Highly efficient functionalized MOF-LIC-1 for extraction of U(VI) and Th(IV) from aqueous solution: experimental and theoretical studies.

A set of four new functionalized MOFs, namely MOF-LIC-DPPC, MOF-LIC-GA, MOF-LIC-PCA and MOF-LIC-SA, were synthesized via the post-synthetic modification (PSM) strategy using MOF-LIC-1 for efficient extraction of U(VI) and Th(IV) from an aqueous medium. FTIR, powder XRD, TGA and SEM-EDX were employed for characterization of the functionalized MOFs. Sorption studies for U(VI) and Th(IV) were performed by monitoring the pH and contact time. Interestingly, the modified MOF-LIC-SA displayed rapid (∼5 min) and efficient extraction towards U(VI) and Th(IV) from an aqueous medium and modified MOF-LIC-DPPC displayed enhanced thermal stability (600 °C) compared with the parent MOF-LIC-1 (450 °C). These studies revealed that the grafted functionalities on MOF-LIC-1 possess enhanced sorption efficiency towards U(VI) and Th(IV) as well as thermal stability. MOF-LIC-SA exhibited the highest sorption capacity towards U(VI) and Th(IV), viz. 298 mg g-1 (pH 6) and 149 mg g-1 (pH 6), respectively. Leaching, recyclability, and radiation stability studies were also performed using MOF-LIC-1 MOFs. Additionally, we investigated the nature of U(VI) interactions on MOFs by applying density functional theory (DFT). PSM MOFs with various functionalities display high selectivity and efficient extraction of U(VI) and Th(IV) over a wide pH range (2-9) and also exhibit easy recovery of metal ions from MOFs. These studies reveal that U(VI) and Th(IV) can be extracted from aqueous streams in a pH range from 6 to 8 and potential applications of these MOFs include recovery of U(VI) and Th(IV) from mine water, sea water, etc. The studies reported in the present work also have extensive potential applications for environmental concerns as well as in the nuclear industry.

Rapid detection strategies for the ultra-level chemosensing of uranyl ions.

A simple and reliable colorimetric probe N,N'-bis-(4-diethylamino-2-hydroxybenzylidene)-1,10-phenanthroline-2,9-carbohydrazide (L) has been synthesised by reacting 4-(diethylamino)salicylaldehyde with 1,10-phenanthroline-2,9-dicarbohydrazide. The sensing ability of L was studied by its interactions with various f-block metal ions and other selected metal ions from s- and d-block by colorimetry, UV-visible spectrophotometry, and smartphone integrated red-green-blue (RGB) model in DMSO : H2O (7 : 3, v/v). The pale-yellow colour of L turns to wine-red upon interaction with uranyl ions (UO22+) and yellow-orange in the presence of Th4+, Zr4+, Fe3+, and Lu3+ ions. Other tested metal ions did not show any colour change of L. This color change offered a simple, quick, and consistent method for the selective and sensitive visual detection of trace levels of UO22+ ions without any need for sophisticated instruments. Sensor L exhibits two absorption bands at 358 and 389 nm due to ligand-to-ligand charge transfer (LLCT). Upon interaction of L with UO22+ and Th4+ ions, absorption bands are exhibited at 480 nm and 422 nm, respectively, due to ligand-to-metal charge transfer (LMCT). The UV-vis spectral studies indicated the formation of a 1 : 2 ligand-to-metal complex between L and UO22+ with an estimated association constant of 1.0 × 104 M-2. Using L, the concentration of UO22+ can be detected as low as 73 nM and 150 nM by spectrophotometry and RGB methods, respectively, without any interference from other tested ions with an RSD < 5% (n = 3). The binding mechanism was studied by 1H NMR titration, ESI mass, and FT-IR spectral analysis and was well supported by theoretical results. Overall, sensor L demonstrates promising analytical applicability for the detection of UO22+ ions in a semi-aqueous medium.

Post synthetically modified IRMOF-3 for efficient recovery and selective sensing of U(vi) from aqueous medium.

A simple and efficient route to develop various novel functionalized MOF materials for rapid and excellent recovery of U(vi) from aqueous medium, along with selective sensing has been demonstrated in the present study. In this connection, a set of four distinct post synthetically modified (PSM) iso-reticular metal organic frameworks were synthesized from IRMOF-3 namely, IRMOF-PC (2-pyridine carboxaldehyde), IRMOF-GA (glutaric anhydride), IRMOF-SMA (sulfamic acid), and IRMOF-DPC (diphenylphosphonic chloride) for the recovery and sensing of U(vi) from aqueous medium. The MOFs were characterized by Fourier transform infrared spectroscopy (FTIR), powder XRD, BET surface area analysis, thermogravimetric analysis (TGA), NMR (13C, 1H and 31P), Scanning Electron Microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). Among all MOFs, post synthetically modified IRMOF-SMA showed enhanced thermal stability of about 420 °C. The MOFs were investigated for U(vi) sorption studies using a batch technique. All the MOFs exhibit excellent sorption capacity towards U(vi) (>90%) and maximum uptake was observed at pH 6. Sorption capacity of MOFs have the following order; IRMOF-3-DPC (300 mg U g-1) > IRMOF-SMA (292 mg U g-1) > IRMOF-PC (289 mg U g-1) > IRMOF-GA (280 mg U g-1) > IRMOF-3 (273 mg U g-1). IRMOF-DPC shows rapid sorption of uranium within 5 min with excellent uptake of U(vi) (>99%). The desorption of U(vi) was examined with different eluents and 0.01 M HNO3 was found to be most effective. The fluorescence sensing studies of U(vi) via IRMOF-3 and its PSM MOFs revealed high sensitivity and selectivity towards U(vi) over other competing rare earth metal ions (La3+, Ce4+, Sm3+, Nd3+, Gd3+, and Eu3+), wherein IRMOF-GA displayed an impressive detection limit of 0.36 mg L-1 for U(vi).

Strong influence of weak hydrogen bonding on actinide-phosphonate complexation: accurate predictions from DFT followed by experimental validation.

Among the varied classes of weak hydrogen bond, the CHO type is one of immense interest as it governs the finer structures of biological and chemical molecules, hence determining their functionalities. In the present work, this weak hydrogen bond has been shown to strongly influence the complexation behaviour of uranyl nitrate [UO2(NO3)2] with diamyl-H-phosphonate (DAHP) and its branched isomer disecamyl-H-phosphonate (DsAHP). The structures of the bare ligands and complexes have been optimized by density functional theory (DFT) calculations. Surprisingly, despite having the same chemical composition the branched UO2(NO3)2·2DsAHP complex shows a remarkably higher stability (by ∼14 kcal mol-1) compared to the UO2(NO3)2·2DAHP complex. Careful inspection of the optimized structures reveals the existence of multiple CHO hydrogen-bonding interactions between the nitrate oxygens or U[double bond, length as m-dash]O oxygens and the α-hydrogens in the alkyl chains of the ligands. Comparatively stronger such bonds are found in the UO2(NO3)2·2DsAHP complex. The binding free energies associated with the complexes are computed and favoured superior binding energetics for the more stable UO2(NO3)2·2DsAHP complex. Calculations involving diisoamyl-H-phosphonate (DiAHP) and its complexes have also been performed. Theoretical predictions are experimentally tested by carrying out the extraction of U(vi) from nitric acid media using these ligands. DAHP, DsAHP and DiAHP are synthesised, characterised by NMR and evaluated for their physicochemical properties viz. viscosity, density and aqueous solubility. It was experimentally discovered that indeed DsAHP complexation with uranyl nitrate is more favoured. H-phosphonates are generically classified as acidic extractants owing to the formation of an enol tautomer at lower acidities, hence complexing the metal ion by proton exchange. Our experiments interestingly reveal a neutral ligand characteristic for DsAHP alone which is generically an acidic extractant. Furthermore, the enol tautomer of H-phosphonates that governs their extraction profiles at low acidities is also explored by DFT and the anomalous pH dependent complexation trend of DsAHP could be successfully explained. The extractions of Pu(iv) and Th(iv) have also been carried out in addition to U(vi). Solvent extraction behaviour of Am(iii) was also studied with all three ligands; the positive binding energies computed for the Am(iii) complexation corroborate with our experimental results on the poor extraction of Am(iii).

Development of the Smartphone-Assisted Colorimetric Detection of Thorium by Using New Schiff's Base and Its Applications to Real Time Samples.

In this paper, a new Th4+ ion-selective chromogenic sensor (L) was developed by reacting 1,10-phenanthroline-2,9-dicarbohydrazide with 2-hydroxy naphthaldehyde. The sensing ability of L toward Th4+ was investigated in solution and paper strips loaded with L using spectrophotometric and colorimetric methods. The selective interaction of L was examined with various f-metal ions and other selected metal ions from s-block and d-block elements. Results show that by the colorimetric method in solution-phase dimethyl sulfoxide/H2O (7:3, v/v) and paper strip methods, the naked-eye detectable color change of L occurred from colorless solution to yellow-orange and pale yellow colour upon interacting with Th4+ and Al3+, respectively, whereas other metal ions did not interfere. The ligand L exhibits two absorbance bands at 320 and 375 nm because of ligand-to-ligand charge transfer. Upon interaction with Th4+, L undergoes red shift of both absorption bands and the formation of a new UV-vis band at 335 and 440 nm. The UV-visible spectral studies indicate the formation of a 1:1 host-guest complex between L and Th4+ with an association constant of 4.7 × 103 M-1. The limit of quantification and limit of detection of L for the analysis of Th4+ are found to be 167 and 50 nM, respectively. The visually detectable color change of L has been well integrated with a smartphone RGB color value to make it an analytical signal for real-time analysis of Th4+ with the detection limit down to 116 nM. Besides, L was applied for the analysis of Th4+ content present in various real water samples, monazite, and lantern mantle samples by spectrophotometry and RGB color values. The binding mode of L with Th4+ is investigated by 1H NMR, electrospray ionization-mass, and theoretical studies.

Complexation Behavior of the Tri-n-butyl Phosphate Ligand with Pu(IV) and Zr(IV): A Computational Study.

Tri-n-butyl phosphate (TBP), used as the extractant in nuclear fuel reprocessing, shows superior extraction abilities for Pu(IV) over a large number of fission products including Zr(IV). We have applied density functional theory (DFT) calculations to explain this selectivity by investigating differences in electronic structures of Pu(NO3)4·2TBP and Zr(NO3)4·2TBP complexes. On the basis of our quantum chemical calculations, we have established the lowest energy electronic states for both complexes; the quintet is the ground state for the former, whereas the latter exists in the singlet spin state. The calculated structural parameters for the optimized geometry of the plutonium complex are in agreement with the experimental results. Atoms in Molecules analysis revealed a considerable amount of ionic character to M-O{TBP} and M-O{NO3} bonds. Additionally, we have also investigated the extraction behavior of TBP for metal nitrates and have estimated the extraction energies to be -73.1 and -57.6 kcal/mol for Pu(IV) and Zr(IV), respectively. The large extraction energy of Pu(IV) system is in agreement with the observed selectivity in the extraction of Pu.

Unraveling the conformational landscape of triallyl phosphate: matrix isolation infrared spectroscopy and density functional theory computations.

The conformations of triallyl phosphate (TAP) were studied using matrix isolation infrared spectroscopy and density functional theory (DFT) calculations. TAP was trapped in N2, Ar, and Xe matrixes at 12 K using an effusive source and the resultant infrared spectra recorded. The computational analysis on conformers of TAP is a challenging problem due to the presence of the large number of conformations. To simplify this problem, conformational analysis was performed on prototypical molecules such as dimethyl allyl phosphate (DMAP) and diallyl methyl phosphate (DAMP), to systematically arrive at the conformations of TAP. The above methodology discerned 131 conformations for TAP, which were found to contribute to the room temperature population. The computations were performed using B3LYP/6-311++G(d,p) level of theory. Vibrational wavenumber calculations were performed for the various conformers to assign the experimental infrared features of TAP, trapped in solid N2, Ar, and Xe matrixes.