) was observed: Magnevist, r(1) ≈ 14 mM(-1) s(-1)/Gd(3+) ion (∼ 8.15 × 10(+7) mM(-1) s(-1)/construct); gadofullerenes, r(1) ≈ 200 mM(-1) s(-1)/Gd(3+) ion (∼ 7 × 10(+9) mM(-1) s(-1)/construct); gadonanotubes, r(1) ≈ 150 mM(-1) s(-1)/Gd(3+) ion (∼ 2 × 10(+9) mM(-1) s(-1)/construct). These relaxivity values are about 4 to 50 times larger than those of clinically available gadolinium-based agents (∼ 4 mM(-1) s(-1)/Gd(3+) ion). The enhancement in contrast is attributed to the geometrical confinement of the agents, which influences the paramagnetic behaviour of the Gd(3+) ions. Thus, nanoscale confinement offers a new and general strategy for enhancing the contrast of gadolinium-based contrast agents.

White-rot basidiomycete-mediated decomposition of C60 fullerol.

Industrially produced carbon-based nanomaterials (CNM), including fullerenes and nanotubes, will be introduced into the environment in increasing amounts in the next decades. One likely environmental chemical transformation of C60 is oxidation to C60 fullerol through both abiotic- and biotic-mediated means. Unfortunately, knowledge of the environmental fate of oxidized CNM is lacking. This study used bulk and compound-specific 13C stable isotope ratio mass spectrometry techniques and spectroradiometry analysis to examine the ability of two white rot basidiomycete fungi (Phlebia tremellosa and Trametes versicolor) to metabolize and degrade an oxygenated CNM, C60 fullerol. After 32 weeks of decay, both fungi were able to bleach and oxidize fullerol to CO2. Additionally, the fungi incorporated minor amounts of the fullerol carbon into lipid biomass. These findings are significant in that they represent the first report of direct biodegradation and utilization of any fullerene derivative and provide valuable information about the possible environmental fates of other CNM.

Gadofullerene MRI contrast agents.

A promising new class of MRI contrast-enhancing agents with high relaxivities is based on gadolinium-containing metallofullerenes, which are also termed gadofullerenes. Detailed study of the water-proton relaxivity properties and intermolecular nanoclustering behavior of gadofullerene derivatives has revealed valuable information about their relaxivity mechanisms and given a deeper understanding of this new class of paramagnetic contrast agent. Here, the latest findings on water-solubilized gadofullerene materials and how these findings relate to their future applications in MRI are reviewed and discussed.

Gadonanotubes as ultrasensitive pH-smart probes for magnetic resonance imaging.

With their nanoscalar, superparamagnetic Gd(3+)-ion clusters (1 x 5 nm) confined within ultrashort (20-80 nm) single-walled carbon nanotube capsules, gadonanotubes are high-performance T1-weighted contrast agents for magnetic resonance imaging (MRI). At 1.5 T, 37 degrees C, and pH 6.5, the r1 relaxivity (ca. 180 mM(-1) s(-1) per Gd(3+) ion) of gadonanotubes is 40 times greater than any current Gd(3+) ion-based clinical agent. Herein, we report that gadonanotubes are also ultrasensitive pH-smart probes with their r1/pH response from pH 7.0-7.4 being an order of magnitude greater than for any other MR contrast agent. This result suggests that gadonanotubes might be excellent candidates for the development of clinical agents for the early detection of cancer where the extracellular pH of tumors can drop to pH=7 or below. In the present study, gadonanotubes have also been shown to maintain their integrity when challenged ex vivo by phosphate-buffered saline solution, serum, heat, and pH cycling.

Gadofullerenes as nanoscale magnetic labels for cellular MRI.

In this study, anionic gadofullerene {Gd@C60[C(COOH)2](10)} was used as an in vitro cellular magnetic resonance imaging label. The cellular uptake characteristics of this gadofullerene were significant and nonspecific, and excellent labeling efficiency (98-100%) was achieved without a transfecting agent. The average uptake was up to 133.6 +/- 5.5 pg Gd per cell or 10(11) Gd3+ ions per cell. The difference in the longitudinal relaxation time T(1) between labeled and unlabeled cells generated good contrast between labeled and unlabeled cells. A clinical magnetic resonance imaging imager at 1.5 T showed that signal intensity on the T(1) weighted magnetic resonance images was 250% greater in labeled cells. Thus, the anionic gadofullerene {Gd@C60[C(COOH)2](10)} is an attractive candidate for ex vivo labeling and noninvasive in vivo tracking of any mammalian cell via magnetic resonance imaging.

Trifluoromethyl derivatives of insoluble small-HOMO-LUMO-gap hollow higher fullerenes. NMR and DFT structure elucidation of C2-(C74-D3h)(CF3)12, Cs-(C76-Td(2))(CF3)12, C2-(C78-D3h(5))(CF3)12, Cs-(C80-C2v(5))(CF3)12, and C2-(C82-C2(5))(CF3)12.

Reaction of a mixture of insoluble higher fullerenes with CF3I at 500 degrees C produced a single abundant isomer of C74(CF3)12, C76(CF3)12, and C80(CF3)12, two abundant isomers of C78(CF3)12 and C82(CF3)12, and an indeterminant number of isomers of C84(CF3)12. Using a combination of 19F NMR spectroscopy, DFT calculations, and the structures and spectra of previously reported fullerene(CF3)n compounds, the most-probable structures of six of the seven isolated compounds were determined to be specific isomers of C2-(C74-D3h)(CF3)12, Cs-(C76-Td(2))(CF3)12), C2-(C78-D3h(5))(CF3)12), Cs-(C80-C2v(5))(CF3)12), C2-(C82-C2(5))(CF3)12), and C2-(C82-C2(3))(CF3)12) containing ribbons and/or loops of edge-sharing para-C6(CF3)2 hexagons. The seventh isolated compound is a C1 isomer of C78(CF3)12 containing two such ribbons. This set of compounds represents only the second reported isolable compound with the hollow C74-D3h cage and the first experimental evidence for the existence of the hollow fullerenes C76-Td(2), C78-D3h(5), C80-C2v(5), and C82-C2(5) in arc-discharge soots.

Destroying gadofullerene aggregates by salt addition in aqueous solution of Gd@C(60)(OH)(x) and Gd@C(60)[C(COOH(2))](10).

A combined proton relaxivity and dynamic light scattering study has shown that aggregates formed in aqueous solution of water-soluble gadofullerenes can be disrupted by addition of salts. The salt content of fullerene-based materials will strongly influence properties related to aggregation phenomena, therefore, their behavior in biological or medical applications. In particular, the relaxivity of gadofullerenes decreases dramatically with phosphate addition. Moreover, real biological fluids present a rather high salt concentration which will have consequences on fullerene aggregation and influence fullerene-based drug delivery.

Water-soluble gadofullerenes: toward high-relaxivity, pH-responsive MRI contrast agents.

The water-soluble endohedral gadofullerene derivatives, Gd@C(60)(OH)(x) and Gd@C(60)[C(COOH)(2)](10), have been characterized with regard to their MRI contrast agent properties. Water-proton relaxivities have been measured in aqueous solution at variable temperature (278-335 K), and for the first time for gadofullerenes, relaxivities as a function of magnetic field (5 x 10(-4) to 9.4 T; NMRD profiles) are also reported. Both compounds show relaxivity maxima at high magnetic fields (30-60 MHz) with a maximum relaxivity of 10.4 mM(-1) s(-1) for Gd@C(60)[C(COOH)(2)](10) and 38.5 mM(-1) s(-1) for Gd@C(60)(OH)(x) at 299 K. Variable-temperature, transverse and longitudinal (17)O relaxation rates, and chemical shifts have been measured at three magnetic fields (B = 1.41, 4.7, and 9.4 T), and the results point exclusively to an outer sphere relaxation mechanism. The NMRD profiles have been analyzed in terms of slow rotational motion with a long rotational correlation time calculated to be tau(R)(298) = 2.6 ns. The proton exchange rate obtained for Gd@C(60)[C(COOH)(2)](10) is k(ex)(298) = 1.4 x 10(7) s(-1) which is consistent with the exchange rate previously determined for malonic acid. The proton relaxivities for both gadofullerene derivatives increase strongly with decreasing pH (pH: 3-12). This behavior results from a pH-dependent aggregation of Gd@C(60)(OH)(x) and Gd@C(60)[C(COOH)(2)](10), which has been characterized by dynamic light scattering measurements. The pH dependency of the proton relaxivities makes these gadofullerene derivatives prime candidates for pH-responsive MRI contrast agent applications.

Chemical oxidation of endohedral metallofullerenes: identification and separation of distinct classes.

Chemical oxidation is useful for solubilizing and separating endohedral metallofullerenes, as demonstrated here by a separation of three categories of Gd@C2n species and by the solubilization of Tm@C60+ and Tm@C70+ for the first time.

First soluble M@C60 derivatives provide enhanced access to metallofullerenes and permit in vivo evaluation of Gd@C60[C(COOH)2]10 as a MRI contrast agent.

M@C(60) and related endohedral metallofullerenes comprise a significant portion of the metallofullerene yield in the traditional arc synthesis, but their chemistry and potential applications have been largely overlooked because of their sparse solubility. In this work, procedures are described to solublize Gd@C(60) species for the first time by forming the derivative, Gd@C(60)[C(COOCH(2)CH(3))(2)](10), and its hydrolyzed water-soluble form, Gd@C(60)[C(COOH)(2)](10). Imparting water solubility to Gd@C(60) permits its evaluation as a magnetic resonance imaging (MRI) contrast agent. Relaxometry measurements for Gd@C(60)[C(COOH)(2)](10) reveal it to possess a relaxivity (4.6 mM(-1) s(-1) at 20 MHz and 40 degrees C) comparable to that of commercially available Gd(III) chelate-based MRI agents. An in vivo MRI biodistribution study in a rodent model reveals Gd@C(60)[C(COOH)(2)](10) to possess the first non-reticuloendothelial system (RES) localizing behavior for a water-soluble endohedral metallofullerene species, consistent with its lack of intermolecular aggregation in solution as determined by light-scattering measurements. This first derivatization and use of a M@C(60) species suggests new potential for metallofullerene technologies by reducing reliance on the chromatographic purification procedures normally employed for the far less abundant M@C(82) and related endohedrals. The recognition that water-soluble fullerene derivatives can be designed to avoid high levels of RES uptake is an important step toward fullerene-based pharmaceutical development.