Coumarin/ß-Cyclodextrin Inclusion Complexes Promote Acceleration and Improvement of Wound Healing.

Coumarins have great pharmacotherapeutic potential, presenting several biological and pharmaceutical applications, like antibiotic, fungicidal, anti-inflammatory, anticancer, anti-HIV, and healing activities, among others. These molecules are practically insoluble in water, and for biological applications, it became necessary to complex them with cyclodextrins (CDs), which influence their bioavailability in the target organism. In this work, we studied two coumarins, and it was possible to conclude that there were structural differences between 4,7-dimethyl-2H-chromen-2-one (DMC) and 7-methoxy-4-methyl-2H-chromen-2-one (MMC)/ß-CD that were solubilized in ethanol, frozen, and lyophilized (FL) and the mechanical mixtures (MM). In addition, the inclusion complex formation improved the solubility of DMC and MMC in an aqueous medium. According to the data, the inclusion complexes were formed and are more stable at a molar ratio of 2:1 coumarin/ß-CD, and hydrogen bonds along with π-π stacking interactions are responsible for the better stability, especially for (MMC)2@ß-CD. In vivo wound healing studies in mice showed faster re-epithelialization and the best deposition of collagen with the (DMC)2@ß-CD (FL) and (MMC)2@ß-CD (FL) inclusion complexes, demonstrating clearly that they have potential in wound repair. Therefore, (DMC)2@ß-CD (FL) deserves great attention because it presented excellent results, reducing the granulation tissue and mast cell density and improving collagen remodeling. Finally, the protein binding studies suggested that the anti-inflammatory activities might exert their biological function through the inhibition of MEK, providing the possibility of development of new MEK inhibitors.

Magnetic solid-phase extraction based on restricted-access molecularly imprinted polymers for ultrarapid determination of ractopamine residues from food samples by capillary electrophoresis.

An ultrafast, efficient, and eco-friendly method combining magnetic solid phase extraction and capillary electrophoresis with diode array detection have been developed to determine ractopamine residues in food samples. A restricted access material based on magnetic and mesoporous molecularly imprinted polymer has been properly synthesized and characterized, demonstrating excellent selectivity and high adsorbent capacity. Short-end injection capillary electrophoresis method was optimized: 75 mM triethylamine pH 7 as BGE, -20 kV, 50 mbar by hydrodynamic injection during 8 s, and capillary temperature at 25 °C; reaching ultrafast ractopamine analysis (∼0.6 min) with good peak asymmetry, and free from interfering and/or baseline noise. After sample preparation optimization, the conditions were: 1000 µL of sample at pH 6, 20 mg of adsorbent, stirring time of 120 s, 250 µL of ultrapure water as washing solvent, 1000 µL of methanol: acetic acid (7: 3, v/v) as eluent, and the adsorbent can be reused four times. In these conditions, the analytical method showed recoveries around to 100 %, linearity ranged from 9.74 to 974.0 µg kg-1, correlation coefficient (r) ≥ 0,99 in addition to adequate precision, accuracy, and robustness. After proper validation, the method was successfully applied in the analysis ractopamine residues in bovine milk and bovine and porcine muscle.

Magnetic and mesoporous molecularly imprinted polymer synthesized by rational computation design: Sample preparation and analysis of ractopamine.

Through density functional theory calculations was studied theoretically the formation process of a magnetic and mesoporous molecularly imprinted polymer for ractopamine (RAC), evaluating the molecular electrostatic potential map, functional monomers, functional monomer / template stoichiometry and crosslink agents. The results revealed that the best conditions for the synthesis were established with acrylic acid as functional monomer in a 1: 4 stoichiometry using acetonitrile as the solvent and ethylene glycol dimethacrylate as crosslink agent. It was observed that nine hydrogen bonds established between the RAC and acrylic acid play a key role on the pre-polymerization complex. In addition, three analytical methods using HPLC, UHPLC and CE instruments were optimized for rapid analysis. The adsorbent was experimentally synthesized considering the best conditions found at the molecular level and characterized by FTIR, DRX, TGA, SEM, TEM, surface analysis, and wettability. After that, the synthesized material was used in magnetic solid phase extraction combined with capillary electrophoresis in a preliminary RAC recovery study from milk samples. Finally, greenness metric with a score of 0.55 have been obtained for the sample preparation procedure using the online AGREEprep metric.

Restricted access polypyrrole employed in pipette-tip solid-phase extraction for determination of nimodipine and nicardipine in breast milk.

A HPLC-UV method for the determination of nimodipine and nicardipine in breast milk using restricted access polypyrrole as an adsorbent in pipette-tip solid-phase extraction (PT-SPE) has been developed. The chromatographic conditions were a C18 column (150 mm × 4.60 mm, 5 µm) using methanol : acetonitrile : ultrapure water (55 : 30 : 15, v/v/v) at a flow rate of 1.0 mL min-1 and detection at 236 nm. The adsorbents have been synthesized and characterized by using Fourier-transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, surface analysis, wettability and point zero charge, and were then applied in sample preparation. The main parameters that affect analyte recovery from breast milk by PT-SPE were optimized and the analytical method showed recoveries around 100%, linearity from 3 to 3000 ng mL-1, and correlation coefficients (r) ≥ 0.99 for the two analytes, in addition to adequate precision, accuracy and robustness. Finally, the validated method has been successfully applied in analyses of breast milk from volunteers.

Short-End Injection Capillary Electrophoresis and Multivariate Analysis for Simultaneous Determination of Heavy Metals in Passiflora incarnata Tea.

An ultra-fast method for the simultaneous determination of heavy metals in Passiflora incarnata tea by capillary electrophoresis (CE) using a short-end injection combined with multivariate analysis was proposed. Separation was conducted by hydrodynamic injection (5 s at 0.5 psi) using the short-end injection procedure in a fused uncoated silica capillary (50 cm total length, 10.2 cm effective length, 50 µm i.d.) with separation time less than 2 min. An indirect UV detection at 214 nm was employed by using imidazole as a chromophore. The buffer used was 6 mmol/L hydroxybutyric acid (HIBA). The optimum conditions by full factorial with a central point were achieved by 18-crown-6 concentration (23.3 mmol L−1), voltage (+11.4 kV), methanol concentration (3.8%), and temperature (20 °C). The method showed good linearity (R2 > 0.998) for both Cd and Pb, inter-day precision of less than 14.49%, and an adequate limit of quantification only for Cd (LOQ < 0.5 µg mL−1 for Cd) based on the US Pharmacopeial Convention limit requirements for elemental impurities. After method validation, the method was applied to Passiflora incarnata tea samples from a local market. Furthermore, the developed method showed great potential for the determination of metals in other samples with proper sample preparation procedures.

Restricted double access mesoporous polypyrrole as adsorbent in pipette-tip solid phase extraction for simultaneous determination of progesterone, pyriproxyfen, and deltamethrin in chicken eggs.

In this study, two sample preparation techniques were evaluated in the simultaneous determination of three compounds with different physicochemical properties, progesterone, pyriproxyfen, and deltamethrin that may be present in the chicken egg. In this procedure, firstly the restricted double access mesoporous polypyrrole was synthesized, which was evaluated as adsorbent in pipette-tip solid phase extraction and dispersive solid phase extraction. After optimizing the extraction parameters, it was found that pipette-tip solid phase extraction was more efficient and, therefore, it was used in the validation and application of the method. The analytical method showed good recoveries, acceptable linearity (r > 0.99), limits of quantification, precision and accuracy, robustness and stability within the limits of the literature. Finally, the developed method was successfully applied in simultaneous determination of analytes in different chicken egg samples. Therefore, this work provided a promising strategy for the extraction of different organic compounds from egg products.

Development and validation of analytical methods by HPLC for quality control of avermectins and milbemycins in bulk samples

This work aims to develop analytical methods using high-performance liquid chromatography with a diode array detector (HPLC-DAD) for analysis and quantification of avermectins (AVMs) and milbemycins (MBMs) in bulk samples. First, the methods were optimized and some parameters such as temperature, flow rate, injection volume and mobile phase with different proportions of solvents were evaluated. The best chromatographic conditions were obtained using the Phenomenex® C18 (150 × 4.60 mm, 5 µm) column at a temperature of 20 °C, flow rate of 1.2 mL min-1, injection volume of 20 µL, and detection at 250 nm. Acetonitrile: ultrapure water (87: 13, v/v) was used as mobile phase for moxidectin and eprinomectin, and acetonitrile: methanol: ultrapure water (53: 35: 12, v/v/v) for abamectin and ivermectin. Under these conditions satisfactory results were obtained, with appropriate limits of detection and quantification, acceptable linearity, precision, accuracy, and robustness. These methods satisfy the need for analytical methods for the multi-determination of MBMs and the B1a and B1b forms of AVMs by HPLC-DAD, which can be considered simple, effective, innovative and should aid in the development of the fiel

Molecularly imprinted polymers as a selective sorbent for forensic applications in biological samples-a review.

Molecularly imprinted polymers (MIP) consist of a molecular recognition technology with applicability in different areas, including forensic chemistry. Among the forensic applications, the use of MIP in biological fluid analysis has gained prominence. Biological fluids are complex samples that generally require a pre-treatment to eliminate interfering agents to improve the results of the analyses. In this review, we address the development of this molecular imprinting technology over the years, highlighting the forensic applications of molecularly imprinted polymers in biological sample preparation for analysis of stimulant drugs such as cocaine, amphetamines, and nicotine.

Chiral Capillary Electrokinetic Chromatography: Principle and Applications, Detection and Identification, Design of Experiment, and Exploration of Chiral Recognition Using Molecular Modeling.

This work reviews the literature of chiral capillary electrokinetic chromatography from January 2016 to March 2021. This is done to explore the state-of-the-art approach and recent developments carried out in this field. The separation principle of the technique is described and supported with simple graphical illustrations, showing migration under normal and reversed polarity modes of the separation voltage. The most relevant applications of the technique for enantioseparation of drugs and other enantiomeric molecules in different fields using chiral selectors in single, dual, or multiple systems are highlighted. Measures to improve the detection sensitivity of chiral capillary electrokinetic chromatography with UV detector are discussed, and the alternative aspects are explored, besides special emphases to hyphenation compatibility to mass spectrometry. Partial filling and counter migration techniques are described. Indirect identification of the separated enantiomers and the determination of enantiomeric migration order are mentioned. The application of Quality by Design principles to facilitate method development, optimization, and validation is presented. The elucidation and explanation of chiral recognition in molecular bases are discussed with special focus on the role of molecular modeling.

Factors associated with the occurrence of adverse events to antiretroviral therapy in adults and elderly living with HIV

Objectives: This study identifies the factors associated with the occurrence of adverse events in adults and elderly on antiretroviral therapy. Methods: This is a cross-sectional study carried out with adults and elderly patients, attended by the Specialized Assistance Service between September 2016 and August 2017. Adverse events were measured through self-reports collected in interviews, information collected in medical records, and changes identified in laboratory tests, with the degree of causality being assessed using the Naranjo Algorithm. Univariate analysis, with results expressed as odds ratio (OR) and their respective confidence intervals (CI 95%), was performed to estimate the association between sociodemographic, pharmacotherapeutic, and clinical characteristics (explanatory variables) with the occurrence of four or more adverse events to antiretroviral therapy (response variable). For multivariate analysis, multiple logistic regression was considered in order to verify the permanence or absence of associations previously found in the univariate analysis. Results: Prevalence of adverse events to antiretroviral therapy was 92.6%, with the median of adverse events being four (IQR 25%: 2 ; IQR 75%: 5) and two (IQR 25%: 2 ; IQR 75%: 4), respectively, among adults and elderly (p <0.05). Additionally, 340 adverse events were identified, among which nightmares (15.0%) and vertigo (13.5%) were the most frequent. Most of the adverse events identified were classified as possible (96.2% / n = 327). In the initial univariate analysis, factors such receipt of guidance on adverse events and age were associated with a higher occurrence of adverse events to antiretroviral therapy. Contrary to expectations, the elderly were considered less susceptible to have adverse events when compared to adults (OR = 0.363; CI 95% = 0.164-0.801). However, the final multivariate analysis model revealed "receipt of guidance on adverse events" as the only variable significantly associated with the presence of four or more adverse events to antiretroviral therapy (OR = 4.183 ; CI 95% = 1.775-9.855). Conclusions: Results suggest difference in perception of adverse events between patients who received and those who did not receive guidance in this regard, which indicates the importance of health professionals to provide specific information to their patients regarding adverse events to antiretroviral therapy. Thus the patient can understand the effects generated by the treatment and inform these professionals for the notification of adverse events, in order to improve pharmacovigilance actions and promote patient safety.

Mesoporous molecularly imprinted polymer core@shell hybrid silica nanoparticles as adsorbent in microextraction by packed sorbent for multiresidue determination of pesticides in apple juice.

In this work, we report the synthesis of a mesoporous molecularly imprinted polymer on the surface of silica nanoparticles (core@mMIP) to be applied as adsorbent in microextraction by packed sorbent (MEPS) for selective determination of pesticides in apple juice. The core@mMIP was properly characterized, showing good adhesion of the polymer to the silica core. The best extraction conditions were: 200 µL of ultrapure water as washing solvent, 150 µL of acetonitrile as eluent, 100 µL of sample at pH 2.5, five draw-eject cycles and 8 mg of adsorbent. Thereby, recoveries of 96.12 ± 1.05%, 76.88 ± 6.18% and 76.18 ± 5.57% were obtained for pyriproxyfen (PPX), deltamethrin (DTM) and etofenprox (ETF), respectively. After validation, the method presented linearity in the range of 0.02-10 µg mL-1 (r > 0.99), limit of detection of 0.005 µg mL-1, satisfactory selectivity, and proper precision and accuracy. The method was successfully applied real samples of processed and fresh apple juice.

Magnetic molecularly imprinted conducting polymer for determination of praziquantel enantiomers in milk.

A new selective adsorbent based on magnetic molecularly imprinted conducting polymer was firstly synthetized and applied to the magnetic solid phase extraction (MSPE) for the determination of PZQ enantiomers in milk samples. The enantioselective separation was performed on a Chiralpak® IB column using mobile phase composed of ultrapure water : tetrahydrofuran : diethylamine (65 : 35 : 0.05, v/v/v). After MSPE optimization, in which a magnetic molecularly imprinted polypyrrole (MMIPPy) was used as adsorbent, the best conditions were: 500 µL of acetonitrile as eluent, 75 mg of MMPPy, 1000 µL of milk sample (pH adjusted to 6.5.). The analyses showed recoveries/relative standard deviation (RSD%) 79.7 ± 2.5 and 81.1 ± 2.2 for (R)-(-)-PZQ and (S)-(+)-PZQ, respectively. By computational study carried out on the molecular design of the synthesized MMIPPy, it was found that the formation of four hydrogen bonds and one π-π stacking interaction explain the formation of the PZQ-pyrrole pre-polymerization complex at the molecular level. From the analytical validation, the developed method showed to be linear in the concentration range of 0.01 to 10 µg mL-1, with correlation coefficient larger than 0.98 and RSD% values below 15%. The LOQ obtained was 0.01 µg mL-1 for both enantiomers, with RSD% and relative error below 20%. The method was successfully applied in real sheep milk samples from various local suppliers. Finally, the results showed that MMIPPy in MSPE is an economical, simple and easy-to-perform technique.

Fiber spray ionization mass spectrometry in forensic chemistry: A screening of drugs of abuse and direct determination of cocaine in urine.

RATIONALE: Ambient mass spectrometry techniques are much required in forensic chemistry to evaluate evidence with low analytical interference, high confidence, and accuracy. However, traditional methodologies, such as paper spray ionization, have been shown to present low sensitivity in the analysis of illicit drugs from biological matrices. METHODS: Fiber spray ionization mass spectrometry (FSI-MS) was developed using a capillary polypropylene (PP) hollow fiber. Seized samples of drugs, i.e. a tablet, blotter paper, hashish, and cocaine powder, were analyzed. Cocaine was quantified from whole urine by dipping the fiber directly into solution. FSI-MS was tested for the analysis of a sample of urine obtained from a drug abuse suspect. RESULTS: The FSI(+) analysis showed the detection of different types of synthetic drugs in tablet and blotter paper samples, e.g. amphetamine, cathinones, phenethylamines, and opioids, while pure cocaine and different types of coca alkaloids were identified from cocaine powder with good sensitivity and high mass accuracy. The hashish analysis by FSI(-) revealed signals of cannabinoids, cannabinoid acids, and cannabinoid derivatives, detected mainly as [M - H]- ions or chlorine adducts [M + Cl]- . The quantification of cocaine in whole urine showed good sensitivity and precision with limits of detection and quantification of 5.16 and 17.21 ng/mL, respectively, linearity above 0.999, and relative standard deviation below 2.71%. The evaluation of seized sample of urine showed the detection of cocaine with relative ion intensity greater than 36%, as well as the metabolites benzoylecgonine and cocaethylene with a relative intensity of 1.4% and 6%, respectively. CONCLUSIONS: The developed FSI-MS method has the potential to be applied to forensic sample evaluation as well as to determine illicit drugs from biological matrices in toxicological analysis. The use of a capillary PP fiber has advantages as an extractor agent and ionizing substrate, and also the feature of it being dipped directly into the sample, thus preserving the integrity of the sample, which makes this a very promising ambient mass spectrometry method and relevant to forensic chemistry.

Elucidation of the chromatographic enantiomer elution order for praziquantel: An experimental and theoretical assessment.

In this work, we have studied both experimentally and theoretically the praziquantel (PZQ) chiral discrimination. According to the main results, the enantioseparation of PZQ was efficiently optimized by HPLC on the reverse phase from the Chiralpak IB column, which has cellulose tris (3,5-dimethylphenylcarbamate) (CDMPC) as a chiral selector. The thermodynamic and structural parameters obtained via density functional theory (DFT) calculations pointed out the chiral discrimination as well as the enantiomeric elution order of PZQ, thus elucidating the experimental data and validating our proposed method. Finally, the hydrogen bonds and π-π stacking interactions played a key role in the discrimination between the PZQ diastereomeric complexes formed.

Novel [6]-gingerol Triazole Derivatives and their Antiproliferative Potential against Tumor Cells.

BACKGROUND: Effective cancer treatment is a major public health challenge. The limitations of current therapies and their adverse effects reduce the efficacy of treatment, leading to significant mortality rates worldwide. Moreover, natural product chemistry occupies a prominent role in the search for new treatment alternatives, by contributing a spectrum of chemical structures that may potentially yield new bioactive compounds. The compound [6]-gingerol (1) is the main active substance in ginger (Zingiber officinale) and several studies have shown it to produce beneficial effects, including antitumor activity. OBJECTIVE: This work aims to obtain new gingerol derivatives with cytotoxic activity. METHODS: [6]-gingerol was isolated and its derivatives were produced using click chemistry, obtaining eight new compounds. All chemical structures were determined by means of IR, NMR and HRMS data, and cytotoxicity was evaluated in the HCT 116 (colon carcinoma) and MCF-7 (breast carcinoma) cell lines at concentrations of 5 µmol L-1 and 50 µmol L-1. RESULTS: At 50 µmol L-1, more than 70% inhibition of cell growth was achieved with compounds 2e, 2g against HCT 116, and 2b, 2d, 2e, 2f and 2g against MCF-7. CONCLUSION: The obtained compounds showed only moderate cytotoxic activity. However, the products with substituents occupying the meta position in relation to the triazole ring showed increased cytotoxic properties. The brominated compound (2g) showed the strongest activity, inhibiting cell proliferation by 87%.

Synthesis of mesoporous magnetic polypyrrole and its application in studies of removal of acidic, neutral, and basic pharmaceuticals from aqueous medium.

As an alternative to traditional adsorbents, mesoporous magnetic polypyrrole (MMPPy) was first used as an adsorbent for the removal of acid, neutral, and basic pharmaceutical compounds considered aqueous pollutants. Ibuprofen (IBU, acid), caffeine (CAF, neutral), and bupropion (BUP, basic) were chosen as adsorbates and applied in adsorption studies. They proved to be pH dependent of the aqueous solution and the best results were found at pH 4 for IBU and CAF and pH 7 for BUP and 60 mg was the optimal amount of adsorbent to be used in the studies. Adsorption was extremely fast and the equilibrium was reached up to 180 s. The adsorption data of all analytes could be well interpreted by the pseudo second-order kinetic model and the dual-site Langmuir-Freundlich isotherm model. The adsorption capacities obtained by the dual-site Langmuir-Freundlich model were 53.67 mg g-1, 16.74 mg g-1, and 24.72 mg g-1 for IBU, CAF, and BUP, respectively. Thermodynamic parameters revealed that IBU adsorption becomes spontaneous as temperature increases and CAF and BUP adsorption occurs through a non-spontaneous process. In addition, this study shows endothermic nature of the adsorption process. Analytes were desorbed using an aqueous solution at pH 10 for IBU, pH 7 for CAF, and pH 4 for BUP and then the material was regenerated successfully. The results suggest that MMPPy can be efficiently used in the removal of different organic analytes found in contaminated water.

Development and validation of an experimental and theoretical method for the chiral discrimination of dinotefuran.

Dinotefuran is a low-cost agrochemical considered a highly toxic product. In this sense, there is a need for its constant environmental, biological, and food control, aiming to ensure its use to humans as well as to preserve biodiversity and ecosystems. In the present work, we developed an experimental and theoretical method for dinotefuran chiral discrimination. According to the main results, the dinotefuran enantioselective separation was efficiently optimized by high-performance liquid chromatography evaluating the influence of different percentage compositions in the mobile phase to improve the resolution of the peaks in the chromatogram. The novelty of this work was the proposition of a reduced molecular model for the chiral selector amylose-Tris-(3,5-dimethylphenylcarbamate) polysaccharide that was able to adequately describe at the molecular level its interaction with the dinotefuran enantiomers. Besides, the thermodynamic and structural parameters obtained via density functional theory calculations pointed out the chiral discrimination as well as the enantiomeric elution order of the analyte studied, confirming the experimental data, thus validating our proposed method. Finally, hydrogen bonds and repulsive interactions played a key role in the discrimination between the diastereomeric complexes, and consequently, for the dinotefuran enantioselective separation.

Assessment of the Performance of Solid Phase Extraction Based on Pipette Tip Employing a Hybrid Molecularly Imprinted Polymer as an Adsorbent for Enantioselective Determination of Albendazole Sulfoxide.

Herein, an organic-inorganic hybrid molecularly imprinted polymer (MIP) was successfully synthesized with albendazole sulfoxide (ABZSO) as a template and 3-(trimethoxysilyl)propyl methacrylate, a bifunctional group compound, as a single cross-linking agent. In this study, a simple method using HPLC-DAD was developed for the determination of ABZSO enantiomers in human urine using pipette tip-based molecularly imprinted polymer solid phase extraction (PT-MIP-SPE). Enantioseparation with satisfactory retention times (5.17 and 7.09 min), acceptable theoretical plates (N = 4,535 and 5,091) and strong resolution (Rs = 5.45) was performed with an Agilent® Eclipse Plus C18 (100 mm × 4.6 mm, 3.5 µm) coupled with a Chiralpak® IA column (100 mm × 4.6 mm, 3 µm), a mixture with ethanol:water (50:50, v/v) as the mobile phase, temperature at 40°C, flow rate at 0.9 mL min-1 and λ = 230 nm. Thereafter, certain parameters affecting the PT-MIP-SPE were investigated in detail and the better conditions were: 300 µL of water as washing solvent, 500 µL of ethanol:acetic acid (9:1, v/v) as eluting solvent, 20 mg of MIP, 500 µL of human urine at pH 9 and no addition of NaCl. Recoveries/relative standard deviation (RSD%) for (R)-(+)-ABZSO and (S)-(-)-ABZSO were 78.2 ± 0.2% and 69.7 ± 1.7%, respectively.

Evaluation of physicochemical properties as supporting information on quality control of raw materials and veterinary pharmaceutical formulations.

This study aimed to show that the physicochemical proprieties obtained by Fourier transform infrared spectroscopy (FTIR), thermogravimetry (TG), and scanning electronic microscopy (SEM) can be useful tools for evaluating the quality of active pharmaceutical ingredients (APIs) and pharmaceutical products. In addition, a simple, sensitive, and efficient method employing HPLC-DAD was developed for simultaneous determination of lidocaine (LID), ciprofloxacin (CFX) and enrofloxacin (EFX) in raw materials and in veterinary pharmaceutical formulations. Compounds were separated using a Gemini C18 (250 mm × 4.6 mm, 5 µm) Phenomenex® column, at a temperature of 25 °C, with a mobile phase containing 10 mM of phosphoric acid (pH 3.29): acetonitrile (85.7:14.3, v/v) and a flow rate of 1.5 mL/min. Physicochemical characterization by TG, FTIR, and SEM of raw materials of LID, CFX, and EFX provided information useful for the evaluation, differentiation, and qualification of raw materials. Finally, the HPLC method was proved to be useful for evaluation of raw material and finished products, besides satisfying the need for an analytical method that allows simultaneous determination of EFX, CFX, and LID, which can also be extended to other matrices and applications.

Hollow mesoporous structured molecularly imprinted polymer as adsorbent in pipette-tip solid-phase extraction for the determination of antiretrovirals from plasma of HIV-infected patients.

In this work a hollow mesoporous structured molecularly imprinted polymer was synthetized and used as adsorbent in pipette-tip solid-phase extraction for the determination of lamivudine (3TC), zidovudine (AZT) and efavirenz (EFZ) from plasma of human immunodeficiency virus (HIV) infected patients by high-performance liquid chromatography (HPLC). All parameters that influence the recovery of the pipette tip based on hollow mesoporous molecularly imprinted polymer solid-phase extraction (PT-HM-MIP-SPE) method were systematically studied and discussed in detail. The adsorbent material was prepared using methacrylic acid and 4-vinylpyridine as functional monomers, ethylene glycol dimethacrylate as crosslinker, acetonitrile as solvent, 4,4'-azobis(4-cyanovaleric acid) as radical initiator, benzalkonium chloride as surfactant, 3TC, and AZT as templates. The simultaneous separation of 3TC, AZT and EFZ by HPLC-UV was performed using a Gemini C18 Phenomenex® column (250 mm × 4.6 mm, 5 µm) and mobile phase consisting of acetonitrile: water pH 3.2 (68:32, v/v), flow rate of 1.0 mL/min and λ = 260 nm. The method was linear over the concentration range from 0.25 to 10 µg/mL for 3TC and EFZ, and 0.05 to 2.0 µg mL-1 for AZT, with correlation coefficients larger than 0.99 for all analytes. Recovery ± relative standard deviations (RSDs %) were 41.99 ± 2.38%, 82.29 ± 1.63%, and 83.72 ± 7.52% for 3TC, AZT, and EFZ, respectively. The RSDs and relative errors (REs) were lower than 15% for intra and interday assays. The method has been successfully applied for monitoring HIV-infected patients outside the therapeutic dosage.