RESUMEN
The mesoporous SBA-15 material was surface-functionalized with amino and carboxylic acid groups and used as a platform to investigate the interaction of these chemical groups with tetracycline, kanamycin, and ampicillin antibiotics. The interactions between the antibiotic and the functionalized surfaces were characterized using two-dimensional 1H-13C HETCOR CP MAS and FTIR spectroscopy and indicated that -COO- NH3 + bondings had been formed between chemical groups on the silica surface and drug molecules. The surface modification resulted in higher kanamycin and ampicillin loadings and a slow-release rate, and all synthesized systems showed antibacterial activity against susceptible Escherichia coli bacteria. Almost total death of bacteria was obtained using a few ppm of tetracycline- and kanamycin-loaded systems, whereas the ampicillin-loaded one showed lower bactericidal activity than free ampicillin.
RESUMEN
The development of green and sustainable materials for use as heterogeneous catalysts is a growing area of research in chemistry. In this paper, mesoporous SiO2-Al2O3 mixed oxide catalysts with different Si/Al ratios were prepared via hydrolytic (HSG) and nonhydrolytic sol-gel (NHSG) processes. The HSG route was explored in acidic and basic media, while NHSG was investigated in the presence of diisopropylether as an oxygen donor. The obtained materials were characterized using EDX, N2-physisorption, powder XRD, 29Si, 27Al MAS-NMR, and NH3-TPD. This approach offered good control of composition and the Si/Al ratio was found to influence both the texture and the acidity of the mesoporous materials. According to 27Al and 29Si MAS NMR analyses, silicon and aluminum were more regularly distributed in NHSG samples that were also more acidic. Silica-alumina catalysts prepared via NHSG were more active in esterification of acetic acid with n-BuOH.
Asunto(s)
Óxido de Aluminio , Dióxido de Silicio , Óxido de Aluminio/química , Catálisis , Esterificación , Geles/química , Óxidos , Dióxido de Silicio/químicaRESUMEN
The outreach of nanoparticle-based medical treatments has been severely hampered due to the imbalance between the efforts in designing extremely complex materials and the general lack of studies devoted to understanding their colloidal stability in biological environments. Over the years, the scientific community has neglected the relevance related to the nanoparticles' colloidal state, which consequently resulted in very poor bench-to-clinic translation. In this work, we show how mesoporous silica nanoparticles (MSNs, one of the most promising and tested drug delivery platforms) can be efficiently synthesized and prepared, resulting in a colloidally stable system. We first compared three distinct methods of template removal of MSNs and evaluated their ultimate colloidal stability. Then, we also proposed a simple way to prevent aggregation during the drying step by adsorbing BSA onto MSNs. The surface modification resulted in colloidally stable particles that are successfully redispersed in biologically relevant medium while retaining high hemocompatibility and low cytotoxicity.
RESUMEN
In this work, we exploit the versatile function of cationic phosphonium-conjugated polythiophenes to develop multifunctional platforms for imaging and combined therapy (siRNA delivery and photodynamic therapy). The photophysical properties (absorption, emission and light-induced generation of singlet oxygen) of these cationic polythiophenes were found to be sensitive to molecular weight. Upon light irradiation, low molecular weight cationic polythiophenes were able to light-sensitize surrounding oxygen into reactive oxygen species (ROS) while the highest were not due to its aggregation in aqueous media. These polymers are also fluorescent, allowing one to visualize their intracellular location through confocal microscopy. The most promising polymers were then used as vectors for siRNA delivery. Due to their cationic and amphipathic features, these polymers were found to effectively self-assemble with siRNA targeting the luciferase gene and deliver it in MDA-MB-231 cancer cells expressing luciferase, leading to 30-50% of the gene-silencing effect. In parallel, the photodynamic therapy (PDT) activity of these cationic polymers was restored after siRNA delivery, demonstrating their potential for combined PDT and gene therapy.
RESUMEN
BACKGROUND: Bridged silsesquioxane nanoparticles (BSNs) recently described represent a new class of nanoparticles exhibiting versatile applications and particularly a strong potential for nanomedicine. AIMS: In this work, we describe the synthesis of BSNs from an octasilylated functional porphyrin precursor (PORBSNs) efficiently obtained through a click reaction. These innovative and very small-sized nanoparticles were functionalized with PEG and mannose (PORBSNs-mannose) in order to target breast tumors in vivo. METHODS AND RESULTS: The structure of these nanoparticles is constituted of porphyrins J aggregates that allow two-photon spatiotemporal excitation of the nanoparticles. The therapeutic potential of such photoactivable nanoparticles was first studied in vitro, in human breast cancer cells in culture and then in vivo on zebrafish embryos bearing human tumors. These animal models were intravenously injected with 5 nL of a solution containing PORBSNs-mannose. An hour and half after the injection of photoactivable and targeted nanoparticles, the tumor areas were excited for few seconds with a two-photon beam induced focused laser. We observed strong tumor size decrease, with the involvement of apoptosis pathway activation. CONCLUSION: We demonstrated the high targeting, imaging, and therapeutic potential of PORBSNs-mannose injected in the blood stream of zebrafish xenografted with human tumors.
Asunto(s)
Neoplasias de la Mama/tratamiento farmacológico , Nanopartículas/administración & dosificación , Fotoquimioterapia/métodos , Fármacos Fotosensibilizantes/administración & dosificación , Nanomedicina Teranóstica/métodos , Animales , Neoplasias de la Mama/diagnóstico , Neoplasias de la Mama/patología , Línea Celular Tumoral , Femenino , Humanos , Inyecciones Intravenosas , Rayos Láser , Microscopía de Fluorescencia por Excitación Multifotónica , Nanopartículas/química , Nanopartículas/efectos de la radiación , Fotoquimioterapia/instrumentación , Fármacos Fotosensibilizantes/química , Porfirinas/administración & dosificación , Porfirinas/química , Silanos/administración & dosificación , Silanos/química , Nanomedicina Teranóstica/instrumentación , Ensayos Antitumor por Modelo de Xenoinjerto , Pez CebraRESUMEN
Aim: Polyether pores were designed and tetracycline-loaded mesoporous silica materials, with their surface decorated by silver ions, were prepared, with the aim of reaching high antibacterial activity. Meanwhile, mammalian cell cytotoxicity and hemolytic effects were not observed using material concentrations tenfold the ones optimized for the bactericidal tests. Methods: Pore size was tuned by changing the polyether content and the surface was covalently decorated with silver thiolate groups. Results: We showed that the biological activity was enhanced by modulating silver ions and tetracycline releases by tuning silver thiolate group concentration on the silica surface and/or by modulating the pH of the environment. Conclusion: The combined use of tetracycline and silver ions with the mesoporous drug-delivery carrier was a very effective strategy against susceptible and tetracycline-resistant Escherichia coli bacteria.
RESUMEN
Precise localization of nanoparticles within a cell is crucial to the understanding of cell-particle interactions and has broad applications in nanomedicine. Here, we report a proof-of-principle experiment for imaging individual functionalized nanoparticles within a mammalian cell by correlative microscopy. Using a chemically-fixed HeLa cell labeled with fluorescent core-shell nanoparticles as a model system, we implemented a graphene-oxide layer as a substrate to significantly reduce background scattering. We identified cellular features of interest by fluorescence microscopy, followed by scanning transmission X-ray tomography to localize the particles in 3D, and ptychographic coherent diffractive imaging of the fine features in the region at high resolution. By tuning the X-ray energy to the Fe L-edge, we demonstrated sensitive detection of nanoparticles composed of a 22 nm magnetic Fe3O4 core encased by a 25-nm-thick fluorescent silica (SiO2) shell. These fluorescent core-shell nanoparticles act as landmarks and offer clarity in a cellular context. Our correlative microscopy results confirmed a subset of particles to be fully internalized, and high-contrast ptychographic images showed two oxidation states of individual nanoparticles with a resolution of ~16.5 nm. The ability to precisely localize individual fluorescent nanoparticles within mammalian cells will expand our understanding of the structure/function relationships for functionalized nanoparticles.
Asunto(s)
Óxido Ferrosoférrico/química , Microscopía Fluorescente/métodos , Imagen Molecular/métodos , Nanopartículas/química , Tomografía Computarizada por Rayos X/métodos , Células Inmovilizadas , Fluorescencia , Grafito/química , Células HeLa , Humanos , Microscopía Fluorescente/instrumentación , Imagen Molecular/instrumentación , Nanopartículas/ultraestructura , Oxidación-Reducción , Óxidos/química , Dióxido de Silicio/química , Tomografía Computarizada por Rayos X/instrumentaciónRESUMEN
The selective action of drugs in tumor cells is a major problem in cancer therapy. Most chemotherapy drugs act nonspecifically and damage both cancer and healthy cells causing various side effects. In this study, the preparation of a selective drug delivery system, which is able to act as a carrier for hydrophobic and anticancer drugs is reported. Amino-functionalized silica nanoparticles loaded with curcumin were successfully synthesized via sol-gel approach and duly characterized. Thereafter, the targeting ligand, folate, was covalently attached to amino groups of nanoparticle surface through amide bond formation. The cytotoxic effect of nanoparticles on prostate cancer cells line was evaluated and compared to normal cells line (prostate epithelial cell). Cytotoxicity experiments demonstrated that folate-functionalized nanoparticles were significantly cytotoxic to tumor cells, whereas normal cells were much less affected by the presence of these structures.
Asunto(s)
Antineoplásicos/farmacología , Curcumina/farmacología , Portadores de Fármacos/síntesis química , Nanopartículas/química , Dióxido de Silicio/química , Antineoplásicos/toxicidad , Línea Celular Tumoral , Curcumina/toxicidad , Dimetilsulfóxido , Portadores de Fármacos/toxicidad , Ácido Fólico/análogos & derivados , Ácido Fólico/química , Ácido Fólico/toxicidad , Humanos , Nanopartículas/toxicidad , Tamaño de la Partícula , Propilaminas/química , Propilaminas/toxicidad , Dióxido de Silicio/síntesis química , Dióxido de Silicio/toxicidadRESUMEN
Hydrolyses of HC[triple bond]CSO3SiMe3 (1) and CH3C[triple bond]CSO3SiMe3(2) lead to the formation of acetylenic sulfonic acids HC[triple bond]CSO3H.2.33H2O (3)and CH3C[triple bond]CSO3H.1.88H2O (4). These acids were reacted with guanidinium carbonate to yield [+C(NH2)3][HC[triple bond]CSO3] (5) and [+C(NH2)3][CH3C[triple bond]CSO3] (6). Compounds 1-6 were characterized by spectroscopic methods,and the X-ray crystal structures of the guanidinium salts were determined.The X-ray results of 5 show that the guanidinium cations and organosulfonate anions associate into 1D ribbons through R2(2)(8) dimer interactions,whereas association of these ions in 6 is achieved through R2(2)(8) and R1(2)(6) interactions. The ribbons in 5 associate into 2D sheets through R2(2)(8) dimer interactions and R3(6)(12) rings, whereas those in 6 are connected through R1(2)(6)and R2(2)(8) dimer interactions and R4(6)(14) rings. Compound 6 exhibits a single-layer stacking motif similar to that found in guanidinium alkane- and arenesulfonates, that is, the alkynyl groups alternate orientation from one ribbon to the next. The stacking motif in 5 is also single-layer, but due to interlayer hydrogen bonding between sulfonate anions, the alkynyl groups of each sheet all point to the same side of the sheet.
RESUMEN
The structural characterization of molecular assemblies constructed from imidazolyl-containing haloalkenes and haloalkynes is reported. 1-(3-Iodopropargyl)imidazole (2) and 1-(2,3,3-triiodoallyl)imidazole (5) were synthesized from 1-propargylimidazole (1). In the solid state, these wholly organic modules self-assemble through N...I halogen-bonding interactions, thus giving rise to polymeric chains. The N...I interaction observed in 2 (d(N...I)=2.717 A, angle-spherical C(sp)-I...N=175.8 degrees) is quite strong relative to previously reported data. The N...I interaction in 5 (d(N...I)=2.901 A, angle-spherical C(sp2)-I...N=173.6 degrees) is weaker, in accordance with the order C(sp)-X<--base>C(sp2)-X<--base. Compound 5 was found to give a 1:1 cocrystal 4 with morpholinium iodide (6). In the X-ray crystal studies of 4, N...I halogen-bonding interactions similar to those observed in 5 were shown not to be present, as the arrangement of the molecules is governed by two interwoven hydrogen-bonding networks. The first network involves N-H...O interactions between nearby morpholinium cations, and the second network is based on N-H...N hydrogen bonding between morpholinium cations and imidazolyl groups. Both hydrogen-bonding schemes are charge-assisted. Halogen bonding is not completely wiped out, however, as the triiodoalkene fragment forms a halogen bond with an iodide anion in its vicinity (d(I...I)=3.470 A, angle-spherical C(sp2)-I...I=170.7 degrees). X-ray crystal studies of 6 show a completely different arrangement from that observed in 4, namely, N-H...O interactions are not present. In crystalline 6, morpholinium cations are interconnected through C-H...O bridges (d(H...O)=2.521 and 2.676 A), and the NH2+ groups interact with nearby iodide anions (d(H...I)=2.633 and 2.698 A).