New species of the Spiny Mouse genus Neacomys (Cricetidae, Sigmodontinae) from northwestern Ecuador.

Neacomys is a genus of small spiny or bristly sigmodontine rodents that are common components of mammalian faunas in multiple biomes on Central and South America. Recent studies on this group have demonstrated that there is cryptic diversity yet to be discovered within currently recognized species that have not received comprehensive revisions, as well as in areas that have been overlooked. Here we ratify this assertion by describing a new species previously misidentified as the Narrow-footed Spiny Mouse (Neacomystenuipes) from the Chocó biogeographic region in northwestern Ecuador, Neacomysmarci Brito & Tinoco, sp. nov. Distinctiveness of this entity is supported by the combination of the following morphological characters: small size (head-body length 65-85 mm); long tail (69-126% longer than head-body length); pale buff-colored but gray-based belly fur; white throat; hypothenar pad usually absent; long nasals; and a condylar process higher than the coronoid process. Likewise genetic distance analyses and phylogenetic reconstructions based on cytochrome-b (Cytb) sequence data indicate a clear divergence from typical populations of N.tenuipes, and a sister relationship between them. The results presented here increase the diversity of Neacomys to 24 species, placing it among the most diverse genera within the sigmodontine rodents.

Programmable Data Plane Applications in 5G and Beyond Architectures: A Systematic Review.

The rapid evolution of 5G and beyond technologies has sparked an unprecedented surge in the need for networking infrastructure that can deliver high speed, minimal latency, and remarkable flexibility. The programmable data plane, which enables the dynamic reconfiguration of network functions and protocols, is becoming increasingly important in meeting these requirements. This paper provides an overview of the current state of the art in programmable data planes implemented in 5G and beyond architectures. It proposes a classification of the reviewed studies based on system architecture and specific use cases. Furthermore, the article surveys the primary applications of programmable devices in emerging telecommunication networks, such as tunneling and forwarding, network slicing, cybersecurity, and in-band telemetry. Finally, this publication summarizes the open research challenges and future directions. In addition to offering a comprehensive review of programmable data plane applications in telecommunication networks, this article aims to guide further research in this promising field for network operators and researchers alike.

Carbonation of Alkali-Activated Materials: A Review.

This paper presents a literature review on the effects of accelerated carbonation on alkali-activated materials. It attempts to provide a greater understanding of the influence of CO2 curing on the chemical and physical properties of various types of alkali-activated binders used in pastes, mortars, and concrete. Several aspects related to changes in chemistry and mineralogy have been carefully identified and discussed, including depth of CO2 interaction, sequestration, reactions with calcium-based phases (e.g., calcium hydroxide and calcium silicate hydrates and calcium aluminosilicate hydrates), as well as other aspects related to the chemical composition of alkali-activated materials. Emphasis has also been given to physical alterations such as volumetric changes, density, porosity, and other microstructural properties caused by induced carbonation. Moreover, this paper reviews the influence of the accelerated carbonation curing method on the strength development of alkali-activated materials, which has been awarded little attention considering its potential. This curing technique was found to contribute to the strength development mainly through decalcification of the Ca phases existing in the alkali-activated precursor, leading to the formation of CaCO3, which leads to microstructural densification. Interestingly, this curing method seems to have much to offer in terms of mechanical performance, making it an attractive curing solution that can compensate for the loss in performance caused by less efficient alkali-activated binders replacing Portland cement. Optimising the application of such CO2-based curing methods for each of the potential alkali-activated binders is recommended for future studies for maximum microstructural improvement, and thus mechanical enhancement, to make some of the "low-performing binders" adequate Portland cement substitutes.

Durability of Concrete with Partial Replacement of Portland Cement by Incorporating Reactive Magnesium Oxide and Fly Ash.

In this research, the durability performance of sustainable concrete with the incorporation of reactive magnesium oxide (MgO) and fly ash (FA) was evaluated. The partial replacement of cement with these two materials is an appealing solution for the construction sector due to sustainability benefits and shrinkage reduction. The incorporation of FA by partial replacement of cement was carried out at 0%, 15% and 30%. The incorporation of MgO in concrete was carried out at 0%, 5%, 10% and 20%. Two types of MgO were used, one from Australia and another of Spanish origin. These two materials were evaluated in terms of their individual incorporation, and then an evaluation was carried out when the two were simultaneously used. In terms of durability, performance losses between 3% and 95% were obtained in all tests (water absorption by capillarity and immersion, carbonation depth and resistance to chloride penetration). However, over time, the difference in performance relative to the reference concrete tends to decrease due to the slow hydration that characterizes these two alternative materials. It was found that, in most of the tests, no overlapping of the negative effects occurred. In other words, the simultaneous incorporation of MgO and FA caused performance losses lower than the sum of the losses of their individual incorporation.

The Influence of Recycled Cement, Fly Ash, and Magnesium Oxide on the Mechanical Performance of Sustainable Cementitious Materials.

In the construction industry, cement is the most widely used material. So, to achieve greater sustainability in this industry, it is imperative to improve the sustainability of this material. One way to reduce the ecological footprint of cement is to replace it, even if partially, with other more sustainable materials that can act as binders. This paper analyses the mechanical properties of more sustainable mortars containing recycled cement (RC), fly ash (FA), and magnesium oxide (MgO). Different types of binary, ternary, and quaternary mortars were used: containing recycled cement (5% and 10%), fly ash (10% and 20%), and MgO (7.5% and 15%). An experimental campaign was carried out analysing air content, density, compressive and flexural strengths, modulus of elasticity, and ultrasonic pulse velocity. The ternary mortars showed decreases between 0.4% (M-5RC10FA) and 35.3% (M-10RC15Mg) in terms of compressive strength at 365 days (compared to RM), when the theoretically expected decrease (the sum of the decreases obtained with the individual incorporation of these materials) would be between 16.6% and 41.5%, respectively. The results obtained allow for concluding that the joint use of these materials in ternary mortars improves the mechanical capacity, relative to the individual incorporation of each material in binary mortars.

Physico-Mechanical Performances of Mortars Prepared with Sorted Earthquake Rubble: The Role of CDW Type and Contained Crystalline Phases.

Construction and demolition waste (CDW) from earthquake rubbles was used here as recycled aggregates (RA) in cementitious binders. The materials were sorted in six groups: concrete (CO), natural stone (NS), tile (TI), brick (BR), perforated brick (PF) and roof tile (RT). The abundance (wt.%) of crystalline phases in each RA type was determined by X-ray Powder Diffraction (XRPD). Each group of RAs was used alone (100 wt.% of RA) and mixed with quartz-rich virgin aggregates (VA) to prepare 13 types of mortars (12 specimens per type): one reference mortar (RM) with only VA, six recycled aggregate mortars (RAM) and six recycled-plus-virgin aggregate mortars (RVAM). The physical and mechanical properties of aggregates and mortars reflect the type and abundance of crystalline phases in each CDW group. Recycled mortars rich in concrete, natural stones and tiles have better mechanical performance than mortars prepared with recycled bricks, perforated bricks and roof tiles. For each RA, RVAMs have superior mechanical characteristics than the corresponding RAM. Since the type and amount of phases contained in recycled aggregates strongly control the mechanical performance of new construction materials, they should be routinely quantified as reported here, in addition to other physical features (water absorption, density, etc.). The separation of heterogeneous CDW into homogeneous RA groups is necessary for the production of new construction materials with stable and predictable performances to ensure CDW recycling, especially in areas hit by major adverse events, where large amounts of still valuable materials could be used for reconstruction processes.

Optimising the Performance of CO2-Cured Alkali-Activated Aluminosilicate Industrial By-Products as Precursors.

Three industrial aluminosilicate wastes were studied as precursors to produce alkali-activated concrete: (i) electric arc furnace slag, (ii) municipal solid waste incineration bottom ashes, and (iii) waste glass rejects. These were characterized via X-ray diffraction and fluorescence, laser particle size distribution, thermogravimetric, and Fourier-transform infrared analyses. Distinctive combinations of anhydrous sodium hydroxide and sodium silicate solution were tried by varying the Na2O/binder ratio (8%, 10%, 12%, 14%) and SiO2/Na2O ratio (0, 0.5, 1.0, 1.5) to find the optimum solution for maximized mechanical performance. Specimens were produced and subjected to a three-step curing process: (1) 24 h thermal curing (70 °C), (2) followed by 21 days of dry curing in a climatic chamber (~21 °C, 65% RH), and (3) ending with a 7-day carbonation curing stage (5 ± 0.2% CO2; 65 ± 10% RH). Compressive and flexural strength tests were performed, to ascertain the mix with the best mechanical performance. The precursors showed reasonable bonding capabilities, thus suggesting some reactivity when alkali-activated due to the presence of amorphous phases. Mixes with slag and glass showed compressive strengths of almost 40 MPa. Most mixes required a higher Na2O/binder ratio for maximized performance, even though, contrary to expectations, the opposite was observed for the SiO2/Na2O ratio.

Systematics and diversification of the Ichthyomyini (Cricetidae, Sigmodontinae) revisited: evidence from molecular, morphological, and combined approaches.

Ichthyomyini, a morphologically distinctive group of Neotropical cricetid rodents, lacks an integrative study of its systematics and biogeography. Since this tribe is a crucial element of the Sigmodontinae, the most speciose subfamily of the Cricetidae, we conducted a study that includes most of its recognized diversity (five genera and 19 species distributed from southern Mexico to northern Bolivia). For this report we analyzed a combined matrix composed of four molecular markers (RBP3, GHR, RAG1, Cytb) and 56 morphological traits, the latter including 15 external, 14 cranial, 19 dental, five soft-anatomical and three postcranial features. A variety of results were obtained, some of which are inconsistent with the currently accepted classification and understanding of the tribe. Ichthyomyini is retrieved as monophyletic, and it is divided into two main clades that are here recognized as subtribes: one to contain the genus Anotomys and the other composed by the remaining genera. Neusticomys (as currently recognized) was found to consist of two well supported clades, one of which corresponds to the original concept of Daptomys. Accordingly, we propose the resurrection of the latter as a valid genus to include several species from low to middle elevations and restrict Neusticomys to several highland forms. Numerous other revisions are necessary to reconcile the alpha taxonomy of ichthyomyines with our phylogenetic results, including placement of the Cajas Plateau water rat (formerly Chibchanomys orcesi) in the genus Neusticomys (sensu stricto), and the recognition of at least two new species (one in Neusticomys, one in Daptomys). Additional work is necessary to confirm other unanticipated results, such as the non-monophyletic nature of Rheomys and the presence of a possible new genus and species from Peru. Our results also suggest that ichthyomyines are one of the main Andean radiations of sigmodontine cricetids, with an evolutionary history dating to the Late Miocene and subsequent cladogenesis during the Pleistocene.

Potential of rainwater harvesting in the retail sector: a case study in Portugal.

Water is a crucial resource for life, and it is increasingly scarce in many regions of the globe. In addition, retail water use is responsible for up to 19% of public water globally supplied. Hence, this study has set out to explore the technical and economic feasibility of rainwater harvesting systems as an alternative water source for a retail store located in southern Portugal. Water consumption data from 2018 to 2021 was collected from water bills, placing average monthly water consumption at around 400 m3. Next, rainfall data was collected from the nearest meteorological station, comprising 54 years of daily rainfall data between 1932 and 2008 with an annual average of 685 mm. The simulation of a rainwater harvesting system was performed, resorting to the mass-balance model. The optimal tank size was found to be 100 m3 considering simply the relation with the relative water savings variation on the graph relating the water savings with the tank size. Results show that the simulated rainwater harvesting system would allow saving 32-36% of the water consumed, despite the store's location in a dry climate, representing a financial gain of €330-372 per month. Findings suggest a substantial potential for the technical and economic feasibility of rainwater systems in retail stores, which makes them relevant solutions to achieve important water-savings in the retail sector, thus positively influencing retailers' direct water footprint.

Six new species of Pristimantis (Anura: Strabomantidae) from Llanganates National Park and Sangay National Park in Amazonian cloud forests of Ecuador.

We describe six new species of rainfrogs of the genus Pristimantis (Strabomantidae) from Amazonian cloud forests in Ecuador. We also present a phylogeny showing the relationships of the new species. The phylogeny is based on mitochondrial genes 16S rRNA (16S), 12 rRNA (12S), NADH-ubiquinone oxidoreductase chain 1 (ND1) and the nuclear gene recombination-activating 1 (RAG1). We also describe the osteology of two of the new species using high-resolution x-ray computed tomography. The new species belong to two clades. The first clade is sister to the subgenus Huicundomantis and includes P. tamia sp. nov., P. miktos, and P. mallii. Pristimantis tamia sp. nov. is morphologically similar to P. miktos, P. mallii, P. martiae, and P. incomptus, but differs from them by lacking vocal slits and tympanic membrane and by having light greenish blue iris. Based in our results we expand the subgenus Huicundomantis to include the P. miktos species group. The second clade is remarkable by being highly divergent and consisting exclusively of new species: P. anaiae sp. nov., P. glendae sp. nov., P. kunam sp. nov., P. resistencia sp. nov., and P. venegasi sp. nov. The new species resemble P. roni, P. yanezi, P. llanganati, P. katoptroides, P. verecundus, and P. mutabilis but can be distinguished from them by lacking vocal slits and tympanic membrane and by having large dark round areas with thin clear borders in the sacral region. All six new species occur in the eastern slopes of the Ecuadorian Andes and are known from a single locality in Llanganates or Sangay National Park. We recommend assigning all of them to the Data Deficient (DD) Red List category. Based in our high-resolution x-ray tomographies, we report the presence of structures that appear to be intercalary elements. This would be the first report of such structures in Terrarana.

Modelling and Optimization for Mortar Compressive Strength Incorporating Heat-Treated Fly Oil Shale Ash as an Effective Supplementary Cementitious Material Using Response Surface Methodology.

Fly oil shale ash (FOSA) is a waste material known for its pozzolanic activity. This study intends to investigate the optimum thermal treatment conditions to use FOSA efficiently as a cement replacement material. FOSA samples were burned in an electric oven for 2, 4, and 6 h at temperatures ranging from 550 °C to 1000 °C with 150 °C intervals. A total of 333 specimens out of 37 different mixes were prepared and tested with cement replacement ratios between 10% and 30%. The investigated properties included the mineralogical characteristics, chemical elemental analysis, compressive strength, and strength activity index for mortar samples. The findings show that the content of SiO2 + Al2O3 + Fe2O3 was less than 70% in all samples. The strength activity index of the raw FOSA at 56 days exceeded 75%. Among all specimens, the calcined samples for 2 h demonstrated the highest pozzolanic activity and compressive strength with a 75% strength activity index. The model developed by RSM is suitable for the interpretation of FOSA in the cementitious matrix with high degrees of correlation above 85%. The optimal compressive strength was achieved at a 30% replacement level, a temperature of 700 °C for 2 h, and after 56 days of curing.

Ternary Blends for Self-Compacting Mortars Production Composed by Electric Arc Furnace Dust and Other Industrial by-Products.

This study is framed within the circular economy model through the valorisation of industrial by-products. This research shows the results of producing self-compacting mortars (SCMs) with electric arc furnace dust (EAFD) and other industrial by-products such as fly ash, conforming (FA) or not conforming (NcFA), from coal-fired power plants, or recovery filler (RF) from hot-mix asphalt plants. Three batches of SCMs, each with one industrial-by product (FA, NcFA, or RF), and three levels of EAFD ratio incorporation (0%, 10%, 20%), were tested. An extra batch with a greater amount of FA was manufactured. When the incorporation ratio of EAFD rose, the mechanical strength decreased, due to the presence of a calcium zinc hydroxide dihydrate phase; nevertheless, this decrease diminished over time. All SCM mixes, except the 40C 40FA 20 EAFD mix, were above 20 MPa at 28 days. All mixes named 70C and 40C reached 40 and 30 MPa, respectively, at 90 days. Mixes with EAFD showed less capillarity and no difference in water absorption by immersion with respect to mixes without EAFD after 91 days. The SCMs designed proved to be stable in terms of leaching of the heavy metals contained in EAFD, where all the hardened SCMs were classified as inert.

Ecotoxicity of Recycled Aggregates: Application of a Prediction Methodology.

Due to environmental concerns, the search for sustainable construction solutions has been increasing over the years. This global concern is creating a trend in the use of recycled aggregates resulting from construction and demolition wastes from different sources. In addition to their physical and mechanical properties, it is important to analyse their ecotoxicological risk to determine whether their leachates might be an issue. To assess ecotoxicity, biological tests should be performed for different trophic levels. This type of test is expensive and needs a high level of expertise, which leads to a lack of studies on recycled aggregates including ecotoxicity analysis. This paper presents a set of predictive ecotoxicity results based on the published studies on recycled aggregates. These results are the outcome of applying an innovative methodology previously developed and validated by the authors aiming to foresee the ecotoxicological fate of building materials' constituents and products. The application of this methodology enables the classification of a recycled aggregate product as safe or unsafe in terms of ecotoxicity risk, while keeping biological testing to a minimum.

Andean non-volant small mammals: A dataset of community assemblages of non-volant small mammals from the high Andes.

Information from diversity inventories was used to study patterns of biodiversity and species distribution, to identify potential priority areas for conservation, and to guide future sampling efforts. In this context, we compiled information on non-volant small mammal communities from the high Andes (>2000 m). Here, we present an open source dataset containing information on diversity (species composition, number of individuals captured), inventory design (type of traps, sampling efforts), and environment (habitat) for both unpublished and published information. This study covers 630 mammalian communities, geographically distributed throughout the Andes in Venezuela, Colombia, Ecuador, Peru, Bolivia, Argentina, and Chile. We compiled a total of 26,412 individual records belonging to 240 species; the order with greatest number of records was Rodentia (n = 25,319, 96.06%), followed by Didelphimorphia (n = 373, 1.42%), Eulipotyphla (n = 358, 1.36%) and Paucituberculata, (n = 307, 1.16%). Andean non-volant small mammal communities harbor a range from 1 to 17 species, with 93.06% of sites being composed of one to five species, 27.78% of sites with species richness varying from 6 to 10 species, and 4.17% sites composed of more than 10 species. Multiple sampling methods were used to survey non-volant small mammals; the most representative methods were snap-traps and Sherman traps, or a combination of both, in more than 81% of the studies. This data paper represents the first large dataset of faunal species inventories for the Andes. There are no copyright restrictions associated with the use of this dataset. Please cite this data paper when its data are used total or partially in research or teaching.

Expert range maps of global mammal distributions harmonised to three taxonomic authorities.

Aim: Comprehensive, global information on species' occurrences is an essential biodiversity variable and central to a range of applications in ecology, evolution, biogeography and conservation. Expert range maps often represent a species' only available distributional information and play an increasing role in conservation assessments and macroecology. We provide global range maps for the native ranges of all extant mammal species harmonised to the taxonomy of the Mammal Diversity Database (MDD) mobilised from two sources, the Handbook of the Mammals of the World (HMW) and the Illustrated Checklist of the Mammals of the World (CMW). Location: Global. Taxon: All extant mammal species. Methods: Range maps were digitally interpreted, georeferenced, error-checked and subsequently taxonomically aligned between the HMW (6253 species), the CMW (6431 species) and the MDD taxonomies (6362 species). Results: Range maps can be evaluated and visualised in an online map browser at Map of Life (mol.org) and accessed for individual or batch download for non-commercial use. Main conclusion: Expert maps of species' global distributions are limited in their spatial detail and temporal specificity, but form a useful basis for broad-scale characterizations and model-based integration with other data. We provide georeferenced range maps for the native ranges of all extant mammal species as shapefiles, with species-level metadata and source information packaged together in geodatabase format. Across the three taxonomic sources our maps entail, there are 1784 taxonomic name differences compared to the maps currently available on the IUCN Red List website. The expert maps provided here are harmonised to the MDD taxonomic authority and linked to a community of online tools that will enable transparent future updates and version control.

Unlocking Andean sigmodontine diversity: five new species of Chilomys (Rodentia: Cricetidae) from the montane forests of Ecuador.

The Andean cloud forests of Ecuador are home to several endemic mammals. Members of the Thomasomyini rodents are well represented in the Andes, with Thomasomys being the largest genus (47 species) of the subfamily Sigmodontinae. Within this tribe, however, there are genera that have escaped a taxonomic revision, and Chilomys Thomas, 1897, constitutes a paradigmatic example of these "forgotten" Andean cricetids. Described more than a century ago, current knowledge of this externally unmistakable montane rodent is very limited, and doubts persist as to whether or not it is monotypic. After several years of field efforts in Ecuador, a considerable quantity of specimens of Chilomys were collected from various localities representing both Andean chains. Based on an extensive genetic survey of the obtained material, we can demonstrate that what is currently treated as C. instans in Ecuador is a complex comprising at least five new species which are described in this paper. In addition, based on these noteworthy new evidence, we amend the generic diagnosis in detail, adding several key craniodental traits such as incisor procumbency and microdonty. These results indicate that Chilomys probably has a hidden additional diversity in large parts of the Colombian and Peruvian territories, inviting a necessary revision of the entire genus.

Improvement of the Quality of Recycled Concrete Aggregate Subjected to Chemical Treatments: A Review.

The main factor that alters the quality of recycled concrete aggregate (RCA) is the paste adhered to the natural aggregate (NA). Since it causes weakening of the interfacial transition zone (ITZ) between the aggregate and the cementitious paste, it becomes a determining factor for the mechanical behavior of concrete. It turns out that it is critical to enhance this interface by improving the surface of the aggregate or by removing the paste adhered to the NA. Considering the variety of methods for removing paste adhered to RCA-namely using acids such as hydrochloric acid (HCl), sulfuric acid (H2SO4), and phosphoric acid (H3PO4), among others-this paper presents a review of treatments for the removal of adhered paste using acidic solutions on the RCA, and their influence on the mechanical properties and durability of concrete produced with RCA. Pearson's correlation was used in the statistical analysis to determine the linear relationship of the main factors-for instance, immersion time, acidic solution, and aggregate size-involved in the removal of the paste in the RCA.

Aves de la cordillera del Kutukú, Morona Santiago, sureste de Ecuador / Birds of the Cordillera del Kutukú, Morona Santiago, Southeastern Ecuador

Resumen La cordillera del Kutukú está ubicada al sureste de Ecuador y se encuentra parcialmente aislada de la cordillera de los Andes. Realizamos cinco expediciones a este macizo, donde obtuvimos de manera directa información referente a la riqueza de aves. Además, con el fin de generar un listado más completo, realizamos una recopilación de registros publicados y revisamos colecciones de museos ecuatorianos. En total registramos 501 especies de aves, en un rango entre 500 - 2300 m de altitud. Encontramos trece especies con nuevas ampliaciones de distribución altitudinal y/o latitudinal. Veintiséis especies de aves (5.2%) están en alguna categoría de amenaza a su conservación, a nivel mundial y nacional. Las escasas vías de acceso, sumadas a las políticas de ingreso al territorio, por parte de la etnia Shuar, han favorecido la preservación de los bosques, especialmente aquellos por encima de los 1800 m. Es así que, el conocimiento biológico de esta área queda aún por descubrir. Esta zona remota protege una importante diversidad, así como poblaciones de aves amenazadas, recursos hídricos, además del territorio y cultura de las comunidades que la habitan. Desafortunadamente la totalidad de la cordillera se encuentra concesionada para exploraciones de proyectos mineros. Por tanto, se requiere la atención de las autoridades regionales y nacionales para aunar esfuerzos que aseguren su conservación y exploración biológica.

Abstract The cordillera del Kutukú is located in the southeastern Ecuador and is partially isolated from the Andes mountain range. We conducted five field expeditions to the region, where we directly obtained information regarding the richness of birds. In addition, we compile bird richness data from published records and Ecuadorian museum's collections in order to provide an updated list. A total of 501 bird species were registered, in an elevation range from 500 to 2.300 m a.s.l. We found 13 species with new latitudinal and/or longitudinal distribution extensions. Twenty-six species (5.2%) are in an elevated risk category nationally or globally. The region's limited roads, added to the Shuar ethnic group policies for entering to their territory has aided in the conservation of forests, especially those over 1800 m a.s.l. Thus, the biological knowledge of this area remains to be discovered. This remote area protects an important diversity, as well as threatened bird populations, water resources, territory and culture of the indigenous groups that inhabit it. However, unfortunately the entire mountain range is under concession for exploration of mining projects. Therefore, the attention of regional and national authorities is required to join efforts to ensure their conservation and biological exploration.

Recycled Aggregates Produced from Construction and Demolition Waste for Structural Concrete: Constituents, Properties and Production.

This paper concerns the recovery of construction and demolition waste as coarse recycled aggregates for concrete. Coarse recycled aggregates may be used as a partial or total replacement of natural aggregates, contributing to the circular economy and minimizing landfill disposals as well as the consumption of natural mineral resources. However, construction and demolition waste is a heterogeneous material with undefined quality and the processing of this waste into recycled aggregates needs to ensure that the recycled aggregates have suitable properties for concrete. This paper summarizes several aspects related to coarse recycled aggregates, specifically addressing: (i) the typical composition of construction and demolition waste; (ii) the influence of different types of constituents on the properties of recycled aggregates and recycled aggregate concrete; (iii) requirements for recycled aggregates to be used in concrete; and (iv) production methods of recycled aggregates. It is argued that coarse recycled aggregates are a suitable construction material with adequate quality, even when common equipment is used in their production and preliminary separation as a key operation for ensuring the quality of the aggregates is recommended.