Toxin release by conditional remodelling of ParDE1 from Mycobacterium tuberculosis leads to gyrase inhibition.

Mycobacterium tuberculosis, the causative agent of tuberculosis, is a growing threat to global health, with recent efforts towards its eradication being reversed in the wake of the COVID-19 pandemic. Increasing resistance to gyrase-targeting second-line fluoroquinolone antibiotics indicates the necessity to develop both novel therapeutics and our understanding of M. tuberculosis growth during infection. ParDE toxin-antitoxin systems also target gyrase and are regulated in response to both host-associated and drug-induced stress during infection. Here, we present microbiological, biochemical, structural, and biophysical analyses exploring the ParDE1 and ParDE2 systems of M. tuberculosis H37Rv. The structures reveal conserved modes of toxin-antitoxin recognition, with complex-specific interactions. ParDE1 forms a novel heterohexameric ParDE complex, supported by antitoxin chains taking on two distinct folds. Curiously, ParDE1 exists in solution as a dynamic equilibrium between heterotetrameric and heterohexameric complexes. Conditional remodelling into higher order complexes can be thermally driven in vitro. Remodelling induces toxin release, tracked through concomitant inhibition and poisoning of gyrase activity. Our work aids our understanding of gyrase inhibition, allowing wider exploration of toxin-antitoxin systems as inspiration for potential therapeutic agents.

CBT for difficult-to-treat depression: self-regulation model.

BACKGROUND: Cognitive behavioural therapy (CBT) is an effective treatment for depression but a significant minority of clients do not complete therapy, do not respond to it, or subsequently relapse. Non-responders, and those at risk of relapse, are more likely to have adverse childhood experiences, early-onset depression, co-morbidities, interpersonal problems and heightened risk. This is a heterogeneous group of clients who are currently difficult to treat. AIM: The aim was to develop a CBT model of depression that will be effective for difficult-to-treat clients who have not responded to standard CBT. METHOD: The method was to unify theory, evidence and clinical strategies within the field of CBT to develop an integrated CBT model. Single case methods were used to develop the treatment components. RESULTS: A self-regulation model of depression has been developed. It proposes that depression is maintained by repeated interactions of self-identity disruption, impaired motivation, disengagement, rumination, intrusive memories and passive life goals. Depression is more difficult to treat when these processes become interlocked. Treatment based on the model builds self-regulation skills and restructures self-identity, rather than target negative beliefs. A bespoke therapy plan is formed out of ten treatment components, based on an individual case formulation. CONCLUSIONS: A self-regulation model of depression is proposed that integrates theory, evidence and practice within the field of CBT. It has been developed with difficult-to-treat cases as its primary purpose. A case example is described in a concurrent article (Barton et al., 2022) and further empirical tests are on-going.

Allophycocyanin A is a carbon dioxide receptor in the cyanobacterial phycobilisome.

Light harvesting is fundamental for production of ATP and reducing equivalents for CO2 fixation during photosynthesis. However, electronic energy transfer (EET) through a photosystem can harm the photosynthetic apparatus when not balanced with CO2. Here, we show that CO2 binding to the light-harvesting complex modulates EET in photosynthetic cyanobacteria. More specifically, CO2 binding to the allophycocyanin alpha subunit of the light-harvesting complex regulates EET and its fluorescence quantum yield in the cyanobacterium Synechocystis sp. PCC 6803. CO2 binding decreases the inter-chromophore distance in the allophycocyanin trimer. The result is enhanced EET in vitro and in live cells. Our work identifies a direct target for CO2 in the cyanobacterial light-harvesting apparatus and provides insights into photosynthesis regulation.

Stabilising Peptoid Helices Using Non-Chiral Fluoroalkyl Monomers.

Stability towards protease degradation combined with modular synthesis has made peptoids of considerable interest in the fields of chemical biology, medicine, and biomaterials. Given their tertiary amide backbone, peptoids lack the capacity to hydrogen-bond, and as such, controlling secondary structure can be challenging. The incorporation of bulky, charged, or chiral aromatic monomers can be used to control conformation but such building blocks limit applications in many areas. Through NMR and X-ray analysis we demonstrate that non-chiral neutral fluoroalkyl monomers can be used to influence the Kcis/trans equilibria of peptoid amide bonds in model systems. The cis-isomer preference displayed is highly unprecedented given that neither chirality nor charge is used to control the peptoid amide conformation. The application of our fluoroalkyl monomers in the design of a series of linear peptoid oligomers that exhibit stable helical structures is also reported.

Excited-State Aromatic Interactions in the Aggregation-Induced Emission of Molecular Rotors.

Small, apolar aromatic groups, such as phenyl rings, are commonly included in the structures of fluorophores to impart hindered intramolecular rotations, leading to desirable solid-state luminescence properties. However, they are not normally considered to take part in through-space interactions that influence the fluorescent output. Here, we report on the photoluminescence properties of a series of phenyl-ring molecular rotors bearing three, five, six, and seven phenyl groups. The fluorescent emissions from two of the rotors are found to originate, not from the localized excited state as one might expect, but from unanticipated through-space aromatic-dimer states. We demonstrate that these relaxed dimer states can form as a result of intra- or intermolecular interactions across a range of environments in solution and solid samples, including conditions that promote aggregation-induced emission. Computational modeling also suggests that the formation of aromatic-dimer excited states may account for the photophysical properties of a previously reported luminogen. These results imply, therefore, that this is a general phenomenon that should be taken into account when designing and interpreting the fluorescent outputs of luminescent probes and optoelectronic devices based on fluorescent molecular rotors.

Construction of a Chassis for a Tripartite Protein-Based Molecular Motor.

Improving our understanding of biological motors, both to fully comprehend their activities in vital processes, and to exploit their impressive abilities for use in bionanotechnology, is highly desirable. One means of understanding these systems is through the production of synthetic molecular motors. We demonstrate the use of orthogonal coiled-coil dimers (including both parallel and antiparallel coiled coils) as a hub for linking other components of a previously described synthetic molecular motor, the Tumbleweed. We use circular dichroism, analytical ultracentrifugation, dynamic light scattering, and disulfide rearrangement studies to demonstrate the ability of this six-peptide set to form the structure designed for the Tumbleweed motor. The successful formation of a suitable hub structure is both a test of the transferability of design rules for protein folding as well as an important step in the production of a synthetic protein-based molecular motor.

Structural characterization suggests models for monomeric and dimeric forms of full-length ezrin.

Ezrin is a member of the ERM (ezrin-radixin-moesin) family of proteins that have been conserved through metazoan evolution. These proteins have dormant and active forms, where the latter links the actin cytoskeleton to membranes. ERM proteins have three domains: an N-terminal FERM [band Four-point-one (4.1) ERM] domain comprising three subdomains (F1, F2, and F3); a helical domain; and a C-terminal actin-binding domain. In the dormant form, FERM and C-terminal domains form a stable complex. We have determined crystal structures of the active FERM domain and the dormant FERM:C-terminal domain complex of human ezrin. We observe a bistable array of phenylalanine residues in the core of subdomain F3 that is mobile in the active form and locked in the dormant form. As subdomain F3 is pivotal in binding membrane proteins and phospholipids, these transitions may facilitate activation and signaling. Full-length ezrin forms stable monomers and dimers. We used small-angle X-ray scattering to determine the solution structures of these species. As expected, the monomer shows a globular domain with a protruding helical coiled coil. The dimer shows an elongated dumbbell structure that is twice as long as the monomer. By aligning ERM sequences spanning metazoan evolution, we show that the central helical region is conserved, preserving the heptad repeat. Using this, we have built a dimer model where each monomer forms half of an elongated antiparallel coiled coil with domain-swapped FERM:C-terminal domain complexes at each end. The model suggests that ERM dimers may bind to actin in a parallel fashion.

Construction and characterization of kilobasepair densely labeled peptide-DNA.

Directed assembly of biocompatible materials benefits from modular building blocks in which structural organization is independent of introduced functional modifications. For soft materials, such modifications have been limited. Here, long DNA is successfully functionalized with dense decoration by peptides. Following introduction of alkyne-modified nucleotides into kilobasepair DNA, measurements of persistence length show that DNA mechanics are unaltered by the dense incorporation of alkynes (∼1 alkyne/2 bp) and after click-chemistry attachment of a tunable density of peptides. Proteolytic cleavage of densely tethered peptides (∼1 peptide/3 bp) demonstrates addressability of the functional groups, showing that this accessible approach to creating hybrid structures can maintain orthogonality between backbone mechanics and overlaid function. The synthesis and characterization of these hybrid constructs establishes the groundwork for their implementation in future applications, such as building blocks in modular approaches to a range of problems in synthetic biology.

Squaring the circle in peptide assembly: from fibers to discrete nanostructures by de novo design.

The design of bioinspired nanostructures and materials of defined size and shape is challenging as it pushes our understanding of biomolecular assembly to its limits. In such endeavors, DNA is the current building block of choice because of its predictable and programmable self-assembly. The use of peptide- and protein-based systems, however, has potential advantages due to their more-varied chemistries, structures and functions, and the prospects for recombinant production through gene synthesis and expression. Here, we present the design and characterization of two complementary peptides programmed to form a parallel heterodimeric coiled coil, which we use as the building blocks for larger, supramolecular assemblies. To achieve the latter, the two peptides are joined via peptidic linkers of variable lengths to produce a range of assemblies, from flexible fibers of indefinite length, through large colloidal-scale assemblies, down to closed and discrete nanoscale objects of defined stoichiometry. We posit that the different modes of assembly reflect the interplay between steric constraints imposed by short linkers and the bulk of the helices, and entropic factors that favor the formation of many smaller objects as the linker length is increased. This approach, and the resulting linear and proteinogenic polypeptides, represents a new route for constructing complex peptide-based assemblies and biomaterials.

A basis set of de novo coiled-coil peptide oligomers for rational protein design and synthetic biology.

Protein engineering, chemical biology, and synthetic biology would benefit from toolkits of peptide and protein components that could be exchanged reliably between systems while maintaining their structural and functional integrity. Ideally, such components should be highly defined and predictable in all respects of sequence, structure, stability, interactions, and function. To establish one such toolkit, here we present a basis set of de novo designed α-helical coiled-coil peptides that adopt defined and well-characterized parallel dimeric, trimeric, and tetrameric states. The designs are based on sequence-to-structure relationships both from the literature and analysis of a database of known coiled-coil X-ray crystal structures. These give foreground sequences to specify the targeted oligomer state. A key feature of the design process is that sequence positions outside of these sites are considered non-essential for structural specificity; as such, they are referred to as the background, are kept non-descript, and are available for mutation as required later. Synthetic peptides were characterized in solution by circular-dichroism spectroscopy and analytical ultracentrifugation, and their structures were determined by X-ray crystallography. Intriguingly, a hitherto widely used empirical rule-of-thumb for coiled-coil dimer specification does not hold in the designed system. However, the desired oligomeric state is achieved by database-informed redesign of that particular foreground and confirmed experimentally. We envisage that the basis set will be of use in directing and controlling protein assembly, with potential applications in chemical and synthetic biology. To help with such endeavors, we introduce Pcomp, an on-line registry of peptide components for protein-design and synthetic-biology applications.

Time-dependent motor properties of multipedal molecular spiders.

Molecular spiders are synthetic biomolecular walkers that use the asymmetry resulting from cleavage of their tracks to bias the direction of their stepping motion. Using Monte Carlo simulations that implement the Gillespie algorithm, we investigate the dependence of the biased motion of molecular spiders, along with binding time and processivity, on tunable experimental parameters, such as number of legs, span between the legs, and unbinding rate of a leg from a substrate site. We find that an increase in the number of legs increases the spiders' processivity and binding time but not their mean velocity. However, we can increase the mean velocity of spiders with simultaneous tuning of the span and the unbinding rate of a spider leg from a substrate site. To study the efficiency of molecular spiders, we introduce a time-dependent expression for the thermodynamic efficiency of a molecular motor, allowing us to account for the behavior of spider populations as a function of time. Based on this definition, we find that spiders exhibit transient motor function over time scales of many hours and have a maximum efficiency on the order of 1%, weak compared to other types of molecular motors.

Tuning the performance of an artificial protein motor.

The Tumbleweed (TW) is a concept for an artificial, tri-pedal, protein-based motor designed to move unidirectionally along a linear track by a diffusive tumbling motion. Artificial motors offer the unique opportunity to explore how motor performance depends on design details in a way that is open to experimental investigation. Prior studies have shown that TW's ability to complete many successive steps can be critically dependent on the motor's diffusional step time. Here, we present a simulation study targeted at determining how to minimize the diffusional step time of the TW motor as a function of two particular design choices: nonspecific motor-track interactions and molecular flexibility. We determine an optimal nonspecific interaction strength and establish a set of criteria for optimal molecular flexibility as a function of the nonspecific interaction. We discuss our results in the context of similarities to biological, linear stepping diffusive molecular motors with the aim of identifying general engineering principles for protein motors.

Alpha-helical peptide assemblies giving new function to designed structures.

The design of alpha-helical tectons for self-assembly is maturing as a science. We have now reached the point where many different coiled-coil topologies can be reliably produced and validated in synthetic systems and the field is now moving on towards more complex, discrete structures and applications. Similarly the design of infinite or fiber assemblies has also matured, with the creation fibers that have been modified or functionalized in a variety of ways. This chapter discusses the progress made in both of these areas as well as outlining the challenges still to come.

Biochemical characterization of Sfh-I, a subclass B2 metallo-beta-lactamase from Serratia fonticola UTAD54.

The subclass B2 metallo-ß-lactamase (MBL) Sfh-I from Serratia fonticola UTAD54 was cloned and overexpressed in Escherichia coli. The recombinant protein binds one equivalent of zinc, as shown by mass spectrometry, and preferentially hydrolyzes carbapenem substrates. However, compared to other B2 MBLs, Sfh-I also shows limited hydrolytic activity against some additional substrates and is not inhibited by a second equivalent of zinc. These data confirm Sfh-I to be a subclass B2 metallo-ß-lactamase with some distinctive properties.

Crystal structure of Serratia fonticola Sfh-I: activation of the nucleophile in mono-zinc metallo-ß-lactamases.

Metallo-ß-lactamases (MBLs) or class B ß-lactamases are zinc-dependent enzymes capable of inactivating almost all classes of ß-lactam antibiotics. To date, no MBL inhibitors are available for clinical use. Of the three MBL subclasses, B2 enzymes, unlike those from subclasses B1 and B3, are fully active with one zinc ion bound and possess a narrow spectrum of activity, hydrolyzing carbapenem substrates almost exclusively. These remain the least studied MBLs. Sfh-I, originally identified from the aquatic bacterium Serratia fonticola UTAD54, is a divergent member of this group. Previous B2 MBL structures, available only for the CphA enzyme from Aeromonas hydrophila, all contain small molecules bound in their active sites. In consequence, the mechanism by which these enzymes activate the water nucleophile required for ß-lactam hydrolysis remains to be unambiguously established. Here we report crystal structures of Sfh-I as a complex with glycerol and in the unliganded form, revealing for the first time the disposition of water molecules in the B2 MBL active site. Our data indicate that the hydrolytic water molecule is activated by His118 rather than by Asp120 and/or zinc. Consistent with this proposal, we show that the environment of His118 in B2 MBLs is distinct from that of the B1 and B3 enzymes, where this residue acts as a zinc ligand, and offer a structure-based mechanism for ß-lactam hydrolysis by these enzymes.

Structural insights into quinolone antibiotic resistance mediated by pentapeptide repeat proteins: conserved surface loops direct the activity of a Qnr protein from a gram-negative bacterium.

Quinolones inhibit bacterial type II DNA topoisomerases (e.g. DNA gyrase) and are among the most important antibiotics in current use. However, their efficacy is now being threatened by various plasmid-mediated resistance determinants. Of these, the pentapeptide repeat-containing (PRP) Qnr proteins are believed to act as DNA mimics and are particularly prevalent in gram-negative bacteria. Predicted Qnr-like proteins are also present in numerous environmental bacteria. Here, we demonstrate that one such, Aeromonas hydrophila AhQnr, is soluble, stable, and relieves quinolone inhibition of Escherichia coli DNA gyrase, thus providing an appropriate model system for gram-negative Qnr proteins. The AhQnr crystal structure, the first for any gram-negative Qnr, reveals two prominent loops (1 and 2) that project from the PRP structure. Deletion mutagenesis demonstrates that both contribute to protection of E. coli DNA gyrase from quinolones. Sequence comparisons indicate that these are likely to be present across the full range of gram-negative Qnr proteins. On this basis we present a model for the AhQnr:DNA gyrase interaction where loop1 interacts with the gyrase A 'tower' and loop2 with the gyrase B TOPRIM domains. We propose this to be a general mechanism directing the interactions of Qnr proteins with DNA gyrase in gram-negative bacteria.

Assembly pathway of a designed alpha-helical protein fiber.

Interest in the design of peptide-based fibrous materials is growing because it opens possibilities to explore fundamental aspects of peptide self-assembly and to exploit the resulting structures--for example, as scaffolds for tissue engineering. Here we investigate the assembly pathway of self-assembling fibers, a rationally designed alpha-helical coiled-coil system comprising two peptides that assemble on mixing. The dimensions spanned by the peptides and final structures (nanometers to micrometers), and the timescale over which folding and assembly occur (seconds to hours), necessitate a multi-technique approach employing spectroscopy, analytical ultracentrifugation, electron and light microscopy, and protein design to produce a physical model. We show that fibers form via a nucleation and growth mechanism. The two peptides combine rapidly (in less than seconds) to form sticky ended, partly helical heterodimers. A lag phase follows, on the order of tens of minutes, and is concentration-dependent. The critical nucleus comprises six to eight partially folded dimers. Growth is then linear in dimers, and subsequent fiber growth occurs in hours through both elongation and thickening. At later times (several hours), fibers grow predominantly through elongation. This kinetic, biomolecular description of the folding-and-assembly process allows the self-assembling fiber system to be manipulated and controlled, which we demonstrate through seeding experiments to obtain different distributions of fiber lengths. This study and the resulting mechanism we propose provide a potential route to achieving temporal control of functional fibers with future applications in biotechnology and nanoscale science and technology.

Flow linear dichroism of some prototypical proteins.

Flow linear dichroism (LD) spectroscopy provides information on the orientation of molecules in solution and hence on the relative orientation of parts of molecules. Long molecules such as fibrous proteins can be aligned in Couette flow cells and characterized using LD. We have measured using Couette flow and calculated from first principles the LD of proteins representing prototypical secondary structure classes: a self-assembling fiber and tropomyosin (all-alpha-helical), FtsZ (an alphabeta protein), an amyloid fibril (beta-sheet), and collagen [poly(proline)II helices]. The combination of calculation and experiment allows elucidation of the protein orientation in the Couette flow and the orientation of chromophores within the protein fibers.

The Tumbleweed: towards a synthetic proteinmotor.

Biomolecular motors have inspired the design and construction of artificial nanoscale motors and machines based on nucleic acids, small molecules, and inorganic nanostructures. However, the high degree of sophistication and efficiency of biomolecular motors, as well as their specific biological function, derives from the complexity afforded by protein building blocks. Here, we discuss a novel bottom-up approach to understanding biological motors by considering the construction of synthetic protein motors. Specifically, we present a design for a synthetic protein motor that moves along a linear track, dubbed the "Tumbleweed." This concept uses three discrete ligand-dependent DNA-binding domains to perform cyclically ligand-gated, rectified diffusion along a synthesized DNA molecule. Here we describe how de novo peptide design and molecular biology could be used to produce the Tumbleweed, and we explore the fundamental motor operation of such a design using numerical simulations. The construction of this and more sophisticated protein motors is an exciting challenge that is likely to enhance our understanding of the structure-function relationship in biological motors.