Integrated biorefinery approach for utilization of wood waste into levulinic acid and 2-Phenylethanol production under mild treatment conditions.

In a bid to explore the on-site biorefinery approach for conversion of forestry residues, lignocellulosic biomass into value-added products was studied. The bark white pine wood was subjected to the microwave technique of fast and slow hydrolysis under varying acid and biomass concentrations to produce levulinic acid (LA). The HCl (2% v/v) and plant biomass (1% w/v) were identified as the optimum conditions for fast wood hydrolysis (270 ºC for 12 sec), which led to maximum LA yield of 446.68 g/kgPB. The proposed sustainable approach is mild, quick, and utilized a very low concentration of the HCl for the production of LA. The hydrolysate was used as a medium for Kluyveromyces marxianus growth to produce 2-phenylethanol (2-PE). K. marxianus used 74-95% of furfural from hydrolysate as a co-substrate to grow. The proposed model of the integrated biorefinery is an affordable on-site approach of using forest waste into localized solutions to produce LA and 2-PE.

Recent challenges in biological cyanidation and oxidation of sulfide-based refractory gold ore.

In mining industries, biomining (comprising biooxidation and bioleaching) is implemented to extract metals from specific ores and waste streams with less environmental effect and expense. Usually, micron-sized gold particles are held in a crystal lattice of iron sulfide minerals and expensively extracted using common approaches. Researchers and industries are interested in developing recent technology and biologically sustainable methods in both pretreatment and further extraction steps for extracting this valuable metal from ores. Diverse studies in biooxidation, as a conventional pretreatment, and biocyanidation, as a new proposed biotechnological method in the downstream gold extraction step, have addressed scientific and technological issues in the extraction of this metal. These two methods have become economically practical by merging high-throughput microbiological data, extraction and recovery process knowledge, and theory validation. However, there is still a gap in the implementation of both the pretreatment method and extraction method due to the consistency and their compatibility with operational recovery conditions. This review brings out the recent biooxidation and biocyanidation improvements, innovation, industry and academic research, and obstacles to gold extraction with a brief explanation to address the recent developments.

Enzymatic digestibility of lignocellulosic wood biomass: Effect of enzyme treatment in supercritical carbon dioxide and biomass pretreatment.

Energy and resource intensive mechanical and chemical pretreatment along with the use of hazardous chemicals are major bottlenecks in widespread lignocellulosic biomass utilization. Herein, the study investigated different pretreatment methods on spruce wood namely supercritical CO2 (scCO2) pretreatment, ultrasound-assisted alkaline pretreatment, and acetosolv pulping-alkaline hydrogen peroxide bleaching, to enhance the enzymatic digestibility of wood using optimized enzyme cocktail. Also, the effect of scCO2 pretreatment on enzyme cocktail was investigated after optimizing the concentration and temperature of cellulolytic enzymes. The impact of scCO2 and ultrasound-assisted alkaline pretreatments of wood were insignificant for the enzymatic digestibility, and acetosolv pulping-alkaline hydrogen peroxide bleaching was the most effective pretreatment that showed the release of total reducing sugar yield (TRS) of ∼95.0 wt% of total hydrolyzable sugars (THS) in enzymatic hydrolysis. The optimized enzyme cocktail showed higher yield than individual enzymes with degree of synergism 1.34 among the enzymes, and scCO2 pretreatment of cocktail for 0.5-1.0 h at 10.0-22.0 MPa and 38.0-54.0 °C had insignificant effect on the enzyme's primary and global secondary structure of cocktail and its activity.

Microfluidic Sensor Based on Cell-Imprinted Polymer-Coated Microwires for Conductometric Detection of Bacteria in Water.

The rapid, inexpensive, and on-site detection of bacterial contaminants using highly sensitive and specific microfluidic sensors is attracting substantial attention in water quality monitoring applications. Cell-imprinted polymers (CIPs) have emerged as robust, cost-effective, and versatile recognition materials with selective binding sites for capturing whole bacteria. However, electrochemical transduction of the binding event to a measurable signal within a microfluidic device to develop easy-to-use, compact, portable, durable, and affordable sensors remains a challenge. For this paper, we employed CIP-functionalized microwires (CIP-MWs) with an affinity towards E. coli and integrated them into a low-cost microfluidic sensor to measure the conductometric transduction of CIP-bacteria binding events. The sensor comprised two CIP-MWs suspended perpendicularly to a PDMS microchannel. The inter-wire electrical resistance of the microchannel was measured before, during, and after exposure of CIP-MWs to bacteria. A decline in the inter-wire resistance of the sensor after 30 min of incubation with bacteria was detected. Resistance change normalization and the subsequent analysis of the sensor's dose-response curve between 0 to 109 CFU/mL bacteria revealed the limits of detection and quantification of 2.1 × 105 CFU/mL and 7.3 × 105 CFU/mL, respectively. The dynamic range of the sensor was 104 to 107 CFU/mL where the bacteria counts were statistically distinguishable from each other. A linear fit in this range resulted in a sensitivity of 7.35 µS per CFU/mL. Experiments using competing Sarcina or Listeria cells showed specificity of the sensor towards the imprinted E. coli cells. The reported CIP-MW-based conductometric microfluidic sensor can provide a cost-effective, durable, portable, and real-time solution for the detection of pathogens in water.

Imipenem-metal complexes: Computational analysis and toxicity studies with wastewater model microorganisms.

The occurrence of antibiotic residues in diverse water sources has long been acknowledged as a potential health concern due to the emergence and spread of antibiotic-resistant bacteria and genes. However, there have been limited studies into the presence of antibiotic-metal complexes (AMCs) in real-time wastewater matrices, and their impact on wastewater microbial communities. The present work, in this regard, investigated the stability of Imipenem-metal complexes (Me = Mg (II), Ca (II), Fe (II), Cu (II), and Al (III)) with computational studies, stoichiometry with potentiometric measurements, and their antibacterial activity towards wastewater model microorganisms- Bacillus subtilis (B. subtilis) and Escherichia coli (E. Coli) by Colony Forming Unit (CFU) method. The lower energy of Imipenem-metal complexes than the parent antibiotic- Imipenem, during energy optimization using density functional (DFT) methods, revealed that metal interactions of Imipenem stabilize the drug by minimizing its energy. Further, CFU studies indicated that these complexes display higher antimicrobial activity than parent antibiotics. The electron delocalization over the entire chelated system (AMCs) reduces polarity and increases the lipophilicity of the complexes, thereby facilitating stronger interaction between AMCs and the bacterial cell membrane. Results indicate increased antibacterial activity of Imipenem-metal complexes for both E. coli and B. subtilis. The antibacterial activity, was however, more pronounced in B. subtilis, with >97% growth inhibition for metal complexes of Imipenem (at a Minimum Inhibitory Concentration of 20 nM or 6 ppb (i.e., MIC90)), for both the stoichiometric ratios (metal to ligand) ratios (M: L 1: 1 and 2: 1). All around, with increased stability and toxicity, AMCs are emerging as contaminants of concern and demand immediate attention to devise methods for their removal.

Novel BTEX-degrading strains from subsurface soil: Isolation, identification and growth evaluation.

Monoaromatic hydrocarbons such as benzene, toluene, ethylbenzene, and o, m, and p-xylenes (BTEX) are high-risk pollutants because of their mutagenic and carcinogenic nature. These pollutants are found with elevated levels in groundwater and soil in Canada at several contaminated sites. The intrinsic microbes present in the subsurface have the potential to degrade pollutants by their metabolic pathways and convert them to non-toxic products. However, the low subsurface temperature (5-10 °C) limits their growth and degradation ability. This study examined the feasibility of subsurface heat augmentation using geothermal heating for BTEX bioremediation. Novel potent BTEX-degrading bacterial strains were isolated from soil at 3.0, 42.6, and 73.2 m depths collected from a geothermal borehole during installation and screened using an enrichment technique. The selected strains were identified with Sanger sequencing and phylogenetic tree analysis, revealing that all the strains except Bacillus subtilis are novel with respective to BTEX degradation. The isolates, Microbacterium esteraromaticum and Bacillus infantis showed the highest degradation with 67.98 and 65.2% for benzene, 72.8 and 71.02% for toluene, 77.52 and 76.44% for ethylbenzene, and 74.58 and 74.04% for xylenes respectively. Further, temperature influence at 15 ± 1 °C, 28 ± 1 °C and 40 ± 1 °C was observed, which showed increased growth by two-fold and on average 35-49% more biodegradation at higher temperatures. Results showed that temperature is a positive stimulant for bioremediation, hence geothermal heating could also be a stimulant for in-situ bioremediation.

Co-Fermentation of Agri-Food Residues Using a Co-Culture of Yeasts as a New Bioprocess to Produce 2-Phenylethanol.

Whey is a dairy residue generated during the production of cheese and yogurt. Whey contains mainly lactose and proteins, contributing to its high chemical oxygen demand (COD). Current environmental regulations request proper whey disposal to avoid environmental pollution. Whey components can be transformed by yeast into ethanol and biomolecules with aroma and flavor properties, for example, 2-phenyethanol (2PE), highly appreciated in the industry due to its organoleptic and biocidal properties. The present study aimed to valorize agri-food residues in 2PE by developing suitable bioprocess. Cheese whey was used as substrate source, whereas crab headshells, residual soy cake, and brewer's spent yeast (BSY) were used as renewable nitrogen sources for the yeasts Kluyveromyces marxianus and Debaryomyces hansenii. The BSYs promoted the growth of both yeasts and the production of 2PE in flask fermentation. The bioprocess scale-up to 2 L bioreactor allowed for obtaining a 2PE productivity of 0.04 g2PE/L·h, twofold better productivity results compared to the literature. The bioprocess can save a treatment unit because the whey COD decreased under the detection limit of the analytical method, which is lower than environmental requirements. In this way, the bioprocess prevents environmental contamination and contributes to the circular economy of the dairy industry.

Influence of elevated pressure and pressurized fluids on microenvironment and activity of enzymes.

Enzymes have great potential in bioprocess engineering due to their green and mild reaction conditions. However, there are challenges to their application, such as enzyme extraction and purification costs, enzyme recovery, and long reaction time. Enzymatic reaction rate enhancement and enzyme immobilization have the potential to overcome some of these challenges. Application of high pressure (e.g., hydrostatic pressure, supercritical carbon dioxide) has been shown to increase the activity of some enzymes, such as lipases and cellulases. Under high pressure, enzymes undergo multiple alterations simultaneously. High pressure reduces the bond lengths of molecules of reaction components and causes a reduction in the activation volume of enzyme-substrate complex. Supercritical CO2 interacts with enzyme molecules, catalyzes structural changes, and removes some water molecules from the enzyme's hydration layer. Interaction of scCO2 with the enzyme also leads to an overall change in secondary structure content. In the extreme, such changes may lead to enzyme denaturation, but enzyme activation and stabilization have also been observed. Immobilization of enzymes onto silica and zeolite-based supports has been shown to further stabilize the enzyme and provide resistance towards perturbation under subjection to high pressure and scCO2.

Microplastic pollution and associated health hazards: Impact of COVID-19 pandemic.

The COVID-19 pandemic led to an increase in plastic used for medical purposes such as personal protective equipment and packaging materials. A very low share of plastics is recycled while the majority is sent to landfills. This plastic may degrade over time to form microplastics which may pollute land, air, and water sources. An increase in microplastics can increase the disease risk in human well-being's. The ultimate fate of microplastic is accumulation inside the human body posing the risk of different health conditions like cancer, diabetes, and allergic reactions. Hence, proper detection and disposal methods should be devised to deal with the rise in microplastic pollution.

Life Cycle Assessment of Microbial 2,3-Butanediol Production from Brewer's Spent Grain Modeled on Pinch Technology.

Microbial production of 2,3-butanediol (BDO) has received considerable attention as a promising alternate to fossil-derived BDO. In our previous work, BDO concentration >100 g/L was accumulated using brewer's spent grain (BSG) via microbial routes which was followed by techno-economic analysis of the bioprocess. In the present work, a life cycle assessment (LCA) was conducted for BDO production from the fermentation of BSG to identify the associated environmental impacts. The LCA was based on an industrial-scale biorefinery processing of 100 metric tons BSG per day modeled using ASPEN plus integrated with pinch technology, a tool for achieving maximum thermal efficiency and heat recovery from the process. For the cradle-to-gate LCA, the functional unit of 1 kg of BDO production was selected. One-hundred-year global warming potential of 7.25 kg CO2/kg BDO was estimated while including biogenic carbon emission. The pretreatment stage followed by the cultivation and fermentation contributed to the maximum adverse impacts. Sensitivity analysis revealed that a reduction in electricity consumption and transportation and an increase in BDO yield could reduce the adverse impacts associated with microbial BDO production.

Emerging contaminants bioremediation by enzyme and nanozyme-based processes - A review.

Due to their widespread occurrence and the inadequate removal efficiencies by conventional wastewater treatment plants, emerging contaminants (ECs) have recently become an issue of great concern. Current ongoing studies have focused on different physical, chemical, and biological methods as strategies to avoid exposing ecosystems to significant long-term risks. Among the different proposed technologies, the enzyme-based processes rise as green biocatalysts with higher efficiency yields and lower generation of toxic by-products. Oxidoreductases and hydrolases are among the most prominent enzymes applied for bioremediation processes. The present work overviews the state of the art of recent advances in enzymatic processes during wastewater treatment of EC, focusing on recent innovations in terms of applied immobilization techniques, genetic engineering tools, and the advent of nanozymes. Future trends in the enzymes immobilization techniques for EC removal were highlighted. Research gaps and recommendations on methods and utility of enzymatic treatment incorporation in conventional wastewater treatment plants were also discussed.

Formulation of synthetic bacteria consortia for enzymatic biodegradation of polyaromatic hydrocarbons contaminated soil: soil column study.

As an efficient method to remove contaminants from highly polluted sites, enzyme biodegradation addresses unresolved issues such as bioremediation inefficiency. In this study, the key enzymes involved in PAH degradation were brought together from different arctic strains for the biodegradation of highly contaminated soil. These enzymes were produced via a multi-culture of psychrophilic Pseudomonas and Rhodococcus strains. As a result of biosurfactant production, the removal of pyrene was sufficiently prompted by Alcanivorax borkumensis. The key enzymes (e.g., naphthalene dioxygenase, pyrene dioxygenase, catechol-2,3 dioxygenase, 1-hydroxy-2-naphthoate hydroxylase, protocatechuic acid 3,4-dioxygenase) obtained via multi-culture were characterized by tandem LC-MS/MS and kinetic studies. To simulate in situ application of produced enzyme solutions, pyrene- and dilbit-contaminated soil was bioremediated in soil columns and flask tests by injecting enzyme cocktails from the most promising consortia. The enzyme cocktail contained about 35.2 U/mg protein pyrene dioxygenase, 61.4 U/mg protein naphthalene dioxygenase, 56.5 U/mg protein catechol-2,3-dioxygenase, 6.1 U/mg protein 1-hydroxy-2-naphthoate hydroxylase, and 33.5 U/mg protein protocatechuic acid (P3,4D) 3,4-dioxygenase enzymes. It was found that after 6 weeks, the average pyrene removal values showed that the enzyme solution could be effective in the soil column system (80-85% degradation of pyrene).

Evaluation of scale-up effect on cold-active enzyme production and biodegradation tests using pilot-scale bioreactors and a 3D soil tank.

Despite recent attention being paid to the biodegradation of petroleum hydrocarbons in cold environments, scale-up studies of biodegradation are lacking. Herein, the effect of scale-up on the enzymatic biodegradation of highly contaminated soil at low temperatures was studied. A novel cold-adapted bacteria (Arthrobacter sp. S2TR-06) was isolated that could produce cold-active degradative enzymes (xylene monooxygenase (XMO) and catechol 2,3-dioxygenase (C2,3D)). Enzyme production was investigated on 4 different scales (lab to pilot scale). The results showed a shorter fermentation time, and the highest production of enzymes and biomass (107 g/L for biomass, 109 U/mL, and 203 U/mL for XMO and C2,3D after 24 h) was achieved in the 150-L bioreactor due to enhanced oxygenation. Multi-pulse injection of p-xylene into the production medium was needed every 6 h. The stability of membrane-bound enzymes can be increased up to 3-fold by adding FeSO4 at 0.1% (w/v) before extraction. Soil tests also showed that biodegradation is scale-dependent. The maximum biodegradation rate decreased from 100% at lab-scale to 36% in the 300-L sand tank tests due to limited access of enzymes to trapped p-xylene in soil pores, low dissolved oxygen in the water-saturated zone, soil heterogeneity, and the presence of the free phase of p-xylene. The result demonstrated that formulation of enzyme mixture with FeSO4 and direct injection of enzyme mixture (third scenario) can increase the efficiency of bioremediation in heterogeneous soil. In this study, it was demonstrated that cold-active degradative enzyme production can be scaled up to an industrial scale and enzymatic treatment can be used to effectively bioremediate p-xylene contaminated sites. This study could provide key scale-up guidance for the enzymatic bioremediation of mono-aromatic pollutants in water-saturated soil under cold conditions.

Simulation of novel jellyfish type of process for bioremediation application.

A bioinspired device was fabricated as a sustainable remedial method and its performance as a membrane-enzyme reactor with cyclic ultrafiltration was investigated. The body of the jellyfish-like device was composed of two parts: 1) Jellyfish arms: Mono and co-axial electrospinning have been utilized to synthesize the flexible parts (e.g., multilayer membrane PS-PVDF/PAN/PS-PVDF) used for immobilization of aliphatic degrading enzymes, and 2) Jellyfish tentacles: Hollow fiber membranes were selected for physical immobilization of polycyclic aromatic hydrocarbon (PAH) degrading enzymes. To study the behavior of the membrane/enzyme reactor, the hollow fiber enzyme reactor with pulsation was operated by recycling an enzyme solution to assess ultrafiltration efficiency. A mathematical model was suggested to describe the experimental data obtained in this study to predict the effectiveness of the reactor for PAH removal. When testing the performance of the jellyfish-like device, those equipped with nanofibers with an oil sorption capacity of (10. ±0.7gdilbit/gfiber) were more effective at removing oil particles before they touched the hollow fiber membrane surface. Moreover, the reaction rate measured in a free soluble enzyme and a recirculating immobilized enzyme solution exhibited a slight difference in the kinetic parameter, Km (0.03 and 0.021 mM) due to the internal diffusional resistance. Based on biodegradation studies, a synergistic effect between membrane adsorption, enzymatic degradation, and ultrafiltration was proposed for the removal of anthracene from the column of water.

Nanocrystalline cellulose derived from spruce wood: Influence of process parameters.

The cellulose nanocrystals (CNCs) were produced from spruce wood using less hazardous and toxic reagents with understanding of influence of process parameters on CNCs properties. This study employed acetosolv pulping followed by alkaline-peroxide bleaching, eliminating highly reactive chemicals such as Na-chlorites and Na-sulfite for cellulose pulp extraction from spruce wood. Cellulose pulp yield of 41.5 ± 0.7 wt% of dry wood was obtained from pulping followed by bleaching treatment. Cellulose pulp was hydrolyzed with 59.0-65.0 wt% sulfuric acid followed by ultrasonic treatment to produce CNCs. CNCs yield of 8.0 ± 3.2 wt% of dry wood was obtained at 65 wt% acid concentration and yield of 25.1 ± 0.7 wt% at 62 wt% acid concentration. The optimization of acid hydrolysis and ultrasonic treatment resulted in CNCs with high aspect ratios (length/width) up to 48.1. It was demonstrated that higher acid concentration requires lower intensity of ultrasonic treatment for CNCs dispersion, and that higher intensity could enhance aspect ratio without impacting the crystallinity index. However, ultrasonic treatment for longer than 5 min led to destruction of the whisker morphology of CNCs. The extracted CNCs possess high crystallinity index of 80.8 ± 1.7 %, low residual hemicellulose (<2.0 %) and lignin (<0.7 %), and high-char content of 26.7 wt% from thermal degradation.

Intelligent modelling for the elimination of lanthanides (La3+, Ce3+, Nd3+ and Eu3+) from aqueous solution by magnetic CoFe2O4 and CoFe2O4-GO spinel ferrite nanocomposites.

In this research, a novel CoFe2O4-GO (Graphen Oxide) resulting from the combination of high applicable magnetic and organic base materials and synthesized with a simple and fast co-precipitation route was synthesized for the REEs (Rare Earth Elements) extraction. This adsorbent could remove the La3+, Ce3+, Nd3+ and Eu3+ by maximum adsorption capacity of 625, 626, 714.2, 1111.2 mg/g at optimized pH = 6, respectively. A data-driven model was obtained using Group Method of Data Handling (GMDH)-based Neural Network to estimate the adsorption capacity of these LREEs as a function of time, pH, temperature, adsorbent ζ (zeta)- potential, initial concentration of lanthanides ions, and ε which is defined by the physico-chemical properties of lanthanides. The results clearly indicated that the model estimate the experimental values with good deviation (mostly less than 10%) and it can be used for the prediction of the results from other similar researches with less than 25% deviation. The results of sensitivity analysis indicated that the adsorption capacity is more sensitive to pH of the solution, temperature, and ε. Finally, the desorption studies showed an excellent removal efficiency (97%) at least for three adsorption-desorption cycles. These results claimed that the CoFe2O4-GO is a highly efficient adsorbent for the REEs extraction.

A paradigm shift towards production of sustainable bioenergy and advanced products from Cannabis/hemp biomass in Canada.

The global cannabis (Cannabis sativa) market was 17.7 billion in 2019 and is expected to reach up to 40.6 billion by 2024. Canada is the 2nd nation to legalize cannabis with a massive sale of $246.9 million in the year 2021. Waste cannabis biomass is managed using disposal strategies (i.e., incineration, aerobic/anaerobic digestion, composting, and shredding) that are not good enough for long-term environmental sustainability. On the other hand, greenhouse gas emissions and the rising demand for petroleum-based fuels pose a severe threat to the environment and the circular economy. Cannabis biomass can be used as a feedstock to produce various biofuels and biochemicals. Various research groups have reported production of ethanol 9.2-20.2 g/L, hydrogen 13.5 mmol/L, lipids 53.3%, biogas 12%, and biochar 34.6% from cannabis biomass. This review summarizes its legal and market status (production and consumption), the recent advancements in the lignocellulosic biomass (LCB) pre-treatment (deep eutectic solvents (DES), and ionic liquids (ILs) known as "green solvents") followed by enzymatic hydrolysis using glycosyl hydrolases (GHs) for the efficient conversion efficiency of pre-treated biomass. Recent advances in the bioconversion of hemp into oleochemicals, their challenges, and future perspectives are outlined. A comprehensive insight is provided on the trends and developments of metabolic engineering strategies to improve product yield. The thermochemical processing of disposed-off hemp lignin into bio-oil, bio-char, synthesis gas, and phenol is also discussed. Despite some progress, barricades still need to be met to commercialize advanced biofuels and compete with traditional fuels.

A cleaner approach for high-efficiency regeneration of base and precious metals from waste printed circuit boards through stepwise oxido-acidic and thiocyanate leaching.

This work evaluated a green route for developing an eco-friendly flowsheet to regenerate base and precious metals from waste printed circuits boards (WPCBs). Copper (as nanoparticles with an average diameter of 50 nm) and other base metals were extracted via oxidative acid leaching with high efficiency. Thiocyanate was employed for the first time as a green and economical reagent for the extraction of gold from pretreated WPCB. The effect of various parameters, including reagent dosage and temperature, was evaluated on the gold leaching rate, and 100% gold dissolution was achieved at the optimal condition. It was found that ferric iron concentration as the gold leaching oxidant has a notable effect on gold extraction. Also, at temperatures above room temperature, the recovery rate increases in a short period and then decreases continuously. The activation energy of the optimum gold thiocyanate leaching was found to be 42.84 kJ/mol, indicating chemical reaction to be the rate-controlling step. Gold extraction from the thiocyanate medium was carried out by employing activated carbon, where 100% gold adsorption was achieved in 2 h. Toxicity assessment of final residue revealed that it could be categorized as an environmentally safe waste with negligible risk.

Novel approach for the management of acid mine drainage (AMD) for the recovery of heavy metals along with lipid production by Chlorella vulgaris.

The treatment of acid mine drainage (AMD) is of paramount importance for environmental sustainability. A two-stage process involving AMD remediation and simultaneous lipid production represents a highly efficient approach with zero-waste generation. Alkaline (NaOH) treatment of AMD at pH 8.0, 10.0, and 12.0 had significantly reduced metal loads (copper (Cu), cobalt (Co), chromium (Cr), cadmium (Cd), nickel (Ni), and zinc (Zn)) compared to the acidic pH range (4.0 and 6.0). The concentration levels of sulfates (SO4 = 4520 mg/L), iron (Fe = 788 mg/L), aluminum (Al = 310 mg/L), and manganese (Mn = 19.4) were reduced to 2971 mg/L, 10.3 mg/L, 16.4 mg/L, and 1.3 mg/L, respectively at pH value 8.0. AMD with a pH value of 8.0 was later chosen as an ideal medium to favor the lipid accumulation by Chlorella vulgaris. Algal biomass was increasing to 5.5 g/L from 0.6 g/L of AMD-based medium within 15 days of cultivation. The FTIR and SEM-EDS studies revealed significant morphological changes in the microbial cell wall. The metals might positively impact lipid production in microalgae, where lipid yield achieved 0.18 g/g of glucose with lipid content of 0.35 g/g of biomass. The fatty acid profile presented 53.4% of saturated fatty acid content with a cetane value of 60.7. Thus, the efficiency of C. vulgaris was demonstrated with AMD treatment proving it to be a good candidate for bioenergy production.