RESUMEN
RNA interference (RNAi) is a powerful and rapidly developing technology that enables precise silencing of genes of interest. However, the clinical development of RNAi is hampered by the limited cellular uptake and stability of the transferred molecules. Electroporation (EP) is an efficient and versatile technique for the transfer of both RNA and DNA. Although the mechanism of electrotransfer of small nucleic acids has been studied previously, too little is known about the potential effects of significantly larger pDNA on this process. Here we present a fundamental study of the mechanism of electrotransfer of oligonucleotides and siRNA that occur independently and simultaneously with pDNA by employing confocal fluorescence microscopy. In contrast to the conditional understanding of the mechanism, we have shown that the electrotransfer of oligonucleotides and siRNA is driven by both electrophoretic forces and diffusion after EP, followed by subsequent entry into the nucleus within 5 min after treatment. The study also revealed that the efficiency of siRNA electrotransfer decreases in response to an increase in pDNA concentration. Overall, the study provides new insights into the mechanism of electrotransfer of small nucleic acids which may have broader implications for the future application of RNAi-based strategies.
Asunto(s)
Electroporación , ARN Interferente Pequeño , Electroporación/métodos , ARN Interferente Pequeño/genética , ARN Interferente Pequeño/química , Oligonucleótidos/química , Plásmidos/genética , ADN/genética , ADN/química , Interferencia de ARN , Humanos , Microscopía ConfocalRESUMEN
The Poisson's ratio and elastic modulus are two parameters determining the elastic behavior of biomaterials. While the effects of elastic modulus on the cell response is widely studied, very little is known regarding the effects of the Poisson's ratio. The micro-architecture of meta-biomaterials determines not only the Poisson's ratio but also several other parameters that also influence cell response, such as porosity, pore size, and effective elastic modulus. It is, therefore, very challenging to isolate the effects of the Poisson's ratio from those of other micro-architectural parameters. Here, we computationally design meta-biomaterials with controlled Poisson's ratios, ranging between -0.74 and +0.74, while maintaining consistent porosity, pore size, and effective elastic modulus. The 3D meta-biomaterials were additively manufactured at the micro-scale using two-photon polymerization (2PP), and were mechanically evaluated at the mesoscale. The response of murine preosteoblasts to these meta-biomaterials was then studied using in vitro cell culture models. Meta-biomaterials with positive Poisson's ratios resulted in higher metabolic activity than those with negative values. The cells could attach and infiltrate all meta-biomaterials from the bottom to the top, fully covering the scaffolds after 17 days of culture. Interestingly, the meta-biomaterials exhibited different cell-induced deformations (e.g., shrinkage or local bending) as observed via scanning electron microscopy. The outcomes of osteogenic differentiation (i.e., Runx2 immunofluorescent staining) and matrix mineralization (i.e., Alizarin red staining) assays indicated the significant potential impact of these meta-biomaterials in the field of bone tissue engineering, paving the way for the development of advanced bone meta-implants. STATEMENT OF SIGNIFICANCE: We studied the influence of Poisson's ratio on bone cell response in meta-biomaterials. While elastic modulus effects are well-studied, the impact of Poisson's ratio, especially negative values found in architected biomaterials, remains largely unexplored. The complexity arises from intertwined micro-architectural parameters, such as porosity and elastic modulus, making it challenging to isolate the Poisson's ratio. To overcome this limitation, this study employed rational computational design to create meta-biomaterials with controlled Poisson's ratios, alongside consistent effective elastic modulus, porosity, and pore size. The study reveals that two-photon polymerized 3D meta-biomaterials with positive Poisson's ratios displayed higher metabolic activity, while all the developed meta-biomaterials supported osteogenic differentiation of preosteoblasts as well as matrix mineralization. The outcomes pave the way for the development of advanced 3D bone tissue models and meta-implants.
Asunto(s)
Materiales Biocompatibles , Osteogénesis , Animales , Ratones , Materiales Biocompatibles/farmacología , Porosidad , Ingeniería de Tejidos , Prótesis e ImplantesRESUMEN
Within the tumor microenvironment (TME), cancer cells use mechanotransduction pathways to convert biophysical forces to biochemical signals. However, the underlying mechanisms and functional significance of these pathways remain largely unclear. The upregulation of mechanosensitive pathways from biophysical forces such as interstitial flow (IF), leads to the activation of various cytokines, including transforming growth factor-ß (TGF-ß). TGF-ß promotes in part via a Smad-dependent signaling pathway the epithelial-mesenchymal transition (EMT) in cancer cells. The latter process is linked to increased cancer cell motility and invasion. Current research models have limited ability to investigate the combined effects of biophysical forces (such as IF) and cytokines (TGF-ß) in a 3D microenvironment. We used a 3D-matrix based microfluidic platform to demonstrate the potentiating effect of IF on exogenous TGF-ß induced upregulation of the Smad-signaling activity and the expression of mesenchymal marker vimentin in A549 lung cancer spheroids. To monitor this, we used stably integrated fluorescent based reporters into the A549 cancer cell genome. Our results demonstrate that IF enhances exogenous TGF-ß induced Smad-signaling activity in lung cancer spheroids embedded in a matrix microenvironment. In addition, we observed an increased cell motility for A549 spheroids when exposed to IF and TGF-ß. Our 3D-microfluidic model integrated with real-time imaging provides a powerful tool for investigating cancer cell signaling and motility associated with invasion characteristics in a physiologically relevant TME.
Asunto(s)
Neoplasias Pulmonares , Humanos , Neoplasias Pulmonares/patología , Factor de Crecimiento Transformador beta/genética , Microfluídica , Mecanotransducción Celular , Línea Celular Tumoral , Transducción de Señal , Citocinas , Transición Epitelial-Mesenquimal , Movimiento Celular , Factor de Crecimiento Transformador beta1/metabolismo , Factor de Crecimiento Transformador beta1/farmacología , Microambiente TumoralRESUMEN
Electrotransfer of nucleic acids and proteins has become crucial in biotechnology for gene augmentation and genome editing. This review explores the applications of electrotransfer in both ex vivo and in vivo scenarios, emphasizing biomedical uses. We provide insights into completed clinical trials and successful instances of nucleic acid and protein electrotransfer into therapeutically relevant cells such as immune cells and stem and progenitor cells. In addition, we delve into emerging areas of electrotransfer where nanotechnology and deep learning techniques overcome the limitations of traditional electroporation.
Asunto(s)
Electroporación , Técnicas de Transferencia de Gen , Ácidos Nucleicos , Proteínas , Electroporación/métodos , Ácidos Nucleicos/administración & dosificación , Ácidos Nucleicos/genética , Humanos , Animales , Edición Génica/métodos , Terapia Genética/métodos , Nanotecnología/métodosRESUMEN
Polycationic carriers promise low cost and scalable gene therapy treatments, however inefficient intracellular unpacking of the genetic cargo has limited transfection efficiency. Charge-reversing polycations, which transition from cationic to neutral or negative charge, can offer targeted intracellular DNA release. We describe a new class of charge-reversing polycation which undergoes a cationic-to-neutral conversion by a reaction with cellular nucleophiles. The deionization reaction is relatively slow with primary amines, and much faster with thiols. In mammalian cells, the intracellular environment has elevated concentrations of amino acids (â¼10×) and the thiol glutathione (â¼1000×). We propose this allows for decationization of the polymeric carrier slowly in the extracellular space and then rapidly in the intracellular milleu for DNA release. We demonstrate that in a lipopolyplex formulation this leads to both improved transfection and reduced cytotoxicity when compared to a non-responsive polycationic control.
RESUMEN
Cell spheroids are in vitro multicellular model systems that mimic the crowded micro-environment of biological tissues. Their mechanical characterization can provide valuable insights in how single-cell mechanics and cell-cell interactions control tissue mechanics and self-organization. However, most measurement techniques are limited to probing one spheroid at a time, require specialized equipment and are difficult to handle. Here, we developed a microfluidic chip that follows the concept of glass capillary micropipette aspiration in order to quantify the viscoelastic behavior of spheroids in an easy-to-handle, more high-throughput manner. Spheroids are loaded in parallel pockets via a gentle flow, after which spheroid tongues are aspirated into adjacent aspiration channels using hydrostatic pressure. After each experiment, the spheroids are easily removed from the chip by reversing the pressure and new spheroids can be injected. The presence of multiple pockets with a uniform aspiration pressure, combined with the ease to conduct successive experiments, allows for a high throughput of tens of spheroids per day. We demonstrate that the chip provides accurate deformation data when working at different aspiration pressures. Lastly, we measure the viscoelastic properties of spheroids made of different cell lines and show how these are consistent with previous studies using established experimental techniques. In summary, our chip provides a high-throughput way to measure the viscoelastic deformation behavior of cell spheroids, in order to mechanophenotype different tissue types and examine the link between cell-intrinsic properties and overall tissue behavior.
Asunto(s)
Microfluídica , Esferoides Celulares , Línea CelularRESUMEN
A functional vascular system is a prerequisite for bone repair as disturbed angiogenesis often causes non-union. Paracrine factors released from human bone marrow derived mesenchymal stromal cells (BMSCs) have angiogenic effects on endothelial cells. However, whether these paracrine factors participate in blood flow dynamics within bone capillaries remains poorly understood. Here, we used two different microfluidic designs to investigate critical steps during angiogenesis and found pronounced effects of endothelial cell proliferation as well as chemotactic and mechanotactic migration induced by BMSC conditioned medium (CM). The application of BMSC-CM in dynamic cultures demonstrates that bioactive factors in combination with fluidic flow-induced biomechanical signals significantly enhanced endothelial cell migration. Transcriptional analyses of endothelial cells demonstrate the induction of a unique gene expression profile related to tricarboxylic acid cycle and energy metabolism by the combination of BMSC-CM factors and shear stress, which opens an interesting avenue to explore during fracture healing. Our results stress the importance of in vivo - like microenvironments simultaneously including biochemical, biomechanical and oxygen levels when investigating key events during vessel repair. STATEMENT OF SIGNIFICANCE: Our results demonstrate the importance of recapitulating in vivo - like microenvironments when investigating key events during vessel repair. Endothelial cells exhibit enhanced angiogenesis characteristics when simultaneous exposing them to hMSC-CM, mechanical forces and biochemical signals simultaneously. The improved angiogenesis may not only result from the direct effect of growth factors, but also by reprogramming of endothelial cell metabolism. Moreover, with this model we demonstrated a synergistic impact of mechanical forces and biochemical factors on endothelial cell behavior and the expression of genes involved in the TCA cycle and energy metabolism, which opens an interesting new avenue to stimulate angiogenesis during fracture healing.
Asunto(s)
Células Endoteliales , Células Madre Mesenquimatosas , Medios de Cultivo Condicionados/metabolismo , Medios de Cultivo Condicionados/farmacología , Humanos , Microfluídica , Neovascularización Fisiológica , Oxígeno/farmacologíaRESUMEN
Electroporation has become a powerful tool for nonviral delivery of various biomolecules such as nucleic acids, proteins, and chemotherapeutic drugs to virtually any living cell by exposing the cell membrane to an intense pulsed electric field. Different multiphysics and multiscale models have been developed to describe the phenomenon of electroporation and predict molecular transport through the electroporated membrane. In this paper, we critically examine the existing mechanistic, single-cell models which allow spatially and temporally resolved numerical simulations of electroporation-induced transmembrane transport of small molecules by confronting them with different experimental measurements. Furthermore, we assess whether any of the proposed models is universal enough to describe the associated transmembrane transport in general for all the different pulse parameters and small molecules used in electroporation applications. We show that none of the tested models can be universally applied to the full range of experimental measurements. Even more importantly, we show that none of the models has been compared to sufficient amount of experimental data to confirm the model validity. Finally, we provide guidelines and recommendations on how to design and report experiments that can be used to validate an electroporation model and how to improve the development of mechanistic models.
Asunto(s)
Electricidad , Electroporación , Transporte Biológico , Membrana Celular/metabolismo , Modelos BiológicosRESUMEN
We developed a localized single-cell electroporation chip to deliver exogenous biomolecules with high efficiency while maintaining high cell viability. In our microfluidic device, the cells are trapped in a microtrap array by flow, after which target molecules are supplied to the device and electrotransferred to the cells under electric pulses. The system provides the ability to monitor the electrotransfer of exogenous biomolecules in real time. We reveal through numerical simulations that localized electroporation is the mechanism of permeabilization in the microtrap array electroporation device. We demonstrate the simplicity and accuracy of this microtrap technology for electroporation by delivery of both small molecules using propidium iodide and large molecules using plasmid DNA for gene expression, illustrating the potential of this minimally invasive method to be widely used for precise intracellular delivery purposes (from bioprocess engineering to therapeutic applications).
Asunto(s)
Electroporación , Dispositivos Laboratorio en un Chip , Plásmidos/genética , Propidio , TransfecciónRESUMEN
An early step of metastasis requires a complex and coordinated migration of invasive tumor cells into the surrounding tumor microenvironment (TME), which contains extracellular matrix (ECM). It is being appreciated that 3D matrix-based microfluidic models have an advantage over conventional in vitro and animal models to study tumor progression events. Recent microfluidic models have enabled recapitulation of key mechanobiological features present within the TME to investigate collective cancer cell migration and invasion. Microfluidics also allows for functional interrogation and therapeutic manipulation of specific steps to study the dynamic aspects of tumor progression. In this review, we focus on recent developments in cancer cell migration and how microfluidic strategies have evolved to address the physiological complexities of the TME to visualize migration modes adapted by various tumor cells.
Asunto(s)
Microfluídica , Neoplasias , Animales , Movimiento Celular , Matriz Extracelular/patología , Neoplasias/patología , Microambiente TumoralRESUMEN
In the research of cancer cell invasion and metastasis, recreation of physiologically relevant and faithful three-dimensional (3D) tumor models that recapitulate spatial architecture, spatiotemporal control of cell communication and signaling pathways, and integration of extracellular cues remains an open challenge. Here, a programmable multifunctional 3D cancer cell invasion microbuckets-hydrogel (Mb-H) platform is developed by integrating various function-variable microbuckets and extracellular matrix (ECM)-like hydrogels. Based on this Mb-H micro platform, the aggregation of multi-cancer cells is well controlled to form cancer cell spheroids, and the guiding relationship of single-cell migration and collective cell migration during the epithelial-mesenchymal transition (EMT) of cancer cell invasion are demonstrated. By programming and precisely assembling multiple functions in one system, the Mb-H platform with spatial-temporal controlled release of cytokine transforming growth factor beta (TGF-ß) and various functionalized Mb-H platforms with intelligent adjustment of cell-matrix interactions are engineered to coordinate the 3D invasive migration of cancer cell spheroids. This programmable and adaptable 3D cancer cell invasion micro platform takes a new step toward mimicking the dynamically changing (localized) tumor microenvironment and exhibits wide potential applications in cancer research, bio-fabrication, cell signaling, and drug screening.
Asunto(s)
Matriz Extracelular , Microambiente Tumoral , Línea Celular Tumoral , Movimiento Celular , Transición Epitelial-Mesenquimal , Matriz Extracelular/metabolismo , Humanos , Hidrogeles , Invasividad NeoplásicaRESUMEN
Epithelial to mesenchymal transition (EMT) is crucial during embryonic development, tissue fibrosis, and cancer progression. Epithelial cells that display a cobblestone-like morphology can undergo a switch to mesenchymal-like phenotype, displaying an elongated spindle shape or a fibroblast-like morphology. EMT is characterized by timely and reversible alterations of molecular and cellular processes. The changes include loss of epithelial and gain of mesenchymal marker expression, loss of polarity, increased cell migratory and invasive properties. Epithelial cells can progress unevenly during this transition and attain hybrid E/M states or metastable EMT states, referred to as epithelial cell plasticity. To gain a deeper insight into the mechanism of EMT, understanding the dynamic aspects of this process is essential. One of the most prominent factors to induce EMT is the cytokine transforming growth factor-ß (TGF-ß). This chapter discusses molecular and cellular techniques to monitor TGF-ß-induced signaling and EMT changes in normal and cancer cell lines. These methods include measuring the TGF-ß-induced activation of its intracellular SMAD effectors proteins and changes in epithelial/mesenchymal marker expression and localization. Moreover, we describe assays of cell migration and dynamic reorganization of the actin cytoskeleton and stress filaments that are frequently part of the TGF-ß-induced EMT cellular response.
Asunto(s)
Transición Epitelial-Mesenquimal , Factor de Crecimiento Transformador beta , Células Epiteliales , Transición Epitelial-Mesenquimal/genética , Transducción de Señal , Proteínas Smad/metabolismo , Factor de Crecimiento Transformador beta/metabolismo , Factor de Crecimiento Transformador beta/farmacologíaRESUMEN
The surface topography of implantable devices is of crucial importance for guiding the cascade of events that starts from the initial contact of the cells with the surface and continues until the complete integration of the device in its immediate environment. There is, however, limited quantitative information available regarding the relationships between the different stages of such cascade(s) and how the design of surface topography influences them. We, therefore, used direct laser writing to 3D-print submicron pillars with precisely controlled dimensions and spatial arrangements to perform a systematic study of such relationships. Using single-cell force spectroscopy, we measured the adhesion force and the work of adhesion of the preosteoblast cells residing on the different types of surfaces. Not only the adhesion parameters (after 2-60 s) but also the formation of focal adhesions was strongly dependent on the geometry and arrangement of the pillars: sufficiently tall and dense pillars enhanced both adhesion parameters and the formation of focal adhesions. Our morphological study of the cells (after 24 h) showed that those enhancements were associated with a specific way of cell settlement onto the surface (i.e., "top state"). The cells interacting with tall and dense pillars were also characterized by numerous thick actin stress fibers in the perinuclear region and possibly high internal stresses. Furthermore, living cells with highly organized cytoskeletal networks exhibited greater values of the elastic modulus. The early responses of the cells predicted their late response including matrix mineralization: tall and dense submicron pillars significantly upregulated the expression of osteopontin after 21 days of culture under both osteogenic and nonosteogenic conditions. Our findings paint a detailed picture of at least one possible cascade of events that starts from initial cell adhesion and continues to subsequent cellular functions and eventual matrix mineralization. These observations could inform the future developments of instructive surfaces for medical devices based on physical surface cues and early markers.
Asunto(s)
Resinas Acrílicas/química , Adhesión Celular/fisiología , Osteoblastos/metabolismo , Osteogénesis/fisiología , Citoesqueleto de Actina/metabolismo , Animales , Línea Celular , Módulo de Elasticidad , Ratones , Modelos Biológicos , Osteoblastos/citología , Osteopontina/metabolismo , HumectabilidadRESUMEN
Transient physical disruption of cell membranes by electric pulses (or electroporation) has significance in biomedical and biological applications requiring the delivery of exogenous (bio)molecules to living cells. We demonstrate that actin networks regulate the cell membrane permeability during electroporation. Disruption of actin networks increases the uptake of membrane-impermeable molecules such as propidium iodide during electroporation. Our experiments at different temperatures ranging from 11 °C to 37 °C show that molecular uptake during electroporation increases with temperature. Furthermore, by examining the temperature-dependent kinetics of propidium iodide uptake, we infer that the activation energy barrier of electroporation is lowered when the actin networks are disrupted. Our numerical calculations of transmembrane voltage show that the reduced activation energy barrier for the cells with disrupted actin is not a consequence of the changes in transmembrane voltage associated with changes in the cell shape due to the disruption of actin, indicating that this could be due to changes in membrane mechanical properties. Our results suggest that the current theoretical models of electroporation should be advanced further by including the contributions of the cytoskeletal networks on the cell membrane permeability during the delivery of exogenous materials.
Asunto(s)
Citoesqueleto de Actina/química , Permeabilidad de la Membrana Celular , Membrana Celular/química , Electroporación , Citoesqueleto de Actina/metabolismo , Animales , Células CHO , Membrana Celular/metabolismo , Cricetulus , Cinética , Propidio/químicaRESUMEN
Water-soluble polyacrylamides have often been used to modify flow response in various water-based technologies and industrial processes, including paints, water treatment, paper manufacturing, and chemical enhanced oil recovery. Polymers are susceptible to degradation at combined high salinity and elevated temperature conditions which limits their overall performance. Hybrid mixtures of hydrophobically modified polyacrylamide (HMPAM) with hydrophobically modified silica nanoparticles (NPs) emerged as a promising strategy for achieving enhanced stability and high viscosity in brines having a high total dissolved solids (TDS) content and high hardness at elevated temperatures (>20 wt% TDS, including >1.5 wt% divalent cations at T > 70 °C). The rheological response of the hybrids at various concentrations of HMPAM and NPs was examined to investigate the synergic effects. Hybridization of HMPAM with NPs led to a higher viscosity at high salinity and elevated temperature. The viscosity improvement was more pronounced when the concentration of HMPAM was in the semi-dilute regime and concentration of NPs was higher than a critical threshold where the viscosity increased roughly by a factor of 1.5. Here we present the mechanisms of improved viscosity behaviour. The rheological data suggest the role of NPs in the bridging between HMPAM molecules, which in turn increases the hydrodynamic radius and consequently the viscosity of the hybrids.
RESUMEN
Size of DNA molecules governs their interaction with the cell membrane during electroporation and their subsequent transport inside the cell. In order to investigate the effect of DNA size on DNA-membrane interaction during electroporation, cells are electro-pulsed with DNA molecules; 15â¯bp, 25â¯bp, 50â¯bp, 100â¯bp and 1000â¯bp (bpâ¯=â¯base pairs). Within the experimental parameter space, DNA-membrane complexes or DNA aggregates are observed at the cell membrane for DNA molecules containing 25 or more base pairs. No aggregates are observed for DNA molecules containing 15â¯bp. For all DNA sizes, direct access to the cytoplasm is observed, however the amount translocated decays with the size. The observed dependency of DNA aggregate formation on the size of the DNA molecules is consistent with the Onsager's theory of condensation of anisotropic rod-like molecules.
Asunto(s)
Membrana Celular/metabolismo , ADN/metabolismo , Electroporación/métodos , Permeabilidad de la Membrana Celular , Citoplasma/metabolismo , Técnicas de Transferencia de Gen , Tamaño de la PartículaRESUMEN
Delivery of naked DNA molecules into living cells via physical disruption of the membrane under electric pulses has potential biomedical applications ranging from gene electro-transfer, electro-chemotherapy, to gene therapy, yet the mechanisms involved in DNA transport remain vague. To investigate the mechanism of DNA translocation across the cell membrane, giant unilamellar vesicles (GUVs) were electroporated in the presence of DNA molecules keeping the size of the DNA molecules as a variable parameter. We experimentally determined the translocation efficiency for each size of the DNA molecule, to compare the results with the existing and conflicting theories of the translocation mechanism i.e. stochastic threading and bulk electrophoresis. We observed that the translocation efficiency is independent of DNA size (ranging from 25-20 000 bp, bp = base pairs), implying that DNA molecules translocate freely across the electro-pores in the lipid membrane in their native polymer conformation, as opposed to unravelling and threading through the electro-pore. Bulk electrophoretic mobility determines the relationship between translocation efficiency and the size of the DNA molecule. This research provides experimental evidence of the mechanistic understanding of DNA translocation across lipid membranes which is essential for devising efficient and predictable protocols for electric field mediated naked DNA delivery.
Asunto(s)
ADN/metabolismo , Electroporación , Movimiento , Liposomas Unilamelares/química , ADN/químicaRESUMEN
We study the role of a biomimetic actin network during the application of electric pulses that induce electroporation or electropermeabilization, using giant unilamellar vesicles (GUVs) as a model system. The actin cortex, a subjacently attached interconnected network of actin filaments, regulates the shape and mechanical properties of the plasma membrane of mammalian cells, and is a major factor influencing the mechanical response of the cell to external physical cues. We demonstrate that the presence of an actin shell inhibits the formation of macropores in the electroporated GUVs. Additionally, experiments on the uptake of dye molecules after electroporation show that the actin network slows down the resealing process of the permeabilized membrane. We further analyze the stability of the actin network inside the GUVs exposed to high electric pulses. We find disruption of the actin layer that is likely due to the electrophoretic forces acting on the actin filaments during the permeabilization of the GUVs. Our findings on the GUVs containing a biomimetic network provide a step towards understanding the discrepancies between the electroporation mechanism of a living cell and its simplified model of the empty GUV.
Asunto(s)
Actinas/química , Electroporación/métodos , Liposomas Unilamelares/química , Citoesqueleto de Actina/química , Animales , Biomimética , Células CHO , Membrana Celular , Permeabilidad de la Membrana Celular , Cricetinae , Cricetulus , Electricidad , Humanos , Cinética , Microscopía Confocal , Distribución Normal , ConejosRESUMEN
Polymer nanowire-related research has shown considerable progress over the last decade. The wide variety of materials and the multitude of well-established chemical modifications have made polymer nanowires interesting as a functional part of a diagnostic biosensing device. This review provides an overview of relevant publications addressing the needs for a nanowire-based sensor for biomolecules. Working our way towards the detection methods itself, we review different nanowire fabrication methods and materials. Especially for an electrical signal read-out, the nanowire should persist in a single-wire configuration with well-defined positioning. Thus, the possibility of the alignment of nanowires is discussed. While some fabrication methods immanently yield an aligned single wire, other methods result in disordered structures and have to be manipulated into the desired configuration.
RESUMEN
Fluidic rectification refers to anisotropic flow resistance upon changing the flow direction. Polymeric solutions, in contrast to Newtonian fluids, can exhibit an anisotropic flow resistance in microfluidic devices by tuning the channel shape at low Reynolds number. Such a concept has not been investigated in an anisotropic porous medium. We have developed a fluidic rectifier based on an anisotropic porous medium consisting of a periodic array of triangular pillars that can operate at a low Reynolds number. Rectification is achieved, when the type of high Weissenberg number elastic instabilities changes with the flow direction. The flow resistance differs across the two directions of the anisotropic porous medium geometry. We have identified the type of elastic instabilities that appear in both forward and backward directions. Particularly, we found a qualitative relation between the dead-zone instability and the onset of fluidic rectification.